Other Chemicals

This Mutoh Drafstation RJ-900C / RJ-901C DX5 Printhead - DG-44246 is suitable for Mutoh Drafstation printers. This is the original Mutoh printhead (part number DG-44246) with a Mutoh 40 digit head ID. This printhead is intended to be used with water based inks. Product specifications Technology: Micro-Piezo Native resolution: 1440 dpi Min. Droplet Size: 1.5 pico litre Max. Droplet Size: 21 pico litre Tot. Amount of Nozzles: 1440 (8 lines x 180 nozzles) Firing Frequency: 8 kHz Ink Compatibility: Water Based ink or Sublimation Ink This printhead carries a manufacturer warranty. Country of origin : Japan We recommend replacing the head data cables together with the print head. Note: DG-44246 replacing DF-49029

Minimum Order: 1 bags

This is latest type Seiko SPT-510 / 35pl Printhead (RH1513D-3322) with New IC Driver chip produced by Seiko. Both new and old IC driver chips perform the same. This IRH1513D-3322 printhead replaces the IRH1513D-1321 version. Fully equipped with 510 active nozzles for high-resolution (720dpi) and high-speed (35 pl) printing and steel-plate protection for a longer life, this durable printhead lasts 4-5 times longer than many common128 printheads. Specifications Compatible with Oil, UV and solvent inks Technology: Drop on demand Piezo ElectricLinear Print Speed: 0.49 m/sec@360dpi Active Nozzles: 510 Native Resolution: 180 dpi Max Resolution: 720 dpi Drop Volume: 35 pl Firing Frequency: 6-8 Khz Linear Print Speed: 0.49 m/sec@360dpi Proprietary parrallel I/F: 30 pins Voltage: 19.0v, 19.4v, 19,8v, 20.0v, 20.2v,20.4v,21v,21.4v This printhead carries a manufacturer warranty. Country of origin : Japan We recommend to change the head cables when installing a new printhead.

Minimum Order: 1 bags

The Starfire SG1024/MC Printhead is a high-performance inkjet printhead designed primarily for industrial ceramics production and other demanding printing applications. It features 1024 independent channels arranged in 8 rows on a single metal nozzle plate, enabling a native resolution of up to 400 dpi. The nozzle plate is engineered for abrasion resistance and durability, allowing long service life in harsh environments. Starfire SG1024/MC Printhead Key details: Print width of 64.96 mm (2.55 inches). Nozzle spacing of 0.0635 mm. Capable of continuous ink recirculation using RediJet technology, which increases open time, reduces downtime, and improves startup, especially for highly pigmented and fast-drying inks. Nominal drop size of 26 picoliters with an adjustable range from 30 to 80 picoliters; supports binary and grayscale jetting modes via the VersaDrop system. Maximum firing frequency up to 30 kHz depending on droplet size. Durable, collar-mounted metal nozzle plate designed to withstand abrasion and is removable for cleaning or replacement. Compatible with oil-based ceramic inks and maintenance fluids. Electrical interface includes a 60-pin connector for power, signals, and data. Internal heater and thermistor for ink viscosity control up to 50–55°C. Simplified and precise registration features enable easy alignment and arraying for wider or multi-color printing systems. The printhead supports OEM accessible non-volatile memory and has integrated temperature sensors. Manufactured by Dimatix, made in Japan. Warranty period: 90-days after purchase. Replacement: Requires evaluation by the supplier. Ensure compatibility and professional installation to avoid voiding warranty. Contact us for exact warranty terms and claim process The SG1024/MC model is part of the StarFire series by Fujifilm Dimatix, known for durability and consistent output in challenging industrial environments. Variants like SG1024/MCFL offer different drop size ranges and max productivities but retain the core channel layout and resolution features. Related printheads in the StarFire lineup may differ primarily in drop size range, multi-color capabilities (like 2C or 2-color models), or specialized nozzle configurations but generally maintain the 1024 nozzle count and 400 dpi resolution characteristic of this series. Starfire SG1024/MC printhead is integrated into industrial ceramic printers and specialized production line printers, with Gongzheng being a known compatible brand. These printers are tailored for durable, high-resolution printing using oil-based, UV, and solvent inks mainly in industrial and decorative sectors

