Electric & Gasoline Powered Tools

Explosion-proof LED Lighting Fixture, MAML02-A * Enclosure material : Aluminium alloy ZL102 * Transparent cover material : PC , >7J * Ex mark : Ex d IIC T6 Gb; Ex tD A21 IP66 T80°C * Ex certificate: TR CU * Power : 30W, 40W, 50W, 60W, 80W, 100W, 120W, 150W, 180W * Cable entry thread : NPT3/4, M25*1.5, G3/4 ( optional ) * Can be used in hazardous area which includes combustible and dust gas, such as chemical engineering, oil refinery, food processing, oil exploitation, offshore oil platform, tanker, tunnel pipe gallery, military industry, spaceflight , pharmacy, metallurgy, mineral products and etc. * The enclosure is die casting by aluminum alloy, the corrosion-proof performance improved, the surface is high voltage static spraying after shot- blasting and high frequency cleaning. The exposed fastener is stainless steel. Beautiful appearance. * The emergency device can be installed as per client requirements. When supply power cut off, the lighting fixture can be turned into emergency lighting condition. * Wiring with cable or steel tube. What is an explosion-proof light fixture? Explosion proof lighting fixture is lighting fixtures with explosion-proof performance, used in hazardous places where flammable gases and dust exist, and can prevent arcs, sparks and high temperatures that may be generated inside the lamp to ignite flammable gases and dust in the surrounding environment, so as to meet explosion-proof requirements of lamps. There are mainly explosion-proof light fixture, safety explosion-proof lamps, mobile explosion-proof lamps and lanterns. MAM produces customized explosion-proof lighting fixtures and offers a range of explosion-proof products to provide you with all explosion- proof solutions. Scope of application of explosion-proof lamps Explosion proof lighting lamps are suitable for fixed lighting in flammable and explosive places such as petrochemical devices, oil platforms, gas stations, oil pump rooms, transfer stations, pharmaceutical plants, food factories, flour mills, etc.; Zone 1 and Zone 2 explosive gas atmosphere; Flammable dust environment in Zone 21 and Zone 22; The temperature group is T1-T6 environment.

Explosion-proof distribution panel MAMX-02/03 * Enclosure material: Aluminium alloy ZL102; * Ex-marks:  MAMX-02:Ex db IIB+H2 T6...T4 Gb; Ex tb IIIC T80°C...T135°C Db IP66   MAMX- 03:Ex db IIC T6...T4 Gb; Ex tb IIIC T80°C...T135°C Db IP66 * Certificate:ATEX,IECEx and TR CU *Max Current:1500A *Max Power consumption:800W * In-built circuit breaker, AC Contactor, Thermorelay, PLC, Transducer, Soft starter and other components, The panel can install indicator, Pushbutton, Universal switch, Display instrument. * Cable entry * Used in chemical, oil refining, oil exploitation, offshore oil platforms, oil tankers, military and other hazardous areas. * Suitable for controlling the temperature maintenance and the power supply of electric heating in the anti-freezing in hazardous area; Adopting different instruments and program control modules to control the temperature of the heating object so as to meet the requirements of different customers; * Different installation methods such as hanging and floor-mounted installation and different incoming cables such as ordinary rubber and plastic cable, armored cable and heating cable. What is explosion proof panels? The explosion proof control panel is to control and regulate the operation of various equipment and devices in a certain space, suitable for operation in an environment where the concentration of flammable gases, steam, liquids or combustible particles has a risk of fire and explosion, and is often used with junction boxes. MAM offer explosion-proof electrical equipment such as customized explosion-proof control panels and are committed to providing the best explosion-proof solutions. What is explosion proof junction boxes? Explosion-proof junction box is suitable for explosive atmosphere products, mainly to accommodate some ignition sources, terminal blocks and other electrical equipment, characterized by cast aluminum alloy shell, surface spraying, beautiful appearance, explosion proof terminal box is very suitable for use in the need for junction box with a high level of protection and impact resistance in the dangerous area. Why explosion-proof panels and junction boxes are needed? In explosive industrial environments such as dangerous environments such as oil and natural gas, ignition sources can easily trigger the combustion of flammable substances such as vapors, gases, and dust. Such ignition sources include arcs, hot surfaces, aluminum-hot sparks, flames, electromagnetic radiation, smolder deposits and electrostatic sparks, so in this dangerous environment, it is necessary to consider how to protect these ignition sources, and explosion protection is a common protective measure that uses a specially designed enclosure to wrap the digital control panel. For large panels, the purge and pressurization methods isolate them from hazardous environments. The third layer of protection, intrinsically safe, ensures that ignition does not occur by limiting the energy. This protection mechanism ensures that the components of any panel cannot produce enough energy to trigger the combustion of combustible gases.

