Chemicals & Plastics

CAS 301-10-0 Stannous octoate DABCO T-9 FASCAT 2001 TIB KAT 129 Stannous octoate CAS No.301-10-0 Chemical Name: Stannous octoate SynonymsTIN(II) 2-ETHYLHEXANOATE;TIN OCTOATE ;Stannous octanoate; STANNOUS 2- ETHYLHEXANOATE;tin bis(2-ethylhexanoate);TIB KAT 129; Tin dioctoate; Stannous Octoate T-9;Tin(Ⅱ) 2-ethylhexanoate;BIS(2-ETHYLHEXANOATE)TIN CBNum , ber:CB0308694 Molecular Formula:C16H30O4Sn Molecular Weight:405.12 MDL Number:MFCD00002676 Business and technology contact： sales@newtopchem.com Stannous octoate Properties Melting point <-20°C Boiling point >200°C Density 1.251 g/mL at 25 °C(lit.) vapor pressure 0.3Pa at 20℃ refractive index n20/D 1.493(lit.) Flash point >110°C pka 5.09[at 20 ℃] form liquid Specific Gravity 1.251 Viscosity 306mm2/s Water Solubility Miscible with water. Hydrolytic Sensitivity 7: reacts slowly with moisture/water Exposure limits ACGIH: TWA 0.1 mg/m3; STEL 0.2 mg/m3 (Skin) NIOSH: IDLH 25 mg/m3; TWA 0.1 mg/m3 InChI 1S/2C8H16O2.Sn/c2*1-3-5-6-7(4-2)8(9)10;/h2*7H,3-6H , 2,1-2H3, (H,9,10);/q;;+2/p-2 InChIKey KSBAEPSJVUENNK-UHFFFAOYSA-L SMILES CCCCC(CC)C(=O)O[SnH2]OC(=O)C(CC)CCCC LogP 2.64 at 25℃ UNSPSC Code 12161600 NACRES NA.22 SAFETY Signal word Danger Hazard statements H303-H316-H318-H361-H317-H411 Precautionary statements P501-P273-P272-P202-P261-P201-P280-P302+P352-P312- , P391-P362+P364-P333+P313-P305+P351+P338+P310-P , 405 PPE Eyeshields, Gloves, type ABEK (EN14387) respirator filter Hazard Codes Xi,Xn Risk Statements 36/37/38-62-52/53-43-41-63 Safety Statements 26-36/37/39-61 WGK Germany 1 RTECS MO7870000 TSCA TSCA listed PackingGroup III HS Code 29159000 Storage Class 6.1C - Combustible acute toxic Cat.3 toxic compounds or compounds which causing chronic effects Hazard Classifications Aquatic Chronic 3 Eye Dam. 1 Repr. 1B Skin Sens. 1 REACH Registrations Active Business and technology contact： sales@newtopchem.com

