Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Ceramic Capacitors


Home > Offers to Sell > Electronics & Electrical > Passive Components > Ceramic Capacitors

Browse leads by category:
  Ceramic Capacitors  
    
    
    
  

Summary of 3/28/24 19:19 GMT:>> Show Compact View
10/24/23 6:28 GMT
OXYGEN LANCE MANIPULATOR

The carbon oxygen lance mainly refers to the EAF smelting, generally referring to the carbon oxygen lance at the EAF furnace door, as well as the furnace wall carbon oxygen burners also called KT lance. The furnace door carbon oxygen manipulator is equipped with two water-cooled nozzles, some with two water- cooled oxygen lances, and some with combination oxygen lance. The former consists of two oxygen lances arranged around, one is a Laval supersonic oxygen lance and the other is a carbon lance used for direct hole carbon powder spraying; The latter is equipped with two spray lance arranged above and below the overall lance, with a supersonic oxygen lance below, which is also a Laval nozzle, and a carbon lance above. ADVANTAGES OXYGEN LANCE MANIPULATOR ADVANTAGES oxygen lance manipulator Advantages During smelting, the spray lance inside the furnace door gradually inserts into the furnace as the scrap steel melts. Compared with traditional smelting processes, the use of EAF carbon oxygen lance has the following advantages: The furnace door carbon oxygen lance injects oxygen into the molten pool at Mach 2 supersonic speed, which changes the Chemical equilibrium in the molten pool and greatly increases the amount of CO in the molten pool. The whole process of foam slag smelting, due to the participation of carbon injection, the conditions for the whole process of foam slag smelting are improved, the splash is reduced, the power utilization rate is increased, the noise is reduced, and the quality is improved; As the temperature of the flue gas increases, sufficient oxygen reacts with carbon. Compared with traditional systems, free oxygen is used for CO combustion during decarbonization, resulting in a weaker oxidizing atmosphere in the furnace, reducing electrode and refractory consumption. WHY WHY SUCH LANCE SYSTEM IS NEEDED? Carbon removal. Promotion reduction reaction. Slag forming. Horizontal stirring of liquid bath. Remote control. Optimal height (up and down) adjustment for different process stages. Increase of oxygen efficiency and productivity. Increase of chemical reaction to speed up liquid melting down. For more information about different types of furnaces used in metallurgy, please feel free to contact us!

Contact:
Phone:
Fax:
Email:
chnzb
JustinKzao.zbmetaltech@gmail.c

Send Inquiry
CHNZBTECH Co.,Ltd.
25th Floor, Silk Road Center, International Port Area, Baqiao District, XI'AN.
XI'AN 710005
China
10/24/23 6:24 GMT
LADLE FURNACE ROOFING

LF roofing is round-shaped and has a tube-type water-cooled structure. It is divided into a large furnace roof, a small ramming roof, an offgas exhaust hood, and is provided with an operation door and an alloy addition orifice. CHARACTERISTICS LF ROOFING CHARACTERISTICS Water-cooled furnace exhaust roof have the following characteristics: 1. Minimize contact between air and molten steel in the atmospheric environment 2.Hanging slag or cold steel on the edge of the ladle does not affect the performance of the furnace. DESCRIPTIONS LADLE FURNACE ROOFING DESCRIPTIONS A furnace exhaust on roof for a metallurgical ladle/furnace (L.A.F) comprising a self-supporting structure of metallic pipework defining at least one flow circuit for cooling water, with a lower end having a circular peripheral flange (A), with a cylindrical body member of smaller diameter than the flange (A) located above the flange (A) (in use away from the ladle/furnace), and is provided with an end wall having a plurality of apertures each to receive, in a gas-tight manner, a carbon electrode, and an aperture for fume extraction provided in the arcuate wall of the cylindrical body member. For more information about steel furnace for sale, please feel free to contact us!

