Batteries

Fuse cutouts, also called cutout switch, are used in primary overhead feeder lines and taps to safeguard distribution transformers against overloads and current surges. They function as a combination of a fuse and a switch. The transformer will be disconnected from the line when the fuse melts due to an overcurrent brought on by a defect in the transformer or customer circuit. Utility linemen standing on the ground and using a long insulating stick known as a "hot stick" can manually open it as well. Applications of Fuse Cutout Overcurrent Protection in Distribution Lines Electric fence cut out switch are strategically installed on overhead distribution lines to protect against overcurrent conditions. When the current exceeds a predetermined level due to faults or overloads, the fuse element in the cutout melts, interrupting the circuit and preventing damage to downstream equipment. Transformer Protection Electric fence shut off switch are commonly employed to safeguard distribution transformers. They provide a protective barrier against excessive currents, disconnecting the transformer in the event of a fault and preventing damage to the equipment. Feeder Line Protection Installed on feeder lines, Fuse Cutouts contribute to the protection of the electrical distribution system by isolating specific sections during faults. This sectionalizing capability minimizes the impact of faults on the entire distribution network. Switchgear Protection Fuse Cutouts are integrated into switchgear systems to enhance protection against overloads and short circuits. Their inclusion in switchgear configurations ensures the safe and reliable operation of electrical distribution equipment. Fault Isolation and Network Reliability Fuse Cutouts play a crucial role in fault isolation, helping maintain network reliability. By isolating faulty sections, they prevent the spread of faults and enable the rest of the distribution system to continue operating. Cost-Effective Fault Interruption Fuse Cutouts offer a cost-effective solution for interrupting circuits during overcurrent conditions. The sacrificial fuse element is designed for easy replacement, providing an efficient and economical means of protecting the distribution system. For more information about power line fittings, please feel free to contact us!

Minimum Order: 1000

Model Number: UFX18650-3S Place of Origin: Guangdong, China Weight: 143g Capacity: 2600mAh Nominal Voltage: 11.1V Charging voltage: 12.6V Dimension: 18*54*67mm Cycle Life: Typically 500 to 800 cycles

Minimum Order: 5 dozens

Model Number: UFX502035 Battery Size: 5*20*37mm Weight: 5g Capacity: 200mAh Nominal Voltage: 3.2V Cycle Life: Typically 500 to 800 cycles

Minimum Order: 5 dozens

Brand Name: UFX Model Number: 702025 Battery Size: 7*20*27mm Weight: 7.5g Capacity: 300mAh Nominal Voltage: 3.7V Charging voltage: 4.2V Discharging Temperature: -20°C to 60°C Storage Temperature: 0°C to 45°C Cycle Life: Typically 500 to 800 cycles

Minimum Order: 5 dozens

Brand Name: UFX Model Number: 103040 Battery Size: 10*30*42mm Weight: Typically 21.8g Capacity: 1200mAh Nominal Voltage: 3.7V Charging voltage: 4.2V Charging Temperature: 0℃ to 45℃ Discharging Temperature: -20℃ to 60℃ Cycle Life: Typically 500 to 800 cycles

Minimum Order: 5 dozens

- Ufine is a collection of R&D, design, production, sales for the integration of high-tech industry company. Since 2015, UFINE has designed and produced more than 1000 specs of battery, including Lithium ion battery lithium iron phosphate battery, ultra thin special-shaped lithium battery, low temperature resistance lithium ion battery. At present, we have more than 200 production personnel, over 30 R&D experts, and a sales team with over 35 professionals. - World-leading Lithium Polymer Battery Manufacturer And Supplier！ UfineBattery has specialized in the R&D and production of lithium polymer batteries, lithium iron phosphate batteries, ultra-thin batteries, battery packs, and low-temperature batteries for 15 years. China's professional lithium polymer battery manufacturers and suppliers！

