Switch Power Supply

Product Name: Wired Single Light Controller Model No: SS-LED-010V1C220VWD Product Description: Developed and produced according to industrial design standards, a wired single lamp controller is suitable for street lights, landscape lights centralized switch, dimming control, and real-time monitoring of electricity and voltage. Through wired transmission of 220V power supply and control signal at the same time, save wiring costs, simplify installation steps, suitable for large-scale lighting renovation projects. Main Features: 1.Manually and regularly control individual street lamp switch and brightness adjustment. The power cable can transmit 220V power and control signals at the same time 2.Can monitor the voltage, current, power, electricity and other electrical parameters of a single street lamp 3.Can control the output of up to 10A 220V AC voltage to provide power for single street lights 4.Supports 220V 5A power input and can withstand 400V AC voltage for a long time to avoid damage to the single lamp controller due to incorrect cable connections. 5.Supports single 0 to 10V dimming for LED street lights (LED drivers support 0-10V dimming interfaces). Main Application: It is suitable for the centralized control of traditional street lights and large-scale landscape lights. By installing a single lamp controller, it can monitor the online, offline and power consumption parameters of each street light, remotely open and close the street light, or realize the automatic dimming control of the street light according to the timing plan, saving manual inspection, maintenance costs, energy saving and emission reduction.

Minimum Order: 1 bags

Aokai dual power supply boxes deliver seamless 0.2s power transfer between mains & generators, ensuring 24/7 uptime for hospitals, data centers, and industrial facilities. Featuring fireproof IP65 enclosures, IoT-ready remote monitoring, and dual mechanical interlocks – trusted by Schneider, Cummins, and 1000+ mission-critical projects globally. Key Features Automatic Switching: Equipped with advanced technology, the Dual Power Supply Box can automatically detect power failures and switch to the backup power source without manual intervention. High Reliability: Designed with mechanical and electrical interlocking systems to prevent simultaneous connection of both power sources, ensuring safe and reliable operation. Wide Application Range: Suitable for environments requiring high power reliability, including hospitals, shopping malls, banks, and industrial facilities. Customizable Options: Available in various configurations to meet specific project requirements, including indoor installation and different rated current capacities. HWX Dual Power Supply Box Applications Industrial Automation: Ensures uninterrupted power supply for critical machinery and equipment. Data Centers: Maintains continuous operation of servers and networking equipment.

The Internet of Things (IoT) is network composed of connected goods, including Internet services interacting with these goods, forming limited data transmission carrier; flexible intelligent bus duct is humanized improvement of bus duct distribution system, combined with measurement and control technology and automatic monitoring, recording, storing software system and Internet networking linkage, having the function of monitoring data analysis, signal transmission, failure warning and releasing., to realize the safe operation of engineering power distribution system. The products are widely used in power distribution engineering of nuclear power rod control room, telecommunication center, cloud data center IT cabinet, IDC room, machine tool intensive workshop, large conference center, large theater, large buildings and hotel. Provide more convenient and safe services for customers'daily operation and maintenance of distribution system. Technical support for loT flexible intelligent busway 1.Adoption of standards: 1.1 National Standard(GB7251.1-2013)"Low-voltage switchgear and controlgear assemblies 1.2  National  Standard(GB7251.6-2015)"Low-voltage  switchgear  and  controlgear  assemblies Part 6:Busbar trunking systems(busways) 1.3  National  Standard(GB7251.8-2005)"Low-voltage  switchgear  and  controlgear  assemblies- General Technology Requirement for Intelligent assemblies; 1.4 National standard(GB 50054-95)"Code for design oflow voltage electrial installations; 1.5 National Standard(GB/T50314-2000)"Standard for Design of Intelligent Building 1.6 National Standard(GB4208-2008)"Degrees of Protection Provided by Enclosure(IP Code)

