Paint, Pigments & Dyestuff

Spray Adhesive is formulated with good-quality raw materials and conforms to national compulsory standard, which possesses such features as low VOC, fresh smell, high solid content, good flexibility, easy application, strong adhesive force, environment-friendly etc. Features and benefits Environmental: benzene free, no hazardous materials and additives and low VOC. Best bonding effect can be achieved even under temperature around 60°C. Fast drying speed and long viscosity-keeping time. Strong bonding strength and good initial bonding power; water-proof and ageing resistant. Easy application. It is easy to apply the adhesive evenly on the bonding surface and no adhesive legging occurs. Application for use 1,Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. 2, Pour adhesive on the two bonding surface separeately and spread it with brush or scraper. To achieve the best bonding performance, the application should be done toward the same direction and evenly. 3.the adhesive should be applied evenly and not too thick to avoid the weakening of the bonding strength. But for porous materials or materials with coarse surface, you can apply more accordingly. 4,After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness. The airing time is about 5 -8 minutes/25C and varies from the temperature, humidity and adhesive film. The bonding can be done after the surface is dry by touch. For porous materials, you can bond directly after application of the adhesive. 5,The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the bonding surfaces back and forth, or the bonding effect will be affected.

Product Description PUR3513-W is a moisture reactive hot melt adhesive, mainly used for bonding metal, glass, wood, PC, ABS plastic and other materials, and has good adhesion to glass with printed layers. BGP Adhesive has the advantages of fast positioning, high production efficiency, and automatic assembly process can be realized. Features: 1) PUR hot melt adhesive 3513-W  has good initial viscosity, fast positioning, short holding time. After gluing and laminating, it directly participates in the subsequent process to improve production efficiency. 2) PUR hot melt adhesive 3513-W has the characteristics of waterproof, shock resistance, pressure resistance, good impact resistance, high bonding strength, good high and low temperature resistance and so on. 3) PUR hot melt adhesive 3513-W has the features of solvent-free, non- irritating, non-toxic and harmless to human body, It can conform with EU environmental protection requirements. Where to use PUR Adhesive PUR hot melt adhesive3513-W  is very  strong adhesion to metal, plastic, aluminum, glass, wood, PP, PC, ABS, etc., and the effective time of bonding is long. Technical  data Test item  Specification value Main ingredient Polyurethane Product Number  PUR3513-W color:  White Solid content 100% Density (g/cm3)  1.04±0.10 Viscosity (130℃) 4200±700 cps Opening hours 60～90 sec  Operating temperature 120～150℃ Temperature range -55～140℃ Application Metal, plastic, wood, PC, ABS, etc. have strong adhesion

Product Description PE primer also called unsaturated polyester primer, is cured by blending the main agent, accelerator and initiator to carry out polymerization bridging reaction. The solvent is styrene, which participates in the reaction when forming a film. Compared with solvent-based wood lacquers, the advantage of PE lacquers is that they have "100% reactivity", which means that the liquid composition can be. Model MODEL Description   ED4040 PE transparent primer   ED4030 PE crystal clear primer   ED4020 PE extra clear primer   ED4010 PE  Super extral clear paint   ED4007 PE white primer   ED4001 PE high fullness white primer   ED4009 PE anti cracking white primer   Mixing ratio temperature Reference ratio (paint: blue water: white water) temperature Reference ratio (paint: blue water: white water) 10~15℃ 100kg：2.2kg：2.5kg  or 100L：2.4L：2.3L 20~25℃ 100kg：1.5kg：2.0kg 100L：1.65L：1.85L 1 , 5~18℃ 100kg：2.0kg：2.3kg or 100l：2.2L：2.05L 25~30℃ 100kg：1.2kg：1.6kg or 100L：1.35L：1.45L 18~20℃ 100kg：1.7kg：2.2kg or 100L：1.9L：1.95L 30~35℃ 100kg：0.7kg：1.3kg or 100L：0.80L：1.2L Remark When the humidity is reduced, the amount of blue water can be reduced. When the humidity increases, the amount of blue water should be increased appropriately. Note: we must use our assort products, such as thinner , blue water, white water, etc., and ensure that all products are within the warranty period. Thinner dosage depends on spray viscosity.

