Electronics & Electrical

An insulating device made of glass called a glass powerline insulators is used to support and shield wires. Glass insulators are more insulating and more resistant to aging than traditional ceramic insulators. The premium glass used in our company's glass utility pole insulators is given exceptional strength and impact resistance through a special manufacturing process. Harsh environmental factors like humidity, pollution, and extreme temperatures can't harm this kind of insulator. Types of Types of glass insulators Standard glass power line insulators for sale, Anti-Fog/Anti-Pollution glass insulator, Aerodynamic glass insulator all could be supplied in our company, if you have any demand for the Anti-fog/Anti-Pollution toughened glass insulator, please contact us freely. There are many glass insulator factory, but we are one of the best choices for you. For more information about power line fittings, please feel free to contact us!

Minimum Order: 1000

Fuse cutouts, also called cutout switch, are used in primary overhead feeder lines and taps to safeguard distribution transformers against overloads and current surges. They function as a combination of a fuse and a switch. The transformer will be disconnected from the line when the fuse melts due to an overcurrent brought on by a defect in the transformer or customer circuit. Utility linemen standing on the ground and using a long insulating stick known as a "hot stick" can manually open it as well. Applications of Fuse Cutout Overcurrent Protection in Distribution Lines Electric fence cut out switch are strategically installed on overhead distribution lines to protect against overcurrent conditions. When the current exceeds a predetermined level due to faults or overloads, the fuse element in the cutout melts, interrupting the circuit and preventing damage to downstream equipment. Transformer Protection Electric fence shut off switch are commonly employed to safeguard distribution transformers. They provide a protective barrier against excessive currents, disconnecting the transformer in the event of a fault and preventing damage to the equipment. Feeder Line Protection Installed on feeder lines, Fuse Cutouts contribute to the protection of the electrical distribution system by isolating specific sections during faults. This sectionalizing capability minimizes the impact of faults on the entire distribution network. Switchgear Protection Fuse Cutouts are integrated into switchgear systems to enhance protection against overloads and short circuits. Their inclusion in switchgear configurations ensures the safe and reliable operation of electrical distribution equipment. Fault Isolation and Network Reliability Fuse Cutouts play a crucial role in fault isolation, helping maintain network reliability. By isolating faulty sections, they prevent the spread of faults and enable the rest of the distribution system to continue operating. Cost-Effective Fault Interruption Fuse Cutouts offer a cost-effective solution for interrupting circuits during overcurrent conditions. The sacrificial fuse element is designed for easy replacement, providing an efficient and economical means of protecting the distribution system. For more information about power line fittings, please feel free to contact us!

Minimum Order: 1000

Eye nuts are internally threaded fasteners that are frequently used in the lifting and rigging industry to lift and secure cables, wires, and chains. Steel that has been forged, zinc-plated, stainless steel, or hot-dipped galvanized are the materials used to make eye nuts. To suit your application, select the thread dimensions and, if applicable, the working load limit in addition to the structural material. General Information of eye nut for sale Material-Body Steel, Stainless Steel Strength Rating 70KN, 120KN, 180KN Finishing Hot Dip Galvanize Hebei Yongguang Line Equipment Co., Ltd. is a eye nut manufacturers, we provide eye nut fastenal, steel eye nut, galvanised eye nuts, electric power fittings, etc. For more or buy eye nut, please feel free to contact us!

Minimum Order: 1000

bulk eye bolts are specially designed fasteners that are mainly used in situations where tensile forces and heavy loads are required. It is usually installed at the top center or symmetrical position of the part for lifting operations, and can be arranged on both sides of the part in a symmetrical manner. When designing, consider the safe load that can withstand lifting the entire part. Basic Information of Electrical Service eye bolt china Material-Body Steel, Stainless Steel Strength Rating 70KN, 120KN, 180KN,++ Finishing Hot Dip Galvanize We customize products according to client’s specification. Features of Electrical Service stainless steel eye bolts for sale Eye bolts have threads on one end and an eye on the other end. These bolts are used for a variety of hanging and variable tension applications. Eye bolts can be used for permanent fastening in side-to-side applications or in overhead applications to suspend weights. Our eyebolt can be used on low temperature condition. Hebei Yongguang Line Equipment Co., Ltd. is a eye bolt factories, we provide electrical service eye bolt, line equipment, etc. For eye bolt selection or more about eye bolt safe working load, please feel free to contact us!

