 |
Post an Offer to Sell New here? Please subscribe to post trade leads. It's FREE! |
Electronics & Electrical
Home > Offers to Sell > Electronics & Electrical
| Summary of 2/10/26 23:06 GMT: | >> Show Compact View |
)
Spiral Vibration Damper reduces Vibration (the high frequency, low amplitude vibration caused by horizontal wind passing across the line. It is designed to be used on OPGW and conductors with an outside diameter less than 0.75". Spiral Vibration Damper Spiral vibration dampers are motion-control products designed to eliminate wind vibration that can occur across a cable span. Made of weather and corrosion resistant plastic, these transmission line vibration dampers have large spiral shaped vibration dampening sections that fit the size of the cable. A smaller clamping section gently grips the conductor. Using the recommended number of spiral dampers minimizes bending strain and protects the cable from long-term fatigue caused by breeze vibration.
Phone:
Fax:
Email:
NO.189, Hengshan Street,
Shijiazhuang
China
)
They are similar to a drop wire clamp. This mechanical device is a single-tension piece of hardware used to fasten overhead transmission and distribution wires and cables to a pole, building, etc. Steel Cable Clamps will compress those wires and cables to become horizontally straight. Or at least straight enough that the wire won’t stoop too low. Cable Tension Clamps are also used to support the cable’s weight, keeping tension on the line while relieving stress on the attachment points.
Phone:
Fax:
Email:
NO.189, Hengshan Street,
Shijiazhuang
China
)
ADSS hardware are used to secure ADSS cables to utility poles. The integration test between the fitting and the cable is approved according to the "NESC Heavy Duty" standard. The correct ADSS hardware are determined by the outside diameter of the cable and the length of the span to be covered. What is an ADSS cable? ADSS (All Dielectric Self-Supporting) cables are ideal for installation in power distribution and transmission environments, even when a live installation is required. As the name implies, no supports or slings are required, so a single installation is all that is needed, making ADSS an economical and simple way to.
Phone:
Fax:
Email:
NO.189, Hengshan Street,
Shijiazhuang
China
)
DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Downlead Clamp Downlead clamp is used to guide fiber optic ground wire (OPGW) from the top of the structure to the junction box.Huaneng's lead-off clips are easy to install, provide proper spacing and maintain strength without damaging the cable. From poles to towers, Huaneng offers a full line of downlead clamp for OPGW to meet the needs of any application.
Phone:
Fax:
Email:
NO.189, Hengshan Street,
Shijiazhuang
China
)
ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters.
Phone:
Fax:
Email:
NO.189, Hengshan Street,
Shijiazhuang
China
)
OPGW joint boxs, also known as splitter boxes, are designed to accommodate core connectors to the outdoor intermediate fiber optic cable leading to the control room patch panel. Fiber core connectors are used to connect backbone fiber optic cables (such as OPGW) OPGW Joint Box The OPGW joint box is used to store the fiber core splices leading to the control room patch panel.The OPGW junction box is a key component in the installation and maintenance of OPGW cables, and is used to place, protect, and organize the splices or splices of the fibers within the OPGW cable.
Phone:
Fax:
Email:
NO.189, Hengshan Street,
Shijiazhuang
China
)
The LHT-840CN full-color night vision camera is the perfect choice for all- weather HD surveillance! Whether in extreme low light or total darkness, it breaks through the limitations of darkness, delivering clear and vivid color images. It makes nighttime surveillance more intuitive and accurate, allowing for easy target identification even in the dark. It provides clear and reliable surveillance for various scenarios, including security and outdoor monitoring, ensuring safety and clarity in every corner. Technical Parameters: Image Sensor 1/1.8”CMOS Effective Pixels 2688*1520 Pixel size 2.9um*2.9um Video output MJPG/YUY2 Maximum Frame Rates(MJPG Resolution and frame rate) MJPG 2688*1520/30fps Maximum Frame Rates(YUY2 Resolution and frame rate) YUY2 1920*1080/5fps Dynamic range ≥100dB Min.Illumination 0.001Lux Digital interface 5pin 1.0mm USB2.0 Power requirements 5V±0.5 Power Consumption 1.5W±0.2