LQJ Series aluminum cable are new varieties of products resarched and produced by our factory and Qinhua university. with the rapid development of modern industry, the requirement of power cable, control cable and communication cable increases So quickly, therefore cables are widely used. They can be used for the factory and the ship, So that the cable laying of the oil extraction terrace in the sea reaches standardization , and general purpose. They give the convinience to the project design, construction installlation and safe production. The aluminim cable produced by our factory is adopted with the same effect by the standarization of American material, having the function of high touch- resistence. Because of the reasonable design of the cross section of aluminum material , the integral structire is So compact, flexible and changeable in installation that it has such advantages as heavy load, ligh weight, convenient installation and beautiful modelling, holding a safe lead at home and adroad. Model H W Weight LQJ-WC-2 . 5 -5 25 50 2 .73 LQJ-WC-2.5 - 10 100 4 . 61 LQJ-WC-2 .5 - 15 150 5 . 07 LQJ-WC-2.5 -20 200 7 . 67 LQJ-WC5 -5 50 50 3 . 20 LQJ-WC5- 10 100 5 . 12 LQJ-WC5- 15 150 6.96 LQJ-WC5-20 200 8 . 19 LQJ-WC10-5 100 6 . 18 LQJ-WC10- 10 150 8 . 02 LQJ-WC10- 15 200 9 . 24 LQJ-WC10-20 250 11 . 08

FQJ Series cable have good function like heat insulation, fire-proof, corrnsion-resisting and also are suiable for wide-ranging environment. They have characteristics of light weight, heavy load and reliable safety, and also have reached the advanced standard in country. FQJ Series of fire-proof channel box can be divided into for parts as follows according to different use occasions. (1) Fully-sealed channel box of fire-proof type: The product suits the power cable below 10kv, and also suits the control cable, lightening Lines to be Laid in the areial cable ditch and channel indoors or outdoors. (2) Half-sealed channel box of the fire-proof type: The product can experience flame stifling, temperature in the channel can be limited to be permitted value for the safety motion of cable. The box cover is double board. Besides the function against rain, if can fall automatically when temperature is high enough, covering the cooling hole to avoid air. (3) Fire-proof channel box for cable tunnel: The product is widely-used for the tunnel, some undergroundpublic facilities and some other occasions. It"ps well ventilated. when the channel box catches fire or the cable is hotter, the opened ventilated mesh soaked with special refractory coating is blocked becase of the flames, and also expanded to thick carbombits covering the cable, the small cover on the net falls automatically to cover the net face, as a result, causing the burning medium to go out because of the absence of oxygen. (4) Inorganic channel box of fire-proof type: The product is formed with the inorganic materical and strengthed glass fibre. The refractory structure is fully seally. It can prevent efficiently the self-burning of the cable and the danger of the outer kindling material · Because of inorganic material, it is especially suitable for the occasions of serious acid and alkali corrosion.

XQJ-C type of channel-type cable is fully sealed. It is suitable for Laying computer cable, Communication cable, thermo-coupel cable and control cable with other sensitive system.It has a good effect on the screen interference of control cable and the protection of cable in heavy corrosion envionment. Model A×B   Specification kg Weight Weight C-1A-1 50×25 4.81 2.12 C-1A-2 100×50 8.81 4 C-1A-3 150×75 12.82 5.8 C-1A-4 200×100 22.98 8.05 C-1A-5 250×125 28.92 9.3 C-1A-6 300×150 41.58 13.53 C-1A-7 400×200 69.85 21.89 C-1A-8 500×200 80.41 26.84 C-1A-9 600×200 86.10 38.17 C-1A-10 800×200 101.71 58.15

JXF Distribution Box is a modular distribution box with advanced technology and performance introduced from ABB. This product is equipped with a miniature circuit breaker to prevent line overload and short circuit, and reliably ensure the safety of lines and equipment. The structure of the busbar on the distribution board has been reasonably improved. The distribution board meets the requirements of modularization. The MCB series distribution box is mainly used in various places such as civil buildings, factories, shopping malls, schools, and government offices. It can also be used as a protection for overload, short circuit, leakage, and undervoltage in frequent line conversion and low-power power lines. The installation method includes open installation and concealed installation, and the gourd hole wall hanging type can be used. It is installed with screws and has a mounting plate inside. The power distribution box (cabinet) is closed, the shell is generally welded with cold rolled steel plate, and can also be assembled with profiles, the left and right side walls of the box welding electrical original installation column, the whole piece can also be installed according to the plate, using standardized design and production. The same products can be interchangeable, surface spray, fixed flat. It can also be operated in full serial number, the above can be used for voltage, ammeter indicator light measurement and measurement and button operation; open the door can detect the equipment. Hand can also be used double bottom plate, so that personnel can not directly contact the conductive body, to ensure safety.

