Chemicals & Plastics

THAIFOOD-N (Non Phosphate) is a mixture of food grade sodium/calcium salts and food materials in a ratio to provide excellent performance in seafood products. BENEFITS: Thaifood-N (Food Additive) 1.Increasing yield (moisture retainer). 2.Minimizing the freeze loss (Drip Loss/ Weight Loss after defrost/ thawing). 3.Improving texture 4. Balancing phosphate rate. Due to some countries such as European ones control the rate of phosphate, Thaifood- N helps in keeping the rate/percentage of phosphate in fish and shrimp products at acceptable level based on EU regulation. Packing: 25 kg/bag

Minimum Order: 10 long tons

Thaifood-B is non phosphate or bleaching agent which is a mixture of food grade sodium/calcium salts and food materials in a ratio to provide excellent performance in fish-fillet and other fish products BENEFITS: 1. Removing/bleaching bad matters on fish fillets. 2. Improving color and appearance of fish-fillet and other fish products 3. Allowing Thaifood-M or Thaifood-N absorbs into fish products effectively. Packing: 25kg/bag

Minimum Order: 10 long tons

N-Preserb is Sodium Benzoate substitute used for decrease acid & alkaline pH and control the growth of bacteria. Feature: Benzoic Acid FREE Non - side effects to the taste of products. Application: Acidic foods such as soy sauce,fish sauce,fruit and vegetable pickles, and etc. Packing: 20 kg/bag

Minimum Order: 500

Mixed Phosphate,a food grade polyphosphates and food materials in a ratio to provide excellent performance in mainly fish and shrimp. BENEFITS: Thaifood-M (Food Additive) 1.Increasing yield. 2.Minimizing the freeze loss (Drip Loss/ Weight Loss after defrost/thawing). 3.Improving texture appearance Packing: 25 kg/bag

Minimum Order: 10 long tons

Z-O Sweeteners Mixed Isomaltulose (Food Additive) It is the perfect sweetener or sugar replacer for food and beverages industry without compromising on the taste. It’s been developed with the aim to assist food and beverage factories saving cost of production effectively. Features: 1. Cost saving, 4 times sweeter than sugar. 2. Low GI (Glycemic Index); slow digestion & good absorption 3. Extracted from 100% natural sugar cane. 4. Control blood sugar level 5. Low calories 6. Reduce teeth decay and keep your teeth healthy Application: All kinds of food and beverage such as desserts, baked goods, cakes, biscuits, wafer, , syrup, tea, coffee, energy drinks, canned fruit juice, ice cream products, milk products, snacks, candy, jelly gum, and fillings. Direction: Put 10g of Z-O Sweeteners Mixed Isomaltulose into 200ml of normal room temperature. Stir it well.

Minimum Order: 1000

Description Mix Phosphate is a mixture of food grade polyphosphates and food materials in ratio to provide excellent performance in meat balls, bolonas and other meat products. Item Specification Appearance White powder/Granular P2O5 (% by weight) 50.0 min. pH (1% Solution) 8.2-9.2 Packing: 25kg/bag

Minimum Order: 1 bags

Product Description: It is non phosphate group food additive blended; suitable to be used for squid /Cuttlefish processing. This product is a mixture of food grade ingredients which conform to requirements of food chemical codex and JECFA standard. Product Application: For frozen Squid/Cuttlefish product. Product Benefits: Phosphate free. Increasing yield of product (Increasing weight gain after treated 12 – 15% (soaking)). Whitening for Cuttlefish/Squid product. Improve texture (Firmness). Extended shelf life.

Minimum Order: 10000

Liquid crystal mixture E7 (CAS# 63748-28-7) for R&D use PDLC liquid crystals with high temperature Liquid Crystal Mixture QYPDLC-N006 QYPDLC-2170 QYPDLC-HD010 QYPDLC- N2062 Lower Operating Temperature Tkn(C) -20 -30 -30 <-20 Upper Operating Temperature Tni(C) 147 140 150 140 Birefringence(589nm,20C) 0.191 0.24 0.28 0.187 Ordinary Refractive Index (No)(589nm,20C) 1.51 1.523 1.517 1.511 V90,020(V) 2.68 1.65 2.37 2.71 V10,0,20(V) 2.07 2.31 2.93 2.11 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

E7 Liquid crystal mixture CE4 69777-59-9 CE4 4-((2s)-2methylbutyl)phenyl 4-(hexyloxy)benzoate 69777-59-9 PDLC liquid crystals with high temperature Liquid Crystal Mixture QYPDLC-N006 QYPDLC-2170 QYPDLC-HD010 QYPDLC- N2062 Lower Operating Temperature Tkn(C) -20 -30 -30 <-20 Upper Operating Temperature Tni(C) 147 140 150 140 Birefringence(589nm,20C) 0.191 0.24 0.28 0.187 Ordinary Refractive Index (No)(589nm,20C) 1.51 1.523 1.517 1.511 V90,020(V) 2.68 1.65 2.37 2.71 V10,0,20(V) 2.07 2.31 2.93 2.11 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