Xsafe-II Series Automotive Thermal Imaging Night Vision System is an intelligent recognition system developed for advanced driving assistance applications and autonomous driving, which improves driving safety performance by recognizing pedestrians and vehicles and sending early warnings. Resolution: 384×288/640×512 Ingress protection rating: IP69K Operating temperature: -40°C ~ +85°C Features of M3S/M6S Cars with Infrared Night Vision Automotive-grade quality: IATF16949 certification meets the operating temperature and ingress protection rating requirements for automobiles. Special scenario-based non-uniformity correction: This technology prevents image freezing and enables continuous system operation to avoid frozen images, thus constantly protecting drivers. Pedestrian recognition & safety warnings: The system relies on an optimized computer vision algorithm to accurately recognize and distinguish between pedestrians and vehicles and warn for better driving safety performance. Downsized: Small yet powerful, easy to integrate Multiple lenses: Comes with lenses of long, medium, and short focal lengths, suiting perception at various distances and offering multiple choices to onboard application customers. Video of M3S/M6S Infrared Night Vision Camera for Cars Applications of M3S/M6S Infrared Night Vision Camera for Cars Specifications of M3S/M6S Infrared Night Vision Camera for Cars Model M6S M3S Detector Resolution 640×512 384×288 Wavelength Range 8~14 μm 8~14 μm Power Supply Supply Voltage 12V 12V Power Consumption <4.44W (<8.5W, during the operating period of heating wire) <4.08W (<8.5W, during the operating period of heating wire) Environmental Parameters Operating Temperature -40°C~+85°C -40°C~+85°C Ingress Protection Rating IP67 and IP69K (camera terminal) IP67 and IP69K (camera terminal) Lens Replaceable protective window, automatic heating Replaceable protective window, automatic heating Physical Parameters Infrared Camera Dimensions 36.00mm×36.00mm×61.75mm 36.00mm×36.00mm×61.75mm Infrared Camera Weight About 90g About 90g ECU Dimensions 124.00mm×85.00mm×29.00mm 124.00mm×85.00mm×29.00mm ECU Weight 200g 200g If you are looking for a reliable thermal camera manufacturer, please contact us, and we will be your best partner.

Minimum Order: 5 dozens

Helmet mounted thermal imager combines I² and thermal imaging technologies to make up for the shortcomings of the former in detecting targets, suitable for a wider range of applications. Taking the advantages of thermal imaging and I², helmet mounted thermal imager makes targeting more quickly and clearly. Thanks to its small size, it can be mounted on the normal helmets to free your hands in outdoor enforcement and rescue. Types of Helmet Enhanced Thermal Imager Jerry-C Thermal Camera Helmet Jerry-C Thermal Monocular Helmet Mount PHelmet-P Thermal Imaging Helmet Camera PHelmet-P Thermal Imaging Helmet Camera PHelmet-S Night Vision Goggles Head Mount PHelmet-S Night Vision Goggles Head Mount HELMET MOUNTED THERMAL IMAGER FEATURES Low Loading, Fast Installing With the standard interface, it can be mounted on normal helmets quickly. With ultra-light weight and small size, it is stable for long-time front mounting. Fusion Display, Fast Recognition Thermal Imaging and I² imaging can be fitted to display a fusion mode directly without adjustment. There are various modes that gives different emphasize effect for observing targets to improve the recognition and identification efficiency. Multiple Power Supply It supports two kinds power supply: battery and external power supply. You don't have to worry about operating time in wilderness. HELMET MOUNTED THERMAL IMAGER APPLICATION Helmet mounted thermal imager has various color palettes such as black-hot, white-hot, target highlight, that can be used for outdoor night vision, hunting, rescue and enforcement. For outdoor night vision, it can see the animals in darkness, fog, rain, and even other harsh conditions. For hunting, it can help recognize, identify, and locate the target in different environments by various color palettes and modes. For rescue and enforcement, it is light and small to be mounted on the helmet for long time, freeing your hands to rescue and enforce, while multiple display modes improve searching efficiency. As a thermal camera supplier, we will do our best to meet all the needs of customers.