Minimum Order: 5 dozens

The low temperature performance of the Kete battery is excellent. The operating temperature ranges from -40 to 70 degrees, and the capacity can still be kept at about 40% at low temperature -40 degrees. The performance of Kurt battery in the normal work in cold areas is not comparable to other batteries. Name: Silicon salt sealed storage battery Model: KT-2-200 Dimensions: 175*110*360（±5mm） Voltage: 2V Capacity: 200Ah Tel: 0086 -13724197066 The low temperature performance of the Kete battery is excellent. The operating temperature ranges from -40 to 70 degrees, and the capacity can still be kept at about 40% at low temperature -40 degrees. The performance of Kurt battery in the normal work in cold areas is not comparable to other batteries. The Kete Silicon salt sealed storage battery of our company has its own national patent. It has been widely praised and praised in various fields, such as high cold area, communication, transportation, electricity, wind, solar energy storage and so on.

Detail & Features of 2V 100Ah Lead Acid Battery Name: 2V 100Ah Lead Acid Battery Model: KT-2-100 Dimensions: 170*73*210（±5mm） Voltage: 2V Capacity: 100Ah Life time(year):10 years. Excellent low temperature performance: the operating temperature range is -40 to 70 degrees, and the capacity can still be maintained at about 40% at a low temperature of -40 degrees. Absorbent Glass Mat (AGM) technology for superior performance. 2V 100Ah High capacity range and long service life VRLA batteries. High-rate discharge characteristics ensure reliable performance in UPS and telecom applications. Weight: 6kg Tel: 0086 -13724197066 2V 100Ah Lead Acid Battery KT-2-100 is part of our 2V series of long life & low temperature resistance sealed lead acid batteries (commonly referred to as VRLA). This 2V 100Ah battery is designed for critical applications with long life and low temperature resistance requirements. Known for reliable performance in a variety of scenarios including utility control, telecommunications and uninterruptible power supplies, this battery provides long-lasting and reliable energy support for a variety of applications.

Quiek Information about 12V 150Ah Front Terminal Battery Name: 12V 150Ah Front Terminal Sealed Lead Acid Battery Model: KT-12-150 Dimensions: 552*110*290（±5mm） Voltage: 12V Capacity: 150Ah Container Material: ABS Tel: 0086 -13724197066 Category: vrla 12v battery, Front Terminal Batteries Features 1. ABS battery case made by LG raw material to increase battery service life. 2. Better resistance to permeation: Silica gel electrolyte can reduce the loss and evaporation of electrolyte, improving the stability and durability of the battery. 3. More than 10 years design life. 4. No memory effect. 5. Battery can be installed in any position. Easy instalation and handling. 6. Wide operating temperature range: Operating temperature ranges from -40 to 70 degrees. 7. Low temperature resistance: The capacity can still be kept at about 40% at low temperature -40 degrees.

Kete 12V 150Ah sealed lead-acid battery uses Silica Gel and has excellent low- temperature performance. The operating temperature range is -40 degrees to 70 degrees. The capacity can still be maintained at about 40% at a low temperature of -40 degrees. The performance of Kete batteries in working properly in cold areas is unmatched by other batteries. Detail Name: Lead-acid Battery 12v 150Ah Deep Cycle Sealed AGM Battery Model: KT-12-150 Dimensions: 485*1 , 70*240（±5mm） Voltage: 12V Capacity: 1 , 50Ah Operating Temperature Range: The operating temperature ranges from -40 to 70 degrees. Ideal for rugged & harsh environments.  Capacity Affected By Temperature: The capacity can still be kept at about 40% at low temperature -40 degrees. Certification: IEC, CE. Features< , br>Lead-acid Battery 12v 150Ah with Silica Gel Technology has excellent performance: Better resistance to permeation: Silica gel can reduce the loss and evaporation of electrolyte, improving the stability and durability of the battery. Higher cycle life: Sealed lead acid battery 12v 150ah Uses silica gel can reduce the self-discharge rate of the battery, extending the life of the battery, allowing it to withstand more charge and discharge cycles. The service life is up to 5-10 years, ensuring long-term continuous use. Cold-Resistant: Functions optimally at temperatures as low as -40 degrees Celsius, making it suitable for various environments. Maintenance-Free: Requires minimal to no maintenance, reducing hassle and operational costs. Strong Power Restoration: Exhibits robust power recovery capabilities after discharges or power interruptions. Extended Storage Capacity: Maintains charge effectively during extended periods of non-use, ensuring readiness when needed.

