Other Chemicals

The name of Product:Calcium Chloride 94%-97% prills Appearance:White particles, odorless, slightly bitter taste. Grain Size:1mm-3mm Turbidity:10 Packing: Two-layer,PP outside+PE inside,25kg/bag or 1000kg/bag or customized according to requirements Expiry date: 2 years Calcium Chloride 94%-97% Prills An anhydrous pellet form of Calcium Chloride (CaCl2). It is the most widely used and most effective of all cement accelerators. Normally 1 to 3% calcium chloride based on the cement is used. In general calcium chloride is added to cement slurries to shorten the setting time and/or accelerate the hardening process. It can also be used to offset the delay caused by other additives such as dispersants, fluid loss additives and retarders. Synonyms: CaCl2; Calcium Chloride； Anhydrous Calcium Chloride; Calcium Chloride Anhydrous Granular; Molecular Formula:CaCl2 Appearance:White solid particles, odorless, slightly bitter in taste, highly hygroscopic and deliquescent. HS Code:282720 CAS NO.:10043-52-4 EINECS:233-140-8 Physical and Chemical Properties: Relative density:2.15(25℃） Melting point:772℃ Boling point:1600℃ Solubility:Easily soluble in water, releases a large amount of heat when dissolved. Highly susceptible to deliquescence when exposed to air. Easy to dissolve in water,with a solubility of 74g/100ml of water at 20℃，while releasing a large amount of heat (the enthalpy of dissolution of calcium chloride is -176.2 cal/g). Highly hygroscopic: easily deliquescent when exposed to air. The state of the product after being damp: The water absorption is small, and the external shape has not undergone significant changes, still in the form of blocks; After absorbing water again, the surface begins to become wet, cold, and loose, with a tendency to dissolve; Has a large water absorption capacity, transforms from wet and cold small pieces into liquid, and then completely dissolves in water. Chemical Stability:  ·Stable under normal temperature and pressure ·Avoid moisture, heat, and high temperatures Easy to dissolve in water, ethanol, and acetone. Highly hygroscopic, easily deliquescent when exposed to air. Easy to dissolve in water and release a large amount of heat, its aqueous solution is slightly acidic. Dissolve in alcohol, acetone, and acetic acid. Reacting with ammonia or ethanol, CaCL2 · 8NH3 and CaCL2 · 4C2H5OH complexes are formed, respectively. The precipitate that crystallizes from an aqueous solution at room temperature is usually hexahydrate. When gradually heated to 30 ℃, it dissolves in its own crystal water and gradually loses water upon further heating. At 200 ℃, it becomes dihydrate, and when heated again to 260 ℃, it becomes white porous anhydrous calcium chloride. Easy to absorb moisture. The solubility in 100g of water is 74.5g (20 ℃) and 159g (100 ℃). ·At room temperature, due to the crystallization of aqueous solutions, they often form hexahydrate salts. When heated to 30 ℃, it dissolves in its own crystal water and gradually loses water by further heating. At 200 ℃, it becomes a dihydrate salt, and when heated again to 260 ℃, it becomes white porous anhydrous calcium chloride. At this point, water reacts with anhydrous calcium chloride and also generates CaO. ·Contact with the skin can cause corrosion and blistering

The name of product:Calcium Chloride 74% Powder Appearance:white powder.non-toxic, odorless, slightly bitter in taste Mesh Size:80-100meshes // 200meshes Product Advantages:High content, fine powder, dissolve in water quickly, clear aqueous solution. Packaging specifications:25kg/bag or 1000kg/bag or customized,Double layered packaging,PP outside + PE inside. Expiry date: Two years Calcium Chloride 74% Powder Calcium Chloride Powder is a highly effective desiccant and de-icing agent. With a concentration of 74%, this white, crystalline powder is commonly used for moisture control, road safety (especially in winter for melting ice and snow), and industrial applications like dust control and concrete acceleration. Calcium Chloride 74% Powder is available in 25kg/bag, 1000kg/bag, or customized packaging, featuring double-layered protection with PP on the outside and PE on the inside to ensure optimal storage and transportation conditions. Appearance:white powder.non-toxic, odorless, slightly bitter in taste Type:Industry Grade Molecular weight:147.0146 EINECS:233-140-8 HS Code:282720 CAS No.:10035-04-8 Physical and Chemical Properties: Relative densit:1.835g/cm3 Melting point:772°C Boiling point:1935°C Highly hygroscopic: easily deliquescent when exposed to air. Solubility: It is easily soluble in water and releases a large amount of heat. Its aqueous solution is slightly alkaline. Dissolve in alcohol, acetone, and acetic acid.