Minimum Order: 5 dozens

thermal scanner handheld M600 Handheld Thermal Camera is high-resolution and manually focused. It is provided with a built-in self-developed 12μm high-performance 640×512 infrared detector and a 5,000,000-pixel visible light camera of 35 mK thermal sensitivity and 30 Hz high frame rate. With its accurate manual focusing function, it can save focusing time and provide accurate data and clear images to meet the requirements of research and analysis work. With its excellent characteristics, Tianxuan M600 Handheld Thermal Camera is the right-hand assistant for engineers in scientific research, professional equipment, and building inspection. Thermal resolution: 640×512 Temperature resolution: 35mK Measurement accuracy: ±2°C Features of M600 Thermal Scanner Handheld 640×512 high-performance temperature measurement core Real 320,000 real-time infrared temperature measurement points + 5,000,000- pixel visible light resolution. High resolution, high frame rate, high accuracy, wide range, all in Tianxuan M600. USB plug and analyze, support full-frame real-time transmission and analysis of temperature information. Advanced interaction function, visible display of temperature result Three-point temperature display, custom point/line/area temperature measurement. Complete analysis data on PC, easy to operate the APP. Built-in 5 image modes+10 color palettes. Support full-frame high/low temperature alarm and timed photographing. Easy-to-use and reliable overall performance Solid and durable, IP54 + 2m-drop protection. Video of M600 Thermal Hand Scanner Specifications of M600 Thermal Hand Scanner Model M600G Detector Type Uncooled VOx IRFPA Detector Resolution 640x512 Spectral range 8-14μm Pixel pitch 12μm Thermal sensitivity/NETD 35mK IFOV 1.31mrad Frame rate 25Hz Focal length 9.1mm FOV 48°x38° Focus mode Manual focus Temperature measurement range -20 ℃～ 150 ℃ , 100 ℃～ 550 ℃ Measurement accuracy ±2% or ±2℃ The Min. measurable temperture difference 0.1°C Measurement  mode Center spot/hot and cold spot tracking and temperature display Custom temperature measurement tools Movable spot/line/area temperature measurement, up to 10 spots, 10 areas,10 lines Temperature measurement  unit Celsius, Fahrenheit, Kelvin Emissivity settings 0.01-1.00，step length 0.01 Ambient temperature settings -10~50℃，setp length 1℃ Distance settings 1-20m，setp length 1m Digital zoom 1×, 2×, 4×, 8× Image mode Thermal, dual-spectrum fusion, visible light, PIP Color palettes 10 kinds Temperature alarm Support Alarm type Image alarm Temperature Scale Auto/Manual Laser Pointer Yes Digital camera 5MP Image/video Storage Jpg images with  temperature data in thermal and visible light modes； H.264 videos without temperature data Voice annotation Yes Language English, Polish, Russian, Korean, Hungarian, Brazilian Portuguese, German, French, Spanish, Italian, Turkish, Traditional Chinese Screen 3.5-inch touch screen（480x640） Image naming Auto/manual input, QR code scanning Memory card standard 32GB MicroSD card Battery type Rechargeable and detachable Lithium battery Power interface USB Type-C Data Communication Interfaces USB, WiFi Charging time about 3h Battery operating time about 3h Power Management Interfaces Auto shutdown: 5 minutes, 10 minutes, 20 minutes, off) Analysis software PC（Infrared analysis software）or mobile （IOS/Android APP） Tripod mounting interface 1/4″-20-UNC Operating temperature range -10~+50°C Storage temperature range -20~+60°C RH 10% ~ 95%,no condensation Drop 2m Encapsulation IP54(IEC 60529) Shock &Vibration Shock 25g(IEC 60068-2-27)；Vibration 2.5g(IEC60068-2-6) Camera Dimension（LxWxH） 258.4 × 105.1 ×102.3mm Weight about 670g Standard accessories 5V 2A power adapter(with various plugs to fit global regions), USB cable, SD card, battery×2, QSG, battery charger, calibration certificate, packaging list,hard transport case As one of thermal imaging camera manufacturers, we will do our best to meet all the needs of customers.