Detail of 12V 100Ah Sealed Lead Acid – AGM – VRLA Battery Name: 12V 100Ah Sealed Lead Acid – AGM – VRLA Battery Model: KT-12-100 Dimensions: 330*173*212（±5mm） Voltage: 12V Capacity: 100Ah Color:Grey black custom colors Payment:T/T Lead Time:30DAYS Features Kete is a company specializing in the production of sealed lead-acid batteries, and our 12V 100Ah sealed lead-acid battery uses silicone electrolyte, has a higher cycle life of 5-10 years, a higher operating temperature range, the operating temperature range is -40 degrees to 70 degrees, and the capacity can still be maintained at low temperatures of -40 degrees Keep it around 40%. And it is maintenance-free, reducing the user's operation and maintenance costs. While batteries with silicone electrolytes may be slightly more expensive, their performance and lifespan may exceed that of traditional sealed lead-acid batteries.

12V 90AH Lead Acid Gel Battery Detail Name：12V 90AH Lead Acid Gel Battery Model：KT-12-90 Dimensions：305*17 , 0*215（±5mm） Voltage：12V Capacity：90 , Ah Tel: 0086 -13724197066 Features The low temperature performance of the 12V 90AH Lead Acid Gel Battery is excellent. The operating temperature ranges from -40 to 70 degrees,and the capacity can still be kept at about 40% at low temperature -40 degrees. The performance of Kurt battery in the normal work in cold areas is not comparable to other batteries. The battery of our company has its own national patent.It has been widely praised and praised in various fields, such as high cold area,communication,transportation, electricity,wind, solar energy storage and so on. https://www.ketebattery.com/

Mini Electric Pickup Truck Product Description A mini electric pickup truck is a small-sized truck powered by an electric motor, utilizing battery technology for propulsion instead of traditional internal combustion engines. These vehicles are designed to offer the versatility and utility of a pickup truck while providing the benefits of electric propulsion, such as reduced emissions and lower operating costs. Length * Width * Height (mm) L:3488*W:1470*H:1634 Interior dimension of cargo compartment (mm) L:1410*W:1250*H:440 Wheelbase (mm) 2358 Front/Rear track width (mm) 1205/1211 Curb weight (kg) 774 Maximum total mass (kg) 1424 Loading weight 600 Maximum speed (km / h) 72 Minimum ground clearance (mm) 179 Approach angle/Departure angle 47.2°/26.6° Mileage (km) (NEDC) 185 Maximum climbing gradient (%) 20 Power battery type Lithium iron phosphate Power battery capacity 96V 100Ah

Lithium Motorcycle Battery Product Description Lithium motorcycle battery also have some considerations, including higher initial cost compared to lead-acid batteries and sensitivity to overcharging or deep discharge, which can affect their longevity and safety. Size L:112mm*W:69mm*H:84mm±1mm   Nominal capacity 3Ah   Nominal voltage 12.8V   Weight 700g±10g   Maximum charging voltage 15.6V 0℃≤T≤55℃ Minimum discharge voltage 10V 0℃＜T≤60℃ 8V -20℃≤T≤0℃ Input Charging Current 1A   Standard Output Discharging Current 1.5A / Rated power 38.4W   Cycle Life ≥1200 0.5C/0.5C,80%DOD@25℃ Max.charge current 1.5A   Maximum continuous discharge current 3A   Maximum instantaneous discharge current(2S) 90A