The name of product:Calcium Chloride 74% Flakes Appearance:white or off-white flakes .non-toxic, odorless, slightly bitter in taste Product features:white flakes, less powder, clear aqueous solution, high content. Packaging method: Two-layer,PP outside + PE inside,25kg/bag or 1000kg/bag plastic woven bags or color film bags or customized according to requirements. Expiry date: 2 years Calcium Chloride 74% Flakes Appearance:white or off-white flakes .non-toxic, odorless, slightly bitter in taste Type:Industry Grade Pack: Calcium Chloride Flake 77% in 25kg/bag,1000kg/bag Molecular weight:147.0146 EINECS:233-140-8 HS Code:282720 CAS No.:10035-04-8 Contact us for the calcium chloride 77% flake best price now. Physical and Chemical Properties: Relative densit:1.835g/cm3 Melting point:772°C Boiling point:1935°C Highly hygroscopic: easily deliquescent when exposed to air. Solubility: It is easily soluble in water and releases a large amount of heat. Its aqueous solution is slightly alkaline. Dissolve in alcohol, acetone, and acetic acid. Reacting with ammonia or ethanol, CaCl2·8NH3 and CaCl2·4C2H5OH complexes are formed, respectively. At low temperatures, the solution crystallizes and precipitates into hexahydrate. As it gradually heats up to 30°C, it dissolves in its own crystal water and gradually loses water upon further heating. At 200°C, it becomes dihydrate, and when heated up to 260°C, it becomes white porous anhydrous calcium chloride. Other: Dihydrate calcium chloride is an ionic compound, and its aqueous solution is neutral or weakly alkaline. Under high temperature conditions, dihydrate calcium chloride can dehydrate to form anhydrous calcium chloride (CaCl2), which can be further decomposed into calcium oxide (CaO) and hydrogen chloride gas (HCl) upon heating.

We produce a range of chemicals, and powders for use in cleaning all types of banknotes and also have the CLS laser cleaning machine to deal with the worst cases of banknotes. Our products range from: Vectrol Paste TTZ Universal Solution Zuta S4 Castrox Oxide HQ45 SSD Solution SSD super Solution SSD Super Automatic Solution SSD PK58 Solution SSD Universal Solution SSD Master Solution SSD D2 Fuse Solution SSD Virus Termi Solution

Minimum Order: 5 dozens

Buy Potassium cyanide ( KCN ) pills and powder online best price Order Potassium cyanide ( KCN ) pills and powder online best price Supply Potassium cyanide ( KCN ) pills and powder online best price Purchase Potassium cyanide ( KCN ) pills and powder online best price Buy sucide pills online best price Order sucide pills online Supply sucide pills online Purchase sucide pills online Signal ID: olonchem01.43 For Quick and Painless Death (Euthanasia) Buy #Nembutal online Contact information; Email: olon958@gmail.com Or You can install the folowing apps and send me a text message Signal ID: olonchem01.43 Wire ID: @olon01