Minimum Order: 5 dozens

Check clearly, solve quickly. Built-in 110,000-pixel VOx infrared detector, optimized circuit, MatrixIII intelligent image processing algorithm, and patented measurement algorithm work together to provide clearer temperature images as well as more accurate and stable temperature measurement data; intelligent touchscreen, manual focusing lens, dual-spectrum, and multiple analysis functions ensure accurate test results and efficient analysis, diagnosis, and processing. Measurement range: -20°C~+550°C Image mode: thermal imaging, thermal fusion, visible light, PIP Infrared resolution: 384×288 Pixel size: 12μm Focal length: 6.2mm Features of M300 Handheld Thermal Imaging Device Better performance makes M300 greater With 384×288 thermal resolution, thermal sensitivity of 0.035℃, and 44 ° FOV, M300 can display rich details that low resolution products cannot, and makes sure the abnormal temperature targets were not missed. Manual focusing provides clear images of targets from far to near, especially for observing tiny near targets. 3.5" LCD HD (640×480) capacitive touch screen, brightness adjustable, easy to observe and analyze. Measurement range up to -20°C~+550°C. From building detection to automotive maintenance, it is adaptive to various scenes and purposes. There is no need to switch equipment, to ersave costs, and improve efficiency. Powerful image fusion function with the 5-megapixel visible light camera provides more comprehensive and richer information, easier for observation under complex conditions. Intelligent analysis. Discover more within the image Support WiFi transmission. After connected to mobile phone APP, it can analyse and share thermal images and temperature data at any time and anywhere. Intelligent PC analysis software supports the resetting of the measurement parameters. Click to form the detection report, convenient for data sorting, analysing, and mining. Professional design, expert's choice, choose to be an expert It supports both screen-touch and button operation. The touch panel is clear to see, easy to use, and convenient to analyse the data. The physical buttons are user-friendly and convenient to operate with gloves. The operation interface is clear and user friendly. It can be easily operated without training. It needs only one button to take photos or videos. Voice annotation is supported to perfectly restore the scene and simplify the complicated work procedures. The large capacity 4500mAh battery in M300 is designed to be quickly detachable. Each M300 is shipped with two batteries and a charging dock, to meet heavy daily usage. 3.5-inch LCD high definition (640×480) capacitive touch screen, with adjustable screen brightness, is more convenient for observation and analysis. Compact and robust design with IP54 protection and 2m dropproof. All these are to ensure you can work without worry. Dual modes support hand-held operation and fixed operation on the tripod, flexible and reliable. Laser pointer can locate targets quickly and accurately, improving inspection efficiency. Built-in high/low-temperature alarm supports user-defined alarm temperature. Video of M300 Handheld Thermal Camera Applications of M300 Handheld IR Camera Specifications of M300 Handheld Thermal Camera Model M300G Detector Type Uncooled VOx IRFPA Detector Resolution 384x288 Spectral range 8-14μm Pixel pitch 12μm Thermal sensitivity/NETD 35mK IFOV 1.98mrad Frame rate 25Hz Focal length 6.2mm FOV 43.7°x31.9° Focus mode Manual focus Temperature measurement range -20 ℃～ 150 ℃, 100 ℃～ 550 ℃ Measurement accuracy ±2% or ±2℃ The Min. measurable temperature difference 0.1°C Measurement  mode Center spot/hot and cold spot tracking and temperature display Custom temperature measurement tools Movable spot/line/area temperature measurement, up to 8 spots, 8 areas, 8 lines Temperature measurement  unit Celsius, Fahrenheit, Kelvin Emissivity settings 0.01-1.00, setp length 0.01 Ambient temperature settings -10~50℃, setp length 1℃ Distance settings 1-20m, setp length 1m Digital zoom 1×, 2×, 4× Image mode Thermal, dual-spectrum fusion, visible light, PIP Color palettes 7 kinds Temperature alarm Support Alarm type Image alarm Temperature Scale Auto/Manual Laser Pointer Yes Digital camera 5MP Image/video Storage Jpg images with  temperature data in thermal and visible light modes； H.264 videos without temperature data Voice annotation Yes Language English, Polish, Russian, Korean, Hungarian, Brazilian Portuguese, German, French, Spanish, Italian, Turkish, Traditional Chinese Screen 3.5-inch touch screen（480x640） Image naming Auto/manual input, QR code scanning Memory card standard 32GB MicroSD card Battery type Rechargeable and detachable Lithium battery Power interface USB Type-C Data Communication Interfaces USB, WiFi Charging time about 3h Battery operating time about 4h Power Management Interfaces Auto shutdown: 5 minutes, 10 minutes, 20 minutes, off) Analysis software PC（Infrared analysis software）or mobile （IOS/Android APP） Tripod mounting interface 1/4″-20-UNC Operating temperature range -10~+50°C Storage temperature range -20~+60°C RH 10% ~ 95%, no condensation Drop 2m Encapsulation IP54(IEC 60529) Shock &Vibration Shock 25g(IEC 60068-2-27)；Vibration 2.5g(IEC60068-2-6) Camera Dimension（LxWxH） 258.4 ×105.1 × 102.3mm Weight about 670g Standard accessories 5V 2A power adapter(with various plugs to fit global regions), USB cable, SD card, battery×2, QSG, battery charger, calibration certificate, packaging list, hard transport case If you want to know more kinds of industrial wireless temperature monitoring system, please visit our website. InfiRay® is a developing and manufacturing company that devotes in infrared and thermal imaging industry. Our products and solutions are competitive for professional use thanks to their completely independent intellectual properties. Infrared detectors, thermal camera cores and modules, and thermal cameras and imagers for terminal applications are our major products, which have been sold to 89 countries and regions all over the world.

