Consumer Electronics - Others

The RFID reader is an automatic identification device that can read the data of electronic tags. According to the different readings, tag frequency is divided into low frequency, high frequency, ultra-high frequency reader. RFID reader needs to be equipped with an RFID antenna to read tag information. DTB RFID Reader Production RFID Desktop Reader Key Features: Virtual USB COM interface, micro USB connector Compliant with ISO/IEC14443-4 Type A/B, ISO/IEC15693 international Standard; Available working model of reading/Write or Read UID only; Bluetooth RFID Reader Description of RFID Bluetooth ReaderTo fulfill the requirements of the customers for E-wallet, E-commerce applications, this Bluetooth reader supports ISO14443-A or ISO18092 or ISO15693. The Principle of RFID Technology The basic working principle of RFID technology is not complicated: the Tag into the magnetic field, after receiving the rf signal from the reader, with the energy gained by the induced current send product information stored in the chip (Passive Tag, Passive tags or Passive tags), or take the initiative to send a frequency signal (Active Tag, Active Tag or Active);After reading and decoding the information, the reader sends it to the central information system for relevant data processing. The RFID label reader: The basic information carrier of the measured object is the electronic RFID card tag, which has two types. The other type is passive, which has no power source of its own and is supplied by an external power. So who's going to power it? It's the card reader in the RFID system. It is a radio frequency transceiver that, once in operation, emits an am signal to activate the electronic tag. In the case of a passive electronic tag, it has to be transmitted power. Of course, the transmission of electrical energy is limited by many external conditions. Two Types of Readers: Desktop Reader and Bluetooth Reader Desktop Reader is an ID/ IC reader for both 125KHz and 13.56MHz dual-band. Adopt advanced plug and play, no-drive USB connection technology. By simulating the keyboard output mode, the card number of RFID card can be obtained by swiping card, which is simple and stable. At present, Desktop Reader has been widely used in data entry, information inquiry, Internet bar registration, book lending, conference check-in, and access control. The Bluetooth RFID reader device is characterized by its read/ write functions, Bluetooth communications, and battery charging management function, etc. To fulfill the requirements of the customers for E-commerce application, this Bluetooth reader supports ISO 14443-A or ISO 18092 or ISO 15693. DTB RFID is a rfid china manufacturers, we provide mifare classic 1k reader, mifare 1k reader, mifare 1k card reader, rain rfid reader ic, rfid bracelet reader, cell phone rfid reader, price rfid reader, long rfid reader and etc. Want to know more? Please contact us.

Minimum Order: 10 long tons

Having a good quadcopter frame is just as important as having good electronics, as drone depend on lightweight, sturdy hulls for mounting components. There are limitless frame designs that vary in shapes, materials and dimensions. Stiffer frames result in better flight characteristics since less bending and warping can occur, meaning your quadcopter will be able to have a smooth and stable flight. One of the materials of mini quad frame that is most common for drone frames is carbon fiber. These frames of fpv kit drone are great for drones because of their physical properties which makes them perfectly suited for the hobby. The most common drone categories are aerial cinematography, sport, sport FPV, mini, and diy drone frame FPV. All of them will need a different frame, from aerial cinematography quadcopters that will need tall landing gear and be large enough to lift a high quality camera, to sport quadcopters that are very light weight, fast, and have extremely responsive control. When you have finally picked the right mini quadcopter frame, it’s always a good idea to ensure that you know how you are going to mount the flight controller. This is because certain flight controller boards come with cases that allow you to use double sided sticky tape so you can mount it to any frame, because, most boards only have mounting holes. Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as custom drone frame. Want to know the drone kit price or more? Please contact us.