Minimum Order: 10 long tons

CAS 108-01-0 2-Dimethylaminoethanol Dabco DMEA Jeffcat DMEA 2-Dimethylaminoethanol CAS No.108-01-0 Chemical Name:2-Dimethylaminoethanol Synonyms DMAE;DMEA;DIMETHYLAMINOETHANOL;N,N- DIMETHY , LETHANOLAMINE;DIMETHYLETHANOLAMINE;DEANOL;2-(N,N-D , IMETHYLAMINO)ETHANOL;N,N- DIMETHYLAMINOETHANOL; , DMEOA;DIMETHYL MEA CBNumber:CB6256870 Molecular Formula:C4H11NO Molecular Weight:89.14 MDL Number:MFCD00002846 Business and technology contact： sales@newtopchem.com Brand Designation / Product Code Table Brand / Manufacturer Product Grade / Code Notes Dabco (Evonik / ex-Air Products) Dabco DMEA Industry standard naming Jeffcat (Huntsman) Jeffcat DMEA Direct product designation KAOLIZER (Kao Corporation) KAOLIZER No. 25 Kao's numeric amine designation (No. 10 is DMCHA, No. 25 is DMEA) Lupragen (BASF) Lupragen N101 BASF standard designation Polycat (Evonik) Polycat DMEA Direct commodity designation Tegoamin (Evonik) Tegoamin DMEA Evonik flexible/specialty foam catalyst line Toyocat (Tosoh) Toyocat-DMA (or Toyocat DMEA) Tosoh amine catalyst line FASCAT (PMC Organometallics) N/A (Not Applicable) FASCAT is exclusively reserved for organometallic catalysts (tin, bismuth, titanium, etc.), not pure tertiary amines like DMEA. U-CAT (San-Apro) U-CAT DMEA San-Apro organic amine series 2-Dimethylaminoethanol Properties Melting point −70 °C(lit.) Boiling point 134-136 °C(lit.) Density 0.886 g/mL at 20 °C(lit.) vapor density 3.03 (vs air) vapor pressure 100 mm Hg ( 55 °C) refractive index n20/D 1.4294(lit.) Flash point 105 °F storage temp. Store below +30°C. solubility alcohol: miscible(lit.) form Liquid pka pK1:9.26(+1) (25°C) color Clear colorless to pale yellow Odor Amine like PH Range 10.5 - 11.0 at 100 g/l at 20 °C PH 10.5-11 (100g/l, H2O, 20℃) explosive limit 1.4-12.2%(V) Water Solubility miscible FreezingPoint -59.0℃ Sensitive Hygroscopic Merck 14,2843 BRN 1209235 Henry's Law Constant 9.3×101 mol/(m3Pa) at 25℃, Nguyen (2013) Stability Stable. Flammable. Incompatible with oxidizing agents, copper, copper alloys, zinc, acids, galvanised iron. Hygroscopic. Cosmetics Ingredients Functions BUFFERING InChI 1S/C4H11NO/c1-5(2)3-4-6/h6H,3-4H2,1-2H3 InChIKe , y UEEJHVSXFDXPFK-UHFFFAOYSA-N SMILES CN(C)CCO LogP -0.55 at 23℃ Substances Added to Food (formerly EAFUS) DIMETHYLETHANOLAMINE FDA 21 CFR 173.20; 175.105; 175.300 2-Dimethylaminoethanol Chemical Properties,Uses,Production Description Dimet , hylaminoethanol is a colorless liquidwith a pungent odor. Odor threshold: 0.25 ppm. Molecularweight 5 89.16; Boiling point =133℃; Freezing/Meltingpoint=259℃; Flash point =41℃ (oc); Autoignitiontemperature 5=295℃. Explosive limits: LEL 5=1.6%;UEL 5=11.9%. Hazard Identification (based on NFPA-704M Rating System): Health 2, Flammability 2, Reactivity 0.Soluble in water. Chemical Properties colorless or slightly yellow liquid with ammonia odor. It is miscible with water, ethanol, benzene, ether and acetone. Uses dimethyl MEA (DMAE) is also known as dimethylaminoethanol. Studies indicate skin- firming properties, and an ability to reduce the appearance of fine lines and wrinkles as well as dark circles under the eyes. It is considered anti-aging, and antiinflammatory, and has exhibited free-radical scavenging activity. Uses 2-(Dimethylamino)ethanol is used as corrosion inhibitor, anti-scaling agent, paint additive, coating additive and solids separation agent. It is also used as an intermediate for active pharmaceutical ingredients and dyes. It serves as a curing agent for polyurethanes and epoxy resins. Further, it is used as an additive to boiler water. In addition to this, it is used therapeutically as a CNS stimulant. Uses 2-Dimethylaminoethanol (deanol, DMAE) may be employed as a ligand in the copper- catalyzed amination of aryl bromides and iodides. Preparation The synthesis of 2-Dimethylaminoethanol by the ethylene oxide method is obtained by the ammonification of dimethylamine with ethylene oxide, which is distilled, refined and dehydrated. Definition ChEBI: N,N-dimethylethanolamine is a tertiary amine that is ethanolamine having two N-methyl substituents. It has a role as a curing agent and a radical scavenger. It is a tertiary amine and a member of ethanolamines. Production Methods Synthesis of dimethylaminoethanol can be accomplished from equimolar amounts of ethylene oxide and dimethylamine (HSDB 1988). General Description A clear colorless liquid with a fishlike odor. Flash point 105°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used to make other chemicals. Air & Water Reactions Flammable. Partially soluble in water and less dense than water. Reactivity Profile DIMETHYLAMINOETHANOL is an aminoalcohol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. N,N-Dimethylethanolamine may react vigorously with oxidizing materials. Health Hazard Dimethylaminoethanol is classified as a mild skin irritant and a severe eye irritant (HSDB 1988). Doses as high as 1200 mg daily produce no serious side effects and a single dose of 2500 mg taken in a suicide attempt had no adverse effects (Gosselin et al 1976). Inhalation of the vapor or mist can cause irritation to the upper respiratory tract. Asthmatic symptoms have been reported. Extremely irritating; may cause permanent eye injury. Corrosive; will cause severe skin damage with burns and blistering. Ingestion may cause damage to the mucous membranes and gastrointestinal tract. No reports were found in the literature regarding carcinogenic or mutagenic potential. Business and technology contact： sales@newtopchem.com

