Chemicals & Plastics - Others

Main applications include adhesive: fast curing adhesives under room temperature, high toughness adhesive, anaerobic adhesive and light sensitive adhesive; casting material for electrical insulation. Specifications of Tetra TTA182 (Cas 21544 03 6) Grade TTA182 Product name Diglycidyl4-Cyclohexene-1,2-dicarboxylate CAS No. 21544-03-6 Epoxy equivalent (g / eq) 150～175 Viscosity (mpa.s/25℃) 600~1200 If you want to know more types of synthetic resin, please leave us a message. As a speciality resin supplier, we will do our best to meet all the needs of customers.

Minimum Order: 200

TTA3150 poly [(2-ethylene epoxide) - 1 2 cyclohexane diol] 2-ethyl-2 - (hydroxymethyl) - 1,3-propylene glycol ether is a typical cycloaliphatic epoxy specialtyresins, which contains very little chloride ions and chloride salts. It has the characteristics of high transparency, high heat resistance, high Tg, excellent weather resistance, and excellent electrical properties (arc resistance and electric trace resistance). Its epoxy group at the end has similar reactivity with the epoxy group of polyether polyol glycidyl amine epoxy resin and can be cured with curing agents such as anhydride, phenol, amine, and cationic curing agent. It is widely used in composite materials, electrical insulation materials, electronic adhesives, powder coatings, and other fields. Specifications of Tetra TTA3150 (Cas 244772 00 7) Grade TTA3150 Product name Poly[2-oxiranyl)-1,2-cyclohexane diol]-2-ethyl-2- (hydroxymethyl)-1,3- propan , ediol ether CAS No. 244772-00-7 Content（%） 95.0 min Epoxy equivalent (g / eq) 170～200 Chroma 50 APHA max Softening Point (℃) 70～90 High Heat Resistance The curing of TTA3150 with methyl-hexahydro phthalic anhydride has excellent transparency and high heat resistance temperature; the curing with methyl- tetrahydro phthalic anhydride has slightly lower Tg and yellow color, and the curing with methylnadic anhydride has better heat resistance than that of the above two anhydrides. It shall be noted that the color after curing is brown and translucent. Special attention: TGA data show that the TTA3150 and MHHPA cured product has the highest thermal decomposition temperature, and the TTA3150 and MNA cured product has the highest Tg, but the lowest thermal decomposition temperature.

Minimum Order: 200

As a typical special epoxy resin 3d printing, TTA500 has the characteristics of low viscosity, low shrinkage, and high-temperature resistance. Its molecular structure contains three epoxy groups and a heat-resistant benzene ring, thus, the cured product has high crosslinking density and high heat resistance. Now it is mainly used in embedment pouring, high temperature resistant adhesive, carbon fiber, and glass fiber, especially in the fields of pultrusion composite products. Specifications of Tetra TTA500 (Cas 5026 74 4) Grade TTA500 Product name N,N-Diglycidyl-4-glycidyloxyaniline CAS No. 5026 74 4 Epoxy equivalent (g / eq) 100～115 Viscosity (mpa.s/25℃) 1500～3000 Now the price of specialty resins is reasonable, anything you need, please contact us.

Minimum Order: 200

Glycidyl Amine Epoxy Resin is a kind of epoxy resin with glycidyl amine in its molecular chain. These products have various features on dilution ability, glass transition temperature, adhesion, volume shrinkage, and migration. Therefore, they have been widely applied in UV-curing coatings/inks, adhesives, 3D printing, insulating castables, electronic packing materials, and other fields. How to Use Glycidyl Amine Epoxy Resin? It can be used in special property composites, special high-temperature- resistant materials, high-temperature-resistant coatings, high-temperature- resistant adhesives, electronic and electrical castables, and other fields. Glycidyl amine insulation epoxy resin is suitable for special high-temperature- resistant materials, high-temperature-resistant coatings, and high-temperature- resistant adhesives. Glycidyl amine epoxy resin can also be used in electronic and electrical castables and other fields. What is Glycidyl Amine Epoxy Resin Made From? Glycidyl Amine Epoxy Resin refers to a series of epoxy resins having glycidyl groups attached to the aromatic amine. Such materials are prepared by the reaction of aromatic amine with epichlorohydrin, followed by conventional dehydrochlorination. Main Features of Glycidyl Amine Epoxy Resin It is a commonly used resin matrix for high-performance composite materials; Glycidyl amine epoxy resin has good strength; It has fine mechanical properties; Glycidyl amine epoxy resin has excellent corrosion resistance. As a specialtyresins manufacturer, we can offer sorts of related products for sale, anything you need, please contact us.