Choosing a best drone esc combo is a combination of science, guess-work, and magic! Here is a process to select the "right" motor, ESC and battery. (1) Estimate the AUW ("All-Up-Weight") of the plane; (2) Select a motor and propeller with (a) the proper thrust, and/or (b) the proper power, given the estimated AUW; (3) Determine the battery voltage compatible with the motor; (4) Determine what flight times you want; (5) Select a battery with the desired voltage and capacity; (7) Determine the resulting current flow in Amps; and (6) Select an ESC compatible with motor type (brush or brushless motor), and battery type (NiCD, NiMH and/or Li-poly) that can handle the maximum current your motor and prop will draw. After selecting a motor, the next logical step is to select a brushless electronic speed controller (ESC) that matches your motor. The motor will have an Amp (A) rating, quadcopter ESC is good general practice to select an ESC rated for 30 percent or 10A more than the max current draw of your motor. Say I have a motor that pulls 10 amps. I do not want to buy an ESC that is rated for 10 amps. I would want to get an ESC that is rated for 15 or 18 amps. It is always good to go higher. The higher amp-rated ESC you get the less heat will be radiated. Speaking of heat, this ESC can get very warm at times! That's why it is important to get an ESC with an amperage rating higher than your motor or your motor will pull too many amps through the ESC and cause the ESC to overheat and possible catch fire. Brushless Speed Controller ESC Types For base on motor, ESC can be divided into brushed and brushless. It according to the control signal to adjust the speed of the motor. #1 Brushed and brushless For their connection, control ESC usually goes like this: The ESC input line connected to the battery; The output of the ESC line (brushed have two lines, brushless have three lines) connected to the motor; ESC signal lines connected to the receiver. Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as DIY components for drones.

The next part of your drone is your esc battery. Modern RC drones use lipo batteries, which have a good power to weight ratio and can discharge a large amount of current very quickly. Choosing the correct Lipo RC quadcopter battery for your drone involves many factors, and you must first have an idea of the voltage and amp requirements of the motor/prop combination that you intend to use. There are a number of factors to consider when it comes to choosing a battery pack. Before making a purchase, think about these points: * Voltage * Capacity * Weight * Physical Size * Connector * Discharge * Charging Rate Lipo Drone Battery Voltage (S) All Lithium Polymer cells have a nominal voltage of 3.7v per cell. When fully charged a LiPo cell should be 4.2v and when discharged it should never be below 3v. You will notice that LiPo packs are made up of layers of multiple cells. A 1S = 1 cell (3.7v). If the LiPo pack is listed as being 3S this means it is 3 cells x 3.7v (per cell) which is 11.1v (3s 11.1v lipo battery). It has 3 layers of 3.7v each. The rating for each cell is always referenced by its nominal voltage (3.7v), NOT the maximum voltage (4.2v). Capacity (mAh) This is usually the biggest or most obvious rating shown on the LiPo pack and is measured in mAh (Milliamp/hour) or Ah(Amp/hour). The capacity is an important factor to consider. Think of capacity (mAh) as the amount of fuel in your car’s fuel tank. A higher capacity tank will run your car for longer. 55 amps is the maximum safe current a motor can draw from this battery. The mah rating: 2200mAh is 2200 milliamp hours or 2.2 amp hours. That is the amout of energy the battery can hold. This battery will give 2.2 amps of current for one hour. Or 4.4 amps for 1/2 hour, or 8.8 amps for 15 minutes. Weight A 25c 2000mah Lipo battery can weigh from 170 grams to 270 grams. When you look to buy a battery, weight should be one of the thins you look at. Some 1600mah batteries weigh as much as some 2200mah batteries. A batteris has a huge effect on the planes power to weight ratio. Two extra ounces will make a big difference in your planes performance. Physical Size of TTF Longest Lasting Drone Battery For a battery to be right for your model it must fit within the model’s battery compartment. Not all batteries are the same size. While most manufacturers try to stay consistent in sizing, the dimensions can still be quite a bit different. Sometimes a 2mm difference in size might keep it from fitting in your model. Discharge (C) Discharge is the amount of power the battery can supply your power system. The ‘C’ rating is an multiplication of the capacity. Example: A 20C battery can discharge at 20 x 2,000mAh which is 40,000mAh or 40Amps. This is an important number to consider. It’s always good to use a wattmeter to measure the demand of your system. The millamp hours divided by 1000, times the C rating, equals the maximum continuous discharge amperage the battery is capable of sustaining. That’s mah/1000 x C = Amps. So 2200mah/1000 x 25C = 55Amps. The Charge Rate Some batteries will display a ‘C’ rating for charging. MOST batteries are rated at a 1C charge rate. The formula is this: XXXX mAh / 1000 x (Charging C rating) = XX amps For example: If you had a 2200mAh LiPo pack with a charge rating of 2C you would not want to charge the battery at rate more than 4.4 amps. It’s the lower amperage you charge your batteries, the longer they will take to charge. However, a slower charge is always better for the health of your battery. If you have the time… take it slow. If you can’t find charge rating on your battery, then play it safe and charge at 1C. Hard or soft? Normally LiPo batteries come in two different forms: as soldered packs wrapped in shrink wrap or as so called hardcase packs that feature an outer plastic box to protect the cells. If you just bash or race non-sanctioned races softcase (shrink-wrapped) packs are ok as long as you make sure that there is no possibility to damage them during use. Damage can be done by rocks, stones, wood and basically everything that you can find off-road. In this case hardcase packs are the way to go. When your model is equipped with an enclosed diy drone battery compartment shrink- wrapped are ok too. Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as DIY components for drones.

