Power Supplies & Equipment

Product Name: Wireless 4G Centralized Controller Model No: SS-LED-6CH16A4G1C485WS Product Description: A wireless 4G street light centralized controller developed and produced in accordance with industrial design standards, with 6 built-in loop control, can cooperate with single lamp/dual lamp controller, centralized control of street lights, landscape lights, dimming control, and real-time monitoring of electricity and voltage. Through wired transmission of 220V power supply and control signal at the same time, save wiring costs, simplify installation steps, suitable for large-scale lighting renovation projects. Main Features: 1.Manual, timing control 6 loop switches, brightness adjustment. The power cable can transmit 220V power and control signals at the same time 2.Supports dimming mode, timing mode, illumination mode, holiday mode, single light mode, group control and other control modes 3.Can support 4G or wired network transmission, suitable for various installation environments 4.Built-in system menu, applicable to various application scenarios complex Settings 5.The LCD screen displays the current loop status, and the status of each loop and lamp Main Application: It is suitable for the centralized control of traditional street lights and large-scale landscape lights. By installing a single lamp controller, it can monitor the online, offline and power consumption parameters of each street light, remotely open and close the street light, or realize the automatic dimming control of the street light according to the timing plan, saving manual inspection, maintenance costs, energy saving and emission reduction.

Minimum Order: 1 bags

Sheet Metal And Machined Products ACE sheet metal is characterized by a variety of high-precision large-scale mechanical parts processing and precision parts processing, with a product accuracy of 0.01 millimeters. The company meets the quality requirements of high-end customers with advanced equipment and professional talents. Precision machined parts are the unsung heroes of modern manufacturing, serving as the building blocks for countless products across diverse industries. These components, characterized by their exacting tolerances and intricate features, are essential for ensuring optimal performance, reliability, and longevity in various applications. Understanding Precision Machining Precision machining is a manufacturing process that involves removing material from a workpiece to achieve precise dimensions, tolerances, and surface finishes. This intricate process employs advanced machinery, skilled operators, and meticulous quality control measures to create components that meet stringent engineering standards. The Importance of Precision Precision machined parts play a critical role in numerous sectors, including: Automotive: Engine components, transmission parts, and suspension systems rely on precision machining for optimal performance and efficiency. Aerospace: Aircraft and spacecraft components demand exceptional precision to ensure safety and reliability. Medical Devices: Precision machined parts are essential for the production of surgical instruments, implants, and diagnostic equipment. Electronics: From microchips to enclosures, precision machined components contribute to the functionality and durability of electronic devices. The Precision Machining Process The precision machining process typically involves the following steps: Material Selection: Choosing the appropriate metal or material based on the part's requirements. Design and Engineering: Creating detailed blueprints and CAD models to define the part's specifications. Machining: Utilizing advanced machines like lathes, milling machines, grinders, and CNC machines to remove material and achieve desired dimensions. Finishing: Applying surface treatments like polishing, coating, or heat treatment to enhance performance and durability. Quality Control: Implementing rigorous inspection and testing procedures to ensure parts meet stringent tolerances. Challenges and Advancements in Precision Machining Precision machining presents unique challenges, including: Tolerance Control: Achieving extremely tight tolerances requires advanced machinery and skilled operators. Material Selection: Selecting the right material for the application can be complex due to various factors like strength, weight, and cost. Surface Finish: Achieving desired surface finishes requires specialized equipment and techniques. ACE currently has a strong R&D and design team. The team can quickly and professionally provide design solutions for non-standard equipment products according to customer needs. Provide clients with an integrated solution from R&D design to production, commissioning and implementation.