Phone:
Fax:
Email:
5th Floor, Building B, Tangxi Second Industrial Zone, Gushu Community, Xixiang Street, Bao'an Distri
Shenzhen 518100
China
)
The LHT-FP60849 fingerprint recognition module is a self-developed, high- performance verification device equipped with a semiconductor fingerprint sensor that can capture fingerprints in all finger positions. It also features a dedicated algorithm and comes in a modular form factor. The entire device has passed security testing and certification, supports secondary development, and can be embedded into user products. Camera Modules Parameters: Appearance Size Dimensions (LengthWidthHeight) 53 × 38×6 (unit: mm) Power Consumption DC 3.3V ===135mA Communication Interface UART Sensor Type Semiconductor (Area/Pressure Type) Effective Image Area 19.9 mm x 14.35 mm Fingerprint Image Resolution 256*360 Image Resolution 508 DPI Basic Function Fingerprint Collection/Authentication Image Gray Level 8-bit, 256 levels Dynamic Range of Gray Level ≥220 Image Background Unevenness ≤10% Algorithm Collection Collection Time <0.25s Matching Mode 1:1 or 1:N Relative Speed 0.06s
Phone:
Fax:
Email:
5th Floor, Building B, Tangxi Second Industrial Zone, Gushu Community, Xixiang Street, Bao'an Distri
Shenzhen 518100
China
)
The MIPI Camera Modules series miniature camera, equipped with PrimeSensor CMOS and Taiwan's latest DSP technology, delivers high-quality images. Its compact, 70*12mm body boasts a sturdy construction and exceptional stability. Its excellent low-light performance, combined with automatic white balance and automatic autofocus (AE) adjustment, allows for flexible adaptation to diverse environments. Built-in lightning protection ensures safety and reliability. This makes it widely applicable across various industries, including finance and government affairs, and suitable for various self-service devices and facial recognition applications. It is an ideal choice for efficient, adaptable, and high-performance miniature cameras. Signal RGB+IR MIPI Scanning Frequency (V) 50HZ 50HZ Image Sensor 1/2.5 ”CMOS 1/5 ”CMOS(CustomizeGC5035) Effective Pixels 2592*1944 2592*1944 Video output MJPG/YUY2 RGB/RAW Maximum Frame Rates RGB+IR 2592*1944/30fps MIPI 2592*1944 Maximum Frame R , ates RGB+IR 2592*1944/2fps Dynamic range 85dB 64.7DB Digital interface 30Pin 0.5MM H :1.5MM Flip Connector Power requirements 5V+-0.5 AVDD:2.8V IOVDD :1.8V DVDD:1.2V Power Consu , mption 2W <1W Dimensions(mm) 70mmx12mm
Phone:
Fax:
Email:
5th Floor, Building B, Tangxi Second Industrial Zone, Gushu Community, Xixiang Street, Bao'an Distri
Shenzhen 518100
China
)
The LHT-CC3MU trinocular camera module features dual 3MP + 2MP sensors, supports automatic infrared fill light, autofocus, automatic gain control/white balance, liveness detection, and facial recognition with software. Power consumption is as low as 1W, and it supports Windows, Android, and Linux systems. It's plug-and-play, requiring no drivers, for convenient and fast operation. This product features dual 1/3" CMOS + 1/5" CMOS sensors, supports MJPG/YUY2 formats, and has a standard size of 70*12*7mm. Customizable lens angles and dimensions are available, and the normal light facial recognition range is 30- 120cm. A 3-meter, 5-pin, 1.25mm USB 2.0 cable is included. It is suitable for a variety of scenarios, including security surveillance, industrial inspection, and smart devices, providing clear and stable images for visual applications. Dual Lens Camera Modules Technical Parameters: Pixel size 2.2um*2.2um 2.2um*2.2um Video output MJPG/YUY2 MJPG/YUY2 MJPG/YUY2 Maximum Frame Rates (MJPG Resolution and Frame Rate） Black and White 2048*1536 Color 2048*1536 1600*1200 Maximum Frame Rates (YUY2 Resolution and Frame Rate） Black and White 2048*1536 Color 2048*1536 1600*1200 Dynamic range 69.5dB 69.5dB Min.Illumination 1LUTX 1LUTX 1LUTX Digital interface 5-pin 1.25mm USB2.0 5-pin 1.25mm USB2.0 MIPI Power requirements 5V+-0.5 5V+-0.5 5V+-0.5 Power Consumption 1W 1W 1W
Phone:
Fax:
Email:
5th Floor, Building B, Tangxi Second Industrial Zone, Gushu Community, Xixiang Street, Bao'an Distri
Shenzhen 518100
China
)