AG Drone T1 Flight Controller Autonomous operation Terrain following High positioning accuracy Low voltage alarm Pesticides monitoring AG Drone T1 Flight Controller AG Drone T1 Flight Controller AG Drone T1 Flight Controller AG Drone T1 Flight Controller Product DescriptionSpecification T1 flight quadcopter controller is a mature flight controller for agricultural UAV. Diy quadcopter flight controller provides rich and practical function that can meet the multiple requirements of the current agricultural UAV. By the integration of high precision sensor, the application of advanced industrial precision calibration algorithm as well as reasonable intelligent operation mode, the more efficient, accurate and convenient way of plant protection work can be realized. Autonomous operation/ One key takeoff and landing Autonomous operation according to the scheduled route, once the route is planned, it can be reused. Automatic takeoff or landing can be achieved by a switch. Terrain following/ Height hold The relative height between aircraft and crops can be maintained with high precision radar. The track is guided by the integrated navigation system, which can make sure that the flight is a straight line. High positioning accuracy/ Long distance cruise Support GPS, reliability is improved. Can automatically work even if out of the sight distance. Low voltage alarm/ Resume work Support voice alarm when low voltage and record current position before auto return. After replacing the battery, return to break point and resume work automatically. Pesticides monitoring/ Uniform spraying Support monitor the pesticide dosage; voice alarm and auto return are performed when there is no pesticide. After adding the pesticide, return to break point and resume work automatically. Reliable algorithm/ Stable attitude With high precision IMU and robust control algorithm, the aircraft has stable attitude and high anti-interference. Monitoring / Broadcast function Support cell phone ground station, which can measure the location of plots, set parameters and monitor flight status, voice announcements is integrated in it. Basic Parameters Flight Mode Attitude mode; GPS mode; AB point operation mode Applicable Models Quadcopter (Type I, II) Hexacopter (Type I, V, and IY Co-Axial Double-propeller, Type YI Co-Axial Double-propeller, Irregular-shaped 4-axis and 6-propeller) Octocopter (Type I, V, and X Co-Axis Double-propeller, Irregular-shaped 6-axis and 8-propeller) ESC PWM ESC with output lower than 490HZ Max. Output Channels 8 RecommendedRemote PCM or 2.4GHZ, at least 8 channels remote controller Receivers S.BUS, PPM and PWM NO. ofCPU cores 5-core Protective Functions Semi-automatic operation mode AB point operation mode Breakpoint continued spraying function Flow control function Out of control or hovering or returning Low power alarm and return landing protection Flight Characteristics Hovering Precision Horizontal Direction: ±2m Vertical Direction: ±0.8m Max Angle of Inclination 30° Max. Yaw Speed 150°/s Max. Vertical Speed 6m/s Wind Tolerance Sustained Wind: Scale 3 Gust: Scale 4 Electro-mechanical Characteristics Working Voltage 2-12S Power Consumption <4W Operating Temperature 10℃～60℃ Seismic Peak <1G Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as DIY components for drones.

