Paint, Pigments & Dyestuff

Cement based self-leveling compound, KDO425 Cement Self-leveling compound KDO 425: It is a kind of dry-mixed powdery material includes special cement, redispersible polymer powder, cellulose ethers and other active ingredient, is a high-tech environment -friendly product with advanced technology and formula refined. With fast hardening, people can walk on it after 4-5 hours, and 24 hours later can do surface construction, it’s more convenient for workers to operate than traditional artificial leveling.  Items Index Flowability (mm) Initial flowability ≥135 20min flowability ≥135 Tensile adhesive strength (Mpa) ≥1.0 Wear resistance (g) ≤0.50 Dimensional change rate (%) -0.15~+0.15 24h compressive strength (Mpa) ≥7.7 24h anti-bending strength (Mpa) ≥2.4 28 days compressive strength (Mpa) ≥20.4 28 days anti-bending strength (Mpa) ≥4.3 Construction method The substrate must be clean, dry firm and no any residue, then use KDO special interface agent to paint the base plane. After about 2-6 hours, mixed with water before construction, be sure to strictly self-leveling cement: water 25:6 ~ 6.5kg mixed. First 6 ~ 6.5kg of water into the bucket, then pour the product side down while stirring until a homogeneous mixture, lay up 1 minute, then stir once again briefly. Pour the mixture into the construction area, a zigzag rake to move to a desired uniform thickness (thickness constructability 1-4mm).

High strength cement self-leveling compound, KDO40M Cement Self-leveling compound KDO 40M: It is a kind of Polymer modified cement compound Includes special cement, redispersible polymer powder, cellulose ether and other active ingredient, is a high-tech environment -friendly product with advanced technology and formula refined. With fast hardening, people can walk on it after 4-5 hours, and 72 hours later can do surface construction, it’s more convenient for workers to operate than traditional artificial leveling. Items Index Flowability (mm) Initial flowability ≥135 20min flowability ≥135 Tensile adhesive strength (Mpa) ≥1.0 Wear resistance (g) ≤0.50 Dimensional change rate (%) -0.15~+0.15 24h compressive strength (Mpa) ≥6.0 24h anti-bending strength (Mpa) ≥2.0 28 days compressive strength (Mpa) ≥35 28 days anti-bending strength (Mpa) ≥6 Key Properties - It is easy to construct by stirring with water manually or mechanically. - It has good self-leveling and smoothness. - Self-leveling series have high compressive strength and wear-resistance, low shrinkage that is not easy to crack or generate delaminating and hollowing. - It has rapid solidification, smooth surface that can be travelled after 6- 8 hours. The plastic floor, carpet, tile or wood floor can be paved on the surface after 48 hours.

Self-leveling Compound Basecoat Primer, KDP-300 Product Description Self-leveling Compound Basecoat Primer(concentrated liquid) It is concentrated alkali resistant interface treating agent that the special formula and high-efficient additives could penetrate into the base plane and create compact waterproofing layer. The self-leveling cement adheres to the old base plane closely to give full scope to the maximum flow performance. Performance White latex Properties It can absorb the loose particles of base plane. It has high penetration and two-way cohesive force. It has closed base plane pores that could enhance waterproofing function. Application range It is suitable for treatment of base plane of all kinds of self-leveling construction, as well as bonding enhancer between other cement mortars and base planes. Construction method Keep the substrate must be clean, dry firm and no any residue If the water absorption of substrate is very strong, you can add water to dilute by rate 1:2 at the first construction, then use original prime at second or third construction.

water-based decoupage coatings are an excellent choice for protecting and enhancing decoupage projects, and can be used in a variety of applications, including home decor, furniture, paper crafts, and fashion accessories. Feature: 1.Water-resistant: Water-based decoupage coatings are water-resistant and will protect the decoupage from moisture and humidity. 2.Non-toxic: Water-based decoupage coatings are non-toxic and safe to use. They do not emit harmful fumes and are safe for use in indoor spaces. 3.Easy to use: Water-based decoupage coatings are easy to apply with a brush or sponge. They dry quickly and can be re-applied if necessary. 4.Glossy or matte finish: Water-based decoupage coatings come in glossy or matte finishes, allowing for customization of the final appearance of the project. 5.Durable: Water-based decoupage coatings are durable and provide long- lasting protection to the decoupage project.