Industrial grade petroleum jelly is a solid hydrocarbon based grease with good lubricity, chemical stability, water resistance and corrosion resistance, and has a wide range of uses, mainly including the following: Lubrication and friction reduction Lubrication of mechanical equipment: under the condition of temperature not higher than 45℃ and not much load, it can be used as the grease of light load machinery to reduce the friction and wear between mechanical parts. Lubrication of zipper and slide rule: it can effectively reduce the friction resistance of zipper and slide rule and make them slide more smoothly. Protection and anti-corrosion Metal antirust: It can be coated on the surface of metal products, metal parts and machinery to form a layer of protective film to prevent metal from rusting. For example, it is applied to corrosion-prone metal jewelry, non- stainless steel knives and gun barrels before storage. EQUIPMENT PROTECTION: Can be used in taps or equipment that require regular repair and maintenance, such as transmission lines, split tees installed for HOT TAP operation, or valves where polyurethane insulation is damaged or cannot be buried. Release and molding Mold Release Agent: Used as a release agent for plaster molds and castings, also used for die casting and mold release. Modeling Clay: Part of a hydrocarbon mixture used to make modeling clay that does not dry out like Play-Doh. Other Uses Rubber softeners and tackifiers: Can be used in the manufacture of rubber products to make rubber softer and increase its tackiness. Wood protection: can be used for finishing and protecting wood, such as mineral oil polishing. Cable Filling Paste: Used as raw material for industrial products such as cables to fill cables and prevent water from entering the cables. Emulsifying materials for explosives: can be used as emulsifying materials for the production of explosives. Anti-foaming and releasing agents: can be used as an anti-foaming agent to hinder the formation of foam in industrial process liquids, and as a releasing agent to prevent other materials from bonding to surfaces.

liquid crystal monomer 67284-56-4 G.C. 99.92% PDLC liquid crystals with high temperature Liquid Crystal Mixture QYPDLC-N006 QYPDLC-2170 QYPDLC-HD010 QYPDLC- N2062 Lower Operating Temperature Tkn(C) -20 -30 -30 <-20 Upper Operating Temperature Tni(C) 147 140 150 140 Birefringence(589nm,20C) 0.191 0.24 0.28 0.187 Ordinary Refractive Index (No)(589nm,20C) 1.51 1.523 1.517 1.511 V90,020(V) 2.68 1.65 2.37 2.71 V10,0,20(V) 2.07 2.31 2.93 2.11 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

liquid crystals high Birefringence refractive index QYPDLC-HD002-6 Nematic liquid crystal RM82 125248-71-7 1,4-BIS-[4-(6-ACRYLOYLOXYHEXYLOXY)BENZOYLOXY]- , 2-METHYLBENZENE C39H44O10 HPLC: 95% MIN. PDLC liquid crystals with high temperature Liquid Crystal Mixture QYPDLC-N006 QYPDLC-2170 QYPDLC-HD010 QYPDLC- N2062 Lower Operating Temperature Tkn(C) -20 -30 -30 <-20 Upper Operating Temperature Tni(C) 147 140 150 140 Birefringence(589nm,20C) 0.191 0.24 0.28 0.187 Ordinary Refractive Index (No)(589nm,20C) 1.51 1.523 1.517 1.511 V90,020(V) 2.68 1.65 2.37 2.71 V10,0,20(V) 2.07 2.31 2.93 2.11 Established in 2007, Qingdao QY Liquid Crystal Co., Ltd is a leading manufacturer specializing in high-quality nematic liquid crystals, primarily used in PDLC smart film and high grade of LC display. With over 18 years of nematic liquid crystals production expertise. Our LCs are widely exported to Europe, the United States, South Korea, and other global markets. The capable of our producing approximately 5000 kilograms per month. We signed the Exclusive Agency Agreement with our South Korean customer from 2011

Minimum Order: 20 square metres

Micronized waxes are used as internal and external lubricants to reduce friction between plastic particles and equipment and to improve the flow and processing properties of plastics. For example, in powder coating, adding 1%-5% of wax micronized wax can reduce screw torque by 10%-15%, reduce power consumption and increase production per unit time. Micronized wax can improve the surface gloss and abrasion resistance of plastic products and reduce surface defects during processing. For example, PTFE micronized wax can reduce the surface properties of the material and effectively improve the lubricity and wear resistance of the material. Micronized wax can also be used as a mold release agent to help plastic products release smoothly from the mold.

Dear Sir/Madam, (HS 392321) We would like to offer: Plastic Film Packaging. Consist of: garbage/trash bag, t-shirt bag, shopping bag, plastic bag with drawstring, plastic roll, poly bag, zip bag, etc.. Material: HDPE HMW (High Density Polyethylene High Molecular Weight), PP (Polypropylene), LDPE (Low Density Polyethylene) and LLDPE (Linear Low Density Polyethylene). Finished: embossed, colored or printed. Packing: sea-worthy export packaging. Product of Indonesia. For any interested parties, pls kindly contact for further details. Thank you.

Minimum Order: 1000