Product DescriptionSpecification 24v Brushless Motor Series With standardization of UAV industry segment, the requirements of user are growing rapidly. TTF, is now releasing P series motors for agricultural application with powerful thrust and high performance after tremendous tests. P series 24 volt brushless motors are capable of working in a demanding environment with reliability and long service life. More Thrust Weight decrease is achieved by optimizing stator structure while maintaining its mechanical strength. Manual winding helps increase slot fullness for more thrust. Low Noise, Stable & Reliable 24N28P/36N42P configuration reduces the strongest drone motor vibration in operation for motor wearing diminution, service life extension and noise debasement. P series motors run more smoothly than motors with general configuration at maximum throttle. Impact Resistant Optimized machining precision and motor structure with motor core part protection effectively avoids cases as to the failure in motor utilization after crash and impact. Dustproof, Waterproof & Cooling Closed exterior and lattice structure take account of both dustproof, waterproof and cooling effects which handles usage in various environment. Anti- corrosion Coil Special coating gets the coil free of corrosion from pesticides. Extensive Compatibility There are M3 and M4 mounting holes on the motor base for different frames. P series largest drone motors are not confined in the plant protection field. It can also be employed on VTOL planes. P series motor P6215-175KV P7115-135KV P8320-120KV CF Prop & Max thrust 22*75: 9.46kg 21*70: 9.15kg 26*80:10.85kg 26*85: 10.93kg 30*80: 16.62kg 30*95:17.14kg ESC 80A 80A 100A Volts 12S 12S 12S AUW Quadcopter: 16kg Hex-copter: 25kg Oct-copter: 33kg Quadcopter: 21kg Hex-copter: 30kg Oct-copter: 38kg Quadcopter: 33kg Hex-copter: 48kg Oct-copter: 62kg Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as DIY components for drones.

Product Description Specification ESC AG 32-bit quadcopter motor ESC, Quick and Stable Response. Splash proof and corrosion resistance; Higher efficiency with less heat generation. ● Agriculture ESC use STM32F051 MCU, ARM 32-bit Cortex Core with 48 MHz frequency. ● Optimized firmware is specialized for disc motor, excellent compatibility. ● The firmware is specialized for multi-rotor, uses ASCF technology (Active Switch Continued Flow), higher efficiency, significantly reduce the heat when ESC’s working. ● Splash-proof, corrosion resistant, especially suitable for agricultural plant protection multi-rotor; ● Strong self-adaptable firmware, 4 timing options, very simple to use. ● Supports frequency of throttle signal to 500Hz max, compatible with various kinds of flight control. ( ≥500Hz throttle signal is nonstandard signal ) ● Maximum supports 12S LiPo battery, supports for single LiPo battery voltage up to 4.35V. 32-bit MCU Quadcopter esc uses powerful STM32F051 series MCU and ARM 32-bit Cortex core, working at 48MHz frequency. Fast calculation and smooth operation. Waterproof & Corrosion Resistance Complete waterproof for the ESC to meet the purpose of agricultural drone, with fine and meticulous protection of ESC, agriculture brushless ESC injection molding technique and its waterproof level is up to IPX-5. Not only has good heat dissipation and exquisite appearance, but also protect electrical components from external interference, greatly extend service life. Rain drops and pesticide liquid have no influence to electronic parts in operation. Agricultural drone exclusive software, fast throttle response, fly more stable Agricultural drone special structure and aerodynamic characteristics, request quicker response of ESC. Thanks to the agricultural drone core program, fast throttle response and good throttle linear experience. Makes flight more stable, suitable for intelligent task of agricultural drone. ASCF: high efficient Specific designed firmware for multirotor which adopts Active Switch Continued Flow( ASCF) can reduce heat generation magnificently and increase efficiency. Boost to Agriculture High efficiency, long hover time. Synchronous rectification drive efficiency optimization technology to improve efficiency, extended flight time, compared with similar products in the market. Agriculture Drone ESC 80A Agriculture Drone ESC 100A Agriculture Drone ESC 150A Specifications Cont./ Peak Current(10s) 80A/ 120A(10s) 100A/ 120A(10s) 150A/ 180A(10s) Input 5-12S LiPo 5-12S LiPo 5-12S LiPo BEC Output No No No Size & Weight Size 81.5x36.5x21.1 mm 76x36.5x20 mm 136.5x48x27 mm Weight 103 g 95g 249g Applications 550mm Class Drone 650mm Class Drone Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as DIY components for drones.