PU white primer Product Description Pu white Primer SD2023 is a fast-curing, high solid white primer for application on wood or wood products. It is a two-component  , and it has the  excellent filling properties, good flexibility and excellent sanding properties. Features of PU PRIEMR Strong hiding power Good leveling property Good whiteness Where to use of pu primer Strongly recommended for interior wood furniture. It can be used on MDF , PLYWOOD , SOLID WOOD ETC . Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting. Product Data of pu primer Model SD2023 Solvent Type Solvent base Resin Type  Alkyd resin Pot life 4 hours Color White Viscosity Mixture 11''-13'' (DIN 2) Specific Gravity Approximately 1.52kg/L Solid Content 78±2% Dosage per SQM 110-130 gram Application Data Spray : conventional spray gun . Brush : goat hair brush. The substrate must be sound, clean, dry and free from dust, oil, grease,laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.

UV Roller Varnish For Paper Product Description UVG-250 uv roller varnish is suitable for the whole-sheet roll coating of paper (applicable substrate: copper paper and white card paper, etc.). With good adhesion, flexibility, wear resistance and other characteristics, to provide good luster, wear resistance and other properties. This product is a base-free light oil, which can simplify the process and save the production cost. Safety standards Of UV Roller varnish: (1)UVG-250 uv roller varnish  Meet the EU EN71 PART 3 standards for heavy metal content. (2)UVG-250 uv roller varnish   Comply with the limit requirements of the Revised Directive (EU) 2015 / 863 as in Appendix II of the EU RoHS Directive 2011 / 65 / EU. (3) Pass the phthalate (or ester) safety standards. (4) Comply with EU Regulation No.1907 / 2006. Ink technical parametersOf UV Roller varnish: project surface Viscosity (25℃. Coat 4 cups) adhesion Insulation levelling property metric transparency liquid 26 ± 2 seconds good good good project alcohol resistance Gloss / 60° gloss Light solid energy Curing speed UV absorption peak metric Level 4 85 ± 3 degrees 50~80mj/cm2 ≥40M /min 365nm Recommended Instructions of UV Roller varnish: 1. Stir or shake well before use to prevent stratification of light oil during placement. 2. The viscosity of UVG-250 uv roller varnish has been adjusted to the use viscosity. Generally, special diluent is not required. 3. When used, the coating thickness is recommended to be 10~12um, and the coating amount of 10g / ㎡ UV photofixation energy is set to 50~80mj / cm2The transfer speed is set to about 40M / min to ensure sufficient curing, otherwise the surface return adhesion and paint loss during the placement process will occur. 4. It is recommended to choose more than 2 medium and high pump lamps, line power 100W / ㎝, single lamp power 5k w / branch, lamp pipe is 12~15 ㎝ away from the substrate, lamp service life of 800 hours, replaced in time after aging, to ensure full curing.

Basic Orange 2 ( Chrysodine ) Color Index: C.I.Basic Orange 2 (11270) Molecular Formula: C12H13CIN4 CAS NO: 532-82-1 Basic Orange Application: Basic orange is used for dyeing of chemical fiber and direct printing of fabrics, also dyeing of silk, wool, cotton fibers, with less fastness compared with basic green. Basic orange is also used for dyeing of leather, paper, feather, grass, wood, bamboo, etc. Fabric Dyes Chrysodine Basic Orange 2 Large Crystals Dyes C.I. Name: Basic Orange 2 Other Name: Chrysodine CAS No.: 532-82-1 Strength: 100% Appearance: Brown Red Crystals Molecular Formula: C12H13CIN4 In the dyeing fastness of cotton fabric: Accord with a standard grade. Solubleness: Soluble. Packing: Normally packed in 25kgs fiber drum or iron drum or customized. Usage: Ink dyestuffs, leather dyestuffs, paint dyestuffs, paper dyestuffs, plastic dyestuffs, textile dyestuffs.