Minimum Order: 5 dozens

LT Series Temperature Measurement Uncooled Thermal Module has more stable and reliable temperature measurement performance than others in the industry. It provides uncompatible high-definition image, and its better electrical performance and richer data application interfaces are very suitable for application scenarios that have strict requirements on the core of infrared thermal imaging. High temperature measurement performance, accuracy up to ±0.5°C (with black body ±0.3°C), to meet various future needs. Various electrical properties, rich interfaces, and wide application range. Professional software support to improve development efficiency. Features of LT 384H/640H Temperature Sensing Camera High performance to meet various future demands Self-developed high-performance, high-resolution, and high-sensitivity Vox detector Wide temperature measurement range (-20°C~+550°C) allows monitoring of industrial targets with high-temperature requirements. Real-time full-frame temperature output with measurement accuracy up to ±0.5°C (±0.3°C with blackbody) ensures high accuracy. Working with patented intelligent temperature measurement algorithms, the two calibration modes, manual and automatic, ensure the measurement accuracy and help improve efficiency. Lenses with varying focal lengths are available for use either in space-limited areas or for monitoring small targets. Quality infrared images are output to meet detection requirements. Diversified electrical characteristics and rich interfaces for wide application scope It is compact, lightweight, and easy to install in space-limited areas, without load generated to the detected equipment. Standard USB ports (optional) are supported to transmit on-site temperature data in real time without complex wiring at the back-end. Support multiple image and temperature output interfaces, enabling fast image and temperature data transmission and improving efficiency. Professional software support for higher development efficiency Windows/Linux/Android SDKs are provided for users' secondary development, which is practical and benefits the users. Professional analysis software can show measurement results for more points, lines, and areas. Isothermal analysis, high-temperature alarm, and other functions simplify data acquisition at the back-end and facilitate more flexible applications with reduced cost. Video of LT 384H/640H Temperature Sensing Camera Applications of LT 384H/640H Temperature Sensing Camera Specifications of LT 384H/640H Temperature Sensing Camera Model LT384H LT640H Detectors Detector Type VOx Uncooled Infrared FPA Detector Resolution 384×288 640×512 Pixel Pitch 17μm 14μm Frame Rate 50Hz 25Hz Response Spectra 8～14μm Image Adjustment Brightness, Contrast Adjustment Manual/Auto0（default）/Auto1 Polarity Black hot/white hot Palette Options for 18 palettes Digital Zoom 1.0~8.0×Continuous zoom（step length 0.1） Image Flip Left and right/up and down/diagonal Selection Interested Area available Image Processing Non-uniformity correction Digital Filter and Imaging Denoising Digital detail enhancement Temperature Measurement Function Measuring Range 0℃~60℃ Measurement Accuracy ±0.5℃@target temperature of 33℃~42℃； ±1.0℃@ target temperature of 20℃~33℃； ±1.0℃@ target temperature of 42℃~50℃ Measurement Tools 10 fixed spots can be set Highest/lowest temperature capture in the full screen Center temperature capture 12 lines/areas analysis tools 1 isotherm analysis tools Temperature Correction Manual/Auto Power Supply Supply Voltage 4～6VDC Expansion components support 5～24VDC Typical Supply Voltage 4VDC Expansion components support 12VDC Power Protection Over-voltage/Under-voltage/Reverse Connection Typical Consumption @25℃ Without expansion components ＜1.4W With expansion components ＜1.7W Interface Video Output Analog video One channel PAL or NTSC Digital video BT.656 BT.1120 14 bit or 10bit LVCMOS 14 bit or 10bit LVDS Expansion Component USB3.0/LAN/CameraLink/ LVDS/LVCMOS Serial Communication Interface RS-232 UART（3.3V） Physical characteristics Weight (without lens)（cores with network board excluded） ＜90g Size (without lens) (cores with network board excluded) 44.5mm × 43mm（W×H） Environmental Adaptation Operating Temperature -10℃~60℃（18℃~25℃for accurate temperature measuring） Storage Temperature -40℃～+80℃ Humidity 5~90%，non-condensation Vibration 4.3g, random vibration, all axial Shock 40g,11ms, final peak sawtooth wave, 3 axial 6 direction Now the price of thermal body temperature measurement system is affordable, if you have needs, please contact us. As a thermal scanner manufacturer, we will do our best to meet all the needs of customers.

Minimum Order: 5 dozens

Smarter machine vision -20°C~+550°C wide temperature measurement range allows monitoring of industrial targets with high-temperature requirements. High accuracy ensured by real-time full-frame temperature output with measurement accuracy up to ±2°C or ±2% of the reading. With a dimension of 44.5×43 mm, it is compact and lightweight, easy to install in space-limited areas. Features of LT384/640/1280 Uncooled Thermal Imaging Camera Module High performance to meet various future demands Self-developed VOx detector with high frame rate, high pixel, and high sensitivity. Its wide temperature measurement range (-20°C~+550°C) allows monitoring of industrial targets with high-temperature requirements. Real-time full-frame temperature output with measurement accuracy up to ±2°C or ±2% of the reading ensures high accuracy. Working with patented intelligent temperature measurement algorithms, the two calibration modes, manual and automatic, help improve efficiency. Lenses with varying focal lengths are available for use either in space-limited areas or for monitoring small targets. Quality infrared images are output to meet detection requirements. Diversified electrical characteristics and rich interfaces for wide application scope It is compact, lightweight, and easy to install in space-limited areas, without load generated to the detected equipment. Standard USB interface is supported (optional) to transmit site temperature data in real time without complex wiring at the back-end. It also supports multiple image and temperature output interfaces, enabling fast data transmission and improving efficiency. Professional software support for higher developing efficiency Windows/Linux/Android SDK development kits are provided for users' secondary development. This is practical and benefits the users. Professional analysis software can show measurement results in more points, lines, and areas. Isothermal analysis, high-temperature alarm, and other functions simplify data acquisition at the back-end and facilitate more flexible applications with reduced cost. Applications of LT384/640/1280 Uncooled Thermal Imaging Module Specifications of LT384/640/1280 Uncooled Thermal Imaging Module Model LT640 LT640P LT384 Performance Indicator Detector Type Uncooled VOx infrared focal plane detector Resolution 640×512 640×512 384×288 Pixel Size 14μm 12μm 17μm Frame Rate 30Hz 30Hz 50Hz Spectral Band 8~14μm Image Adjustment Brightness and Contrast Adjustment Manual/Auto 0 (default)/Auto 1 Palette 18 types Digital Zoom 1.0~8.0× continuous zoom (step size: 0.1) Image Processing Non-uniformity correction, digital filtering noise reduction, digital detail enhancement Temperature Measurement Measurement Range -20°C~+150°C，0°C~+550°C Gain Mode Switching High gain/Low gain/Automatic switching Measurement Accuracy ±2°C or 2% of the reading (The greater shall prevail) @ambient temperature –20°C~+60°C Measurement Tool 10 settable fixed points/Full-screen high and low temperature capture/Full-frame temperature measurement/Center point temperature measurement/Analysis for 12 lines or areas/Isothermal analysis Lens Lens 4m, 5.8mm, 6.2mm, 9.7mm, 13mm, 19mm, 25mm, 35mm, 50mm Power Supply Power Supply Range USB: 5V DC/5-24V DC supported by user extension component Typical Service Voltage 4V DC/12V DC supported by user extension component Power Protection Overvoltage, undervoltage, and reverse connection protection supported by user extension component Typical Power Consumption @ 25ºC <2W Interface Analog Video 1-channel PAL/NTSC system Digital Video USB，14 bit or 10 bit LVDS-H/F Serial Communication Interface RS-232/UART(3.3V) Physical Characteristics Weight (without lens) <76g Dimensions (without lens) 44.5mm×43mm Environment Adaptability Operating Temperature -40°C~+80°C Storage Temperature -45°C~+85°C Vibration 4.3g, random vibration, all axes Impact 40g, 11ms, final peak sawtooth wave, three axes, and six directions Humidity 5~95%, non-condensing There are many infrared camera manufacturers in China, but we are one of the best choices for you.

