Automotive, Vehicles & Transportation

Ct-G530P utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built- in DSP and extremely low power consumption, the family can get fast location fixes for geo- tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different application - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

Ct-G354 of products utilized SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection - MMCX RF Connect Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical ‧signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start.

Key Features •Concurrent processing of 3 GNSS (GLONASS, GPS, GALILEO) •Support SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM) •44 tracking channels •Standalone and code-differential (RTCM SC104 v2.3) operation modes •1PPS output for precise timing applications •Binary and NMEA data outputs •Positioning update rate up to 10 Hz •Built-in antenna monitor to track open and short antenna connections Product description The GeoS-5M is based on the high performance G5 GNSS engine designed by our company. The GeoS-5M module is capable of tracking and processing with three GNSS (GLONASS, GPS, GALILEO) and SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM) signals concurrently, which is especially beneficial in difficult environments such as urban canyons or under tree canopy. Extended ephemeris technology allows the user to get position fix quickly after power-up (within 10 s) with acceptable accuracy. The GeoS-5M features auxiliary functionality such as Data logger, Odometer and Geofencing for easy integration to customer applications. The GeoS-5M supports two dynamic modes: standard (default) with acceleration up to 4 g and high dynamic (optional) with acceleration up to 25 g.Communication with the module is accomplished through a dual serial interface (DUART) that supports NMEA 0183 v4.10 and GSN binary data protocol. 1PPS output enables the use of the module in precise timing applications. Modules are offered in 14.3x13.7 mm 24-pad LCC package.

Ct-G551 3.3V utilizes SiRFstarV ™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built- in DSP and extremely low power consumption, the family can get fast location fixes for geo- tagging images or videos, asset tracking and wearable applications. Premium on-chip software provides a new level of continuous location awareness by employing the following advanced technology : ‧Advanced power management allow the GNSS receiver to stay in a hot-start condition nearly continuously while consuming very little power. ‧Local or server generated ephemeris prediction, from three days to one month in advance boost sensitivity and performance. Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - <10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection - Dimension : 15 x 14 x 2.8mm Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as : - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X ‧It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. ‧Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) ‧Support SiRFaware™ technology ‧Support adaptive “Micro Power Controller” power management mode. ‧<10mW TricklePower™, so user can leave power on all day instead of power off. ‧Suitable for battery drive devices that need lower power consumption application ‧Ideal for high volume mass production(Taping reel package)

Wire Harness Probe Test Pin CH200 for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CH200 harness probe we will introduce here is 1.99 mm in diameter and 36 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4.6 mm at most when this probe works, although the plunger can move as far as 6.7 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4.6 mm, its loaded force is about 213 gf, namely 7.5 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 6.7 mm Rated Stroke: 4.6 mm Spring Force: 213±64 gf (7.5 oz) at load 4.6 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Cable Harness Probe Pogo Pin CHZ200 for Electronic Test Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHZ200 harness probe we will introduce here is 2.02 mm in diameter and 33 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 2.67 mm at most when this probe works, although the plunger can move as far as 4 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 2.67 mm, its loaded force is about 74 gf, namely 2.6 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 4 mm Rated Stroke: 2.67 mm Spring Force: 74±22 gf (2.6 oz) at load 2.67 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