Contact:
Phone:
Fax:
Email:
chnzb
JustinKzao.zbmetaltech@gmail.c

Send Inquiry
CHNZBTECH Co.,Ltd.
25th Floor, Silk Road Center, International Port Area, Baqiao District, XI'AN.
XI'AN 710005
China
10/23/23 4:02 GMT
26650 Lithium Battery

26650 lithium battery are a type of cylindrical cell battery that is larger than the 18650 lithium battery and smaller than the prismatic lithium battery. The 26650 battery wholesale has a diameter of 26mm and a length of 65mm, making it a popular choice for energy storage applications that require a larger form factor. CHAM is a company that specializes in the production of 26650 lithium batteries. We offer 26650 battery bulk with a higher energy density, longer life cycle, and improved safety features compared to other traditional battery technologies. Our 26650 lithium batteries are ideal for use in electric vehicles, renewable energy storage systems, and consumer electronics. Datasheet Model Capacity (mAh) Voltage (V) Impedance (mΩ) Max. Continuous Dis. Current Cycle Life Discharge Operating Temperature (℃) NCM26650 5000 3.6 ≤20 3C ≥1500 -20~60℃ LFMP26700 5000 3.7 V ≤13 2C ≥3000 -20~60℃ There are many 26650 battery suppliers, but we are one of the best choices for you. If you are looking for a reliable lithium batteries factory, don't hesitate to contact us!

Contact:
Phone:
Fax:
Email:
chamglobal
86 0769-23836666
86 0769-23836666
Send Inquiry
DongGuan Cham Battery Technology Co.,LTD
No.9, GongYe West No.3 road,Songshan Lake,DongGuan,523808
DongGuan 523808
China
7/5/23 5:00 GMT
Lead High Voltage Ceramic Capacitors

Specification Model: CD90ZU2GA222MYGKA Cap=2200pF Features: 1. Compliant with IEC and the safety standards of various countries. 2. This ceramic capacitor meets reinforced insulation's Safety Standards. 3. Since it is rated at a withstand voltage of AC.4000V, it can be used in single-unit configurations within European Class II devices. 4. Flame-resistant reinforced outer insulation prevents fires, electrical shock, and other potential hazards. 5. Compatible with halogen-free external resin coating. MU-HUA is a leading capacitor manufacturer, established in 2007, makes efforts in research and development of aluminum capacitor and high voltage super capacitor. Capacitors are energy-storing devices available in many sizes and shapes. They consist of two plates of conducting material (usually a thin metal) sand wiched between an insulator made of ceramic, film, glass or other materials.

Contact:
Phone:
Fax:
Email:
Pom Pom
886-2-82216659
886-2-82216615
Send Inquiry
Mu-Hua Component Co., Ltd.
2F.-6, No.515, Zhongzheng Rd., Zhonghe Dist.,
New Taipei City Taiwan
Taiwan
4/11/23 1:25 GMT
Rotary Shear Valves

Keyto multi-channel rotary shear valve can be categorized into long lifetime model and regular model according to the service life. For long lifetime models, medium materials in contact with the fluid include PCTFE valve head, ceramic stator, and sapphire rotor. For the regular model, the medium materials in contact with the fluid include PCTFE valve head, PEEK stator, and PTFE rotor. Both the stator and rotor are corrosion-resistant and wear-resistant. If you have any special reagent tolerance requirements, please feel free to contact us. Keyto supports customized material. Types of Rotary Shear Valves Multi-channel Rotary Shear Valve 31XX Keyto multi-channel rotary shear valve can be categorized into extended lifetime model and regular model according to the service life. For long- lifetime models, medium materials in contact with the fluid include the PCTFE valve head, ceramic stator, and sapphire rotor. Characteristics of Rotary Shear Valves 01 Rocker solenoid has an integrated drive controller which controls the operation of the stepper motor by accepting commands from the host computer. This enables the switching of the fluid path. Three serial protocols are available: RS232/RS485/CAN bus. 02 The rotor is made of sapphire, which is suitable for various corrosive liquids. Valve head is made of PCTFE, which is maintenance-free. 03 A compact structure facilitates reducing the reagent residue inside the flow channel. Functions & Applications of Rotary Shear Valves The functions and applications of rotary shear valves are as follows: Keyto rotary shear valve is a new type used in the hydraulic field, especially in connection with a multi-channel rotary cutting valve and a hydraulic system. The utility model can reduce the diameter of the valve body and the volume of the rotary shear valve under the same working conditions. During its operation, the drive device drives the adapter shaft to rotate, and the valve element assembly rotates to make the second liquid inlet channel align with the liquid inlet through the hole on the valve body so that external liquid can enter the valve head. The liquid inlet through-hole on the valve body is arranged in several rows along the radial direction of the valve body, which makes efficient use of the space of the valve body. Under the same working conditions, the diameter of the valve body is effectively reduced, and the volume of the rotary cut valve is reduced. We can also offer kinds of proportional solenoid valve for sale, if you have needs, please contact us.