Frame Assembly Focusing on providing production and assembly services for structural components, metal frames, PVC coatings, and other products for top semiconductor equipment manufacturers in China and the international market, we aspire to become a leading domestic precision metal structural component manufacturing and equipment assembly service provider in the semiconductor equipment field. Metal tube type frames, constructed from hollow metal tubes, have become a cornerstone in various industries due to their versatility, strength, and lightweight properties. These frames find applications in everything from furniture and machinery to automotive and aerospace sectors. But what makes metal tube type frames so desirable, and how are they constructed? Understanding Metal Tube Type Frames Metal tube type frames are fabricated by joining metal tubes through various methods, including welding, bolting, or riveting. The choice of metal, tube diameter, wall thickness, and joint type depends on the frame's intended application and load-bearing requirements. Key Advantages of Metal Tube Type Frames Strength and Durability: Metal tubes offer exceptional strength-to-weight ratios, making them ideal for applications requiring robust structures. Versatility: Metal tubes can be easily shaped and joined, allowing for the creation of intricate and customized frame designs. Lightweight: Compared to solid metal structures, tube frames are significantly lighter, reducing weight and improving efficiency. Cost-Effective: Metal tubes are often more economical than other materials, making them a viable option for various budgets. Applications of Metal Tube Type Frames The versatility of metal tube type frames has led to their widespread adoption across numerous industries: Furniture: Metal tube frames are used in furniture manufacturing for chairs, tables, and shelving units, offering a modern and industrial aesthetic. Machinery and Equipment: These frames provide the structural backbone for various machinery and equipment, ensuring stability and durability. Automotive and Aerospace: Metal tube frames are integral components in automotive and aerospace industries, contributing to lightweight and strong structures. Construction: Tube frames find applications in building construction for structural support, railings, and fencing. Design Considerations for Metal Tube Type Frames Designing metal tube type frames requires careful consideration of several factors: Load-bearing capacity: Determining the frame's ability to withstand anticipated loads. Material selection: Choosing the appropriate metal alloy based on strength, weight, and cost requirements. Joint design: Selecting suitable joints for connecting tubes, ensuring structural integrity. Manufacturing process: Determining the most efficient and cost-effective production method. Finish: Applying appropriate coatings or finishes to protect the frame from corrosion and enhance aesthetics. Metal tube type frames offer a multitude of advantages, making them a preferred choice for various applications. By understanding their characteristics and design considerations, engineers and manufacturers can harness their potential to create robust and efficient structures. Would you like to delve deeper into a specific application or aspect of metal tube type frames?

Telecommunication communication cabinets, often referred to as telecom cabinets, are the backbone of modern communication networks. These enclosures house vital telecommunication equipment, ensuring seamless connectivity and reliable communication services. The assembly of these cabinets demands precision, expertise, and adherence to stringent industry standards. The Assembly Process The assembly of a telecommunication communication cabinet typically involves the following stages: Cabinet Preparation Enclosure selection: Choosing the appropriate cabinet size, material, and environmental protection based on the equipment and deployment location. Internal structure: Installing mounting rails, shelves, and cable management systems to optimize equipment placement and airflow. Equipment Installation Component mounting: Securely installing telecommunication devices such as switches, routers, modems, and power supplies within the cabinet. Cable termination: Connecting cables and wires to the equipment, ensuring proper termination and labeling. Power distribution: Installing power distribution units and connecting power cables to the equipment. Testing and Commissioning Functional testing: Verifying the correct operation of all installed equipment. Network configuration: Configuring network settings and parameters. Performance evaluation: Assessing the overall performance of the cabinet and its equipment. Challenges and Best Practices Assembling telecommunication communication cabinets presents unique challenges: Space constraints: Efficiently utilizing limited cabinet space while ensuring optimal airflow and accessibility. Thermal management: Managing heat dissipation within the cabinet to prevent equipment failures. Electromagnetic interference (EMI): Shielding equipment from EMI to maintain signal integrity. To address these challenges, best practices include: Modular design: Using modular components for flexibility and scalability. Thermal management solutions: Implementing cooling systems or ventilation to regulate temperature. EMI shielding: Employing shielding materials and techniques to minimize interference. Quality control: Adhering to strict quality control measures throughout the assembly process. The company ACE has cooperated with customers from different manufacturing industries for many years, and has accumulated rich and valuable manufacturing and design experiences. We can provide end to end services from parts production to integrated assembly and desgin services to our customers. 

