Brake Systems

Commercial Vehicle Brake Pad WVA 29174 Product Description ECE-R90 Certificate approved With warranty of 100000km-200000km OE supplier for 20 years Heat resistance of more than 600 degree centigrades Friendly to disc, no noise Produce own back plates to control quality step by step 20 days for one container to deliver The Bus Brake Pad is one of the most important elements that make up the air disc brake assembly on buses and coaches, in fact it is the largest component. The brake disc provides the contact surface for the brake pads, which creates friction for the braking system, so it is subject to a lot of pressure and heat. These ALLMAX Commercial Brake Pads are made of alloy and are durable. Designed to give you the best driving experience for as long as possible. Once you install them and start driving, you will most likely notice changes. Dirt and other annoying particles that can cause degradation (especially crowded rides!) are not a problem. Our prices are great, but so are our discounts!

Minimum Order: 10 long tons

Comercial Vehicle Brake Lining WVA 19488 Product Description With warranty of 50000km-100000km OE supplier for 20 years Heat resistance of more than 600 degree centigrades No noise 30 days for one container to deliver Position Rear Axle Drum Diameter 410mm Width 223mm Thickness 17.0/11.8 mm Outer Length 192 mm Inner Length 177 mm Radius 200 mm Number of holes 8 Vehicles extend our range of activities, indeed they are not only tools but friends. Proper maintenance and repairs can keep them in good shape, and a lot of auto parts and accessories are required.

Minimum Order: 10 long tons

Comercial Vehicle Brake Pad WVA 29244 Product Description ECE-R90 Certificate approved With warranty of 100000km-200000km OE supplier for 20 years Heat resistance of more than 600 degree centigrade Friendly to disc, no noise Produce own back plates to control quality step by step 20 days for one container to deliver How is the Mercedes Benz Brake Pad different? Design: Pad designed to hold calipers. These Brake pads include holes for caliper guide pins that are inserted and then secured with cotter pins. They are mainly installed on sports cars. Floating caliper pad. This is the most common design. They hang securely on the stand. Leaf springs are used to relieve pressure and prevent vibration. Material: Organic Mat. They're cheap, nearly silent, and won't damage discs. However, they wear out quickly and generate a lot of dust. Suitable for small vehicles. Low metal pads. They are more durable. Brake pads help reduce the braking distance of the vehicle. They are the best option for moderate driving. Semi-metallic pads. They contain high levels of steel and copper fibers as well as graphite. These are high performance components and very durable. They can resist Overheating. Due to their conductive properties, brakes can be cooled more efficiently. These parts are cheap but can damage the surface of the disc. They make a lot of Noise when braking. These pads are usually only installed on commercial vehicles and sports cars.

Minimum Order: 10 long tons

All the profucts can process by customization. Please send me the 2D and 3D drawings with size and tolerance. We will evaluate the drawings for you and process according to the drawings. And we will keep the drawings strictly confidential. Customers can also choose processing methods With over 20 years experience, ShenZhen YuJiaXin Hardware Products Co., Ltd. is a leading manufacturer of precision metal parts in China, we provide products to consumer electronics, automotive, medical, and industrial. Metal Injection Molding,or MIM,is a new Powder Metallurgy process that can produce sintered componects with high densety and complicated shapes without the need for machining. With its unique characteristics, MIM is capable of producing precise metal parts for a wide range of products, including automobiles, cellular phones,hand tools,dental instruments,pneumatic tools, power hand tools, surgical instruments,sporting goods, and laptop computers. The common materials used in MIM range from stainless steels and alloy steels to soft magnetic matericals. Metal injection molding (MIM) is an effective way to produce complex and precision- shaped parts from a variety of materials. This process produces parts for 50% less than the cost of CNC machining or casting. MIM is able to produce parts with complex shapes, superior strength and excellent surface finish with high volume manufacturing.High volumes are attained through multi-cavity tooling. From design and tooling to production and quality engineering with in-depth technical and engineering expertise. Our business model is designed to meet the portfolio of parts that global OEMs will source in China. Our facility is growing rapidly, and adding new capabilities in a very short span of time. Please contact us to understand our current state of completion and new capabilities that we plan to add.