Contact:
Phone:
Fax:
Email:
keyto
86 0755-29516669
86 0755-29355015
Send Inquiry
SHENZHEN KEYTO FLUID CONTROL CO., LTD.
Yuandong East Road, Xinhe Community, Fuhai Street, Baoan District, Shenzhen, China
Shenzhen 518108
China
1/11/23 5:59 GMT
Gas Valve

Gas valve used in conjunction with Gas appliances, Caravan, Boat and Leisure housing as well as professional installations. Like manual change over valves, ball valve, and needle valve, etc. Different types of gas valves There're numerous types of valve for gas that IGT supplies, with different configurations and connection options. Ball Valve Needle Valve Changover Valve Buy from gas valve manufacturer. How Does a Gas Valve Work? Manual change-over valves are used to service one gas cylinder while the other cylinder is stood by More cylinders on each side of the valve can be connected by the use of a manifold. The test point ball valve is used just after the LP regulator in Caravan, Boat, and Leisure house installations. The test point is used to conduct the EN1949- 150mbar gas leak test. Mandatory for EU markets Needle valves are used to adjust gas flows without reducing the gas pressure. (Pressure drop over valve and pipe must be considered) FAQS Gas Valve FAQs What is a gas valve? Gas valve used in conjunction with Gas appliances, Caravan, Boat and Leisure housing as well as professional installations. Like manual change over valves, ball valve, and needle valve, etc. What are the two main functions of a gas valve? 1. Switch function; 2.Connection function. How long will a gas valve last? It can last upto 5 years. Buy gas hose and regulator from IGT.

Contact:
Phone:
Fax:
Email:
igtchina
86 0574-62502121
86 0574-62502127
Send Inquiry
Ningbo Shuai Xian Regulator Co., Ltd
No.566 Jinshan Road, Zone C, Investment Centre Jiangbei District, Ningbo City, Zhejiang, P.R.C.
Ningbo 315100
China
1/10/23 7:31 GMT
Glow Plug Heater Element Removal Set 8/ 10mm Electrodes Drilling Tapping

Bruide B-3065 glow heater plug removal tool is designed for removing the heater element efficiently without to remove the cylinder head. The thread is tapped by drilling a hole in the broken component so that it can be extracted with the provided glow plug adapter. Scope of Delivery of B-3065 Glow Plug Removal Tool Seven drilling tapping guides Five glow plug extraction adaptors with either a M8 or M10 thread. We can offer kinds of automotive tools for sale, if you have needs, please contact us.

Contact:
Phone:
Fax:
Email:
bruide
+86-18746332238

Send Inquiry
WENZHOU BRIDER PRECISION METAL CO.,LTD
No. 25, Shenwan Rd, Lucheng District Light Industrial Park, Wenzhou, China
Wenzhou 310018
China
1/6/23 6:11 GMT
Pinch Valves

Pinch Valve is made up of two parts: the upper side is the body, and the lower side is the connection that can hold the pipe. Keyto pinch valve has three series. The mainly different is the port size. The port size means the pipe diameter you want to use. In addition to port size, we have many functions to choose from. like single port or dual port, and different installations and different voltages to meet your unique needs. Types of Pinch Valves Pinch Valve 1213 Double Channel Pinch Valve, the medium only resists in the tube and little cross contamination, tube size recommend: 1.5mm*3mm/1.6mm*3.2mm. Pinch Valve 1224 Single Channel Pinch Valve, the medium only resists in the tube and little cross contamination, tube size recommend: 2mm*4mm. Pinch Valve 1269 Single Channel Pinch Valve, the medium only resists in the tube and little cross contamination, tube size recommend: 6mm*9mm. Advantages of Pinch Valves 01 Hose easily cleaned, ideally for testing impurity sample, waste discharge 02 Suitable for inspecting samples contain impurities / particles or not 03 Applications in occasion which need to avoid cross contamination between samples What is a Pinch Valve Used for? Keytos' pinch valve uses are as follows: Keyto mainly offers the series 1224, 1213 and 1269 pinch valves. The pinch valves are typically used in applications such as the discharge of samples containing impurities (especially flocculent impurities) or particles, the pre- treatment of water samples, electrolyte instrumentation, and the pharmaceutical industry. The 1269 series of pinch valves are mainly used in the environmental industry. FAQs of Pinch Valves  Can a pinch valve regulate flow? The pinch valve cannot be used to regulate flow because it is only available in two states, fully open or fully close, and the degree of opening cannot be adjusted at will.  How doe s a pinch valve stop flow? Two types of solenoid pinch valve are available: N.C. and N.O. Normally open valve(N.O.): the solenoid is powered to drive the pressure plate action, then the pressure plate clamps hose tightly, so as to stop the flow. Normally open valve(N.C.): the initial state of a normally close valve is that of a stop-flow, and the stop-flow principle is the same as that of a normally open valve. The difference is that normally open valve stops flow when powered on and normally closed valve stops flow when powered off. What are the components of pinch valve? Main components of the pinch solenoid valve: solenoid, valve body, spring, moving iron core, hose pressure plate, mounting plate.