Minimum Order: 1000

We produce a large variety of high- and low-voltage disc pin insulator that are extremely resistant to lightning punctures and are intended for distribution systems. like PQ-36Y, P-11-Y, P-15-Y, P-20-Y, and P-33-Y. Single- or multi-piece disc and pin insulators are frequently found in inexpensive distribution lines. These insulators are less likely to break because of their multipiece construction, which allows them to withstand line voltage for extended periods of time even when one of their shells breaks. Applications of Pin Insulator 22 kv pin insulator serve a crucial role in electrical distribution systems, providing electrical insulation and mechanical support to conductors in overhead power lines. Their distinctive design, often resembling a cylindrical or barrel shape, features a central spindle that can be attached to a supporting structure, such as a crossarm on a utility pole. The primary applications of Pin Insulators include: Overhead Power Lines Pin Insulators are commonly used in overhead power distribution lines to suspend and insulate conductors. They help maintain a safe and reliable flow of electricity from power generation sources to end-users. Utility Poles and Crossarms These electrical pin insulator are mounted on utility poles and crossarms to support the conductors at specified intervals. The pin-type design allows for easy attachment and secure installation. Substation Equipment Pin Insulators find application in electrical substations, providing insulation for conductors connected to various substation equipment, such as transformers and circuit breakers. Hebei Yongguang Line Equipment Co., Ltd. is a pin insulators suppliers, we provide insulator pins for sale, wire end lugs, line equipment, etc. For 33kv porcelain pin insulator specifications or 22 kv pin insulator price, please feel free to contact us!

Minimum Order: 1000

Cable wire lugs are made to accommodate a variety of wire types, making electrical connections simpler. This enables you to connect thick cables to a connector that may have a smaller diameter. Safer Connection. The purpose of Cable Lug's invention was to guarantee both user and electrician safety. For our customers, we offer every style and size of cable lug. Hebei Yongguang Line Equipment Co., Ltd. is a Cable Wire Lugs company, we provide electrical cable termination lugs, ground wire terminal lugs, stainless steel wire lugs, copper electrical lugs, copper wire aluminum terminal, wire end lugs, insulating fittings, etc. For more information, please feel free to contact us!

Minimum Order: 1000

Model Number: UFX18650-3S Place of Origin: Guangdong, China Weight: 143g Capacity: 2600mAh Nominal Voltage: 11.1V Charging voltage: 12.6V Dimension: 18*54*67mm Cycle Life: Typically 500 to 800 cycles

Minimum Order: 5 dozens

Model Number: UFX502035 Battery Size: 5*20*37mm Weight: 5g Capacity: 200mAh Nominal Voltage: 3.2V Cycle Life: Typically 500 to 800 cycles

Minimum Order: 5 dozens

Brand Name: UFX Model Number: 702025 Battery Size: 7*20*27mm Weight: 7.5g Capacity: 300mAh Nominal Voltage: 3.7V Charging voltage: 4.2V Discharging Temperature: -20°C to 60°C Storage Temperature: 0°C to 45°C Cycle Life: Typically 500 to 800 cycles