Minimum Order: 10 long tons

Z-O Sweeteners Mixed Isomaltulose (Food Additive) It is the perfect sweetener or sugar replacer for food and beverages industry without compromising on the taste. It’s been developed with the aim to assist food and beverage factories saving cost of production effectively. Features: 1. Cost saving, 4 times sweeter than sugar. 2. Low GI (Glycemic Index); slow digestion & good absorption 3. Extracted from 100% natural sugar cane. 4. Control blood sugar level 5. Low calories 6. Reduce teeth decay and keep your teeth healthy Application: All kinds of food and beverage such as desserts, baked goods, cakes, biscuits, wafer, , syrup, tea, coffee, energy drinks, canned fruit juice, ice cream products, milk products, snacks, candy, jelly gum, and fillings. Direction: Put 10g of Z-O Sweeteners Mixed Isomaltulose into 200ml of normal room temperature. Stir it well.

Minimum Order: 1000

CAS 77-58-7 Dibutyltin dilaurate DABCO T-12 DBTDL Niax D-22 Kosmos 19 Dibutyltin dilaurate CAS No.77-58-7 Chemical Name:Dibutyltin dilaurate SynonymsDBTDL;dbtl;t12;tn12;davainex; , tinostat;butynorate;DIBUTYLTIN LAURATE;Dibutyltin dillaurate;DI-N-BUTYLDILAURYLTIN CBNumber:CB741 , 6378 Molecular Formula:C32H64O4Sn Storage Characteristics Treasury should be ventilated and low-temperature drying; and should transport separately with food materials. Extinguishing agent Carbon dioxide, sand, water, foam. Occupational standards TWA 0.1 mg (Sn)/cubic meter; STEL 0.2 mg (Sn)/cubic meter. Chemical Properties yellow liquid Uses PU catalyst, RTV silicone rubber Uses Stabilizer for polyvinyl chloride resins. Catalyst for curing certain silicones. Uses Di-n-butyltin dilaurate is used as a catalyst for the production of polyurethanes as well as for the transesterification reactions. It is involved in the vulcanization of silicones and a stabilizer in polyvinyl chloride (PVC). It acts as a rust inhibitor for polyurethanes, polyols, silicones and as a fuel additive. Uses Dibutyltin dilaurate has been used as a catalyst in a protocol for the covalent attachment of poly(ethylene glycol) (PEG) to silicon oxide to form a hydrophilic non-fouling surface. It can also be used as a catalyst in the preparation of polymers by reacting hydroxyl-terminated macromonomers and aliphatic diisocyanates. Business and technology contact： sales@newtopchem.com

Minimum Order: 10 long tons

Mixed Phosphate,a food grade polyphosphates and food materials in a ratio to provide excellent performance in mainly fish and shrimp. BENEFITS: Thaifood-M (Food Additive) 1.Increasing yield. 2.Minimizing the freeze loss (Drip Loss/ Weight Loss after defrost/thawing). 3.Improving texture appearance Packing: 25 kg/bag

Minimum Order: 10 long tons

We manufacture Licorice Extract Blocks. Colour: dark brown Glycyrrhizic acid: 8-10% (HPLC) Moisture: 13-14%

We manufacture Organic Licorice Extract Granules dust free. Appearance: black even size grains Glycyrrhizic acid: 7-9% (HPLC) Moisture: 5-10% Sizes: 0.2-1mm, 1mm-2.5mm

We manufacture Licorice Extract Powder Spray Dried. Glycyrrhizic acid: 8-10% (HPLC) Packaging: 25 composite bags

our Food-Grade PE Fresh-Keeping Film, the ultimate solution for effortless food preservation! Crafted from safe, high-quality materials, it boasts high transparency and moderate adhesion for easy wrapping. Perfect for keeping your food fresh and delicious at home—an essential addition to every kitchen. With the core of packaging needs in multiple fields such as "food / industry / daily necessities", a gradient product system with a thickness of 10μm-50μm is created: the food-grade version meets food safety standards, is sealed and oil-resistant, and can be suitable for packaging fresh food and dried goods; the industrial-grade version has excellent tensile properties and can be used for winding and bundling small goods; the color version can be customized for printing to meet the differentiated needs of brand packaging. The width can be customized as needed, realizing an efficient packaging solution of "one film for multiple uses". Core Features Thickness ranging from 10μm to 50μm, food-grade version is sealed and oil- resistant, suitable for fresh and dry food packaging.Industrial-grade version has excellent tensile performance for wrapping and bundling small goods.Colorful versions can be customized with printing, and width can be tailored to meet multi-scenario packaging needs of food, industry, and brands. Specifications Material Eco-Friendly Polyethylene (PE) Thickness 0.008-0.012mm (customizable) Width 200-400mm (customizable) Stickiness ≥70g/25mm Packaging Rolled (with cutter)