Contact:
Phone:
Fax:
Email:
keyto
86 0755-29516669
86 0755-29355015
Send Inquiry
SHENZHEN KEYTO FLUID CONTROL CO., LTD.
Yuandong East Road, Xinhe Community, Fuhai Street, Baoan District, Shenzhen, China
Shenzhen 518108
China
10/26/22 2:52 GMT
Aluminium Oxide Paint Striper Disc With Shank (AO)

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminium Oxide Paint Stripping Disc for Angle Grinder with Shank (AO) Grit Size Table Corresponding To Raw Materials Aluminium Oxide Paint Striper Disc with Shank (AO) Paint Striper Disc with Shank Size Table Aluminium Oxide Paint Striper Disc with Shank (AO) Specification: Max. RPM: 7000~10000 RPM Outer Diameter: 100mm/115mm/125mm/150mm/180mm Center Hole Diameter: 16mm/22mm Other Raw Materials: Silicon Carbide (SC) Aluminium Oxide Paint Striper Disc with Shank (AO) Materials that can be worked: Aluminium Cobalt-based alloys Other non-ferrous metals High-temperature-resistant materials Nickel-based alloys (e. g. Inconel and Hastelloy) Bronze Hard non-ferrous metal Titanium Titanium alloys Copper Soft non-ferrous metal Brass Zinc Stainless steel (INOX) Grey/nodular cast iron (GG/GJL, GGG/GJS) Annealed cast iron Thermoplastics Elastomers Fibre-reinforced duroplastics (GRP, CRP) Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC) Steel, cast steel Aluminium Oxide Paint Striper Disc with Shank (AO) Applicable Industries Applications Surface work Roughening Cleaning Alum , inium Oxide Paint Striper Disc with Shank (AO) Applicable Industries Safety Warning of Aluminium Oxide Paint Striper Disc With Shank (AO) Instructions: Safety Warning of Aluminium Oxide Paint Striper Disc With Shank (AO) Please try to choose an operation indoor environment and wear protective guards and goggles. Never exceed the recommended maximum permitted rotational speed for safety reasons. In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels. Safety Warning: The clamping length between shank and grinders should be more than 15mm. Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. Keying abrasives is a family-owned company established in 1997, the business is expending to more than 15 countries, focus on abrasive tools, custom abrasives materials and service grinding and polishing industrials. If you want to know more kinds of spindle flap wheel, please visit our website.

Contact:
Phone:
Fax:
Email:
keying
+86(0)576 86711667

Send Inquiry
Keying Abrasives
No. 7 Songshan Road, Wenxi Industrial District, Wenling City, Zhejiang Province, China
Wenling 317527
China
10/26/22 2:47 GMT
FINE POLISHING AND FINISHING