Minimum Order: 5 dozens

Jerry C Clip-on Thermal Imager has removable wide-angle HD lens and multiple display modes to deliver better environment sensing performance. Resolution: 640×512 Pixel size: 12μm Features of Jerry-C Thermal Monocular Helmet Mount Ceramic packaged HD thermal imaging. Latest 12μm HD infrared module, stronger, lighter, and smaller. Ultra-low load, quick installation, and uninstallation. Quick removal interface allows plug-and-play infrared fusion function. Fusion display and threat recognition. Multiple application modes facilitate hot target searching and displaying, helping users to grasp the initiative. Video of Jerry-C Thermal Monocular Helmet Mount Applications of Jerry-C Thermal Monocular Helmet Mount Jerry-C Thermal Monocular Helmet Mount Applications Specifications of Jerry-C Thermal Monocular Helmet Mount Detector Type Uncooled VOx infrared detector Detector Resolution 640×512 Pixel Size 12μm FOV 30.5 View Ratio (40° night vision device) 0.765 Display Mode Manual/Automatic Image Mode White-hot/Highlight/Outline Power Supply 17335,18650 Weight 78g/110g Interface External power supply/Analog video (PAL)/RS232 Operating Temperature -40°C~+60°C Ingress Protection Rating IP67 As a reliable ir camera supplier, we can offer kinds of related products for sale, if you have needs, please contact us.

Minimum Order: 5 dozens

Acrel smart geteway currently include AWT100 wireless communication terminal, ANet smart gateway. these products mainly realizes the function of the Internet of Things, and collects and uploads various forms of energy data of water, electricity, gas, oil, cold and heat to a specific industrial iot cloud platform. Smart Gateway For Sale Wireless communication, Real-time monitoring, remote cloud based energy monitoring and control, IOT. How Does Smart Gateway Work? Acrel smart gateway is mainly used to assist RS485/lora equipment in networking. By transmitting communication data between RS485 signals and wireless signals, the wireless communication of common RS485/lora equipment is completed and the IOT function is realized. Reduce the construction cost and transformation time of the user's communication network, the product has the advantages of small size, stable communication, long transmission distance, convenient installation, etc. What Is The Difference Between A Gateway And A Router?  Communication The gateway can be 3G, 4G and WiFi, etc., with various forms of communication. There are only two ways to use the router, Ethernet and 3G. 01  Functional aspects The gateway is mainly used for industrial equipment, which has high usage cost and higher maintenance and debugging cost, but it is very efficient for data collection and management. Routers don't have this feature. 02  Network structure The gateway can transmit data in a variety of ways, and the router can only connect to the monitoring place with a stable IP and domain name through the 3G network. 03  Stable performance The gateway is more stability, it is not easy to fail, and it is very stable in use. but router has many types. If you want to know more types of professional energy management software solutions , please visit our website. We can also offer kinds of dc voltage monitoring system and ac voltage monitoring system for sale, if you have needs, please contact us. Acrel has a multiple function IoT energy efficiency management system product test centre (CNAS certified), which can carry out a variety of tests on the environment, electromagnetic compatibility, safety and reliability. The iot cloud system products production relies on the advanced information management system and strictly follows the ISO9001 management standard, which provides a guarantee for industrialization and large-scale implementation of the products. The annual capacity of the electrical meter is 3 million sets, 2.5 million power transformers and 20,000 sets of energy-saving cabinets.

