Computer Hardware & Software

PSE6504G Gigabit Unmanaged PoE Switch, providing 5 10/100/1000/M adaptive RJ45 ports, each port supporting MDI/MDIX automatic flipping function and achieving line speed forwarding. Ports 1-4 have PoE function, support IEEE 802.3af/at standard, can be used as power over Ethernet equipment, can automatically detect and identify the power receiving equipment that meets the standard, and power it through the network cable. PSE6504G is simple and convenient to use, without the need for configuration, plug and play, and can flexibly expand home and office networks without being limited by power line layout. main features • - IEEE 802.3at up to 30W POE port IEEE 802.3at compatible with 2-event classification • - Safety: Low power devices only receive the electricity they need Wireless LAN access points are secure and reliable Automatic detection and protection of non-standard Ethernet terminals • - Supports 10/100/1000Base-T applications • - Supports IEEE802.3x full duplex flow control and Backpressure half duplex flow control. Compact design is perfect for WLAN access Plug and Play without configuration • - Built in power supply

Minimum Order: 1 bags

PSE908EX is a 9-port 100 Mbps unmanaged PoE switch independently developed by Shenzhen Lego Network Technology Co., Ltd. It provides 9 10/100M adaptive RJ45 ports, each of which supports MDI/MDIX automatic flipping function and can achieve line speed forwarding. Ports 1-8 have PoE function, support IEEE802.3af standard, can be used as power over Ethernet equipment, can automatically detect and identify power receiving equipment that meets relevant standards, and supply power to it through network cable. The PSE908EX is simple and convenient to use, without the need for configuration, plug and play, and can flexibly expand home and office networks without being limited by power line layout. • Port performance Provide 9 10/100M adaptive RJ45 ports, ports 1-8 have PoE function, and port 9 can be used as an uplink port, greatly improving the utilization rate of PoE power supply ports; Each port supports MDI/MDIX automatic flipping and self negotiation; Supports IEEE 802.3x full duplex flow control and Backpressure half duplex flow control. • PoE performance Support IEEE802.3af standard; Automatically detect and identify PD devices that comply with IEEE 802.3af standards and provide power to them; Supports 8 ports to achieve IEEE802.3af standard full load (15.4W) power supply, with a total power of 150W; Intelligent power management. If the power of the receiving device exceeds 123W, the system activates a priority mechanism to cut off the power supply to ports with lower priority. • Two working modes Provide mode switching switch, supporting two working modes: "normal switch mode" and "V-LAN mode"; When the standard switching mode is enabled, the switch is a regular non managed switch, and ports 1-9 can communicate with each other; Enable VLAN isolation mode, switch to MTU VLAN, and ports 1-8 can only communicate with port 9 of the uplink port; When enabling video monitoring mode, adjust the switch buffer to adapt to video monitoring applications and enable MTU VLAN.

Minimum Order: 1 bags

GPSE1082S Gigabit unmanaged Poe switch, 8 10/100/1000m adaptive RJ45 ports, 2 Gigabit RJ45 uplink ports, 2 independent gigabit optical SFP ports, 1 ~ 8 ports support Poe power supply, each port supports mdi/mdix automatic turnover function, and realizes line speed forwarding. It supports IEEE 802.3af/at standard, can be used as Ethernet power supply equipment, can automatically detect and identify the power receiving equipment that meets the standard, and supply power to it through the network cable. It is simple and convenient to use, without configuration, plug and play, and can flexibly expand home and office networks without being limited by power line layout. Key Features: -Compliance with IEEE802.3af/at, support full port advance standard detection -Safe: low power devices receive only the power they need -Safe and reliable power to WLAN access points -Automatic detection and protection of Non–standard Ethernet Terminals -Support Auto-MDI/MDI-X -Support Non-Blocking data forward -Support Auto-Negotiation and feature of store-and-forward -Plug-and-Play no configuration required -Internal power supply