Minimum Order: 5 dozens

Unicore high accuracy gps module are based on the NebulasIV GNSS SoC. With all-constellation all-frequency support and designed for use in high- precision applications such as UAV, robots, precision agriculture, surveying, mapping, vehicle navigation, telecom and more, NebulasIV™ offers outstanding RTK and Heading performance at affordable pricing. High Precision GNSS Products Features Driven by a full-constellation and full-frequency RTK engine, Unicore's RTK algorithm takes advantage of triple and quad frequency observables, effectively mitigating ionospheric residuals. RTK can provide real-time centimeter-level glonass precision positioning, which requires real-time base station data. In practical applications, radio or wireless network communication is often interrupted. During the interruption of the base station data, RTK’s positioning accuracy decreases quickly. Unicore’s RTK KEEP technology can maintain the centimeter-level positioning accuracy for more than 10 minutes after the interruption. FAQS High Precision GNSS Products FAQs What is the impact of discontinuous transmission of differential data or excessive delay on RTK solution? The more stable the transmission of differential data is, the greater the help for differential positioning, and the more stable the accuracy will be. If the packet loss is very serious on the transmission link of differential data and the differential age usually exceeds 15, the reliability and accuracy of RTK will decrease. RTK eliminates ionospheric errors, tropospheric errors, satellite orbital errors, and satellite clock bias through the correlation of errors between the base station and rover station, thereby achieving centimeter-level positioning accuracy. If the transmission of the base station data is interrupted, the correlation between the rover station observations and the aforementioned errors in the base station data tens of seconds ago will be weakened, and the longer the time, the weaker the correlation, and then the positioning accuracy will drop fast. Ordinary receivers will not be able to provide RTK service after 20 seconds since the interruption of the differential data transmission. But Unicore's RTK KEEP technology, which uses models and estimation to eliminate the satellite orbital errors, clock bias, ionospheric and tropospheric errors, as well as other factors that affect the positioning results, can maintain centimeter- level accuracy for more than 10 minutes after the transmission of the differential data from the base station is interrupted. This greatly improves the availability of RTK service, especially for applications such as UAVs and forestry operations, where radio or wireless network communications are often interfered or blocked. Signal acquisition process The NebulasIV chip is upgraded on the basis of NebulasII. It can capture and track each frequency independently. For more information about precision gps receiver and accurate gps module, please feel free to contact us! If you are looking for a reliable gnss company, don't hesitate to contact us!

UM220-INS NL Industrial Grade Multi-GNSS Inertial Navigation Module and Positioning Module UM220-INS NL is an industrial grade dead reckoning gnss +MEMS module designed for in-dash vehicle navigation and high-end navigation. Based on Unicore's proprietary low power consumption GNSS SoC - UC6226, and with the built-in 6- axis MEMS, UM220-INS NL can directly output GNSS+MEMS integrated positioning results, It is most suitable for applications requiring high accuracy, high reliability, and high continuity. Product Characteristics Miniaturized All-in-One design Built-in MEMS device, output of integrated navigation and positioning results with one single module 100% positioning continuity even in tunnels or underground parking lots In-dash integrated navigation algorithm, supporting odometer pulse Supports A-GNSS Technical Specifications Performance Specifications Channel 64 channels, based on UFirebird Frequency1 GPS L1 BDS B1 Galileo E1 GLONASS G1 QZSS SBAS Modes Single-System Positioning Multi-System Positioning Time to First Fix (TTFF) Cold Start: <28s Reacquisition: < 1 s Positioning Accuracy (CEP) Horizontal: 2.0 m (Dual-System) < 5% x driving distance (inertial navigation, without GNSS signal) Velocity Accuracy(RMS)2 0.1 m/s (GNSS) 1PPS Support Sensitivity GNSS Tracking          -161 dBm Cold Start       -147 dBm Hot Start         -154 dBm Reacquisition  -157 dBm Update Rate 1 Hz / 5 Hz / 10 Hz Differential Data RTCM V3.X Data Format NMEA-0183, Unicore Physical Specifications Dimensions 12.2 x 16.0 x 2.6 mm Package 24 pin SMD Temperature Operating -40 °C ~ +85 °C Storage -45 °C ~ +90 °C Electrical Specifications Voltage 3.0 V ~ 3.6 VDC LNA Feed 3.0 V ~ 3.3 V Power Consumption3 90 mW Functional Ports 2 x UART (LVTTL) 1 x SPEED  1 x FWD 1 x 1PPS (LVTTL) NOTE:  1 Simultaneously running three systems at most. Using  command to switch between BDS and GLONASS.  2 Typical Value, < 3 0m/s open sky  3 Open sky, continuous tracking. There are many gnss companies, but we are one of the best choices for you.

