Automotive, Vehicles & Transportation

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Kingclima330E air conditioner For 10-12M Bus Cooling Capacity: 33kw / 11000BTU Apply: 12m electric buses Voltage: DC400-750V Brief Introduction KingClima330E All-Electric Bus hvac visit https://www.busclima.com or contact busclima@kingclima.com Kingclima330E model is electric air conditioner for all kind of E-Vehicles, rooftop mounted, equipped with all electric scroll compressors, make the cooling efficient best, suit for 10-12m electric buses&coaches. Optional heating systems, DC400-750V voltage, R407C refrigerant, 5 condenser fans and 6 evaporator blowers. Features Features of KingClima330E Electric Bus Air Conditioning System Kingclima330E is 33kw cooling capacity, designed for 10-12m electric buses. Efficient: with DC variable-frequency compressor and brushless fans, the efficiency is improved a lot. Reliable: all components is reaching passenger car level, waterproof IP rating is IP67 level. Protection devices: high pressure and low pressure protection devices, short circuit protection device, phase loss protection device, multiple insulation protection device and have the E-MARK certifications. Advanced: Stable heating under - 20℃ through low temperature heat pump. Intelligent: with advanced PI variable-frequency control, stepless regulation according to the temperature inside and outside, to save 15% energy; Ultralight: we reduced the length and weight, which make the whole electric bus ac units more good appearance and power saving. Quiet: with DC brushless fan and soundproof materials, noise level reduced more than 2dB. Model Kingclima330E Cooling Capacity 27500Kcal/h / 33kw / 11000BTU Heating Capacity 26,000 Kcal/h /30kw / 102000BTU Input Voltage Range(Main power line) DC400V~DC750V Input Voltage Range (Control system) DC-24V 5A Fresh Air 1250 m3/h Refrigerant R407c/6KG Model Electric Variable - Frequency Compressor Displacement 34cc Oil Type HAF68 Type Hydrophilic aluminum foil with internal ridge copper tube Air Flow 6,600 m3/h Blower Type 7-speed centrifugal type EBM Brushless Blower No. of Blower 6 pcs Type Copper Pipe and Aluminum foil Air Flow 10000 m3/h Fan Type Axial type Brushless Fan No. of Fan 5 pcs Control sytem CAN control system with 7 speed air flow adjustment module Expansion Valve Electronic expansion valve Danfoss ETS6-18 Weight 304KG (Standard) or 272KG (Lightweight) Dimension (L*W*H) mm 3000×1920×270 mm Application 12.0 meter Full Electric Bus ,Trolley bus, Tram ,New Energy bus and meter Hybrid Bus visit https://www.busclima.com or contact busclima@kingclima.com

Minimum Order: 1 bags

Our Automotive Interior range includes • Seating Systems: From driver and passenger seats to rear - row seating arrangements, available in a variety of styles and configurations.​ • Dashboard and Instrument Panels: Designed to provide clear visibility and easy operation of vehicle controls.​ • Door Panels: Combining functionality with aesthetic appeal, offering storage compartments and a comfortable armrest area.​ • Center Consoles: Optimizing the space between the driver and passenger, providing storage and organization solutions.​ • Trim and Molding: Adding the finishing touches to the vehicle's interior, available in different materials and designs to complement the overall look.​ • Commitment to Sustainability • Intelligent Functionality & Seamless Integration • Superior Materials and Craftsmanship • Enhanced Safety & Protection • Aesthetic Sophistication & Customization • Uncompromising Quality & Durability • Superior Comfort & Ergonomics

An Automobile Sunroof Assembly Line is a complete production system designed to assemble, test, and deliver high-quality sunroof modules efficiently. Designed for Excellence, Engineered for Scalability Our fully integrated assembly lines automate every critical stage of sunroof installation: Core System Capabilities 1. Precision Component Handling Robotic pick-and-place with vision-guided alignment (±0.1mm accuracy). Automated adhesive dispensing with real-time volume monitoring. 2. Seamless Frame Integration Servo-driven pressing stations with force-torque feedback. Leak-testing modules (air/water) with AI-powered defect detection. 3. Final Assembly & Calibration Motor/actuator installation with automated torque verification. Dynamic function testing (opening/closing cycles, load simulation). 4. Smart Production Intelligence Enabled dashboards for OEE tracking and predictive maintenance. Traceability systems (QR/RFID) for full component lifecycle data.

We are a professional car auto light export sales company with a deep focus on bridging the gap between high - quality automotive lighting products and global markets. With years of dedicated experience in international trade, we have built a strong network that connects reputable manufacturers with customers across the world. Our core mission is to provide reliable, efficient, and tailored export solutions for a wide range of car auto lights, ensuring that every shipment meets the specific demands of different regions and clients. Product Range for Export •  Headlights •  Tail Lights •  Fog Lights •  Signal Lights

A headlamp installation fixture is a sophisticated, vehicle-specific "third hand" that transforms a complex, error-prone task into a precise, repeatable, and efficient process, crucial for both vehicle aesthetics and safety-critical lighting performance. To precisely position, temporarily secure, and align a vehicle's headlamp assembly during installation onto the car body, ensuring perfect fitment, beam alignment starting point, and compliance with safety regulations. Automotive headlamp design merges optics, materials science, and Industry 4.0 manufacturing. Key advancements include adaptive LED systems, integrated thermal management, and automated precision processes. Future development will focus on V2X communication-enabled lighting and sustainable materials, reinforcing headlamps as critical safety and branding elements. ⦁ Optical Accuracy ⦁ Thermal Bonding Integrity ⦁ Sealing Perfection ⦁ Scalability & Flexibility ⦁ Ensures Precise Component Alignment ⦁ Improves Production Efficiency