Minimum Order: 1 bags

Model: ps1218tg Poe protocol: IEEE 802.3af/at Poe pin: compatible with two power supply modes, 12 / 36-a and 45 / 78-b Port rate: 10 / 100 / 1000Mbps Gigabit Poe separator Ps1218tg complies with IEEE 802.3af/at standard and has a transmission rate of 10 / 100 / 1000Mbps. ● support IEEE 802.3af/at Ethernet power supply standard ● support 10 / 100M and 10 / 100 / 1000m data transmission ● PD power receiving terminal supports 50-57v various voltage transfer, which is convenient for users to use UPS DC power supply ● it can provide 5V / 3.5A, 12V / 2a, 18V / 1A voltage, and adapt to various small network equipment ● circuit isolation protection, effective protection of electrical equipment ● high quality design effectively ensures the stability and reliability of the equipment Ps1218tg separator is an economical and practical Poe remote power receiving device with high performance and high reliability, which is based on IEEE 802.3af/at standard. It can separate the power transmitted through the network cable from the data signal. Ps-1218 can be used with power supply equipment (such as pse808) conforming to IEEE 802.3af and at standards to provide data and power supply for network equipment that does not support Poe at the same time. Ps-1218 can output three voltages of 5V / 12V / 18V. When used with power supply equipment, it can flexibly expand home network and office network without being limited by power line layout.

Minimum Order: 1 bags

Two models: POE5912 and POE5912G Compliant with IEEE 802.3af standard Provide three adjustable voltage outputs of 5V/9V/12VDC Maximum transmission distance up to 100 meters 100 Gigabit Ethernet port Plug and play, no management required The POE5912 separator is an economical, practical, high-performance, and highly reliable PoE remote power receiving device based on the IEEE 802.3af standard, which can separate power and data signals transmitted through network cables. When used in conjunction with power supply devices that comply with IEEE 802.3af standards (such as PSE908EX PSE1816G PSE802G), POE5912 can provide both data and power for network devices that do not support PoE. PoE5912 can output 5V/2A; 9V/1.1A; Three voltages of 12V/1A can be used together with power supply equipment to flexibly expand home network and office network without being restricted by power line layout.

Minimum Order: 1 bags

Model: pse803 characteristic: IEEE 802.3af compliant The maximum transmission power is 15.4W Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required explain: Pse803 single port 100M Ethernet power supply equipment is suitable for indoor use (please put it in a waterproof box outdoors). It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The device can provide a channel of Ethernet equipment, such as router, switch, wireless AP, network telephone, industrial network terminal, network camera, etc., which comply with ieee802.1 The POE power supply application of 3af / at international standard meets the requirements of providing efficient engineering in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment.

Minimum Order: 1 bags

PSE802BT single port Gigabit Ethernet power supply equipment is suitable for indoor use. It can work normally at 100vac ~ 240VAC input voltage. The power supply is connected with the network terminal equipment through super class 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can provide Poe power supply application conforming to ieee802.3af/at/bt international standard for one-way Ethernet equipment, such as advertising machine, small base station, switch, wireless AP, industrial network terminal, network camera, etc. Meet the requirements of providing efficient engineering solutions in places where power cannot be provided at the remote end or where Ethernet network cable power supply is used to improve system reliability and simplify equipment installation.. PSE802BT Features • 4-Pair power up to 90W • IEEE 802.3bt compliant - higher power • compatible with all IEEE 802.3at, 802.3af and legacy power supply devices • safety: low power devices only receive the required power, and 2 pairs of PDS receive power through 2 pairs • Ethernet power supply is safe and reliable • automatic detection and protection of non-standard Ethernet terminals • support for 10/100/1000baset applications • compact design for easy installation of WLAN access points

Minimum Order: 1 bags

PSE-156G IEEE 802.3at compliant The maximum transmission power is 60W Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required An important feature of pse156g is its ability to provide high power on all four pair Poe power supplies and Ethernet cables. Compared with dual core (two pair) products, pse156g can greatly improve performance and efficiency. The four pair Poe power supply enables the pse156g to maintain a low current level of 600mA while providing 60W power. This is in sharp contrast to similar two- wire devices. When providing 60W power, its current level is as high as 1.2A. In view of this, this more efficient pse156g can provide 51w power for PD loss when using CAT5 cable, while it can only provide 30W for two-wire solution. In addition to its 60W operation mode, pse156g can also be used to supply power to two-wire equipment, with a power of up to 30W. In this case, the midspan device still uses all four pairs of CAT5 and above cables, which can reduce the waste of up to 50% of the power on the cable. Compared with the traditional two core solution, the POE system with pse156g can reduce the energy loss by up to 15%.