Innovative Thermal Solutions with Water-Based Thermal Insulation Paints Discover the cutting-edge advantages of our water-based thermal insulation paints. These versatile coatings offer unparalleled thermal insulation benefits across diverse applications. Easy to apply and environmentally friendly, our paints contribute to improved energy efficiency, ensuring a sustainable and cost-effective solution for your projects. Elevate performance and comfort with VITAL CHEMICAL CO., LTD.'s revolutionary thermal insulation technology. Efficiency Redefined: Water-Based Thermal Insulation Paints at Your Service Immerse yourself in the efficiency revolution with our water-based thermal insulation paints. Specially designed for optimal thermal performance, these coatings bring a new level of comfort and energy savings to your spaces. VITAL CHEMICAL CO., LTD. proudly presents a range of solutions that not only meet but exceed industry standards. Explore the future of insulation with our advanced paint technology. Tailored Solutions Beyond Insulation: OEM & ODM Expertise with Water-Based Thermal Insulation Paints Going beyond exceptional thermal insulation, VITAL CHEMICAL CO., LTD. takes pride in offering customized OEM and ODM solutions. Our commitment to innovation extends to providing tailored coatings, including advanced water- based thermal insulation paints, designed for your unique requirements. Elevate your projects with our expertise, ensuring that every application is met with precision and excellence. Experience the fusion of cutting-edge water-based insulation technology and personalized solutions for a brighter and more sustainable future.

Water-Based Barrier Coatings for Paper Food Container Advanced Barrier Coating Solutions In the realm of protective coatings, VITAL CHEMICAL CO., LTD. stands out with its cutting-edge barrier coating for paper. Our product adheres to stringent FDA standards, ensuring safety and reliability. Specifically designed for the paper and packaging industry, our coatings create a robust shield, rendering paper and cardboard products impervious to moisture, grease, oil, and various liquids. This enhances the durability and longevity of your packaging solutions, offering a superior level of protection. Unmatched Performance in Barrier Coating Experience unmatched performance with VITAL CHEMICAL CO., LTD.'s barrier coating for paper. Our innovative solution redefines industry standards, providing an exceptional protective layer for paper and cardboard products. This coating is meticulously crafted to resist moisture, grease, oil, and a spectrum of liquids, ensuring the longevity and integrity of your materials. Elevate your packaging game with our advanced technology that goes beyond conventional barriers. Custom Solutions for Your Needs We not only offer top-tier barrier coating for paper but also provide tailored solutions to meet your specific requirements. Beyond our commitment to quality and innovation, we take pride in offering customizable OEM and ODM solutions. Whether you have unique specifications or demand a bespoke approach, our team is dedicated to crafting solutions that align with your vision. Choose VITAL CHEMICAL CO., LTD. for cutting-edge technology and personalized services, ensuring your packaging solutions stand out in the market.

2K White Color Auto Shop Paint Glossy Bright auto Paint Product Description Ration: paint:hardener:thinner=2:1:0.3 hardener: Helps to increase the hardness, brightness and adhesion of the paint film. Thinner: It has good dissolution and promote bonding effect. Characteristic: Two-component use in advanced bodywork painting make-up.film hard, bright, flexible fullness, particularly good protection and hiding power. extremely resistant to weather degradation and would provide lasting gloss and color retention. Surface cleaning: Remove wax, oil and other impurities with deoiling Mixing ratio Solid Color paint Hardener Thinner 2 1 0.3 <18℃ 2K Solid Color Paint Quick Drying QuickDrying 18-30℃ 2K Solid Color Paint Standard Drying StandardDrying >30℃ 2K Solid Color Paint Slow Drying Slow Drying 25℃ Quick Drying: 2hrs 25℃ Standard Drying & Slow Drying: 4hrs Spray Layers: 2-3 layers, 40-60um total thickness Spray Interval: 5-10mins, 25℃(It needs stand after spraying) Standing Time: Heating and baking after 15-20mins Paint Spraying Caliber: Gravity type(Upper kettle): 1.2-1.4mm Siphon type(lower kettle): 1.3-1.5mm Paint Spraying Pressure(Mpa): 2.0-4.0 Temperature Dust Free time Assembly time Burnishing time 25℃ 45mins 8-10hrs 16hrs 70℃ 5mins 30mins 60mins Reconstruction: If there are seedy and sags after spraying, it can be sanded by sand paper(1200#-2000#) and burnished after being fully cured. 2K Iron Red Bright Color Car Paint Acrylic Spray Lacquer 0 2K Iron Red Bright Color Car Paint Acrylic Spray Lacquer 1 2K Iron Red Bright Color Car Paint Acrylic Spray Lacquer 2