Minimum Order: 1 bags

Precision casting wax is widely used in the manufacture of metal parts that require high precision and complex structures, typical areas include: Aerospace: high-temperature alloy parts such as turbine blades and engine components. Medical devices: casting of surgical instruments, orthopedic implants (such as titanium alloy joints). Jewelry: production of fine patterned precious metal (gold, silver) jewelry. Automotive industry: precision gears, sensor components, exhaust system parts. Industrial machinery: pumps and valves, hydraulic parts, rapid prototyping of complex molds. Art casting: sculpture, handicrafts and other metal artwork with high detail requirements. Advantages of Precision Casting Wax High dimensional stability: very low shrinkage under temperature and humidity changes, maintains the precise shape of the mold and is suitable for manufacturing complex, high-precision parts. Excellent fluidity: after melting, it can fully fill the details of the mold and replicate fine patterns (e.g. turbine blades, jewelry patterns, etc.). Low ash residue: minimal ash residue after burning or dewaxing to avoid casting surface defects. Easy mold release: low adhesion to shell materials (e.g. ceramic shells), quick and complete melting out of the wax during dewaxing, reducing the risk of shell breakage. Reusability: Waste wax can be recycled and reused, reducing costs. Environmental protection and safety: Modern investment casting waxes are mostly formulated with non-toxic, low volatility synthetic waxes or natural waxes, which are in line with environmental standards.

Industrial grade petroleum jelly is a solid hydrocarbon based grease with good lubricity, chemical stability, water resistance and corrosion resistance, and has a wide range of uses, mainly including the following: Lubrication and friction reduction Lubrication of mechanical equipment: under the condition of temperature not higher than 45℃ and not much load, it can be used as the grease of light load machinery to reduce the friction and wear between mechanical parts. Lubrication of zipper and slide rule: it can effectively reduce the friction resistance of zipper and slide rule and make them slide more smoothly. Protection and anti-corrosion Metal antirust: It can be coated on the surface of metal products, metal parts and machinery to form a layer of protective film to prevent metal from rusting. For example, it is applied to corrosion-prone metal jewelry, non- stainless steel knives and gun barrels before storage. EQUIPMENT PROTECTION: Can be used in taps or equipment that require regular repair and maintenance, such as transmission lines, split tees installed for HOT TAP operation, or valves where polyurethane insulation is damaged or cannot be buried. Release and molding Mold Release Agent: Used as a release agent for plaster molds and castings, also used for die casting and mold release. Modeling Clay: Part of a hydrocarbon mixture used to make modeling clay that does not dry out like Play-Doh.

Micronized waxes have good lubricating properties and can reduce the friction of inks during the printing process, thus improving the abrasion and scratch resistance of inks. For example, in water-based inks, the wax powder can prevent printed materials from sticking to each other when stacking, especially in high temperature environment, this property is especially important. Micronized wax can be used as a matting agent to reduce the gloss of the ink by the distribution of its particles on the surface of the ink, so that the printed matter has a matte effect. Micronized wax can be evenly distributed in the ink to improve the smoothness and feel of the coating. At the same time, it can also enhance the dispersion of pigment, so that the pigment coloring strength is increased. In oil-based ink, micronized wax can form a wetting film on the ink surface, making the ink surface smoother, more even and flat.

Iron oxide, also known as iron oxide, Rao limonite, bumt ochre,Tiedan iron red, red powder, Venice red (mainly composed of iron oxide), etc. The chemical formula Fe2O3, soluble in hydrochloric acid, is a reddish brown powder. Its reddish brown powder is a low-grade pigment, which is called iron oxide red in industry. It is used in paint, ink, rubber and other industries. It can be used as catalyst, polishing agent for glass, gemstones and metals, and can be used as raw materials for ironmaking. COLORFUL UNFADING HIDING POWER STRONG HEAT&ALKALI ANTI-IRON OXIDE GREEN IRON OXIDE RED S190 IRON OXIDE BLACK IRON OXIDE RED S130 IRON OXIDE YELLOW ENVIRONMENTAL PROTECTION IRON OXIDE PIGMENT Product series ·  Cracking Agent ·  Clinker ·  Iron Oxide Pigment ·  Rock Drill ·  All kinds of drills ·  Mine Accessories https://www.zjlsanqiang.com/fe2o3-i , ron-oxide.html