Minimum Order: 1 bags

PSE801G Non standard Poe design, 48 ~ 56vdc output The maximum transmission power is 30W The maximum power supply distance is 100m Built in power supply, plug and play, no management required Pse801g single port Gigabit Ethernet power supply equipment. The power supply is suitable for indoor use (please put it in a waterproof box outdoors). It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can supply power for one-way Ethernet equipment, such as router, switch, wireless AP, network telephone, industrial network terminal, network camera and other Poe applications, and meet the requirements of providing efficient engineering services in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment

Minimum Order: 1 bags

PSE802G IEEE 802.3at compliant The maximum transmission power is 25.4w Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required Pse802g single port Gigabit Ethernet power supply equipment, The power supply is suitable for indoor use (please put a waterproof box outdoors. It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can be one-way Ethernet equipment, such as router, switch, wireless AP, network telephone and industrial network terminal , network camera, etc. shall be provided in accordance with IEEE802 The POE power supply application of 3af / at international standard meets the requirements of providing efficient engineering in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment.

Minimum Order: 1 bags

IPC-19A is a 19" lcd industrial panel PC, industrial mount all-in-one with J1900 cpu, 4G RAM(Optional 8G), 2.5" SSD/HDD (Size optional), 4 or 8 Gb Ram, a high quality industrial panel pc with 6xCOM(5*RS232,1*RS485) , 1x Parallel ports LPT(SPP/EPP/ECP port), 1280x 1024 lcd screen, resistive touch screen or strengthen glass. 6mm thickness high rugged aluminum panel meet NAME4 /IP65 level. support windows 7/8/10 and linux. Its widely used for the operation, programming, visualization, long-term archiving and simulation of processes in all areas of automation and also with conventional industrial controls. Features 19" SXGA TFT LCD Panel support 1280x1024 pixels 6mm Aluminum front bezel with resitive touch screen Intel Celeron J1900 Quad Core 2.0G CPU Supports Windows XP, Win7/Win8/Win10, Linux 6xCOM(5*RS232,1*RS422/RS485) , 1x LPT, 2x PS/2, 1xVGA, 4xUSB2.0, 2xLAN, 1x Audio, MIC 1* Mini PCIe slot for wifi optional Standard DC 12V input (optional Wide range DC 9-36V input) Panel ( Flush ) mount with clips Standard VESA 75/100mm support stand , wall mount and swing arm Specifications System Processor Intel Celeron J1900 Chipset Intel Bay trail SOC Memory DDR3 4G RAM (Max 8G) Storage 2.5" HDD/ SSD ( Size optional) Graphic Intel HD chipset Ethernet 2 x 100/1000 LAN ports Video 1 x VGA Audio 1x Mic-in and 1x Line-out USB Port 4 x USB 2.0 Serial Port 6*COM(5* RS232,1*RS422/RS485) Parallel ports(LPT) 1 x SPP/EPP/ECP port Keyboard /Mouse 2xPS/2 Power switch 1 x power switch Expansive Slot 1 x Mini PCIe Power supply DC12V input (Optional 8-30V), 100~240V AC , 50/60Hz, external ac adapter Construction Front aluminum bezel(6 mm) and steel chassis LCD display Display Type 19" SXGA TFT LCD(LED backlight) Resolution 1280*1024 Max.color 16.2M Luminance 300 cd/m2 View Angle 170°(H) , 160°(V) Pixel Pitch 0.292 x 0.292 mm Contrast Ratio 1000:1 Response Time 5 ms LCD MTBF 50, 000hrs Touchscreen Type Resistive Touchscreen with internal USB interface controller Resolution Continuous Light Transmission 80% or more Surface hardness 3H Operating Force ≤100g Life Expectancy 35 Millions Environmental Operate temperature -10°C~ 60°C (-14~140°F) Storage temperature -20°C ~ 70°C (-4 ~ 158°F) Storage humidity 5% to 95% @40°C non-condensing Anti-Vibration 17HZ-500 HZ 1G PTP Anti-Shock 1G / peak( 11m sec) Power supply Input 100~240VAC , 50/60Hz, external ac adapter with lockable connector Output DC12V, output 40W Packing info Dimensions (WxHxD) 446 x 371x 79mm Weight Net: 8.0kg , Gross:9.5 kg