High-current Probe Pogo Pin P264 Series for Electronic Test Cable harness test probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. Their standard and requirements are higher than other series of test probes. They can be divided into screw-thread harness test probes, cable harness switch probes, non-screw-thread harness test probes, position-limited harness test probes and cable harness high-current probes, etc. High-current probes can withstand high current and high temperature in the tests. They are mainly applied to the in-circuit test field of high temperature and high current environments. High-current probes manufactured by Centalic mainly include P203, P264, P265, P350 and P420, etc. There is a fixed schedule for mass production of P264-HP-7G(B). This probe can withstand the current up to 24 Amps. And its typical maximum contact resistance is 50 milliohms. The materials used for the construction of this high-current test probe are different for each component: The barrel is made of brass. Subsequently gold and nickel plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold and nickel plated. For details, please check parameters in below table. Technical Specifications Recommended Current Rating: 24 amps, continuous Contact Resistance: 50 milliohms, max Full Stroke: 5.3 mm Rated Stroke: 3.5 mm Spring Force: 200 gf( 7 oz) at load 3.5 mm Materials (Plated) Contact Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information: Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Cable Harness Probe Pogo Pin CHL265 for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHL265 harness probe we will introduce here is 2.65 mm in diameter and 28.4 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 100 milliohms. It is suggested the plunger be pressed at a distance of 3.5 mm at most when this probe works, although the plunger can move as far as 5.5 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 3.5 mm, its loaded force is about 113 gf, namely 4 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 100 milliohms Full Stroke: 5.5 mm Rated Stroke: 3.5 mm Spring Force: 113±35 gf (4 oz) at load 3.5 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Wire Harness Probe Pogo Pin CHD136 for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHD136 harness probe we will introduce here is 1.36 mm in diameter and 33 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of gold-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4.6 mm at most when this probe works, although the plunger can move as far as 7 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4.6 mm, its loaded force is about 255 gf, namely 9 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 7 mm Rated Stroke: 4.6 mm Spring Force: 255±75 gf (9 oz) at load 4.6 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated For more information, please check below catalog. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

UPS rack mount power supply, also called rack mount uninterruptible power supply, has small size, large capacity and high efficiency that can meet the needs of high power density! DSP series (1-80KVA) Why choose SCU rack mountable UPS? SCU DSP series ups power supply rack mount and lithium-ion battery combined has below great features. Lithium-ion battery access Bi-directional active equalization BMS control; Perfect battery charge and discharge management strategy; Parallel battery pack to extend backup time; Good performance ECO mode, efficiency 99%; 19 inch rack mount UPS design; Isolation of cold and hot air duct, stepless speed control; Manageability The rack-mounted UPS power supply has LCD display, which provides easy-to-read status; EPO remote emergency power off interface; Built-in parallel kit, only parallel line is needed to achieve 1+1 parallel 10kva Rack Mount UPS Power Supply Specifications Model DSP-10KVA-LI DSP-15KVA-LI DSP-20KVA-LI Mains input Input mode 3Ph+N+PE Input voltage 380V/400V/415V Input frequency 50Hz±10%、60Hz±10% Input PF 0．99 Lithium ion pack Battery capacity ECM-240B10P4；240V/10AH Battery number 2 Back up time 30mins 20mins 10mins BMS Bidirectional Active Equalization AC output Output voltage 220V/230V/240V；380V/400V/415V Output PF 0.9 Overload Operate 10mins with 125% load AC/AC efficiency ≥94% at online mode；≥99% at ECO mode； As a reliable uninterruptible power supply factory, we will do our best to meet all the needs of customers.

SCU, a professional modular ups system supplier in China, can provide high- quality modular type ups at a competitive price. Our modular UPS systems provide a good solution of modular uninterruptible power supply protection for IT data security. CMS series (30-900KVA) Modular UPS Systems Advantages As a pioneer and leader of the modular UPS manufacturers in China, SCU-produced modular UPS systems or li-ion UPS modular technology is your great choice. We offer our business partners the most flexible and competitive modular UPS solution, with power modules 6kVA, 15kW, 30kW, 50kW UPS and 75kW, and modular UPS systems 12~30kVA, 60kW~900kW, then 4 units parallel up to 3.6MW, and available with modular lithium battery solutions. Being a professional UPS supplier, SCU provides modular UPS systems which has been protecting clients’ business for over 20 years from small IT networks to 1MW-100MW data centers. Superior Reliability Modular UPS power module has multi-level decentralized control technology; Flexible redundancy： N+1,N+X, 2N Physical isolation of cold and hot air ducts; Support lithium ion ups battery access. Excellent Energy Saving 96.5% efficiency at online double conversion mode; 99% efficiency at IECO mode; Output PF 1, high load capacity; Module sleep function ensures the modular best industrial ups system always works in the best efficiency state. High Availability Generator Compatible; UPS modular type, standardized design; The modular UPS systems are compatible with solar battery solutions; Pay as grow, reduce the total cost of ownership (TCO) Hot swap, quick repair and expansion; Small footprint, high power density. 30-120kva Modular UPS Specifications Model / capacity CMS-30/15(30kVA); CMS-60/15(60kVA); CMS-120/15(120 KVA); Power module Model / capacity CM15；15kVA/15kW Mains input Input mode 3Ph+N+PE Rated input voltage 380V/220V AC、400V/230V   AC、415V/240V AC Input frequency 50Hz±10%、60Hz±10% Input PF ≥ 0.99 DC input Rated input voltage ±240V DC Input voltage range ±160V~±330V AC output Output PF 1 Output voltage 380V/220V AC、400V/230V   AC、415V/240V AC Overload Operate 10mins with 125% load Efficiency ≥96% Communication function Modbus、SNMP、dry contact We can offer kinds of ups power supply for sale for sale, if you have needs, please contact us.