PRODUCT PARAMETERS ACTION PRINCIPLE AND DOSAGE: Active expansive agent can react with cement slurry to produce gas, which can increase the apparent volume of cement and mortar. lt can be configured with shrinkage compensating concrete, self stress concrete, free expansion rate of0.02%~0.06%, self stress value of0.2~0.6MPa, compressive strength of 10%~30% and impermeability of2~3 times. This product is widely used in waterproof, expansive concrete, mortar and cement products in various industrial and civil buildings. It can make concrete expand to a certain volume and reduce the amount of cement in concrete and mortar. The dosage of this product is 2% ~ 4% of cement dosage.   Highly efficient expanded clinker PRODUCT APPLICATION Main uses: 1. Underground buildings such as underground parking lots, warehouses, tunnels, mines, air-defense sidewalks, machine-kang subways, etc. 2. Construction of large containers, granaries, oil tanks, cavems, etc. 3 Self-waterproof rigid waterproof roof mortar anti-seepage layer mortar moisture-proof layer.4 The anchoring of the prefabricated component frame structure joint, the grouting material of the prefabricated component, the post-tensioning the grouting material of the prefabricated component, and the refilling of the rock-based grouting material after the component. 5 Non-shrinkage pouring between the anchor screw base of the mechanical equipment and the concrete foundation. 6 The protective mortar for the inner lining ofsteel pipes and steel pipes. 7Cement products are manufactured from self-stressed prestressed and steel- sleeved prestressed concrete for water delivery pipes and reinforced concrete drainage pipes for floor slabs, beams and columns, waterproof roofs, etc. 8 Important buildings that require good crack resistance and perfect appearance, such as sports stands, museums, hotels, etc. 9 Highway pavement, bridge concrete surface culvert, etc. 10 Construct high-strength and impermeable shafts and fill the backfill grooves of the dam with concrete, etc. This product can be used in all concrete projects and cement products that require crack resistance and impermeability joint filling.   Product characteristics Low Dosage Low Alkali Doesn’T Affect The Early & Late Strength Doesn’T Increase The Drop Loss Of Concrete Field High Imperme- Ability Crack Resistance Waterproof   APPLICATION RANGE Basement Parking Basement Underground warehouse Ground Roof Tunnel Swimming Pool Water channel Pool This product can be used in basement, underground garage, underground warehouse, civil defense engineering, etc., as well as water storage projects such as water tower, pool, water channel, swimming pool, etc., as well as crack prevention and seepage prevention ofindoor and outdoor ground and road pavement and roof.

Stone cracking powder, is a cutting-edge demolition solution developed by Chinese scientific experts. This powdered inorganic material is crafted using special clinker burned at high temperatures in a rotary kiln, enhanced with a small amount of additives. High range soundless cracking agent HSCA is designed for the safe and efficient demolition of concrete buildings, as well as for mining and cutting hard stones like marble and granite. It is mixed with water to form a slurry, which, when poured into boreholes, enables silent and vibration-free crushing or cutting within 2-3 hours.   Stone Cracking Chemical Powder features • High Expansion Performance HSCA is a powerful inorganic material that expands significantly, providing the force needed to crack tough stones and concrete structures. • Noise-Free and Vibration-Free Our stone cracking powder operates silently, ensuring a peaceful working environment without the disturbance of noise or vibrations. • Controlled Fracturing The advanced formulation of rock breaking chemical allows for precise control over the fracturing process, enabling accurate shaping and manipulation of stones. • Environmentally Friendly Designed with sustainability in mind, rock splitting powder has minimal environmental impact, supporting eco-friendly demolition practices. • Versatility Non explosive stone cracking powder's applications span across various industries, including civil engineering, mining, and construction, making it a versatile tool for a wide range of projects. • Ease of Use Simple to prepare and apply, non explosive rock breaking chemical integrates seamlessly into any workflow with clear instructions for use. • Reliability Consistent quality ensures that expansive mortar cracking powder delivers exceptional results time after time, providing a dependable solution for stone and concrete cracking.   Sanqiang Rock breaking chemical advantage High-efficiency silent crushing agent is developed by China Building Materials Research Institute, It is a powdered inorganic material with high expansion performance. It is also the best tool for mining stones and demolishing buildings, and demolishing places where explosives are not suitable.