Integrated Assembly Products The company has more than 13 years of experience in the production, assembly, quality control, performance testing, and logistics service for OEM equipment products, and can provide customers with integrated assembly and solutions for complete sets of equipment. Electric control cabinets, the heart of industrial automation, house the electrical and electronic components that orchestrate the operation of machinery and processes. The assembly of these cabinets is a complex process that requires meticulous attention to detail, adherence to stringent standards, and specialized expertise. Let's delve into the intricacies of electric control cabinet assembly. Understanding the Assembly Process The assembly of an electric control cabinet involves several critical steps: Cabinet Preparation Selection of the enclosure: Choosing the appropriate cabinet size and material based on the components and environmental conditions. Mounting of internal components: Installing rails, mounting plates, and other structural elements to provide a solid foundation for the electrical components. Component Installation Component placement: Arranging and securing electrical components such as relays, contactors, PLCs, and power supplies within the cabinet according to the electrical schematic. Wiring and termination: Connecting the components using appropriate wires and terminals, ensuring accurate and reliable connections. Cable management: Organizing and routing cables to maintain a clean and efficient workspace within the cabinet. Testing and Commissioning Functional testing: Verifying the correct operation of all components and circuits. Performance evaluation: Assessing the overall performance of the control cabinet under simulated operating conditions. Documentation: Creating and maintaining comprehensive documentation, including wiring diagrams, test reports, and maintenance records. Challenges and Best Practices Electric control cabinet assembly presents a range of challenges, including: Complexity: Modern control cabinets often incorporate complex electrical and electronic systems, requiring skilled technicians. Space constraints: Efficiently utilizing limited cabinet space while ensuring proper component cooling and accessibility. Error prevention: Minimizing errors during wiring and assembly to prevent equipment malfunctions. To overcome these challenges, best practices include: Standardized procedures: Implementing clear and consistent assembly processes. Quality control measures: Conducting regular inspections and testing to ensure product quality. Continuous improvement: Identifying and addressing potential issues to optimize the assembly process. The Importance of Precision and Expertise Electric control cabinet assembly is a precision-driven process that demands a high level of expertise. Skilled technicians, combined with advanced tools and technologies, are essential for delivering control cabinets that meet the highest quality standards. By adhering to meticulous assembly procedures and implementing robust quality control measures, manufacturers can ensure the reliability and performance of their products, ultimately contributing to the success of their customers' operations. Electric control cabinet assembly is a critical aspect of industrial automation, and its importance cannot be overstated. By understanding the intricacies of the assembly process and implementing best practices, manufacturers can deliver control cabinets that meet the evolving demands of modern industries. Would you like to know more about specific aspects of electric control cabinet assembly, such as the types of components used or the industries where they are commonly employed?

The TDX 20W PD Fast Charger is the ultimate solution for lightning-fast charging speeds for your Smartphone or iPad. Engineered with cutting-edge USB-C Power Delivery (PD) technology, this compact yet powerful wall charger delivers up to 20W output, ensuring your devices are powered up in record time. Designed with international users in mind, it supports a wide input voltage range of 100-240V and complies with IEC/EN 62368 safety standards. Whether you're at home, in the office, or on the move, this charger offers global compatibility and performance reliability. Fast PD Charger Key Features: 20W USB-C PD Wall Charger: Fast-charges your Smartphone, iPad, gaming device, or drone with ease. Compact & Travel-Ready: Ultra-portable with a rounded edge design and foldable prongs – ideal for business trips and travel. Universal Compatibility: One plug to charge multiple devices, replacing the need for multiple bulky chargers. Smart Protection Built-in: Equipped with OVP/OCP/OTP/SCP to ensure safe charging – protecting your devices from over-voltage, over-current, over- temperature, and short circuits. Extensive Safety Approvals: Certified by UL, CE, FCC, PSE, SAA, KC, GS, and CB for global distribution. Tested for Durability: Passed temperature, surge, vibration, and high-voltage insulation tests for long-lasting performance.