Minimum Order: 200

TTA184 is a typical epoxy resin mixture with low viscosity, low chlorine, and excellent weather resistance. Its finished cured product has high crosslinking density and certain toughness. It is especially suitable for insulating materials with high electrical property requirements. It has good high- temperature resistance and insulation, arc resistance, and leakage track resistance. TTA184 is mainly applied to LED packaging, insulation embedment, mold casting, metal surface bonding, adhesives, composites, outdoor casting, etc. Specifications of Tetra TTA184 (cas 5493 45 8) Grade TTA184 Product name Diglycidyl 1 2 cyclohexanedicarboxylate CAS No. 5493 45 8 Epoxy equivalent (g / eq) 160～180 Viscosity (mpa.s/25℃) 600~900 Chroma 100 APHA max If you have needs to know more kinds of specialty resins, please visit our website.

Minimum Order: 200

Cycloaliphatic epoxy resins refer to a series of products obtained by oxidation with butadiene and acrolein as base materials and the mixture of hydrogen peroxide and peracetic acid as oxidant. They have a variety of applications, including 3D printing, coating, ink, adhesives, composites, and electronics, among others. cycloaliphatic epoxy resins may be cured by anhydride-based methods as well as UV/EB- and thermally-curable methods. What Is Cycloaliphatic Epoxy Speciality Resin? Cycloaliphatic epoxide resin refers to a series of products obtained by oxidation with butadiene and acrolein as base materials and the mixture of hydrogen peroxide and peracetic acid as oxidant. Epichlorohydrin is not selected as the synthetic base material, thus, the molecular structure does not contain any benzene ring and hydroxyl group, and the epoxy group is directly connected to the cycloaliphatic ring through oxidation reduction. As one of cycloaliphatic epoxy resin manufacturers, we can offer kinds of related products for sale, if you have needs, please contact us. Now synthetic resin price is low, if are interested, please leave us a message.

Minimum Order: 200

As the typical cycloaliphatic epoxy resin, TTA26 (bis ((3 4 epoxycyclohexylmethyl) adipate) has excellent weather resistance and electrical insulation, low curing shrinkage, good heat resistance, low viscosity and good toughness. It is widely used in the fields of composites, electrical insulation materials, electronic embedment materials, cationic curing resin raw materials, etc. It has similar electrical insulation and weather resistance to TTA21, but it shows good flexibility due to its increased molecular chain length. It is often used in combination with TTA21 to improve the toughness and other properties of the cured product. It is suitable for UV SLA, anhydride and thermal cation curing. Specifications of Tetra TTA26 (Cas 3130 19 6) Grade TTA26 TTA26E Product name Bis(3,4-epoxycyclohexylmethyl) adipate CAS No. 3130-19-6 Total chlorine（ppm） / 200 max Epoxy equivalent (g / eq) 190～210 190～210 Viscosity (mpa.s/25℃) 400～750 400～750 Chroma 150 APHA max 150 APHA max Water(%) 0.10 max 0.10 max Density (g / ml) 1.140～1.158 / Application of Tetra TTA26 (Cas 3130-19-6) Dilution Ability Formula composition: TTA26: polyurethane acrylate Test conditions: DHR-25 ℃ DHR rotary rheometer The figure shows that the TTA26 has a strong dilution ability. There will be an obvious dilution effect when the addition amount in the formula exceeds 20%. Jiangsu Tetra New Material Technology Co., Ltd. is a Chinese multinational chemical corporation active in the fields of specialty, fine and custom chemicals. Tetra has strong R&D, Manufacturing, Sales, and Customer Services teams, which makes it an leading company of cycloaliphatic epoxy resin, and aims to become a top-tier solution provider in new materials. If you want to know more kinds of specialtyresins, please visit our website.