Minimum Order: 2 barrels

1.CPU:Mediatek MTK6762 Octa-core Cortex-A53 2.0GHz; 2.Operation System: Android 11.0; 3.Display: 5.5 inch Capacitive Multi-touch screen,IPS HD+ 1440*720 Pixels; 4.4G LTE Networks: GSM: B5/B3/B8/B2=850/1800/900/1900Mhz, 3G WCDMA:B1/B8=2100/900MHZ,4G FDD LTE:B1/B3/B7/B8/B20=2100/1800/2600/900/800Mhz; , 5.Two Cameras: Front 5Mpxls camera, Back 13M+2Mpxls Camera. 6.Memory & Storage: 4GB ram + 64GB ROM; 7.Wireless Network:802.11 a/b/g/n 2.4G+5G Dual-band wifi wireless and Blutooth 5.0; 8.GPS:Support GPS and GLONASS or GPS+Beidou; 9.Battery: 4.4V/4000mAh Lithium Battery; 10.Tri-Proof Rate: IP68 Waterproof and dustproof, DropProof Rate: GIL-STD-810G. 11.Sensors:G-sensor,Light sensor,Proximity sensor,E-Compass, Gyroscope Sensor,ect.; 12.NFC function: Frequency is 13.56MHZ; 13.Dimension: 174*81*14.3mm.

Minimum Order: 2 barrels

YANSEN Solid State Drive Application Industrial and Enterprise SSD In Automation Currently, low-cost industrial control automation based on industrial PC will become the mainstream. Industrial PC mainly includes two types: Industrial Personal Computer(IPC), Compact Peripheral Component Interconnection(PCI) and their derivatives; such as AT96 PC bus industrial computer. Industrial Industrial and Enterprise Solid State Drive Solutions In Vehicle Intelligent transportation is the fusion of automation and communication technology, which provides better traffic conditions through communication and sensing, combined with onboard control devices. Industrial and Enterprise SSD In Surveillance Network surveillance solves the problem of traditional surveillance, effects and changes the traditional connection method, which is simpler and more convenient. but at the same time, it needs larger storage demand and higher bandwidth to match. The storage devices used in video surveillance systems Industrial and Enterprise SSD In AloT With the maturity and advancement of 5G technology, the application of AIoT has been widely promoted, and intelligence has entered a stage of rapid development. High bandwidth and low latency have accelerated the historical process of Industry 4.0. Industrial and Enterprise SSD in Servers This is a test for system and program service providers, as well as supporting hardware. The requirement of capacity, speed, energy consumption and stability of storage schemes is growing rapidly. For servers and cloud computing applications, the value of data is often greater than the value of storage devices Industrial and Enterprise SSD In Cloud Computing Through the construction of cloud computing platform, it is possible to realize pooled management of resources, lightweight and high-availability management of services, effective utilization and monitoring of resources, and efficient utilization of resources and distributed deployment of storage systems. Industrial and Enterprise SSD In Medical The application of industrial-grade SSD and industrial flash memory card in security monitoring has become more and more important with the changes of the times and the rapid development of ssd drive technology. As one of ssd solution suppliers, we have been engaged in solid state drive market and solid state drive industry for many years, if you want to buy our products, please contact us.

Minimum Order: 1 bags

The YSU2 PCIe U.2 3.8TB SSD by Yansen has been designed to deliver superior performance ensuring reliability to fulfill the diverse application requirements. The enhanced capacity of 3.8TB enables the users to store extensive data in one compact PCIe SSD China. It entails the computational storage technology to enhance the data processing speed by increasing the efficiency in data reading. By decreasing excessive data movement the computational storage technology also helps in managing the data locally. To ensure the highest level of expertise in managing a large amount of data, Yansen YSU2 u 2 pcie nvme drive optimizes the hardware and firmware. The focus is to provide ultra-high performance with extended capacity and enhanced reliability. U.2 PCIE YSU2 Specification Flash Type TLC Capacity 800GB~3.84TB Sequential Read Up to 3000MB/s Sequential Write Up to 1700MB/s 4K Random Read 400000 IOPS 4K Random Write 90000 IOPS Operating Temperature 0°C ~ 70°C Storage Temperature -20°C ~ +75°C Humidity 5%-95% RH non-condensing Shock 1500G/0.5ms Vibration 80Hz~2000Hz/20G Operating Voltage DC 12V±7% Power Consumption（MAX） 11W Dimensions L100.2mm*W69.85mm*H15mm ±0.15mm MTBF 2 million hours Warranty 5-year warranty U.2 PCIE YSU2 Features Interface：PCIe Gen3 x 4Lane Low-Density Parity-Check (LDPC) Code Global Wear Leveling Flash bad-block management Flash Translation Layer: Page Mapping Support S.M.A.R.T. Support TRIM Power Loose Protection PLP We can offer kinds of pcie ssd for sale, and the pcie ssd price is reasonable, if you have needs, please contact us.

Minimum Order: 1 bags