Product Description Introduction of Meklon Auto Refinish Finished Paint for BMW C31 Portimao Blue: Product Details Car brand: BMW Applicable models: 3 Series Color name: Portimao Blue Year: 2020 Models Depth: Standard Remark: Construction process: paint and thinner 1:1, wet spray twice, medium wet spray Twice, mist once, and varnish twice. Color Matching System Serial number Color masterbatch number Weight (g) Cumulative amount (g) Crystal Blue Pearl X05 40.36 40.36 Fine White Silver 403 5.15 45.51 Purple Blue 115 25.95 71.46 Mussels Nlue 143 15.38 86.84 Rose Red 131 9.13 95.97 Sparkling Blue Silver X08 4.03 100 Total:100g Recipe weight:100g Meklon Car care Portimao Blue paint in the same color as the BMW series, Almost an exact match to the original BMW color. Our paint is carefully formulated to match the original vehicle color with a superior gloss finish. And good quality, high wear resistance. Meklon car refinish factory focuses on quality control and production process. We use high-quality raw materials and advanced production technology to ensure the superior quality and durability of our coatings. Our products are rigorously tested and verified to ensure they meet goo industry standards. Meklon Automotive Repair Paint Factory is a company specializing in the production and sales of automotive repair paint. With years of experience and expertise, we are committed to providing customers with excellent products and services. We have cooperated with many well-known car manufacturers and established a good reputation and credibility in the market. Meklon attaches great importance to customer satisfaction and after-sales service. We provide comprehensive after-sales support, including technical consultation, product use guidance and problem solving, etc. Our team is always ready to answer our customers' queries and needs, ensuring they have the best possible experience with our products. In addition to providing Portimao Blue paint in the same color as the BMW series, Meklon can also provide customized branding services according to customer needs. Whether it is color matching, special effects or individual needs, we can provide customers with customized solutions to meet their unique requirements. Multipurpose Refinish Car Paint Portimao Blue Practical Fit BMW A31 0 Multipurpose Refinish Car Paint Portimao Blue Practical Fit BMW A31 1

Product Description Stone Paint Rock Pieces & Sand Natural Paint Masonry For Nippon Brushing Area:2 kilograms per square meter Name Imitation Stone Paint Main Raw Material Acrylic Usage Building Coating Other Names Spray Stone Paint Application Method Spray State Liquid Coating Main Component Acrylic Emulsion, Natural Stone Powder The Oretical Consumption 3~4kg/m2/coat (thickness Of Dry Film 2mm) Touch Dry 2H/20-25℃ Totally Dry 48H/20-25℃ Recoat Time 2-6H Based On Temperature>5℃& Humidity<85% Introduction: With the unique composite formula technology, Tehao provides you with multi-color, multi-level granite visual effects of advanced water-based paint: this product shows the visual performance of the paint pattern formed by the combination of multiple film colors, which can easily and truly present the three-dimensional texture of color compared to the ordinary Lacquer, bringing noble and gorgeous texture and beauty to all kinds of buildings. Features: • The coating presents the clarity and layering of natural granite. • Pollution resistance, mildew resistance, waterproof, anti-shedding, cleanable, anti cracking and other special functions. • Fast construction and short duration: reduce the load on the structure of the building. • Not affected by the base surface modeling, can be suitable for a variety of base surface types. • Excellent weather resistance, alkali resistance, durability and tightness. Application: Building interior wall, exterior wall, line board, decorative modeling, special modeling, etc. Applicable base surface: Cement mortar surface, concrete surface, plasterboard, wood board, all kinds of fiberboard, metal plate, etc. Surface requirements: Cement-based surface: use cement slurry or special putty to smooth plastering surface defects or hollows. Wood base: clean up, then spray oil seal primer. Metal base: Grind the base with 360# sandpaper, clean it with appropriate chemical solvent, and then coat with special primer.

