Electronics & Electrical

Spiral Vibration Damper reduces Vibration (the high frequency, low amplitude vibration caused by horizontal wind passing across the line. It is designed to be used on OPGW and conductors with an outside diameter less than 0.75". Spiral Vibration Damper Spiral vibration dampers are motion-control products designed to eliminate wind vibration that can occur across a cable span. Made of weather and corrosion resistant plastic, these transmission line vibration dampers have large spiral shaped vibration dampening sections that fit the size of the cable. A smaller clamping section gently grips the conductor. Using the recommended number of spiral dampers minimizes bending strain and protects the cable from long-term fatigue caused by breeze vibration.

They are similar to a drop wire clamp. This mechanical device is a single-tension piece of hardware used to fasten overhead transmission and distribution wires and cables to a pole, building, etc. Steel Cable Clamps will compress those wires and cables to become horizontally straight. Or at least straight enough that the wire won’t stoop too low. Cable Tension Clamps are also used to support the cable’s weight, keeping tension on the line while relieving stress on the attachment points.

ADSS hardware are used to secure ADSS cables to utility poles. The integration test between the fitting and the cable is approved according to the "NESC Heavy Duty" standard. The correct ADSS hardware are determined by the outside diameter of the cable and the length of the span to be covered. What is an ADSS cable? ADSS (All Dielectric Self-Supporting) cables are ideal for installation in power distribution and transmission environments, even when a live installation is required. As the name implies, no supports or slings are required, so a single installation is all that is needed, making ADSS an economical and simple way to.

DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Downlead Clamp Downlead clamp is used to guide fiber optic ground wire (OPGW) from the top of the structure to the junction box.Huaneng's lead-off clips are easy to install, provide proper spacing and maintain strength without damaging the cable. From poles to towers, Huaneng offers a full line of downlead clamp for OPGW to meet the needs of any application.

ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. Tension Clamp ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters.

OPGW joint boxs, also known as splitter boxes, are designed to accommodate core connectors to the outdoor intermediate fiber optic cable leading to the control room patch panel. Fiber core connectors are used to connect backbone fiber optic cables (such as OPGW) OPGW Joint Box The OPGW joint box is used to store the fiber core splices leading to the control room patch panel.The OPGW junction box is a key component in the installation and maintenance of OPGW cables, and is used to place, protect, and organize the splices or splices of the fibers within the OPGW cable.

The LHT-840CN full-color night vision camera is the perfect choice for all- weather HD surveillance! Whether in extreme low light or total darkness, it breaks through the limitations of darkness, delivering clear and vivid color images. It makes nighttime surveillance more intuitive and accurate, allowing for easy target identification even in the dark. It provides clear and reliable surveillance for various scenarios, including security and outdoor monitoring, ensuring safety and clarity in every corner. Technical Parameters: Image Sensor 1/1.8”CMOS Effective Pixels 2688*1520 Pixel size 2.9um*2.9um Video output MJPG/YUY2 Maximum Frame Rates(MJPG Resolution and frame rate) MJPG 2688*1520/30fps Maximum Frame Rates(YUY2 Resolution and frame rate) YUY2 1920*1080/5fps Dynamic range ≥100dB Min.Illumination 0.001Lux Digital interface 5pin 1.0mm USB2.0 Power requirements 5V±0.5 Power Consumption 1.5W±0.2

The LHT-FP60849 fingerprint recognition module is a self-developed, high- performance verification device equipped with a semiconductor fingerprint sensor that can capture fingerprints in all finger positions. It also features a dedicated algorithm and comes in a modular form factor. The entire device has passed security testing and certification, supports secondary development, and can be embedded into user products. Camera Modules Parameters: Appearance Size Dimensions (LengthWidthHeight) 53 × 38×6 (unit: mm) Power Consumption DC 3.3V ===135mA Communication Interface UART Sensor Type Semiconductor (Area/Pressure Type) Effective Image Area 19.9 mm x 14.35 mm Fingerprint Image Resolution 256*360 Image Resolution 508 DPI Basic Function Fingerprint Collection/Authentication Image Gray Level 8-bit, 256 levels Dynamic Range of Gray Level ≥220 Image Background Unevenness ≤10% Algorithm Collection Collection Time <0.25s Matching Mode 1:1 or 1:N Relative Speed 0.06s

The MIPI Camera Modules series miniature camera, equipped with PrimeSensor CMOS and Taiwan's latest DSP technology, delivers high-quality images. Its compact, 70*12mm body boasts a sturdy construction and exceptional stability. Its excellent low-light performance, combined with automatic white balance and automatic autofocus (AE) adjustment, allows for flexible adaptation to diverse environments. Built-in lightning protection ensures safety and reliability. This makes it widely applicable across various industries, including finance and government affairs, and suitable for various self-service devices and facial recognition applications. It is an ideal choice for efficient, adaptable, and high-performance miniature cameras. Signal RGB+IR MIPI Scanning Frequency (V) 50HZ 50HZ Image Sensor 1/2.5 ”CMOS 1/5 ”CMOS(CustomizeGC5035) Effective Pixels 2592*1944 2592*1944 Video output MJPG/YUY2 RGB/RAW   Maximum Frame Rates RGB+IR 2592*1944/30fps    MIPI 2592*1944     Maximum Frame R , ates RGB+IR 2592*1944/2fps   Dynamic range 85dB 64.7DB Digital interface 30Pin 0.5MM H :1.5MM  Flip Connector Power requirements 5V+-0.5 AVDD:2.8V IOVDD :1.8V DVDD:1.2V Power Consu , mption 2W <1W Dimensions(mm) 70mmx12mm