The 60W interchangeable power adapter is AC to DC adapter, it is made of high-quality materials and undergoes rigorous quality testing. It features built-in over current, over voltage, over temperature, and short-circuit protection. Users can verify the safety certification by checking the certification, ensuring safe and reliable daily use It has robust casing protects against scratches,bumps, drops, withstands pressure and keeps internal components safe during emergencies enhanced longevity.Compact and portable. This power adapter has no fan and noise, and has 8 intelligent protections: high temperature/static/output over voltage/input over voltage/input over current/output over current/intelligent current/short circuit protection. More protection to ensure safety in use.

Wall Mount Power Adapter Specifications: Input voltage range: AC100-240V Input frequency range: 47-63HZ Input current range: 1.5A Max Output voltage range: DC 5-24V Output current range: 0-5A Unload standby power: 0.1W Max Efficiency: 87%Min Ripple and noise: 240mVp-p Max Max Surge: 1KV Meet the safety standard: IEC/EN 62368 Size: L*W*H=79.5*45*31.6mm The 36W Wall Mount Power Adapter Range starts from 9V to 24V with fixed plugs, they are reliable and durable solution for powering your most demanding electronics. Designed with advanced safety features, and is certified safe with built-in short circuit, overload, and over voltage protection. Featuring an input voltage AC 90-264V, the adapter is universally compatible with a variety of electronics.UK US AU EU Korean Japan Plug options, KC PSE ETL FCC CE ROHS REACH Certifications, unleaded materials

High Efficiency, Broad Compatibility – Ideal for Industrial and Commercial Applications The TDX 42W AC to DC Desktop Power Adapter delivers reliable performance with a universal input voltage range of AC100-240V and an adjustable DC output from 12V to 24V. With a compact design and robust features, it's suitable for a wide range of applications including LED lighting, routers, displays, small appliances, and industrial devices. 42W AC to DC Desktop Power Adapter Key Specifications Input Voltage Range: AC100–240V Input Frequency: 47–63Hz Max Input Current: 2A Output Voltage Range: DC 12–24V (customizable) Output Current Range: 0–3.5A Max Output Power: 42W (12V @ 3.5A) No-load Standby Power Consumption: ≤0.1W Max Efficiency: ≥87% Ripple & Noise: ≤240mVp-p Surge Protection: Up to 1KV Safety Compliance: IEC/EN 62368 Dimensions: 99 × 50 × 30 mm (L×W×H)

90W Desktop Power Adapter – High efficiency, 94V-0 fireproof, DOE VI/EU ERP/COC5 compliant, IEC/EN 62368 certified. Applications of 90W Desktop Power Adapter The 90W Desktop power adapter widely used for LED Lights / Home Electronics / 3C Consumer Electronics / Safety Precautions/ Printers / Motor Drive /IT & Audio Smart Speaker /Monitors & Projectors / Industrial Equipment / Medical Equipment etc. Home Electronics: Perfect for powering LED lighting, smart home devices, and a wide array of household electronics, ensuring a stable and efficient energy supply. 3C Consumer Electronics: Seamlessly power smartphones, tablets, and other digital devices, ensuring optimal operation. Safety Equipment & Printers: Enhance the reliability of safety precaution systems and printing devices with stable, high-efficiency power delivery. Motor Drives & IT Devices: Support the dynamic demands of motor drives and IT infrastructures with robust energy output. Audio Smart Speakers, Monitors & Projectors: Experience clear, uninterrupted performance in audio systems, visual displays, and projection equipment. Industrial & Medical Equipment: Benefit from precise power management that meets the rigorous standards of industrial machinery and sensitive medical devices. https://www.tdxadapters.com/