UM220-IV NL Industrial Grade Multi-gps satellite navigation and Positioning Module Multi-constellation positioning module for the vehicle navigation market. It is based on Unicore's GNSS SoC - UC6226. Featuring high integration, low power consumption, anti-interference design, and A-GNSS support, the UM221-IV NV is suitable for automotive applications that demand high performance, reliability, and quality. Product Characteristics Excellent navigation and positioning performance, supporting single-system standalone positioning and multi-system joint positioning Anti-interference design, which enables the module to work stably under complex electromagnetic environments Low power consumption design Supports NMEA V4.1 protocol Surface Mount Technology which facilitates users to produce Raw observation data output (optional) Technical Specifications Performance Specifications Channel Based on 64-Channel SoC - UFirebird Frequency1 GPS L1 BDS B1 Galileo E1 QZSS Positioning Modes Single-system or multi-system Time to First Fix (TTFF)2 Cold Start < 28 s Hot Start: < 1 s Re-acquisition < 1 s AGNSS < 4 s 1PPS Support Sensitivity GNSS Tracking           -161 dBm Acquisition       -147 dBm Hot Start          -151 dBm Reacquisition   -158 dBm Update Rate 1 Hz Data Format NMEA 0183, Unicore Physical Specifications Dimensions 12.2 x 16.0 x 2.4 mm Weight 0.8 g Package 24 pin SMD Temperature Operating -40 °C ~ +85 °C Storage -45 °C ~ +90 °C Electrical Specifications Voltage 3.0 V ~ 3.6 VDC LNA Feed 3.0 V ~ 3.3V, < 100 mA Power Consumption2 50 mW Functional Ports 2 x UART (LVTTL) 1 x 1PPS (LVTTL) Functional Characteristics AGNSS * Raw observation output NOTE: * Supported by specific firmware 1 Open sky, using TruePoint RTK algorithm 2 Open sky, continuous tracking For more information about gps satellite system and buy gps module, please feel free to contact us!

UM981 GPS/BDS/GLONASS/Galileo/QZSS All-constellation Multi-frequency RTK/INS Integrated Positioning Module Unicore's new-generation proprietary RTK/INS integrated navigation module. The module integrates a high-speed floating-point processor and an RTK-dedicated coprocessor, enabling it to output IMU raw data at 100Hz and RTK data at 50Hz, respectively. The on-board MEMS chip and algorithm ensure continuous, high- quality positioning results in GNSS denied environments such as buildings, tunnels, overpasses, and shaded areas. With its high precision and performance, the UM981 is well-suited for surveying and precision agriculture, among other applications. Features Based on the new generation GNSS SoC - NebulasIV, which integrates RF, baseband, and high precision algorithm All-constellation multi-frequency RTK engine and advanced RTK technology Instant RTK initialization technology 60 dB narrowband interference suppression and interference detection Heading2 technology to provide orientation information STANDALONE single-station high-precision positioning technology Supports B2b-PPP and E6-HAS On-board MEMS integrated navigation and U-Fusion technology to ensure continuous positioning when loss of lock on GNSS signals Technical Specifications Performance Specifications Channel 1408 channels, based on NebulasIV Frequency GPS L1C/A, L1C, L2C, L2P(Y), L5 BDS B1I, B2I, B3I, B1C, B2a, B2b GLONASS G1, G2, G3 Galileo E1, E5a, E5b, E6 QZSS L1C/A, L1C, L2C, L5 NavIC L5 SBAS L1C/A Single Point Positioning(RMS) Horizontal: 1.5m Vertical: 2.5m DGPS (RMS) Horizontal: 0.4m Vertical: 0.8m RTK (RMS) Horizontal: 0.8cm+1ppm Vertical: 1.5cm+1ppm PPP（RMS）  Horizontal: 5cm Vertical: 10 cm Tilt Measurement 10 mm + 0.7 mm/°tilt  (accuracy < 2.5 cm within 30°) Positioning Error of INS only < 5 % of the distance traveled without GNSS signals Observation Accuracy (RMS) BDS GPS GLONASS Galileo B1I/B1C/L1 C/A/G1/E1 Code 10 cm 10 cm 10 cm 10 cm B1I/B1C/L1C/A/G1/E1 Carrier Phase 1 mm 1 mm 1 mm 1 mm B2I/B2a/B2b/L5/E5a/E5b Code 10 cm 10 cm 10 cm 10 cm B2I/L2P(Y)/L2C/G2/E5b Carrier Phase 1 mm 1 mm 1 mm 1 mm B3I/B2a/E5a/L5 Code 10 cm 10 cm 10 cm 10 cm B3I/B2a/E5a/L5 Carrier Phase 1 mm 1 mm 1 mm 1 mm Time Accuracy (RMS) 20 ns Velocity Accuracy (RMS) 0.03 m/s Cold start < 12 s Initialization Time < 5 s (typical) Initialization Reliability > 99.9% Data Update Rate 100 Hz (IMU RAW Data) 50 Hz* (RTK) Differential Data RTCM V3.X Data Format NMEA-0183, Unicore Physical Characteristics Packaging 54 pin LGA Dimension 17.0 × 22.0 × 2.6 mm Weight 1.91 g ± 0.03 g Environmental Specifications Working temperature -40 °C ~ +85 °C Storage Temperature -55 °C ~ +95 °C Humidity 95% No condensation Vibration GJB150.16A-2009, MIL-STD-810F Shock GJB150.18A-2009, MIL-STD-810F Communication Interface 3 x UART (LVTTL) 1 x I2C* 1 x SPI* 1 × CAN* (shared with UART3) Note: Items marked with * are only supported by specific firmware. For more information about unicore communications and anti-jamming, please feel free to contact us!