Minimum Order: 200

Properties: highly corrosive, odorless, non-flammable white solid. It is produced as prills (pearls/beads), flakes or fused solid which are highly water-soluble, making a slippery solution. Usage: used as a raw material in the manufacturing of soaps, detergents, textiles and paper. Also used in water softening, refining petroleum products, sanitation, hygiene and production chemicals. Packaging: 25kg bags Technical Data Sheet: Parameter Guarantee Caustic soda flake Caustic soda pearl Caustic soda solid Sodium Hydroxide (as NaOH) % ≥ 99.0 99.0 99.0 Sodium Carbonate (as Na2CO3) % ≤ 0.8 0.8 0.8 Sodium Chloride (as NaCl) % ≤ 0.05 0.05 0.05 Ferric Oxide (as Fe2O3) % ≤ 0.008 0.008 0.008

Minimum Order: 25

PEEK Teeth R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of Dental Peek Material R&D Series Material Properties Test Method Conditions Units 770G Mechanical Data Tensile Strength ISO 527 B reak,23℃ MPa - Y ield,23℃ MPa 100 Tensile Elogation ISO 527 Break,23℃ % 45 Flexural Strength ISO 178 Break,23℃ MPa - Y ield,23℃ MPa 165 Fleoural Modulus ISO 178 23℃ Gpa 4.1 Compressive Strength ISO 604 23℃ MPa 125 Charpy Impact Strength ISO 179/leA Notched kJm-2 7 ISO 179/IU Unnotched kJm-2 - Izod Impact Strength ISO 180/A Notched kJm-2 7.5 ISO 180/U Unnotched kJm-2 - Mould Shrinkage ISO 294-4 Along flow % 1 Across flow % 1.3 Thermal Data Melting Point ISO 11357 ℃ 343 Glass Tansition (Tg) ISO 11357 Onset ℃ 143 Special Heat Capacity DSC 23℃ kj kg-1℃-1 2.2 Coefficient of Thermal Expansion ISO 11359 Along flow below Tg ppm K-1 45 Along flow above Tg ppm K-1 120 Heat Deflecion Temperature ISO 75A-f 1.8Mpa ℃ 152 Thermal Conductivity ASTM C177 23℃ W m-1K-1 0.29 Flow MeltIndex ISO 1133 380℃,5kg g10min-1 10 Miscellaneous Density ISO 1186 Crystalline gcm-3 1.3 Amorphous gcm-3 1.26 Shore D Hardness ISO 868 23℃ 85 Water Absorption(3.2mm thick Tensile Bar) ISO 62-1 24h,23℃ % 0.07 by immersion Equilib riu m,23℃ % 0.4 Electrical Data Dielectric Strength IEC 60243-1 2mm kV mm-1 23 Comparative Tracking Index IEC 60112 V 150 Dielectric Constant IEC 60250 23℃,1kHz 3.1 23℃,50kHz 3 Loss Tangent IEC 60250 23℃,1MHz 0.004 Volume Resistivity IEC 60093 23℃,1V Ω cm 10 16 275℃ Ω cm 10 9 More details of peek dental material pdf, please visit our website. Polyetheretherketone a suitable material for fixed dental prostheses, if you have needs, please leave us a message. Zhongyan is a leading peek material supplier, providing types of natural peek material. Widely used in the profile, medical, wire & cables, energy development, and transportation.

Minimum Order: 400

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin Fine Powder PF Series-550PF PEEK Pure Resin Fine Powder PF Series-330UPF PEEK Pure Resin Fine Powder PF Series-330PF PEEK Pure Resin Fine Powder FAQs of Grade PF PEEK Pure Resin Fine Powder Q Properties of Grade PF PEEK Pure Resin Fine Powder A PEEK polyetheretherketone is a special engineering plastic with excellent properties such as high-temperature resistance, self-lubrication, easy processing, and high mechanical strength, which can be manufactured and processed into various mechanical parts, such as automotive gears, oil screens, gear shifting starters; Aircraft engine parts, automatic washing machine rotors, medical equipment parts, etc. Now the peek powder price is low, if you have needs to buy peek powder coating, please contact us. If you want to know more details of peek thermoplastic polymer, please visit our website.