Minimum Order: 1 bags

Acrel power transducer is designed for industrial electrical measurement of low voltage system, include current transformer, hall effect current sensor, rogowski current transducer , power transducer and analog signal isolator. High accuracy with CE/IEC standard. Acrel power sensor contributes to providing innovative and high quality solutions for measuring electrical parameters. Power Sensor For Sale Power sensor features novel structure, beautiful appearance, convenient installation, small volume, high accuracy with CE/IEC standard, large capacity, solid shell welding and good sealing performance.Varies types can be selected for different suitation. Acrel Power Sensor Working Principle What is Power Sensor Working Principle? Power sensor is an electirc detection device, can feel the information of measured electric quantity, and can detect the information, according to certain rules into electrical signals or other required forms of information output, to meet the requirements of information transmission, processing, storage, display, recording and control. It is the first step to realize automatic detection and automatic control. Power sensor is also a device that will be measured electric parameters (such as current, voltage, power, frequency, power factor and other signals) into DC current, DC voltage and isolated output analog signals or digital signals. Acrel Power Sensor FAQs Q What is a power sensor?  A Power sensor will meausre electric quantity parameters (such as current, voltage, power, frequency, power factor and other signals) into AC/DC current, DC voltage and isolated output analog signal or digital signal. Q How many types of power sensor?  A Current transformer, hall effect current sensor, current transducer, power transducer and analog signal isolator. Q How to choose sutiable power sensor?  A Accronding to your input signal, output signal and power supply, cable or busbar. Q How does a power sensor install?  A Cover the cable or busbar, din rail type,etc. Now the hall sensor price is affordable, if you have needs to buy a hall effect sensor, please contact us. We can provide different types of voltage transmitter, voltage transducer,voltage isolator for sale, if you are interested, please leave us a message.

Minimum Order: 1 bags

Acrel new Multi Circuit Energy Meter is mainly used in solar PV system and EV charger. Nowadays, the world advocates a green, environmentally friendly and low-carbon lifestyle. The photovoltaic and electric vehicle industries are developing rapidly. Acrel new energy device provides electrical measurement and safety guarantees for these industries. New Energy Device For Solar System Suitable for solar pv system, from solar panel to solar inverter, include ac and dc measure. Advantages Of Solar Energy And Disadvantages Of Solar Energy  Advantage 1. Energy independence The solar system can continue to generate electricity in an emergency. 2. Save electricity bills Efficient use of solar energy to generate electricity can save a lot of electricity bills when used at home. 3. Sustainability Oil and gas are unsustainable energy sources, solar energy is sustainable by comparison 4. Low maintenance cost Solar photovoltaic panels do not have many complicated electrical components and have a long lifespan, so they rarely fail or require constant maintenance to keep them running optimally. 01  Disadvantage 1. Low conversion efficiency Since the photoelectric conversion efficiency is too low, the power density of photovoltaic power generation is low, and it is difficult to form a high-power power generation system. 2. Intermittent work On the earth's surface, photovoltaic power generation systems can only generate electricity during the day, which does not match people's electricity needs. 3. It is greatly affected by climatic and environmental factors The energy of solar photovoltaic power generation comes directly from sunlight, which is greatly affected by the climate. 02 What Solar Energy Equipment Do I Need To Go Solar? In the photovoltaic system, it is mainly composed of solar panels, inverters, storage batteries and monitoring equipment. Acrel provides monitoring equipment for photovoltaic systems, such as solar energy meter, including the collection device of solar panels, AC and DC signal measurement at the front and back ends of the inverter, and the front end of the power grid. Anti-backflow monitoring device. Solar Energy Basics Solar photovoltaic system, also known as photovoltaic, refers to a facility that uses the photovoltaic effect of photovoltaic semiconductor materials to convert solar energy into direct current electricity. The heart of a photovoltaic facility is the solar panel. The semiconductor materials used for power generation mainly include: monocrystalline silicon, polycrystalline silicon, amorphous silicon and cadmium telluride. As countries have been actively promoting the application of renewable energy in recent years, the photovoltaic industry has developed rapidly As one of iot paas providers, we can offer kinds of power quality measuring devices and insulation monitoring device abb for sale, if you have needs, please contact us. If you want to know more about arduino iot cloud components and medical isolated power supply , please visit our website.