PE Square Bottom Bag is made from polyethylene. It features a square bottom design, strong load-bearing capacity, easy standing, and good sealing performance. It is an excellent choice for food packaging, industrial product storage, and home storage, and can be customized in size and thickness according to requirements. The food-grade version has excellent moisture-proof and sealing performance, and can store grains such as rice and flour for a long time; the chemical-grade version is resistant to chemical corrosion and can package materials such as chemical fertilizers and feed that are easy to get wet and scatter, making it a "stable protective container" in the heavy packaging field. Core Features Thickened and tear-resistant base material, thickness ranging from 20μm to 60μm, capable of withstanding the weight of raw materials and transportation pulling.Square bottom design improves stacking stability, facilitating storage and transportation.Food-grade version is moisture-proof and sealed for long- term grain storage; chemical-grade version is chemical corrosion resistant for packaging fertilizers, feeds, and other materials. Specifications Material High-Strength Polyethylene (PE) Thickness 0.15-0.40mm (customizable) Load-Bearing ≥80kg (customized by thickness) Size Width 400-1200mm, Height 500-1800mm (customizable) Packaging Bagged (packed)

BOPP Printed Tape uses biaxially oriented polypropylene as the base material. It features high adhesion, wear and weather resistance, and clear printing. It is an excellent choice for brand packaging identification and logistics transportation marking, and can be customized with patterns and text. Core Features Customizable color printing and brand logos, with a thickness of 20μm-45μm, featuring clear printing, wear resistance, and non-fading performance.Combines carton sealing and bonding functions with brand communication value, conveying product instructions or warning signs during logistics.Facilitates enterprise sorting and consumer identification, balancing practicality and brand exposure. Specifications Material BOPP Thickness 0.045-0.06mm (customizable) Width 48-72mm (customizable) Adhesion ≥18N/25mm Packaging Rolled (with paper core)

Color-Coded PE Stretch Film for Cargo Identification & Pallet Wrapping is a colored packaging film made of polyethylene as the main raw material through special processes. It has both packaging and fixing functions as well as visual identification function, and is widely used in logistics, warehousing, trade and other fields. Made of color-coded PE material, it is designed for cargo identification and pallet wrapping. It enables quick cargo category distinction via colors, tightly wraps and secures pallet cargo to prevent shifting and abrasion, improving logistics identification efficiency and cargo safety. Core Features Multiple color options including red, yellow, blue, and green, thickness ranging from 20μm to 40μm, with both tensile, fastening, and moisture-proof properties.Colors distinguish cargo categories, transportation areas, or brand series to improve logistics sorting efficiency.Can be printed with brand logos, forming mobile brand display during transportation and storage to enhance recognition. Specifications   Materi , al Colorful Polyethylene (PE) Thickness 0.02-0.06mm (customizable) Viscosity Medium adhesion (holding power ≥20h) Width 500-1200mm (customizable, multi-color options) Packaging Rolled, 300-1000m/roll (customizable)

Glass PE Protective Film, made of high-transparency and strong-adhesion PE material, has excellent scratch-resistant performance. It can effectively protect the glass surface from damage during processing, transportation and installation. Different from ordinary protective films, it has better light transmittance and more firm adhesion Window Protection During Construction is a specialized type of Glass Protective Film designed to act as a “safety and preservation shield” for glass windows and panels throughout the demanding construction and installation phase. It goes beyond simple surface coverage by integrating a grid-patterned, shatter- resistant design with high-adhesion properties to address the specific risks of a jobsite. Specifications Material High-transparency polyethylene (PE) Thickness 0.03mm - 0.10mm (customizable) Viscosity Medium adhesion (holding power ≥15h) Width 800mm - 2400mm (compatible with common glass sheet widths) Packaging Method Rolled, each roll length is 300m - 800m (customizable)

Dear Sir/Madam, (HS 284700) We would like to offer: Hydrogen Peroxide (H2O2). CAS No. 7722-84-1. EINECS No.: 231-765-0. Hydrogen peroxide is a very pale liquid which appears colorless in a dilute solution, slightly more viscous than water. It has strong oxidizing properties (oxidizer) but also found use as disinfectant and powerful bleaching agent. Widely use in: pulp & paper, detergent industry, etc.. Packaging: nett. 30kg in plastic jerrycan. 640 jerrycan in 1x20 FCL (appr. nett 19.20 MT) Concentrate: 30%, 50% & 70%. Produced by ISO 9001 certified manufacturer. Product of Indonesia. Antiseptic and Disinfectant (liquid or spray) also available. Source: Samator. For any interested parties, pls kindly contact for further details. Thank you. Contact: +6285892224657 (whatsapp, viber).

Minimum Order: 3 bushels