The 5 Main Areas of DIY Drone Parts Once you’ve decided on the type of DIY drone you want to build (e.g. quadcopter, hexacopter, etc.), you’ll have to learn about the 5 areas of DIY drone construction, which are: Mechanics, Propulsion, Flight Controllers, Sensors, Video Diy Quadcopter Kit: Mechanics First, you'll want to familiarize yourself with the types of drones that you can build. Carbon fiber frames, this material may be a more cost-effective option for your first drone especially in the event that you don’t quite master construction the first time around and/or accidentally crash it. DIY Quadcopter Kit: Propulsion Propulsion is what drives your drone or UAV. One of the most important features to consider for this area, are the propeller blades. Drone builders have the option of selecting fixed or folding blades; folding blades can make storage easier, especially if you’re short on space. Another important component is the ESC or “Electronic Speed Controller.” This device controls the speed at which your UAV motor rotates and connects the battery, motor, and flight controller. Next, you'll want to consider a power source. A Lithium Polymer battery is the most common battery used for DIY drones, but there are a lot of other options. You'll also need a Power Distribution board or cable to split the power to the devices connected to your UAV. DIY fpv drone: Flight Controllers There are many components that can be integrated into DIY drone controls. The most important are: a base station, a transmitter, and a flight controller. A control station can be used instead of or with a handheld transmitter. A transmitter is a device that sends some signal or multiple signals to your receiver. Generally, a base station will include a transmitter, antennae, a video receiver, a monitor, battery, and other devices. The flight controller is the “main brain” of your UAV. Like a computer, it processes all the incoming/outgoing data and signals. Depending on how sophisticated your flight controller is, it may have GPS, a barometer, compass, and more. DIY Drone: Sensors Depending on your budget and your experience constructing DIY drones, there are a wide variety of sensors you can incorporate into your custom aircraft such as a(an): Accelerometer: a device that lets you know about your DIY drone's orientation with respect to the ground. Barometer: a device that measures pressure and provides important information about the altitude you're flying in. Compass: a device that provides you with North, South, East, West information. GPS: a positioning system that uses satellites to pick up your drone's location. Altimeter: a device that gives you information about your drone's altitude. Since federal regulations prohibit drones flying above 400′, an altimeter may be a useful tool to help you avoid legal penalties. DIY Drones: Video If you’re not interested in aerial photography or cinematography, you don’t have to add a video component to your DIY drone. Some people are more interested in flying; for these people, not including video will help reduce the cost of building their first DIY drones. However, for the people who want to take photos and capture aerial scenes, they have several video options available. FPV or “First Person View” is a video option where a camera is mounted to a drone and a pilot can see a live video feed displayed on a monitor, smartphone, or virtual reality glasses. Another option is incorporating a gimbal camera, which many people use to take stills and video of themselves in motion. Depending on your experience and skill set, you may be able to experiment and successfully implement different photography and video devices. Using a little craft and ingenuity, you can integrate a wide variety of digital video cameras, LCDs, or OCDs to your do-it-yourself drone. Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as DIY components for drones.

Product DescriptionSpecificationVideo Detail of S3 Mini Pocket Selfie Drone New design/ new intelligence/ classic & modern Function Foldable HD Camera Altitude Hold App Control Track Setting Rea-time Transmission VR Glass Gravity Sensor Altitude Hold The small selfie drone is equipped with altitude hold system for stable flight, clear photo and video. Especially for beginners. HD Camera Equipped with HD WIFI camera Support real-time transmission Capture every wonderful moment Real-time Transmission Phone APP (Android, IOS) Real-time Image Transmission APP Video Clips Support video clips via phone APP Share video at the same time Post the wonderful moment At anytime, anywhere. Gravity Sensor Mini rc selfie drone supports gravity sensor control via phone app Mini pocket folding drone provides you the different experience of controlling Voice Control Foldable mini rc selfie drone supports voice control via phone app Air selfie mini drone provides you the different experience. 3D VR Mode Air selfie pocket drone supports 3D VR mode via phone app Watching live via real-time transmission Track setting Mini rc selfie drone for sale supports track setting via phone app Set the flight track by drawing the screen Headless Mode Support headless mode Baby selfie drone is always remote control centered One key return Support one key return function under headless mode Product Name Selfie drone S3 Color Black Battery 3.7V 300mah Charging Duration 45 minutes Flight Time 8-10 minutes Remote Control Distance 80-100m Product Measurement Unfold: 15*15*2.8cm Fold: 7*7*2.8cm Package Measurement 16*16*8.5 cm Included Components Aircraft*1, Remote Controller*1 User Manual*1, USB charging Cable*1, Propeller*4 Screwdriver*1 Product Functions Photo/ Video, Foldable, Altitude Hold, Phone APP, Real- time Transmission, 3D VR, Gravity Sensor, Voice Control, Headless Mode, 360° Flip, Speed Control, One Key Return, One Key Takeoff/ Landing Shenzhen TitanFlying Technology Co., Ltd is a high-tech enterprise and professional Aero-Model manufacturer that unifies product design, research development, production, marketing and customer service. Our main product are uamanned aerial vehicle, including professional drones and consumer drones, as well as DIY components for drones.