Minimum Order: 1 bags

All our Allmax brake pads are used premium quality materials with excellent performance in high temperature and mixed of innovative, technology and quality. ALLMAX become the pioneer company of brake pad for commercial vehicles& construction machines in China. We have gained the trust of a huge clientele across the national as well as global market by providing them an excellent quality collection of products within the promised time. Our huge gamut of high quality products includes Commercial Vehicles Brake Pad, Construction Machinery Brake Pad. All these products are manufactured making use of superior quality raw materials that we purchased from very known, certified and highly authentic suppliers of the industry. All our products are superior, durable, and reliable, these are supplied on large scale and provided at cost effective price ranges.

Minimum Order: 10 long tons

Commercial Vehicle Brake Pad WVA 29087 Product Description ECE-R90 Certificate approved With warranty of 100000km-200000km OE supplier for 20 years Heat resistance of more than 600 degree centigrade Friendly to disc, no noise Produce own back plates to control quality step by step 20 days for one container to deliver

Minimum Order: 10 long tons

Rear Axle Drum Diameter: 419 mm Width: 177.3 mm Thickness 1: 22.44/18.12 mm Thickness 2: 21.78/13.14 mm Outer Length: 209/216 mm Inner Length: 189/195 mm Radius: 203 mm Number of holes: 12 FITTS FOR: ROCKWELL Package Bozhong box, Blister packing, OEM, Neutral packaging Customized: We provide free design packaging, which can be designed according to customers' requirements. One box: 4 pieces brake pad

Location: Rear Axle Height: 76.1 mm Inner Brake Drum Height: 67.1 mm Diameter: 344.5 mm Drum Diameter: 295 mm Center Diameter: 108 mm Pitch Circle Diameter: 139.7 mm Number Of Holes: 6 FITTS FOR:  TOYOTA HILUX VII Pickup (_N1_, _N2_, _N3_)  [2004-]

Location: Front Axle Diameter: 296 mm Brake Disc Thickness: 28 mm Minimum Thickness: 25 mm Centering Diameter: 62 mm Height: 49.3 mm Number of Holes: 5 Pitch Circle Diameter: 114.3 mm Solid or Vented: V FITTS FOR: LEXUS ES (_V4_)  [2006-2012] ES350 V6-3.5L D.I. (24V) QOHC 2GR-FE 2007-2010 Disc Brake for TOYOTAAURIS (_E15_)  [2006-2012] CAMRY Saloon (_V4_)  [2006-2014] PRIUS PLUS (_W4_)  [2011-] RAV 4 III (_A3_)  [2005-2013] RAV 4 IV (_A4_)  [2012-] Avalon V6-3.5L F/inj. (24V) DOHC 2GR-FE 2008 Avalon V6-3.5L F/inj. (24V) DOHC 2GR-FE 2010 Camry 4-2.4L F/inj. (16V) DOHC 2AZ-FE 2007 Camry 4-2.4L F/inj. (16V) DOHC 2AZ-FE 2007-2008 Camry 4-2.4L F/inj. (16V) DOHC 2AZ-FE 2008 Camry 4-2.4L F/inj. (16V) DOHC 2AZ-FE (E) 2009 Camry 4-2.5L F/inj. (16V) DOHC 2AR-FE 2010 Camry V6-3.5L F/inj. (24V) DOHC 2GR-FE 2007 Camry V6-3.5L F/inj. (24V) DOHC 2GR-FE 2007-2008 Camry V6-3.5L F/inj. (24V) DOHC 2GR-FE 2008-2009 Camry V6-3.5L F/inj. (24V) DOHC 2GR-FE 2010 Camry Hybrid 4-2.4L F/inj. (16V) DOHC 2AZ-FXE 2007-2010 TRUCK RAV4 4-2.4L F/inj. (16V) DOHC 2AZ-FE 2006-2008 TRUCK RAV4 4-2.5L F/inj. 2AR-FE (F) 2010 TRUCK RAV4 V6-3.5L F/inj. (24V) DOHC 2GR-FE 2006-2007 TRUCK RAV4 V6-3.5L F/inj. (24V) DOHC 2GR-FE 2008-2010