Minimum Order: 1 bags

The Spectra Polaris PQ-256 85PL Printhead is a high performance inkjet printhead designed for a broad range of industrial and commercial printing applications. The family of printheads uses field proven materials and a repairable design to deliver a long service life and consistent output. Two Spectra Polaris PQR-256 85PL can make one Spectra Polaris PQ-256 85PL Printhead. This printhead carries a manufacturer warranty. Country of origin : USA We recommend to change the head cables when installing a new printhead.

Minimum Order: 1 bags

The Samba G5L printhead technology delivers the speed, versatility and reliability required for a wide range of demanding graphics and specialty applications. The Samba printhead leverages the accuracy and precision of Silicon MEMS (Si-MEMS) processing with the reliability and life of sputtered PZT in an ingenious parallelogram shape to deliver breathtaking image quality at near analog production speeds. With 2048 individually addressable nozzles, the Samba G5L printhead has 1,200 dpi native resolution (600 dpi in redundant mode) and a native ink drop size of 2.4 picoliters (pl) delivering outstanding print quality that can jet a wide range of fluids including latex, solvent and aqueous inks. Specifications Number of addressable Jets per module: 2048 Print width: 43mm (1.7 in.) per printhead, stitch for infinite print width Native resolution: 1200 dpi/600 dpi in redundant mode Native drop size/largest drop size: 3.5 pl to 13pl Firing frequency: Up to 100Khz Nominal fluid viscosity: 5 to 9 cPs Compatible jetting fluids: AQ, Latex, Solvents, Other Nozzle Plate technology: Silicon MEMS/ Non-wetting coating Printhead heat type: Fluids thermal transfer This printhead carries a manufacturer warranty. Country of origin : Japan

Minimum Order: 1 bags

The Brother GTX Pro White Printhead - SC6197101 is a sensitive and essential spare part for the Brother GTX Pro and GTX Pro B printers, designed specifically for handling white ink with high precision and consistency. It is suitable for use with water-based white inks and offers high-quality piezo printhead technology with a print resolution of 1200 x 1200 dpi. This printhead is crucial for producing consistent and precise application of white ink, which is important for high-quality garment printing. Key points about the Brother GTX Pro White Printhead - SC6197101: It is identified by model numbers such as SC6197101 and SB8571001 for compatibility with GTX423/424 and GTX Pro series printers. The printhead operates with a recirculation system to maintain ink quality and prevent clogging, differing from the original models. The replacement process involves a specific maintenance procedure accessible via the printer’s menu, including steps for cleaning, disconnecting tubes, and reinstallation, often recommended to be done by certified technicians but accessible for tech-savvy users. This printhead is a final sale item, non-returnable and non-exchangeable due to its sensitive nature. In case of issues like "White Head Abnormality," the problem may be due to connection issues or head failure, often requiring a replacement as the ribbon connector is not sold separately. This part is critical for maintaining high-quality white ink printing in direct-to-garment printing with Brother GTX Pro series printers and should be handled carefully during installation or replacement to avoid damage and ensure optimal print performance.

Minimum Order: 1 bags

This Roland VG-540 / VG-640 Printhead - 6000005975 set is suitable for second generation of Roland Truevis VG-540i & VG-640i printers. This is the original Roland part (number 6000006702 replacing 6000005976, 6000003991, 6000003077, 6000003425, 6000002330, 6000004770, 6000005975, 6000004769 & 6000003990). Initially there were two head versions, with short cables (200mm) for SG and some VG printers, and with long cables (250mm) for all later models. This VG-i Assy Inkjet Head 250L - 6000006702 printhead is the long cable version. The Roland VG-540 / VG-640 Printhead - 6000005975 with long cables can be used instead of the one with short cables. This printhead is therefore suitable for all SG and VG models (including SG and VG version 2 and 3). Product Specifications Size: 61.8(W) × 40.5(D) × 23.3(H) mm (2.43" × 1.59" × 0.92") Number of Nozzles: 384 Nozzle spacing (Within a row): 0,1693 mm/row Nozzle spacing (Row to row distance): 0.931 mm Method: Piston pusher with metallic diaphragm plate Temperature Control: No heater or thermistor Drop volume: Binary mode : 3-5pl / Grey-scale mode : 21±2pl *depending on the ink Jetting Frequency: Binary mode : 30kHz / Grey-scale mode : 24kHz Life: 30 billion actuations per nozzle Compatible ink: Aqueous, Solvent We recommend to change the head cables when installing a new printhead. This set includes: 1x head 1x fixing tape 1x 250mm long HF protected (aluminium) head data cable + plastic shields 1x head tube