Minimum Order: 400

Good toughness and impact resistance, it can be disinfected using steam, ethvi alcohol and rays, etc. It has been widely used in the medical, pharmaceutical and food processing industries. Types of Grade G PEEK Pure Resin Pellets ZYPEEK Supplier G Series-770G/770GH PEEK Pure Resin Pellets G Series-550G/550GH PEEK Pure Resin Pellets G Series-330G/330GH PEEK Pure Resin Pellets G Series-551G/551LG PEEK Pure Resin Pellets FAQs of Grade G Peek Resin Pellets Q G Series-770G Peek Pellets A Polyetheretherketon-P (Pure Resin Powder): Can be used as raw material for compounding and injection parts. PEEK-P(Pure Resin Powder) Can be used as raw material for compounding and injection parts. As one of peek resin manufacturers, we will offer kinds of related products for sale, and the peek pellets price is affordable, anything you need, please contact us. More details of peek resin properties, please visit our website. As a peek raw material company, we will do our best to meet all the needs of customers.

Minimum Order: 400

PEEK-GL series, is a glass fiber composite modified peek plastic materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. Types of Grade GL Glass Filled Fiber Reinforced PEEK ZYPEEK Supplier GL Series-770GL30/770GL30H PEEK Glass Fiber Reinforced GL Series-550GL30/550GL30H PEEK Glass Fiber Reinforced GL Series-330GL30/330GL30H PEEK Glass Fiber Reinforced FAQs of Grade GL Glass Fiber Reinforced PEEK Q Glass Filled Peek Properties A The glass filled peek temperature (Tg) of the EEK is 143°C and the melting point (Tm) is 340°C. The high melting point gives PEEK excellent high- temperature resistance. The fiber reinforcement grade PEEK has a heat deflection temperature of up to 315°C and a long-term continuous use temperature (UL 946B) of up to 260°C. In addition, PEEK maintains a high level of strength and modulus at high temperatures, which means that PEEK has excellent high-temperature mechanical properties. If you want to know more kinds of plastic peek material, please visit our website.

Minimum Order: 400

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. Types of Grade FC Super Wear Resistant PEEK ZYPEEK Supplier FC Series-330FC30 PEEK Super Wear Resistant FC Series-770FC30/770FE20/770FE20H PEEK Super Wear Resistant FC Series-FC327 PEEK Super Wear Resistant FAQs of Grade FC Super Wear Resistant PEEK Q Wear Resistance of Grade FC Super Peek Wear Resistance A PEEK (polyetheretherketone) materials are used at extremely high temperatures (approx. 260 degrees), have extremely high stiffness and hardness, and have a unique high tensile and fatigue strength. In addition, its heat resistance and chemical stability are excellent. The natural peek material has excellent dielectric properties until temperatures reach 260 degrees and is resistant to energy rays. PEEK has excellent comprehensive properties, good mechanical properties, high temperature resistance, excellent chemical resistance, making it the most versatile high-grade plastic. Features: The maximum allowable working temperature in the air is very high (can work continuously at 260 degrees, up to 310 degrees in a short time), mechanical strength, high rigidity and hardness, high temperature resistance, excellent chemical resistance and hydrolysis resistance, excellent wear resistance and friction resistance, extremely high creep strength, excellent dimensional stability, excellent ultraviolet resistance, excellent high-energy radiation resistance, inherently low flammability, and less smoke when burning.

Minimum Order: 400

PEEK has outstanding heat aging properties, good flame retardancy, self- extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still keeps lower dielectric constant and dielectric loss in high frequency range, and can be used to make special cables for nuclear power, marine and other special fields. Application: High Temperature Engines/ High Temperature Metallurgy/medical / High Temperature Nuclear Power/ Oil Field/ High Temperature Chemical Industry/ High Energy Exploration Popular Peek Raw Material Color PEEK R&D Series GL Series-550GL30/550GL30H PEEK Glass Fiber Reinforced FC Series-330FC30 PEEK Super Wear Resistant Related Peek Applications PEEK Seal Material in Mechanical Mechanical PEEK Valve in Home Appliances Home Appliances PEEK in Electronic & Electrical Electronic & Electrical We have kinds of peek zip ties for sale, if you have needs, please contact us. As one of peek material manufacturers, we will do our best to meet all the needs of customers.

Minimum Order: 400