Basic blue 9, is also known as Methylene Blue, Methylene blue BB, or methyl blue. It is a golden red flash or flash golden bronze powder. Soluble in water, slightly soluble in alcohol, blue. Case of concentrated sulfuric acid is yellow green, blue diluted. In concentrated nitric acid in the Gray-green, added sodium hydroxide solution is purple and dark purple precipitate, add hydrochloric acid unchanged. C.I.: 52015 CAS NO. : 61-73-4 Molecular Formula: C16H18ClN3S Molecular Weight: 319.858 Strength: 100% Packing: Packed in 25kgs iron drums, plastic bags. Application Instructions: Basic blue 9 is used for silk, wool dyeing, the light fastness is poor; When used as tannin mordant dyeing for cotton dyeing, light fastness is 3; Basic blue 9 or methyl blue, was previously used for the direct printing of cotton, but now, it is rarely used in this way; Other uses including pigment for the paper, bamboo, wood color, for the manufacture of ink and color lake pigments and biological, bacteriological stain; Also used as solvent dyes.

EGDA CAS 111-55-7 Odoruless Acrylic Paint Solvent EGDA Ethylene Glycol Diacetate C6H10O4 High blush resistance Low MIR value Non-HAP Non-SARA Predicted to be readily biodegradable* Slow evaporation rate Application advantages Yongtai™ EGDA is a combination of low-carbon organic acids and alcohols. With the growth of the carbon chains in the alcohol and acid groups in the ester, its solubility for low-polarity resins is enhanced. In addition, the content of Yongtai EGDA diester is as high as 99.5% , very little impurity, less moisture and low acid value, etc., make it low odor, not easy to turn yellow, stable distillation range, very suitable for odorless paint. Yongtai™ EGDA is a colorless, low odor, very slow-evaporating solvent that gives good flow-out to baking lacquers and enamels. Its major uses are in thermoplastic acrylic coatings as a reflow solvent and in foundry core-binding applications. Yongtai™ EGDA aids in resin synthesis with a balance of hardness, flexibility, gloss retention, color retention, and adhesion to various substrates, and also allows for broader formulation in solvents suitable for specific applications. Yongtai™ EGDA is also widely used in foundry chemicals, such as foundry resins, foundry resin-related additives, etc. Casting resins represented by phenolic resins and furan resins, and casting aids such as hardeners, adhesives, and cleaning agents all use our EGDA. And it can replace some old solvents, such as BGA, DBE, GTA, DAA, etc., which can help manufacturers avoid crystallization and make better chemicals. Physical and Chemical Properties CAS No. 111-55-7 Chemical formula C6H10O4 Purity ≥ 99.5% Molecular weight 146.14 Water Content ≤ 0.05% Burning point 635 ℃ Acid value ≤ 0.015 mgKOH/g Boiling point (101.3kPa) 191 ℃ Flash point (open cup) 105 ℃ Relative density (20℃/20℃) 1.1 g/cm³ Flash point (closed cup) 88 ℃ Refractive index (20°C) 1.4159 Viscosity (20°C) 2.9 mPa•s Pt-Co 5 Solubility (20°C) 16.4 wt % Apperance colorless transparent liquid Other applicable industries outdoor inkjet, PCB circuit board ink, electronic ink, water glass curing agent, water-based adhesive, organic synthesis intermediate, insulating paint, cleaning agent, paint remover, adhesive, flux, coating solvent, leather brightener. Odoruless Acrylic Paint Thinner Solvent ECO Ethylene Glycol Diacetate 0 Security terms S26 - In case of accidental contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S24/25 - Avoid contact with skin and eyes. S22 - Do not breathe dust. Odoruless Acrylic Paint Thinner Solvent ECO Ethylene Glycol Diacetate 1 Certificates We can provide various quality inspection certificates, such as ISO9001, SGS, product inspection list, MSDS, RoHS, customs non-hazardous identification certificate, and honors issued by the government such as star enterprise, AAA credit enterprise and so on. Odoruless Acrylic Paint Thinner Solvent ECO Ethylene Glycol Diacetate 2 FAQs Q1: Why should I choose your company? We have our own production base, 8 laboratories, and a united master and doctoral research team. All quality and safety can be guaranteed, and we can provide competitive prices and services. Q2: What products do we have? A: We mainly produce and sell high-purity alcohol ester solvents such as EGDA(Ethylene glycol diacetate) ,PGDA(propylene-glycol diacetate),DPMA(Dipropyleneglycol methyl ether acetate) etc. Q3: How to confirm the product quality before placing an order? A: Samples can be provided. We not only have internal test reports before shipment, but also test reports issued by authoritative third-party testing agencies. Q4: What is the minimum order quantity for OEM/ODM products? A: We can customize labels for you according to the samples or goods you need. Please contact us to make your brand go smoothly. Q5: What is the delivery time/method? A: We usually ship the goods within 3-5 working days after you make the payment. We can express by sea,land, you can also choose your freight forwarder. Q6: Do you provide after-sales service? A: We provide 24*7 service. We can talk through email, whatsapp, phone or any way you find convenient. Our Commitment: We Endeavour to be the best company to 'work for' and the best company to 'buy from'.