What Is Unmanaged Industrial Ethernet Switch? H3B unmanaged industrial Ethernet switches are basic plug-and-play industrial switches with no remote configuration, management, or monitoring options. H3B offers a mature production line of industrial unmanaged switches from Fast Ethernet, Gigabit, and 10G transmission rate, with copper and different fiber connector types. H3B unmanaged industrial Ethernet switches also offer various port-counts, mounting, and PoE options. Without any configuration, customers have very easy access to stable and rapid network transmission with multiple plug-and-play devices. Our products are also very easy for maintenance. For our full-line industrial series, we offer 5 years warranty to keep great after- sales service. Why Should We Choose H3B Unmanaged Industrial Ethernet Switch? Briefly speaking, the H3B series industrial switch is a cost-effective way for you to enter the world of Industrial Ethernet technology. The unmanaged industrial switches from H3B are the outcome from years of dedicated hardworking without compromising on quality and reliability. We never sacrifice quality to compromise on low price demands. All our switches are designed with 100% brand new materials and imported chipset to ensure stable and long-time performance in harsh environments. For better marketing, we've prepared all the necessary certifications. H3B unmanaged industrial switches are designed for all network applications in which management function is not needed. What Options Do We Offer about Unmanaged Industrial Ethernet Switch? With a mature and wide range of industry-grade unmanaged Ethernet switches, H3B can offer an ideal solution for every customer and every location of the application. All our industrial switch series are with a redundant power supply to ensure stable power functions. We also developed multiple switches with PoE ports which would be helpful for the power supply to the equipment such as IP cameras or IP phones through the Ethernet cable. H3B unmanaged industrial switch series offers high reliability, up to 18 ports of connectivity; DIN-rail mounting and rack mounting are also optional. Besides, EMI protection is also equipped on all models to ensure the best performance. Our unmanaged POE series is designed for a monitored family of products. With the application of our POE series, it can easily solve the problem of power supply at harsh sites.

Minimum Order: 500

What Is SFP Module? SFP means small form-factor pluggable. It's a compact and hot-pluggable transceiver which is commonly used in telecommunication and data communication. SFP is often called mini-GBIC (Gigabit Interface Converter). It is with a smaller size and it has already taken the place of GBIC modules in most 1Gb applications. Currently, most SFP is fiber optic SFP types and most of them are used for gigabit and 10G devices. 100M SFP modules are still in some needs, but it's decreasing. Optical SFP modules are designed with a wide range of transmitters and receivers for multiple distance needs. They are also applied with various wavelengths to meet different optical signal transmission. There are also SFP modules designed for Ethernet ports, they can convert fiber ports into RJ45 ports. SFP offers a convenient way for different wavelength and distance needs in the network. Most of our gigabit switches are also designed with SFP versions in order to meet the requirements. Unlike fixed fiber modules on normal switches, SFP modules can be replaced easily according to different application requirements. What Kinds of SFP Module Does HS Offer? The most common SFP modules transmission rate is 1.25G and 10G. SFP modules are also divided into single-mode fiber and multi-mode fiber. Single-mode fiber can reach the longest distance as 120KM. Multi-mode types meet the demand for short-distance transmission needs, which can be up to 600 meters. Mainstream SFP modules in the market are still single fiber types. SFP modules can be categorized into different versions under Gigabit Ethernet standards and industry-accepted standards, including 1000BASE-T, 1000BASE-TX, 1000BASE-SX, 1000BAS-LX, 1000BASE-LX10, 1000BASE-BX10, 1000BASE-LX/LH, 1000BASE-EX, and 1000BASE-ZX. HS has developed a full range of commonly needed 1.25G and 10G SFP modules types. What Else Should We Know About SFP Module? Except for single-mode and multi-mode, SFP modules are also divided into single fiber and dual fiber types. We also call them simplex and duplex types. For simplex types, we only use a single fiber cable for data transmission. As for Duplex type, 2 fiber cables are required as there are individual transmitting and receiving ends. Simplex SFP modules are also called bidirectional (BiDi) SFP modules. The most commonly used wavelength for simplex types is 1310/1550nm, 1310/1490nm. All SFP modules should be used by pairs. For duplex SFP modules, we have to use SFP modules with the same wavelength on the two sides otherwise they will not be able to communicate. However, it's opposite for simplex SFP modules. On the 2 sides we need to use opposite wavelengths, which we will mark with A and B for you to tell. A should always be connected with B on the other side. The Sealed SFP optical and electrical integrated modules are designed to maximize valuable space on the PCB. It creates great convenience for customers. We offer wide range of SFP module types as well as SFP fiber optic switch to enrich your network infrastructure. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe extender repeater, poe ethernet repeater, poe extension, Ethernet Switch, POE Switch, Ethernet Extender and etc. Want to know fiber SFP types? Please contact us.