UPS for Industrial Use The industrial UPS systems produced by SCU, a professional UPS supplier, are specially designed for industrial application with high performance, high efficiency and high protection level. The UPS industrial system provides uninterrupted high-quality industrial uninterruptible power supply for modern manufacturing. If you are looking for different UPS for industry, contact us for more info about the UPS industrial specifications. DSM series (80-640KVA) DSM Industrial UPS Systems, A Robust UPS for Industrial Applications As a leading UPS supplier in China, SCU provides DSM series industrial uninterruptible power supply that has super power grid adaptability and load capacity, higher protection level and multiple operation modes. In modern industry, the electrical environment is more complex, and the common problems such as voltage sag, surge and load fluctuation lead to abnormal operation of electromechanical, transmission and electronic equipment. DSM UPS for industry use is more robust and durable, and can fully guarantee the power quality of key loads. Stable performance The industrial UPS systems have a three-phase no neutral design to solve zero ground voltage; Standardized and modular design, supporting 4 units UPS for industry in parallel; Super load capacity, output power factor 0.9; Support lithium-ion battery UPS access. Powerful functions The UPS for industry has voltage conditioning features that are adaptable to varied input and output voltage requirements; Compatibility for diverse industrial environments and applications; Flexibility in configuration and installation specific to various UPS systems in industrial applications. High adaptability The cold and hot air ducts of the industrial uninterruptible power supply operate in isolation; Protection level IP40, to reduce the influence of environmental factors; Configure output isolation transformer to realize electrical isolation. Industrial UPS Systems Specifications Model / Capacity DSM80D(80kVA);DSM160D(160kVA);DSM240D(240kVA); DSM320D(320kVA); DSM400D(400kVA); DSM480D(480kVA); DSM560D(560kVA); DSM640D(640kVA) AC input Input mode 3Ph+N+PE Rated input voltage 380V/400V/415V 480V 220V/208V Input frequency 50Hz±10%、60Hz±10% Input PF ≥0.99 DC input Rated input voltage 384V DC AC output Output PF 0.9 Output voltage 380V/220V AC 400V/230V AC 415V/240V AC   480V AC 220V/128V AC 208V/120V AC Overload capacity Operate 10mins with 150% load AC/AC efficiency ≥96% Remark UPS adapts to 208 / 120V and 220 / 128v mode, and its output power is reduced by half; As an uninterruptible power supply manufacturer, we can offer kinds of related products for sale, anything you need, please leave us a message.