Product Name Coloured Epoxy Floor Paint Drying time (25℃) Touch dry≤6 hours / Hard dry≤24 hours Impact resistance 500g steel ball (g·cm) Pass Wear resistance (700g / 500r) ≤0.03g Pencil Hardness (H) ≥3 Coverage (advise 2 coats) 0.25kg/sqm per coat

Tio2 rutile r-2140 for Architectural coating World famous brand Tinox masterbatch grade Pigment white R-2280 in final product perception bright and clear,Brightness, R-2280 close gap between SP and CP performance, PVC white TINOX R-2280 gives polymers superior brightness, color b value of R-2280 shows an excellent level, close to CP-grades.

Hydroxyethyl Cellulose CAS:9004-62-0 Hydroxyethyl Cellulose (HEC) is nonionic water-soluble cellulose ether, used as thickener, protective colloid, water retention agent and rheology modifier in different applications like water-based paints, building materials, oil field chemicals and personal care products. Typical properties Appearance  White to off-white powder Particle size 98% pass 100 mesh  Molar substituting on degree (MS) 1.8~2.5 Residue on ignition (%) ≤0.5 pH value 5.0~8.0 Moisture (%) ≤5.0    Popular grades Typical grade Bio-grade Viscosity (NDJ, mPa.s, 2%) Viscosity (Brookfield, mPa.s, 1%) Viscosity set HEC HS300 HEC 300B 240-360 LV.30rpm sp2 HEC HS6000 HEC 6000B 4800-7200   RV.20rpm sp5 HEC HS30000 HEC 30000B 24000-36000 1500-2500 RV.20rpm sp6 HEC HS60000 HEC 60000B 48000-72000 2400-3600 RV.20rpm sp6 HEC HS100000 HEC 100000B 80000-120000 4000-6000 RV.20rpm sp6 HEC HS150000 HEC 150000B 120000-180000 7000min RV.12rpm sp6 Application Types of Uses Specific Applications Properties Utilized Adhesives Wallpaper adhesives  latex adhesives  Plywood adhesives Thickening and lubricity Thickening and water-binding Thickening and solids holdout Binders Welding rods  Ceramic glaze Foundry cores Water-binding and extrusion aid Water-binding and green strength Water-binding Paints latex paint Texture paint Thickening and protective colloid Water-binding Cosmetics&detergent Hair conditioners  Toothpaste  liquid soaps and bubble bath Hand creams and lotions Thickening Thickening Stabilizing Thicken , ing and stabilizing Packaging: HEC Product is packed in three layer paper bag with inner polyethylene bag reinforced , net weight is 25kg per bag. Storage: Keep it in cool dry warehouse,away from moisture, sun,fire,rain. KIMA CHEMICAL CO.,LTD www.kimachemical.com

Minimum Order: 1 bags

cas: 131-27-1 Molecular Formula:C10H9NO6S2 Molecular weight:303.31 Appearance: Grey or slightly reddish powder Amino Value: ≥70% Purity of amino C acid: ≥97% Water insoluble substance: ≤0.40%

Acrylic High Adhesive Auto Base Paint With Good Covering For Car

Customized Acceptable protection Water Based Coating for mildew proof paint. Features Environmental protection, sterilization and mildew prevention, used in hospitals, basements, freezers and other damp moldy black wall, long-term. Product Info Solid content (%) ≤50 Construction besmear brush two barrier-free Surface drying 1 (hour) Complete curing 1 days(25℃) Impact strength (cm) ≥50 Flexibility≥ 1 Surface treatment All surfaces to be coated should be clean, dry and free from contamination.Please avoid rainy days for outdoor construction. Precautions When brushing or rolling the product, it may take 2-3 coats to achieve the specified dry film thickness.