High-efficiency Silent Crushing Agent (HSCA) is a revolutionary product in the field of rock demolition. Developed by Chinese scientific experts, this innovative rock demolition chemical is crafted using specially burned clinker in a rotary kiln, combined with a small amount of additives. Soundless stone cracking powder stands out as an efficient and safe alternative to traditional demolition methods, offering a silent and vibration-free process that is both environmentally friendly and highly effective.   Rock demolition chemical features • Efficient Expansion Performance HSCA is a powdered inorganic material that boasts high expansion capabilities, making it an ideal tool for a variety of applications. • Safe and Silent Operation Unlike conventional explosives, HSCA rock cracking powder eliminates the need for permits, special training, and does not produce noise, vibrations, dust, or flying debris. • Non-Toxic and Environmentally Friendly This chemical rock splitting agent is non-toxic, ensuring the safety of workers and the surrounding environment during the demolition process.   Rock demolition chemical advantage High-efficiency silent crushing agent is developed by China Building Materials Research Institute, It is a powdered inorganic material with high expansion performance. It is also the best tool for mining stones and demolishing buildings, and demolishing places where explosives are not suitable. https://www.zjlsanqiang.com/

High-efficiency silent crushing agent is invented by Chinese scientific experts. Our company uses special clinker burned at high temperature in rotary kiln and a small amount of additives to make it. Concrete demolition powder is an efficient and safe crushing material used for safely demolishing concrete buildings and mining and cutting marble, granite, etc. HSCA is mixed with water into slurry and poured into rock or concrete boreholes. After 2-3 hours, it can be crushed or cut without vibration, noise, flying stones, or harmful gases. The high range soundless cracking agent has been widely used for many years and sold abroad in large quantities.   Concrete Demolition Powder Features • Ease of Use: Concrete demolition powder is incredibly user-friendly, requiring only a simple mix with water and pouring into pre-drilled holes. This straightforward application process makes it accessible for both professional demolition companies and private individuals. • Manufacturing Excellence: Sanqiang Building Material's commitment to quality is evident in the production process, with a 2.8 m * 50 m rotary kiln that produces high-quality calcium oxide clinker, ensuring the product meets the highest industry standards. • Versatility: The concrete breaking powder is suitable for a wide range of applications, including demolition in areas that are inaccessible to traditional methods, where blasting is prohibited, or where noise, heavy equipment, or vibrations are a concern. • Ecological Benefits: As an environmentally conscious option, concrete demolition powder is virtually noiseless and vibration-free, making it an ecologically friendly choice for demolition projects. • Packaging: Supplied in powder form and vacuum-packed in heavy-duty plastic bags, concrete cracking powder ensures that the product remains potent and ready for use. • Safety: Concrete cracking chemical is safe for use in various environments, both indoors and outdoors, and is effective in both dry and humid conditions.   Concrete crushing agent advantage High-efficiency silent crushing agent is developed by China Building Materials Research Institute, It is a powdered inorganic material with high expansion performance. It is also the best tool for mining stones and demolishing buildings, and demolishing places where explosives are not suitable.

As an important additive, micronized wax has an irreplaceable role in the field of ink coatings. It can significantly improve the surface properties of ink coatings, enhance scratch resistance, abrasion resistance, anti-adhesion, as well as improve the feel and control the gloss. In addition, the micronized wax can prevent pigment settling and cooperate with matte powder to produce matte paint. There is a wide range of micronized waxes, mainly including Fischer-Tropsch waxes, polyethylene waxes, polypropylene waxes, polytetrafluoroethylene waxes and modified micronized waxes. Among them, Fischer-Tropsch wax is a kind of unbranched linear wax with low melting point and excellent smoothness and dispersibility; polyethylene wax has excellent anti-friction, anti-scratch, anti-adhesion and light retention; polypropylene wax has higher softening point and hardness, and has outstanding anti-adhesion and abrasion resistance; polytetrafluoroethylene wax has a high melting point, high density, and has excellent comprehensive performance, but is difficult to be dispersed and has a higher price; and modified micronized wax combines many advantages by modifying other waxes through a specific process. Modified micronized waxes combine the advantages of other waxes through a specific process.