Minimum Order: 1 bags

Acrel power quality device is mainly used for power supply and distribution equipment at the user end, and provides power quality improvement equipment (such as active filters, reactive power compensation equipment, etc.) to help improve user power quality and make users more economical, safe and reliable. Power Quality Device For Sale Reactive Power Compensation, Harmonic Control and Protection, Harmonic Suppression and Capacitance Compensation. What Is Power Quality Device Used For? The power quality device is mainly used to control the three-phase unbalance of the distribution network.  Power systems that require comprehensive compensation for reactive power, harmonics and three-phase unbalance. 01  Power systems that are sensitive to grid voltage fluctuations and flicker, such as precision textiles. 02  Remote areas with poor electricity consumption, such as rural areas, mountainous areas, wind farms, etc. 03  Manufacturers using high-power shock loads and nonlinear loads (such as air pumps, etc.) 04  Low Momentum Factor area 05  Electricity systems, such as factories, enterprises, etc 06  Power systems that require high power quality, such as hospitals, etc. 07  The field of electrolysis industry using special AC voltage. 08 Measuring Power Quality  The APF active power filter is connected in parallel in the low-voltage power distribution system with harmonic loads, which can quickly track and compensate the dynamic harmonic current in real time. 01  The SVG static var generator can quickly and continuously compensate the reactive power and negative sequence of varying sizes, and manage the three- phase unbalance 02  The hybrid dynamic filter compensation device is connected to the power distribution system in parallel, which can control the harmonics of the system while compensating for reactive power. 03 Why Is Good Power Quality Necessary? Improving power quality is of great significance to the safety and economic operation of power grids, as well as reducing energy consumption.  Improve the power factor of the user end, reduce reactive power consumption, and reduce electricity bills. 01  Eliminate the harmonic pollution of the power system, delay the aging of the cable insulation, reduce the heat loss of the equipment caused by the harmonics, and increase the service life of the equipment. 02  Avoid compensation capacitor tripping accident, resulting in damage to components. 03  Eliminate the malfunction of protection equipment and inaccurate measurement of measuring instruments caused by harmonics. 04  Alleviate the three-phase unbalance problem in the system and effectively reduce the loss of transformers and lines. 05  Reduce the current of the neutral line, reduce the operating temperature of the distribution transformer, and reduce heat loss. 06  Slow down the insulation aging of the cable and avoid accidents caused by it. We can offer kinds of wireless temp monitoring system, transmission line monitoring system, real time power monitoring system, low voltage monitoring system, building power monitoring system, monitoring pv systems for clients, if you have needs, please contact us. More applications of remote temperature and humidity monitoring system, please visit our website. Now the price of electrical monitoring device is not high, if you are interested, please leave us a message.

Minimum Order: 1 bags

Acrel Isolated power systems are mainly used in the medical and industrial sectors. The medical IT system is mainly designed for the large threat to the patient's life caused by the leakage current. The industrial IT system is mainly used to monitor the insulation condition of the system to the ground in real time because the leakage current poses a threat to the safety of some industrial production. Isolated Power Systems For Sale Isolated power distribution system is suitable for important places such as hospital operating rooms, ICU (CCU) intensive care units, and industrial fields such as: electrolytic aluminum, mines, glass factories, electric furnaces and test equipment, metallurgical plants, chemical plants, explosion-hazardous places, computer centers and emergency In AC and DC ungrounded systems such as power supplies. Isolated Power System Explained In the medical IT system, the AITR series medical isolation transformer is the core of the system. It is used with the AIM series insulation monitor to monitor the insulation status of the IT system to the ground. When an insulation fault occurs, the AID series alarm and display instrument will remotely display and Sound and light alarm, at the same time ASG test signal generator and AIL insulation fault locator will locate the location of the fault, so as to cut off the fault circuit in time and accurately. Isolated vs. Non-Isolated Power Supply  Different risk of electric shock A. Non-isolated power supply: There is a direct connection between the load end and the input end, which will introduce the high voltage of the AC power supply to the load end, thereby causing the danger of electric shock. B. Isolated power supply: The load terminal and the input terminal are indirectly connected, so there is no danger of electric shock when touching the load. 01  The driving efficiency is different A. Non-isolated power supply: The driving efficiency is high, and the voltage range is 110-300V. B. Isolated power supply: The drive efficiency is low, and the voltage range is 60V-300V. 02  The cost is different A. Non-isolated power supply: The circuit structure used is a DC/DC boost or buck circuit scheme, the circuit is simpler and the cost is lower. B. Isolated power supply: The circuit structure used is an AC/DC flyback circuit scheme, which is complicated and expensive. 03 How Does An Isolated Power Supply Work? Medical isolation power system (ie medical IT system), also known as power distribution system with ungrounded neutral point. The power supply side of the system has no working grounding or is grounded through high impedance, and grounding protection is performed on the load side. Therefore, when the first leakage fault occurs, the leakage current is small and will not generate a large contact voltage to threaten personal safety. Therefore, It is not necessary to cut off the power supply, so that the medical equipment can continue to work, and at the same time, the alarm device is used to remind the staff to check and eliminate the fault in time. Now the remote monitoring system for solar power plant price is reasonable, if you need professional solar plant remote monitoring system , power theft monitoring system , power monitoring and control system and power distribution monitoring system, please leave us a message. If you want to know more details of solar pv scada system, please visit our website.

Minimum Order: 1 bags