Fine polishing is the process of generating a reflective surface. Typically, polishes are created by using micron or sub-micron abrasive particles in combination with a liquid. Polishing is a "wet" process. The polishing process usually uses a pad to hold the abrasive, so polishing may not be a "loose abrasive process". The material removed during polishing is very small, usually measured in microns. The surface finish of the workpiece to be polished must be of high quality prior to polishing, so pre-polishing is often a "grinding" surface. Types Of Fine Polishing and Fine Finishing Mounted Flap Wheels Micro-Mini Unmounted Flap Wheel Non-woven Flap Wheel (Full) Non-woven Flap Disc (Full) Wool Polishing and Finishing Sandpaper Disc Flap Wheel (Slashed) Spiral Band Features Of Fine Cut Polishing Compound and Finishing Polishing Purpose: fine grinding and polishing; during this processing, usally the depth of the whole metalmorphic layer is abut 3 μm and less. Abrasive materials: fine abrasive particles and materials that make the abrasive particles have a very fine effect on the workpiece; Machining Fluid: Provides abrasive, chip removal, cooling and unnecessary friction reduction effects Applications Of Fine Polishing and Finishing 1 Ideal for surface preparation and structuring of large stainless steel surfaces, an attractive finish as well as in the preparation of surfaces for polishing. 2 Blend and repair of turbine blades in engine construction. 3 Fine sanding in tool and mould-making. 4 Finishing hard-to-reach and small areas in container and apparatus construction. As a professional abrasive products company, we have kinds of abrasive flap wheel for sale, if you have needs, please contact us.

Contact:
Phone:
Fax:
Email:
keying
+86(0)576 86711667

Send Inquiry
Keying Abrasives
No. 7 Songshan Road, Wenxi Industrial District, Wenling City, Zhejiang Province, China
Wenling 317527
China
10/7/22 6:53 GMT
In-Ground Traffic Light

Sinowatcher is dedicated to save energy worldwide and thus save costs by offering a series of energy-saving and efficient LED traffic lights and road saftety products with first-rate quality yet affordable prices.We also provide racing traffic light, crossing traffic lights, bike traffic signal, stop go light, traffic control signals, pedestrian safety lights, city traffic solutions, traffic control solutions, road safety traffic lights, led traffic signal lights and pedestrian crossing studs. Features and Advantages Easy installation to link with the existing traffic control system Suitable to all intelligent traffic systems IP67 certification, resistant to dustproof, waterproof and durable Impact resistant of traffic light on ground Ground traffic light dimming function according to external lighting environment Automatic synchronization with pedestrian modules without any delay Low energy consumption Fully operational in harsh environments and industrial areas Specifications Input Voltage 100- 240AC /0.6A (50 /60Hz) Power Cons ≤6.5 W Dimming Mode Photo-sensitive dimming IP Grade IP67 Housing Mat. Top Tempered glass / Stainless steel frame Carton Size 1080mmx295mmx140mm Operating Voltage 24VDC /1A Viewing Angle 120° SMT LED with Optical Lens R:54pcs G:54pcs Size 1000x70x60mm Weight 5KGS Temperature Range -40°C~+ 80°C

Minimum Order: 5000

Contact:
Phone:
Fax:
Email:
trafficsolution
+86-755-29194843
+86-755-29440797
Send Inquiry
Sinowatcher Technology Co., Ltd.
2nd Building (3rd & 4th floor), 305 Nanhuan Road, Ma An Shan Community, Shajing Town, BaoAn Distric
Shenzhen 518104
China
6/15/22 3:13 GMT
PAGOODA Manufactures Solid Capacitors

Introduction of PAGOODA solid electrolytic capacitors: Operating temperature range: -55~+105℃ for 2000 hours. Rated voltage range: 10V~100VDC. Nominal capacitance range: 18μF~2700uF Suitable for motherboard, VGA, DC/DC converter, switching power supply, QC protocol mobile phone charger, PD protocol charger. Meet RoHS requirements. Solid electrolytic capacitors can make larger capacity with smaller volume, Higher stability, longer life, lower ESR and high rated ripple current. Solid electrolytic capacitors can continue to work stably in high temperature environments, and the use of solid aluminum electrolytic capacitors can directly improve the performance of the motherboard. At the same time, due to its stable impedance in a wide temperature range, it is suitable for power supply filtering. It can effectively provide stable and abundant power, which is especially important in overclocking. WeChat: pskj13622678159 whatsapp: +86 13794963328 Alibaba International Station: https://mlccpagooda.en.alibaba.com/minisiteent , rance.html? spm=a2700.details.cordpanyb.2.766f6 , 411xYsc5I&from=detail&productId=1600474189 915

Minimum Order: 4000

Contact:
Phone:
Fax:
Email:
WenYin WANG
+86 13622673179
+86 0769-82308239
Send Inquiry
Dongguan Pingshang Electronic Technology Co., Ltd.
No. 14, Chuangye 1st Road, Helu Village, Baoshan Community, Huangjiang Town
DONGGUAN 523750
China
5/31/22 9:06 GMT
SMD magnetic beads 0805 2500R 300MA