XL-21 power distribution box is suitable for ac 50 (60) HZ, voltage to 690V, power supply system, for power or lighting power distribution, suitable for industrial and mining enterprises and various civil buildings, with overload, short circuit and leakage protection. This product meets the standard of GB 7251.1 Low Pressure Complete Switchgear and Control Equipment. Technical data Rated operating voltage: 380V (690V) Rated operating voltage: 50 HZ (60 HZ) The maximum rated working current is 630A Rated short time (1S) tolerance current 30 KA Rated peak tolerance current of 63 KA Protection grade IP20, P30, IP40, IP54

Aokai provides MDrail-E Low Voltage Distribution Panel, fireproof enclosures with modular DIN-rail design, ensuring safe and flexible power distribution for factories, solar plants, and smart buildings. Our cabinets are UL 61439-2 & IEC 60439-1 certified, trusted by 500+ global clients including Siemens and Schneider Electric. Technical Parameters MDrail-E Product standards GB 7251.1, GB 7251.12, IEC 61439-1, IEC 61439-2 Maximum rated insulation voltage 1000 V AC Rated operating voltage 400 V/690 V AC Rated current Wall-mounted box 250 /400 A Standing cabinet 630 A Rated short-time withstand current Wall-mounted box 10 kA/1s Standing cabinet 20 kA/1s Door type Metal door/Glass door/French door

KYN28-12 indoor communication metal armoured open switchgear(hereinatter referred to as the switchgear), department ofthree-phase ac50hz single busbar and double bus section system of indoor complete sets of power distribution equipment, applicable to power plants, substations, and industial and mining enterprises of rated voltage 3.6~12kv power grid, as acceptance and distribution of electrical energy, and the circuit implementation ofcontrol, protection and monitoring.Switch cabinet can be used both domestic well-known brand vacuum circuit breaker(VS¹series, for example), and can choose the intermational well-known brand vacuum circuit breaker(such as ABB VD4 series, the series of Siemens 3ae, schneider company HVX series), can also beinstaled isolation devices or below 12 kv vacuum contactor, complete sets of equipment can meet the requirements of power grid forhigh voltage switchgear, and is suitable for "ive prevention"and the full process, fuly enclosed, the insulation condition, it isa kind of superior performance ofthe power distribution device. High-voltage Switchgear Use Conditions 1. Ambient temperature: upper limit+40℃, lowerlimit-25℃; 2. Altitude: not higher than 1000m; 3. Relative humidity: daily averagerelative humidity not over 95%, monthly average relative humidity notover 90%; 4. Earthquake strength: not surpass8degree; 5. Locations where no obvious fire or explosive danger, not heavily polluted, no corrosion.

GCS type low-voltage switchgear (hereinafter referred to as device) is the ministry of electric power industry, machinery industry to promote the technological progress of low-voltage distribution industry in China, accelerate the upgrading of low-voltage distribution of switch equipment, protect and promote the national industry for the purpose, in 1995 entrust the source electric co., LTD organized two GCS type low-voltage switchgear joint design group (hereinafter referred to as the two joint group) complete design and development, at present in the country has been preliminary affirmation and selection, to facilitate the design, use unit application, write this specification. The device is suitable for power conversion, distribution and control of power, distribution and motor control center, capacitor compensation, including power plant, substation, petrochemical department, factory and mining enterprises, and high-rise buildings. In the power plant with large single capacity, the low-voltage power control center and motor control center can meet the special needs of the interface with the computer.