Industrial Grade Multi-GNSS Navigation and Positioning Module Multi-constellation compact navigation module designed for the automotive market. Based on Unicore's GNSS SoC - UC6226, it boasts high integration, low power consumption, anti-interference design, compact size, and is suitable for cost-effective applications. Product Characteristics Compact design, small size Excellent navigation/positioning performance, supports single system standalone positioning and multi-system joint positioning Anti-jamming design to ensure the module working stably in complex electromagnetic environment Low power consumption Supports A-GNSS and DGNSS Compatible with mainstream 10.1 x 9.7 mm GNSS modules, saving cost of replacement SMD package Technical Specifications Performance Specifications Channel Based on 64-Channel SoC - UFirebird Frequency1 GPS L1 BDS B1 GLONASS G1 Galileo E1 QZSS SBAS Modes Single-System Positioning Multi-System Positioning Time to First Fix (TTFF)2 Cold Start: < 28 s Hot Start < 1 s Reacquisition: < 1 s AGNSS < 4 s Positioning Accuracy(CEP)3 Horizontal: 2.0 m Vertical: 3.0 m Velocity Accuracy(RMS)3 0.1 m/s (GNSS) 1PPS Support Sensitivity GNSS Tracking            -161 dBm Acquisition        -146 dBm Hot Start           -151 dBm Reacquisition    -158 dBm Update Rate 1 Hz Data Format NMEA 0183, Unicore Physical Specifications Dimensions 9.7 x 10.1 x 2.2 mm Package 18 pin SMD Temperature Operating -40 °C ~ +85 °C Storage -45 °C ~ +90 °C Electrical Specifications Voltage 3.0 V ~ 3.6 VDC LNA Feed 3.0 V ~ 3.3V, < 100 mA Power Consumption4 90 mW Functional Ports 1 x UART (LVTTL) 1 x 1PPS (LVTTL) Functional Characteristics Passive Antenna, Active Antenna AGNSS * NOTE: Supported by specific firmware 1 Simultaneously running three systems at most.Using command to switch between BDS and GLONASS. 2 Open sky. 3 Typical value <30m/s open sky. 4 Open sky, continuous tracking. For more information about unicore gnss and gps plus glonass, please feel free to contact us!