The LHT-HDO5B 5-megapixel HDR monocular wide-angle recording and video camera module features a 1/2.5" CMOS image sensor and supports recording and video at resolutions up to 2592 x 1944 pixels at 30 fps. Its high frame rate and high dynamic range ensure smooth and clear video. The LHT-HDO5B camera module offers HDR and low-light performance, a built-in microphone, and a voice pickup range of up to 3 meters. This UVC-compliant, plug-and-play camera module is compatible with Windows, Linux, and Android operating systems and is suitable for machine vision, industrial inspection, video conferencing, and other applications. Technical Parameters: Image Sensor 1/2.5 ”CMOS Effective Pixels 2592*1944 Pixel size 2.2umx2.2um Video output MJPG YUY2 Maximum Frame Rates(MJPG Resolution and Frame Rate) 2592*1944/25fps Maximum Frame Rates(YUY2 Resolution and Frame Rate) 2592*1944/5fps Dynamic range ≤100dB Digital interface 5-pin 1.25mm USB2.0 Power requirements 5V+-0.5 Power Consumption 2W Dimensions mm 35.5mmx30mm Operatingtemperature(℃) -15~60℃
Phone:
Fax:
Email:
5th Floor, Building B, Tangxi Second Industrial Zone, Gushu Community, Xixiang Street, Bao'an Distri
Shenzhen 518100
China
)
Playground Cable Ties/In-Line Cable Ties Materials: Nylon 66 94V-2 certificated by UL. Heat-resisting, erosion control, insulate well and not apt to age. Colors:Natural, UV black and other colors are available as requested. Operating temperature: -35 to 85 Features: Fixed and flexible two-wedge locking design provides a low threading force, Teeth on both sides of cable tie body provide additional locking strength and improved flexibility to conform to irregular bundle shapes such as securing cables to cable tray systems, Releasable head position for temporary bundling of cables prior to final locking; no need to replace ties when adding cables/wires to the bundle Packing:100PCS/BAG,50PCS/BAG HS Code:39269090 MOQ:3000 bags Payment Term: T/T Delivery Term: FOB Shanghai Delivery Date: in 15 days
Minimum Order: 3000
Phone:
Fax:
Email:
13247193001
Unit 1, 22th Building, Mocha Town, Panlong Cheng Dist
WUHAN 430300
China
)
Releasable Cable Ties Material: UL Nylon 66,94 V-2 certificated,Heat-resisting, Anti-corrosion, Anti- aging,Good Insulation Features:Releasable and reusable cable tie, Simple and effective release mechanism,Can be opened quickly and easily with one hand, Inside serrated cable tie Color: Natural, UV black and other colors are available as requested. Applications: Ideal for use in applications where there is the need to repeatedly open and close the tie. Packing:100PCS/BAG,50PCS/BAG MOQ:3000 bags Payment Term: T/T Delivery Term: FOB Shanghai Delivery Date: in 15 days
Minimum Order: 3000
Phone:
Fax:
Email:
13247193001
Unit 1, 22th Building, Mocha Town, Panlong Cheng Dist
WUHAN 430300
China
)
Cable Tie Mounting Bases Material: Nylon 66 Sizes:Contact us to get it Color: Nature Color, Black, Grey and others available Specs: 4 way can be used as a 2 way,Screw and adhesive mounting bases. Applications:Order cable ties separately,Popular method to secure wires, hoses, cables, etc. Packing: 100PCS/BAG,50PCS/BAG MOQ:3000 bags Payment Term: T/T Delivery Term: FOB Shanghai Delivery Date: in 15 days
Minimum Order: 3000
Phone:
Fax:
Email:
13247193001
Unit 1, 22th Building, Mocha Town, Panlong Cheng Dist
WUHAN 430300
China
)
Self-Locking Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes:Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm:40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm:120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature:Strength,94 v-2 fireproof,acid proof, corrosion resistant, good insulation,not easy ageing.Bundle wires quickly and soft,good toughness,self- locking fastening,easy to use. Color: White and black; (other color available upon request). Certification:UL,SGS,Rohs,Reach,CE,IS , O Packing: 100pcs/bag HS Code:39269090 MOQ:3000 bags Payment Term: T/T Delivery Term: FOB Shanghai Delivery Date: in 15 days
Minimum Order: 3000
Phone:
Fax:
Email:
13247193001
Unit 1, 22th Building, Mocha Town, Panlong Cheng Dist
WUHAN 430300
China
SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
| Post an Offer to Sell |
| HomeOffers to BuyBusiness OpportunitiesCompany Profiles |
© 1996-2026 IMEXBB.com. All rights reserved.
 |
|