Minimum Order: 1 bags

Erucamide Erucamide is an excellent slip agent and a good anti-blocking agent for poly- olefins. www.benechemical.ltd It is soluble in toluene, hot ethanol, ether and other organic solvents, insoluble in water. Technical data: ITEM Erucamide Appearance White powder, granular Amide Content, % ≥98.5 Acid Value, mgKOH/g ≤0.2 Iodine Value, gl2/100g 72-78 Color,Gardner ≤2.0 Melting point, °C 77-85 Moisture, % ≤0.2 CAS Number 112-84-5 Application: * Optimal slipping agent, anti-blocking agent and anti-sticking agent for BOPP, PP, CPP, LLDPE, LDPE, EVA, PVC, EEA, and PA film and resins. * Anti-sediment agent, anti-sticking agent, dispersing agent and slipping agent for plastic compound printing inks * Anti-blocking agent for cigarettes film * Lubricant and dispersing agent for toner and color paste; necessary good additive for functional master batch; * Brightening agent, slipping agent and de-filming agent for shoe material and wiring and cable; * Slipping agent, brightening agent and leveling agent for PE thermoplastic powder; * Slipping agent, brightening agent and antistatic agent for thermoplastic elastomer (TPE, TEO, TPU), PP and PA fiber master batch. * Lubricant for photographic materials. Package & Storage: * Net 25kg/bag, craft paper bag with PE inner bag. * Store in a dry room, at the room temperature of below 30°C, cool and well- ventilated place. Under these conditions, the product has a shelf life of 12 months from the manufacture date.

Minimum Order: 1 bags

Vinyl chloride and vinyl isobutyl ether copolymer resin, similer to MP-45,MP-25 benemarket@yahoo.com Product Detail MP-45, MP-25 counter types Product Name: Copolymer of vinyl chloride and vinyl isobutyl ether Specifications: Item MP-25, MP-45 1. Apperance White powder 2. Viscosity, mpa.s 20-30, 40-50 3. Chlorine content, % 44.0 4. Volatile, % 0.50 5. Bulk Density, g/ml 0.30 Usage: appliance paint boat paint building coating car paint electrical insulating varnish plastic coating road marking paint rubber coating

Minimum Order: 1 bags

Vinyl copolymer resin, similer to VYNS-3,VYHH,VYHD, Vinno H40/50 Vinyl terpolymer resin, similer to VMCH, Vinnol H15/45M Vinyl terpolymer resin, similer to VAGH, VAGD, VAGF, VROH, Vinnol E15/40A, Vinnol E22/48A Vinyl chloride and vinyl isobutyl ether copolymer, similer to MP-45,MP-25 benemarket@yahoo.com Vinyl chloride and vinyl acetate terpolymer resin VMCH-1---Dow VMCH Typical applications: marine and metal coatings, cans sealed coatings, aluminum foil varnish, adhesive for staple, shoe adhesive, floor paint, cement paint, silk screen printing and transfer ink. Hydroxyl-Modified Vinyl Chloride and Vinyl Acetate Terpolymer Resin VAGH-1---DOW VAGH VAGD-1---DOW VAGD VROH-1---DOW VROH Typical applications: Polyester gravure inks and anti-steam, boiled inks,wood and metal paint together with PU and Alkyd resin. Flexible packaging and binder in magnetic tape;General metal and container coatings;Wood finishes and paper coatings;Industrial Maintenance;Marine and maintenance coatings. Vinyl chloride and vinyl acetate copolymer resin: CYNS---DOW VYNS-3,Vinnol H11/59 CYHH---DOW VYHH,Vinnol H15/50 CYHD---DOW VYHD, Vinnol H15/42 C40/50---Vinnol H40/50 Our factory is a 22years professional VC-VA terpolymer resin/ vinyl resin manufacturer in China! Our price is competitive one in China! It covers about 50,000 cubic meter, hydroxyl-modified terpolymer vinyl resin VAGH and VAGD counter types output 10,000 MT per year; carboxyl-modified terpolymer resin VMCH, VMCC counter types and VC-VA copolymer vinyl resins counter types output 50,000 MT per year. We have REACH registration and ISO 9001.