Minimum Order: 500

Features Users can set the various functions of the switch through the Ethernet port by WEB and telnet. Built-in ARP and DOS defense system can effectively defense the ARP, DOS, and a variety of virus attack. Management Gigabit Fiber LAN Switch also equipped with many powerful features: overall ACL, spanning tree, a storm suppression, bandwidth control, IGMP Snooping, port security, etc. A managed fiber switch is a network device which can be configured and properly managed to offer a more tailored solution for those who has more network demands. Except the control over traffic, they also offer tools and configuration platforms to monitor and adjust the network. HS Group is also dedicated in the research and development of managed switch series to meet different market demands. Managed fiber switches are designed to deliver the most demanding functions for the network needs. VLAN is the most commonly needed and used for some basic managed switch models. It simply meets the demand of individual and confidential data transmission between separate LAN port end users. Except VLAN, there are many diverse and rich features such as CLI, SNMP, IP routing, QoS, etc.. Managed fiber switches are often used in the core layer of a network, especially for the large and complex data centers. However, in order to meet different kinds of networks demands, there are some smart switches which are only lightly managed. For the users who has limited budgets or don’t require full management functions of switches, they can choose smart switch as an alternative. In this way, we developed different kinds of managed fiber switch to meet different users’ demands. Regarding the question of what kind to choose, there are lots of aspects to be considered. Normally it depends on the scale of the network and the features required for the application as well as the complexity of the network. Most of the small networks does not require any managed fiber switches as what they need is only the basic functions of unmanaged fiber switches or even simple Ethernet switches. However, for some big networks, thousands of users might use their network service at the same time. Except a solid and secure way to control the data transmission, under such circumstances, a strong protection of the whole network is also required. In such cases, managed fiber switch would find its perfect place in the network. Basically speaking, when looking for managed switches, there are two types. Smart switches are those with a limited number of configuration options. And they will be a lot more affordable than the fully-managed types. Fully managed solutions are targeted at servers, enterprises and big data centers. The latter are destinied for intensive workloads, huge amount of traffic data transmission where customized and diuversified configuration methods are necessary. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe extender repeater, poe ethernet repeater, poe extension, Ethernet Switch, 10g media converter, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features With standard 2U design, it can be installed on the racks of the cabinet, which enables unify management and maintenance. With a modular power supply design, we can replace the damaged power supply separately due to the redundant power supply without affecting the system. All stand-alone media converters or media converter PCB can work alone without affecting each other’s performance. All stand-alone media converters or media converter PCB are hot-pluggable. Individual LED indicator for each power module, stand-alone media converter and media converter PCB. Introduction: The HS fiber media converter chassis is with standard size of 19 inch. In order to fulfill the diversified market needs, HS group developed media converter chassis with multiple designs from color to different slots combination. The 2 most commonly used types are 14 slots and 16 slots. 14 slot type is for the stand-alone media converters and 16 slot type is for media converter PCB cards. Both are designed with dual power supply. We also developed diversified color designs to help promote your brand among similar products.   