High- voltage static var compensator (SVC) is a shunt device of the flexible AC transmission system (FACTS) family using power electrics to control power flow and improve transient stability on power grid. Increase the ability of transmission and strengthen the damping of low frequency oscillation and suppress sub synchronous oscillation. in addition, SVC suppress the busbar voltage change that when cause by impact load, is better to transient voltage recover, improve the system voltage stability, when this device is applied to distribution network, such as electric railway, metallurgy and other industry, the users can control reactive power effectively, improve power factor, reduce voltage influence and harmonic interference that cause by nonlinear load, balance three phase load, improve power quality, efficiency and product quality, reduce the energy consumption. Static VAR Compensators (SVCs) can be customized to the specific needs of each customer. SVCs consist of multiple fixed or switched branches, at least one of which includes thyristors, and the combination of branches can vary greatly depending on the requirements. SVCs typically include a combination of at least two of the following given items (e.g. TCR/FC or TCR/TSC/FC): Thyristor Controlled Reactors (TCR) Thyristor Switched Capacitors (TSC) Harmonic Filters (FC) The most common topologies for static VAR compensators are: TCR/FC or TCR/TSC/FC. The main advantage of using a topology with TSC branches is reduced losses (by reducing filter size). Hitachi Energy's SVC control system can be used to control new or existing external shunt banks.

Common Rail Fuel Injector Control Valve F00RJ01479 Common Rail Fuel Injector Control Valve F00RJ01704 Common Rail Fuel Injector Control Valve F00RJ02466 Common Rail Fuel Injector Control Valve F00RJ02472 Common Rail Fuel Injector Control Valve F00V C01 306 Common Rail Fuel Injector Control Valve F00VC01013 Contact me to get more Information? WhatsApp：6SF whatsapp/wechat: 0086/135/1405/ 8328 e-m-a-il eric at china-lutong dot net FAQ 1. Q: Are you a factory or trading company? A: We are a genuine manufacturer. 2. How is your quality and service? Our manufacture has domestic first-class production line and offer the high quality products and best service to be your honest supplier 3. Q: How can I get some samples? We are honored to offer you samples. There are enough ready samples for regular models in our company, we will send them out ASAP.

JXF Distribution Box is a modular distribution box with advanced technology and performance introduced from ABB. This product is equipped with a miniature circuit breaker to prevent line overload and short circuit, and reliably ensure the safety of lines and equipment. The structure of the busbar on the distribution board has been reasonably improved. The distribution board meets the requirements of modularization. The MCB series distribution box is mainly used in various places such as civil buildings, factories, shopping malls, schools, and government offices. It can also be used as a protection for overload, short circuit, leakage, and undervoltage in frequent line conversion and low-power power lines. The installation method includes open installation and concealed installation, and the gourd hole wall hanging type can be used. It is installed with screws and has a mounting plate inside. The power distribution box (cabinet) is closed, the shell is generally welded with cold rolled steel plate, and can also be assembled with profiles, the left and right side walls of the box welding electrical original installation column, the whole piece can also be installed according to the plate, using standardized design and production. The same products can be interchangeable, surface spray, fixed flat. It can also be operated in full serial number, the above can be used for voltage, ammeter indicator light measurement and measurement and button operation; open the door can detect the equipment. Hand can also be used double bottom plate, so that personnel can not directly contact the conductive body, to ensure safety.

XL-21 power distribution box is suitable for ac 50 (60) HZ, voltage to 690V, power supply system, for power or lighting power distribution, suitable for industrial and mining enterprises and various civil buildings, with overload, short circuit and leakage protection. This product meets the standard of GB 7251.1 Low Pressure Complete Switchgear and Control Equipment. Technical data Rated operating voltage: 380V (690V) Rated operating voltage: 50 HZ (60 HZ) The maximum rated working current is 630A Rated short time (1S) tolerance current 30 KA Rated peak tolerance current of 63 KA Protection grade IP20, P30, IP40, IP54