SMD magnetic beads 0805 2500R 300MA Application:Filtering Type: induction magnetic beads Brand/Trademark: PAGOODA Model/Spec: 0805 2500R 300MA Package form: Winding form: non-wire wound Magnetic properties: ferrite core Working frequency: low frequency Installation method: vertical sealing frame Material: Ceramic Features: 1. Internal silver printing layer and magnetic shielding structure to minimize crosstalk; 2. It can suppress electromagnetic interference in a wide frequency range (from tens of MHz to hundreds of MHz); 3. Three materials with a wide range of impedance values, suitable for various applications; 4. High solderability and thermal sensitivity, high reliability and wide filtering frequency; 5. Noise suppression of electrical equipment and peripheral equipment such as low-speed signal computers, cameras, LCD TVs, communication equipment, office equipment, etc. PAGOODA, a chip electronic component manufacturer from China, has a professional sales team and electronic technicians, providing original technical support and selection solutions. We also have some other manufacturers, and we can customize what other manufacturers do not have! Buy SMD Electronic components, find PAGOODA, can be customized! For further communication, please add me Letter: pskj13622678159

Minimum Order: 4000

Contact:
Phone:
Fax:
Email:
WenYin WANG
+86 13622673179
+86 0769-82308239
Send Inquiry
Dongguan Pingshang Electronic Technology Co., Ltd.
No. 14, Chuangye 1st Road, Helu Village, Baoshan Community, Huangjiang Town
DONGGUAN 523750
China
5/25/22 9:07 GMT
SMD transistor TFZ591 SOT223

SMD transistor TFZ591 SOT223 Model/Specification: TFZ591 Brand/Trademark: PAGOODA Package form: SOT-223 Environmental category: lead-free environmental protection Installation method: patch type Packing method: tape and tape packaging Power characteristics: low power frequency Features: IF Polarity: PNP type Our chip triode products are mainly used in: 1. Power Products 2. Lighting equipment 3. Automotive Electronics 4. Medical Equipment 5. Intelligent products 6. Network communication equipment 7. Instrumentation A chip triode is a semiconductor device with two PN junctions, named because it has three electrode leads. SMD electronic components supplier - PingShang Technology specializes in supplying SMD triode products with complete specifications. We must have what others have, and we can have what others do not! Can be customized production to meet your different needs!

Minimum Order: 4000

Contact:
Phone:
Fax:
Email:
WenYin WANG
+86 13622673179
+86 0769-82308239
Send Inquiry
Dongguan Pingshang Electronic Technology Co., Ltd.
No. 14, Chuangye 1st Road, Helu Village, Baoshan Community, Huangjiang Town
DONGGUAN 523750
China
5/17/22 7:31 GMT
PAGOODA super capacitor

PAGOODA super capacitor introduction Rated voltage: 2.7V, 30V, 36V, 3.8V, 5.0V, 5.5V 6.0 10.8V 135V 48.0V……. Regular volume: 0612, 0813, 1020, 1225, 1625, 1840 2245, 3050, 3569... Rated capacity (F): 104, 224, 334, 474, 504, 105, 155, 205305, 505705, 106, 206, 256 356 506308... Error: X=-10%~+30% V=-10%~+10% M=-20%~+20%, T=-20%~+80% The supercapacitor has a fast charging speed. It can reach more than 95% of its rated capacity after charging for 10 seconds to 10 minutes. Super high current discharge capacity, high energy conversion efficiency, small process loss, high current energy cycle efficiency ≥ 90%; high power density, up to 300W/KG~5000W/KG, equivalent to 5~10 times that of batteries; WeChat: pskj13622678159 whatsapp: +86 13794963328

Minimum Order: 4000

Contact:
Phone:
Fax:
Email:
WenYin WANG
+86 13622673179
+86 0769-82308239
Send Inquiry
Dongguan Pingshang Electronic Technology Co., Ltd.
No. 14, Chuangye 1st Road, Helu Village, Baoshan Community, Huangjiang Town
DONGGUAN 523750
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   1   |   2  |   3  |   4  |   5  |   6  |   7  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2024 IMEXBB.com. All rights reserved.

IMEXBB.com