Minimum Order: 1 bags

Chlorinated Polypropylene (CPP) Brief Introduction Chlorinated Polypropylene (CPP) is a thermoplastic resin manufactured from polypropylene (PP) through chemical modification. Properties CPP is a nontoxic light yellow granular solid. Depending on the difference of chlorine content, its melting point is generally in the range of 80~160℃ and its decomposition temperature 120~200 ℃. It is easily soluble in some organic solvents like halogenated hydrocarbons, toluene, acetic ether, butanone, etc. and it has high rigidity and good properties of wear-resistance, acid-proof, salt water- tolerance and aging-preventing. Specification Ink Ink-Ⅰ(benzene), Ink-Ⅱ(benezene), Ink-Ⅲ (ester) Chlorine % 29～32, 32～35, >38 Viscosity(25℃mPa.s,) 200~500 Transmittance test ≤0.06 PH value 5.5～7.0 Packing packed in a fiberboard box lined with an internal polyethylene bag. Net weight of each piece is 20 kg.

Minimum Order: 1 bags

Melamine is mainly used for manufacturing melaminoformal dehyde resin, which is well water, heat & arc resistant and bright. It can also be used in decorative laminates, aminoplastics, adhesive agents, coatings and used as a paper reinforcing agent, textile auxiliaries, cement water-reducing agent and leather retaining agent etc.

Minimum Order: 27

TDO is a new kind of reducing agent that used as exchange of sodium hydrosulfite. It is widely used in textile and paper making industry. This product is also used in leather processing industry, paper, pulp and board industry, photographic industry, bleaching and reducing agents. This product is also a component of decolorisation agents. In macromolecule material industry, it is used as catalysis agent and stabilizer of resinic producing, and it is also used in organic synthesization of sensitizing material, and medicine, medical, spicery materials in fine chemicals, and also can be applied in the recycling and separating of heavy metals.

Minimum Order: 27

Dimethylaminopropylamine (DMAPA) is a diamine used in the preparation of some surfactants, such as cocamidopropyl betaine which is an ingredient in many personal care products including soaps, shampoos, and cosmetics. Product name: DMAPA/N,N-3-dimethyl-1,3-propanediamine CAS Number: 109-55-7 EINECS NO.:203-680-9 HS.Code: 2921290090 Molecular Formula: C5H14N2 Purity (%): 99.5% Appearance: Clear and colorless liquid. Packing: 165KG Iron Drums Applications: DMAPA is used as an intermediate in the production of binding agents, ion- exchange materials, flocculating agents (water treatment), cosmetic agents, washing and cleaning agents (betaines), additive for petrol and other fuels, polyurethane fibres and lubricants, dyes, agrochemicals, agents used in the photographic and textile industries, etc. DMAPA is also used directly as al hardener in epoxy resins in the plastics industry, as a cross-linking agent for cellulose fibres in the paper industry and as an anti-shriking agent for leather. DMAPA is an Epoxy hardener. DMAPA reacts with epoxide to form 3D cross-linked thermoset structures. DMAPA is also used for the synthesis of betaines, which are widely employed in personal care products, shampoos, washing and dishwashing detergents. DMAPA is a multifunctional amine used as a building block for lube oil dispersants as well as lubricity improvers and corrosion inhibitors.

Minimum Order: 20 square metres