The LHT-CC3MU trinocular camera module features dual 3MP + 2MP sensors, supports automatic infrared fill light, autofocus, automatic gain control/white balance, liveness detection, and facial recognition with software. Power consumption is as low as 1W, and it supports Windows, Android, and Linux systems. It's plug-and-play, requiring no drivers, for convenient and fast operation. This product features dual 1/3" CMOS + 1/5" CMOS sensors, supports MJPG/YUY2 formats, and has a standard size of 70*12*7mm. Customizable lens angles and dimensions are available, and the normal light facial recognition range is 30- 120cm. A 3-meter, 5-pin, 1.25mm USB 2.0 cable is included. It is suitable for a variety of scenarios, including security surveillance, industrial inspection, and smart devices, providing clear and stable images for visual applications. Dual Lens Camera Modules Technical Parameters: Pixel size 2.2um*2.2um 2.2um*2.2um   Video output MJPG/YUY2 MJPG/YUY2 MJPG/YUY2 Maximum Frame Rates (MJPG Resolution and Frame Rate） Black and White 2048*1536   Color 2048*1536   1600*1200   Maximum Frame Rates (YUY2 Resolution and Frame Rate） Black and White 2048*1536   Color 2048*1536   1600*1200   Dynamic range 69.5dB 69.5dB   Min.Illumination 1LUTX 1LUTX 1LUTX Digital interface 5-pin 1.25mm USB2.0 5-pin 1.25mm USB2.0 MIPI Power requirements 5V+-0.5 5V+-0.5 5V+-0.5 Power Consumption 1W 1W 1W

The LHT-HDO5B 5-megapixel HDR monocular wide-angle recording and video camera module features a 1/2.5" CMOS image sensor and supports recording and video at resolutions up to 2592 x 1944 pixels at 30 fps. Its high frame rate and high dynamic range ensure smooth and clear video. The LHT-HDO5B camera module offers HDR and low-light performance, a built-in microphone, and a voice pickup range of up to 3 meters. This UVC-compliant, plug-and-play camera module is compatible with Windows, Linux, and Android operating systems and is suitable for machine vision, industrial inspection, video conferencing, and other applications. Technical Parameters: Image Sensor 1/2.5 ”CMOS Effective  Pixels 2592*1944 Pixel size 2.2umx2.2um Video output MJPG  YUY2 Maximum Frame Rates(MJPG Resolution and Frame Rate) 2592*1944/25fps      Maximum Frame Rates(YUY2 Resolution and Frame Rate) 2592*1944/5fps      Dynamic range ≤100dB Digital interface 5-pin 1.25mm USB2.0 Power requirements 5V+-0.5 Power Consumption 2W Dimensions mm 35.5mmx30mm Operatingtemperature(℃) -15~60℃

The FUBC-31AB-XX USB 3.1 Gen 1(5Gbps) Hybrid AOC-Active Optical Cable, type A Male to Micro-B offer a solution to a significant limitation of pure optical cables: the inability to power end devices. Employing a sleek, high-flex (4.8 mm) optical fiber as its transmission medium, the USB 3.1 Hybrid Active Optical Cable innovatively integrates copper for supplying power to both the cable’s active components and the connected device(s), particularly when they’re bus-powered. Extending the USB 3.x bus to a remarkable 20 meters or 65 ft, this USB 3.1 Hybrid Active Optical Cable ensures a maximum bandwidth speed of 5 Gbps. With a Micro-B connector boasting screw lock support, it’s perfectly suited for machine vision, industrial, and robotic applications. Fiber Optic USB 3.1 Type-A Male to Micro-B Link Cable USB 3.1 up to 5Gbps@20m(65ft) Practically Zero EMI/RFI profile for flawless performance Hybrid design requires no external power Drag chain test 20 million times Type A with locked screw optional

Minimum Order: 1 bags

Model Number:5o0035480600800SK Frequency Range:600~800MHz Insertion Loss:0.5dB Isolation:19dB VSWR:1.25 Forwa , rd Power:100W Reverse Power:100W Temperature:-20~+65℃ Dimension: , 35*56*15mm 5o.com is a modern high-tech enterprise specializing in passive RF and microwave components, integrating R&D, production, and sales. The company focuses on technological innovation as its core and relies on technology leadership. The company's main products: Microwave RF isolators, circulators, coaxial terminations, coaxial attenuators, power splitters/dividers, waveguide to coaxial adapters, directional couplers, RF filters, and duplexers/multiplexers and other microwave passive components.

Minimum Order: 1 bags

Model Number:5o011925012001400 Frequency Range:1200~1400MHz Insertion loss:0.3dB Isolation:22dB VSWR:1.2 Forwar , d Power:100W Reverse Power:100W Temperature:-40 ~ +85℃ Dimension:19*25.4*8.6mm Impedance:50

Minimum Order: 1 bags