The HS fiber media converter chassis is highly integrated photoelectric converter center that centralizes up to 16 photoelectric converter cards in a single rack for unified power supply. It not only reduces the cable, simplifies the structure, but also facilitates management and maintenance. Rack support for hot-swap optional single or dual power supply. With dual power supplies, in order to reduce the load on each power supply, both power supplies will be supplied at the same time to extend the life of power supplies. In case one of the power supply fails, the other power supply can be supplied independently so that the converter will still work normally. When the power supplies need to be maintananced, there is no need to pull out the fiber optic converter or remove the rack from the cabinet. We can just simply pull the faulty power supply from the back of the rack for repair or replacement, which makes the maintenance extremely convenient and fast. In this way, it can provide high reliability, high capacity, high integration, economical. All of those significant features lead to stable operation, solid power supply capacity, easy operation, easy maintainance and practical fiber optic network center solution for fiber-optic Ethernet network system.  Specifications: Product Model Product Description HS-4F2E-A/B20 10/100BASE-TX to 100BASE-FX SC Fiber Switch SMF,20KM HS-4F62E-S20 10/100BASE-TX to 100BASE-FX SC Fiber Switch DF,20KM Ordering Information: Product Model Product Description HS-2U-14slot 14slot, 2U 19”, Dual power supply HS-2U-16slot 16slot, 2U 19”, Dual power supply Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide fiber optic media converter chassis, fiber converter chassis, poe extension, Ethernet Switch, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features Support the switch between 10/100Base-TX and 1000Base-SX/LX 2*1.25Gbps full-duplex fiber ports and 4*100M Ethernet ports with auto- negotiation function Support 100M speed rate,MDI/MDIX and half/full-duplex with auto-negotiation function Each port has the complete LED Indicator light Support single mode single fiber,single mode dual fiber,multi-mode dual fiber and SFP slot Support IEEE802.1d Spanning Tree Support high performance QoS function on each port Support broadcast storm control Support 48-56V voltage input Support 8K MAC table Support IEEE802.3x flow control and back pressure control Require no configuration and will instantly operate as soon as you power it up Small volume,light weight Low power consumption chip with heat sink built in to ensure longtime efficient operation Support POE power up to 30W for each port,support IEEE802.3af,IEEE802.3at The HS 2G4FEP is 1000M POE switch with 1 1000M fiber port and 4 10/100Mbps RJ45 POE ports. We also offer all ports gigabit for higher speed demand networks. It’s suitable for the network which requires cascading switches as well as power supply for 1-4 ending devices. POE switches offers power supply through Ethernet cables on the basis of normal non-POE functions. There are 2 kinds of POE switches, standard POE and non- standard POE. Non-standard POE switches get outdated with the development of technology. There is big risk of burning as it gives power as soon as ending equipment is connected to it. For standard POE, there is automatic detection before the power supply. It will detect if the ending equipment can bear the power supply or not; it can also detect if power supply is really needed. In this way, there will not risk of buring from compulsive powering. Most of the current IP cemeras support to be powered with POE switches. So there is no need to arrange extra wiring as normal non-POE switches and it’s more reliable for the IP cameras as there is smart detection before power supply. Without the extra labor work and cost on the cabling, POE switches also help to save lots of money and time. If any changes need to be made for the locations of the IP cameras, it’s also easier for maintance and upgrade as there is no need to worry about the power socket. As a 48V standard POE switch, HS 2G4FEP is a device which can help you to improve your current network greatly. If you need to transmit network over long distance and there is need for power supply on 1-4 ending devices, it would be the perfect solution for you. 2 fiber and 4/8 POE port models are best selling models for small size LAN networks. Welcome to test! The HS-2G4FEP is a POE switch designed for network monitoring. It has four 10/100Mbps Ethernet ports and two 1.25Gbps fiber ports. It is designed with imported Marvell chip to achieve lower power consumption and high stability. It extends the transmission distance of a network from 100m to120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe switch 1000 mbps, switch 1000mbps, 6 port poe switch, gigabit media converter, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500