With 20 years of R&D experience in UPS industry, SCU, one of the biggest uninterruptible power supply manufacturers, provides 6KVA to 900KVA UPS products that are highest levels of availability, reliability and efficiency. SCU UPS products cover applications from IT rooms to large data centers and industrial plant and so on. What is the advantage of online UPS over offline UPS？ Wide power range & Support lithium & Lead acid battery Launched the modular UPS in 2003, SCU uninterruptible power supply company launched 15KVA, 30KVA,50KVA, 75KVA UPS modular type and 30-900KVA UPS system in succession with more reliable function and higher power density. SCU, a UPS supplier, developed lithium-ion UPS which is applied for battery energy storage system, supporting lithium-ion battery and lead acid battery. Professional R&D team creats reliable product SCU UPS wholesale has a technical team with more than 30 years of R&D experience and strict quality management system. Each production process of the industrial UPS systems is strictly controlled to realize industrialization, standardization, specialization and modularization of production. Customized and flexible solution SCU UPS manufacturer can make customized solutions for all kinds of special applications, such as customized uninterruptible power supply products and UPS electrical devices based on standardization. SCU produced rack-mounted UPS power supply can meet different functional requirements of customers, improve response speed, ensure safety and reliability, and maximize benefits. Our UPS products application fields cover communication, transportation, manufacturing, petroleum and petrochemical industries throughout more than 50 countries and regions in the world. What is the difference between UPS and inverter? Inverter is a current conversion device, which can converts DC to AC. It needs to be used along with DC power source. You can find it in car, works like a car-mounted power source, converts DC to AC, charge your electronics, mobile phone, computer etc. While industrial uninterruptible power supply can work like a back-up power source, which converts utility power from AC to DC and provides DC current to battery for storage. When utility power fails, power stored in the battery will be discharged to supply the equipment. The uninterruptible power supply guards your equipment, and gives you protection for power failure. What does an uninterruptible power supply do? UPS(Uninterruptible Power Supply) provides clean, stable and the uninterruptible power supply to load equipment. Normally UPS converts AC power from Utility to DC for charging the connected battery. When the utility power fails, UPS electrical device works like backup power, and UPS will switch to battery mode, inverts DC to AC power and continue to run the equipment. During the battery back up time, the modular ups system gives you time to save data from computer or in data center, if your UPS is connected with enough big battery, it can keep running until the main power is back. SCU online UPS double conversion modular UPS, guarantees your equipment continuous power, solves your power problems such as black-outs, power drops and voltage surge, provides you convenience for maintenance. How long does uninterrupted power supply last? UPS power supply depends on the load power (kW) and battery capacity (kWH) equipped with UPS. SCU UPS system manufacturer can offer solution for back up time from minutes to hours. Please contact us for details: enquiry@scupower.com

HPC charger（high power charging station）is a new and innovative solution to the growing demand for fast high current charging of next-generation electric vehicles(E-Bus and Luxury EVs). HPC Ultra-Fast High Power Charging Station 350kW EVHS-350, High Power EV Charging Station is a new and innovative solution to the growing demand for fast high current charging of next-generation electric vehicles(E-Bus and Luxury EVs). EVHS-350 system adopts modular structure design and the most advanced ultra-fast high power charging technology. This kind of high power ev charger consists of one power unit and 2 charge posts. It’s a high power charger that can charge any CCS Compatible eBus or eVehicles with 350kw, 500A max. Compatible car brands BMW, Volkswagen, GM, Porsche, Audi, Peugeot, Citroen, Kia, Renault, Daimler, Mercedes, Jaguar High Power Charging Station Features HPC charger supports CCS connector up to 500A liquid-cooled cables. It is a reliable, robust modular hardware. This fast charging EV station is simple, quick and easy to install. Daylight readable touch screen display RFID authorization. High Power Charger Application Public operations such as highway rest stops, petrol stations, airport etc. Private operations such as EV dealers, EV fleets etc. High Power Charging Station Specifications AC Input for the DC Output Power connection 3P + N + PE Voltage range 400 Vac ± 20 % Frequency 50 Hz or 60 Hz Overall efficiency 95% DC Output Voltage 150Vdc to 1000Vdc Max Current 500A Nominal Power 350kW others DC-Interface CCS 2 RFID system ISO/IEC14443A/B, Mifare;  Optional: FeliCa™ 1, NFC reader mode, ISO/IEC15693, Calypso, Legic Network connection  Standard configuration: LAN Interface; Support 2G/3G/4G/Wi-Fi modem Communication Protocols OCPP 1.6J Operating temperature  -35ºC-60ºC ( -20ºC to -30ºC, heating required) Storage Temperature  -40 ºC to +70 ºC Operating humidity ≤95% non-condensing Protection degree IP54 , IK10 As one of solar energy battery storage companies, we will do our best to meet all the needs of customers.