Sulfonated Melamine Superplasticizer (SMF) Product Description Sulfonated melamine formaldehyde (SMF) is a Sulfonated Melamine Superplasticizer polymer used in cements and plaster based formulations to reduce water content, while increasing the fluidity and the workability of the mix. In concretes, addition of SMF in an appropriate mix design results in lower porosity, higher mechanical strength, and an improved resistance to aggressive environments. Category: Superplasticizer ether (powder) HS Code: 3824401000 CAS: 64787-97-9 Sulfonate , d melamine formaldehyde (SMF) is used as an additive in all types of grouts, mortars, and as a component of concrete admixtures. Powdered superplasticizer is a spray dried powder with free flowing characteristics ideal for dry blending and water dissolution. Sulfonated melamine formaldehyde (SMF) is also an anionic polymeric dispersant that deflocculates the particle agglomerations that form when cement and water are combined. Dispersion of the cement causes a reduction in the plastic viscosity of the cement paste which results in improved workability and decrease the water cement ratio. Specifications of Sulfonated Melamine Formaldehyde (SMF) Item Type Specification SMF KSM-200 Appearance White flowing powder      Moisture content (%) Max. 5% Bulk Density（kg/m3） 450-600 Chloride,% max.% 0.5 Sodium, % 3 - 4 PH 7.0-9.0 Recommended Dosage        0.3%-1.5%

Polycarboxylate Superplasticizer (PCE) Product Description Polycarboxylate Superplasticizeris (PCE), also called polycarboxylate ether superplasticizer, polycarboxylic ether based superplasticizers, is the best superplasticizer for concrete at present. The Polycarboxylate Superplasticizeris (PCE) is a new generation of polycarboxylate ether polymer, which can be used as a superplasticizer and water-reducing agent for cement- based materials such as high performance concrete, dry mortar, waterproof mortar, self-leveling, grout and polyphenyl thermal mortar. Category: Powdered Superplasticizer Ether  HS Code: 3824401000 CAS: 62601-60-9 Specifica , tions of Polycarboxylate Superplasticizer    Item Type Specification PCE KPS-400 PCE KPS-500 PCE KPS-600 Appearance White free flowing powder Moisture content (%) Max. 5% Solids content (%) 98 min PH 7.0-9.0 Particle Size (D50 um) App.70~100

Product Description Protein Gypsum Retarder is a new type of protein based high efficiency gypsum retarder with good fluidity, which can be mixed and dispersed well with gypsum, either by spiral mixing or grinding. It helps gypsum and plaster products to have lower strength-loss rate after gypsum gets hard. It helps to work easily with more efficiency and lower cost. Specification of Protein Gypsum Retarder  Item Protein Gypsum Retarder KDR-18 KDR-30 Appearance Light grey powder    Light yellow powder    Bulk density(g/L) 150-250 350-450 Water Content (Powder) (%) <3 <3 pH Value (20℃) (20% Liquid) 10-11 7-9 Dosage Recommendation (%)    0.05-0.1 0.05-0.1 Package 25kg/bag 25kg/bag

Hydroxypropyl Starch Ether Product Description Hydroxypropyl starch ether is a starch-based additive designed for dry mortars in the construction industry, imparting unique properties to cement and gypsum- based products. Hydroxypropyl starch ether, which has a similar chemical structure to hydroxypropyl methylcellulose (HPMC), not only provides similar functions to hydroxypropyl methylcellulose (HPMC), but also has good compatibility with other building aids. Capacitance. Used in conjunction with hydroxypropyl methylcellulose (HPMC), hydroxypropyl starch ether can play a better thickening effect, with better crack resistance and processability. It works well in neutral and alkaline conditions and is compatible with other additives in gypsum or cement-based building materials. The cost of mortar formulations can be significantly reduced by adding starch ethers.

Silicone Hydrophobic Powder Product Description Silicone hydrophobic powder is highly efficient, silane-siloxance based powdery hydrophobic agent, which composed silicon active ingredients enclosed by protective colloid. This easily used admixture makes such materials more hydrophobic and resistant to the structural damage or appearance problems caused by excess moisture and sunlight (UV) degradation. Specification Appearance White free flowing powder Silicone content(%) 50 min Bulk density (g/l) 550~600 Moisture content (%) 2 max Package 25kg/bag Properties 1. Supplied as free-flowing granules, which are easily mixed dry 2. Easily blended into material formulations during manufacturing or used as an admixture at the job site. 3. Adds hydrophobic properties to both exterior and interior cement-based materials, including concrete, cement, joint fillers, stucco, EIFS, plaster, grout, mortar, and more.