Cable wire lugs are made to accommodate a variety of wire types, making electrical connections simpler. This enables you to connect thick cables to a connector that may have a smaller diameter. Safer Connection. The purpose of Cable Lug's invention was to guarantee both user and electrician safety. For our customers, we offer every style and size of cable lug. Hebei Yongguang Line Equipment Co., Ltd. is a Cable Wire Lugs company, we provide electrical cable termination lugs, ground wire terminal lugs, stainless steel wire lugs, copper electrical lugs, copper wire aluminum terminal, wire end lugs, insulating fittings, etc. For more information, please feel free to contact us!

Minimum Order: 1000

Qx80h is Mitsubishi q series DC high-speed input module, negative common terminal type, 16 points. Qx80h price (face price), the market stock is very small. Qx80h Parameter Description: 24VDC / 4mA, common cathode, 16 points, terminal block (high speed). Specification details of Mitsubishi PLC module qx80h: [input form] DC input module (negative common end) [input points] 16 points [isolation method] Optocoupler [rated input voltage] DC24V (+ 20% - 15%, ripple coefficient above 5%) [rated input current] about 6mA [derating chart] [on voltage / on current] 13V or higher / 3mA or higher [off voltage / off current] 8V or less / 1.6mA or less [input impedance] about 3.9k Ω [function setting SW2] off interrupt, on high speed input [dielectric withstand voltage] 560vac MS / 3 cycles (altitude 2000m (6557.38 feet)) [insulation resistance] 10m Ω or higher measured by insulation resistance tester [immunity] through 1500vp-p noise voltage, 1 μ Voice simulator with s voice width and 25 to 60Hz voice frequency First instantaneous voice iec61000-4-4: 1kV [protection grade] IP2X [common terminal arrangement] 8 points / common terminal (common terminal: tb9, tb18) [I / O points] 16 (I / O allocation is set to 16 point high-speed input module or interrupt module.) [working status indicator] set by setting in GX developer switch [running indicator] on indication (LED) [external connection] 18 point terminal block (M3 * 6 screw) [applicable wire diameter] core 0.3mm2 to 0.75mm2 (maximum outer diameter 2.8mm) [applicable to clamping terminal] R1 25 ~ 3 (clamping terminal with sleeve cannot be used) [5VDC internal current consumption] 80mA (standard: all points on) [overall dimension (h * w * d)] 98 * 27.4 * 90 [mm] [weight] 0.16kg

Minimum Order: 1 bags

Specification of Mitsubishi FL net interface moudel qj71fl71-t-f01: 1. Transmission instructions [data transfer speed] 100base-tx: 100Mbps (full duplex / half duplex) 10Base-T: 10Mbps (half duplex) [transmission mode] baseband [electronic interface] IEEE802 3 standard (CSMA / CD standard) [Transport Protocol] UDP / IP FA link protocol [maximum section length] 100m [maximum number of stations in the system] 254 [maximum number of sites] 254 modules / all internal address blocks [minimum station spacing] 2.5m [cyclic data amount] maximum (8K bits + 8K words) / system, maximum (8K bits + 8K words) / station [information data capacity] 1024 bytes maximum 2. Link data description [public storage area] area 1 (bit area) 8K / bit area 2 (word area) 8K words [virtual address space and physical memory] none [error record storage area] 512 words [status storage area] bit area 2K / bit word area 2K [local station network parameter setting area] 96 words [network parameter setting area of other stations] 2048 words [network parameter acquisition area] 512 words [soft component storage area] 512 words [information area (instantaneous area)] 1024 bytes * 2 at most (transmit receive each) 3. Transmission instructions [information transmission] 500ms or less (1:1 one-way information arrival time) [token start time] Newly added: start time = 3000 + (minimum number of sites / remaining 8) * 4 + 1200ms Joining: joining time = refresh cycle * 3 + number of local stations * 4ms 4. Other specifications [input / output points] 32 points (I / O allocation: smart) [5VDC internal current consumption] 0.50a [noise resistance, voltage resistance, insulation resistance] according to the power instructions for installing the fl net site [external dimension h * w * D] 98 * 27.4 * 90mm [weight] 0.11kg

Minimum Order: 1 bags