Location: Front Axle Diameter: 241 mm Brake Disc Thickness: 19 mm Minimum Thickness: 17 mm Centering Diameter: 62.2 mm Height: 47.8 mm Number Of Holes: 4 Pitch Circle Diameter: 100 mm Solid Or Vented: V Weight: 4.6 kg FITTS FOR: HYUNDAI GETZ (TB)  [2002-2010]

Location: Front Axle Brake System: SUM Width: 119.3 mm Height: 78 mm Thickness: 17.4 mm Marerial: 100% Asbestos-Free, low-metallic, Ceramic MOQ: 50-100 sets Bozhong Brake Pads FITTS FOR: LEXUS LX470 1998-2007TOYOTA LAND CRUISER (_J7_)  [1984-] LAND CRUISER 100 (_J1_)  [1998-2008] LAND CRUISER PRAD(_J15_)  [2009-] Land Cruiser 1998-2007 TOYOTA (FAW) LAND CRUISER 100 (_J10_)  [2003-2007] Toyota Oem Brake Pads Ceramic REF NO. TOYOTA 04465-60150 TOYOTA 04465-60151 TOYOTA 04465-60160 TOYOTA 04465-60170 TOYOTA 04465-60190 TOYOTA 04465-60240 TOYOTA 04465-60250 TOYOTA 04465-60340

Brake shoe refers to the accessory that is pushed outward by the action of the brake cam or push rod to suppress the brake drum and act as a brake. It is installed on the brake drum and is one of the key safety parts in the automobile braking system. The shape of the brake shoe is like a half-moon. When the brake is stepped on, the two half-moon-shaped brake shoes are spread out under the action of the brake wheel cylinder, supporting the brake shoe to rub against the inner wall of the brake drum to slow down or stop. The canvas brake shoe has strong power, no noise, and will not cause damage to other components. The body brake shoe is made of aluminum alloy that meets the Honda standard, ensuring that the Honda brake shoe is rust-proof, light and strong. OEM Honda Brake Shoes are one of the most frequently replaced parts on a vehicle. They help you slow down by putting pressure on the brake rotors. Below are our most popular original OEM Honda front brake pads. Buy more OEM Honda brakes. If you need help finding a set for your Honda, please contact us by phone, email or web chat! Yaolun brake shoes have long service life and high reliability. Their core feature is a very stable coefficient of friction. In this way, stable braking performance is maintained even at high speeds, in heavy rain or severe temperature fluctuations.

Original Automotive Brake Pad 43022-SM4-G00 23652 Product Description Yaolun Brake pads are the original equipment manufacturer (OEM) parts that came with your vehicle. When you choose genuine OEM parts, you can rely on the high quality and effectiveness of the product and brand without guessing whether the product will work with your vehicle. Protecting your investment is important, and choosing the right parts can be challenging. So stop risking your search and buy something that might work. Stick to what you know and choose the real Original Brake Pad. The function and mechanism of brake pads Brake pads are steel backing plates with friction material bonded to the surface facing the disc brake rotor. It transmits the pressure exerted on the brake pedal to the wheels and stops or slows down the movement of the vehicle. - OEM Brake pads The main component in the braking system - Brake pads hold the brake disc by friction - Optimum friction coefficient -Nature friendly, asbestos free friction material. - Sustained vehicle durability.

Top Quality Car Rear Front Drum Brake Shoes K2235 For Daihatsu Delta Toyota Product Description Brake shoes refer to the accessory that is pushed outward by the action of the brake cam or push rod to suppress the brake drum and act as a brake. It is installed on the brake drum and is one of the key safety parts in the automobile braking system. The shape of the brake shoe is like a half-moon. When the brake is stepped on, the two half-moon-shaped brake shoes are spread out under the action of the brake wheel cylinder, supporting the brake shoe to rub against the inner wall of the brake drum to slow down or stop. Regardless whether its wet conditions, high speed or extreme temperatures, the shortest braking distance must be achieved all the time even under extreme conditions. Quality brake shoes therefore must have excellent friction stability. Then aside from safety, wear and shearing resistance as well as comfort. The right choice of shoes prevents annoying noises and vibrations. Features and Benefits: NAO formulation Excellent fade recovery Excellent braking efficiency under any extreme condition Very good wear with long working life Very good pedal feeling Friendly to the disc rotor Low dusting formulation OE specific assembly processes Premium Hardware