Consumer Electronics - Others

Features Users can set the various functions of the switch through the Ethernet port by WEB and telnet. Built-in ARP and DOS defense system can effectively defense the ARP, DOS, and a variety of virus attack. Management Gigabit Fiber LAN Switch also equipped with many powerful features: overall ACL, spanning tree, a storm suppression, bandwidth control, IGMP Snooping, port security, etc. A managed fiber switch is a network device which can be configured and properly managed to offer a more tailored solution for those who has more network demands. Except the control over traffic, they also offer tools and configuration platforms to monitor and adjust the network. HS Group is also dedicated in the research and development of managed switch series to meet different market demands. Managed fiber switches are designed to deliver the most demanding functions for the network needs. VLAN is the most commonly needed and used for some basic managed switch models. It simply meets the demand of individual and confidential data transmission between separate LAN port end users. Except VLAN, there are many diverse and rich features such as CLI, SNMP, IP routing, QoS, etc.. Managed fiber switches are often used in the core layer of a network, especially for the large and complex data centers. However, in order to meet different kinds of networks demands, there are some smart switches which are only lightly managed. For the users who has limited budgets or don’t require full management functions of switches, they can choose smart switch as an alternative. In this way, we developed different kinds of managed fiber switch to meet different users’ demands. Regarding the question of what kind to choose, there are lots of aspects to be considered. Normally it depends on the scale of the network and the features required for the application as well as the complexity of the network. Most of the small networks does not require any managed fiber switches as what they need is only the basic functions of unmanaged fiber switches or even simple Ethernet switches. However, for some big networks, thousands of users might use their network service at the same time. Except a solid and secure way to control the data transmission, under such circumstances, a strong protection of the whole network is also required. In such cases, managed fiber switch would find its perfect place in the network. Basically speaking, when looking for managed switches, there are two types. Smart switches are those with a limited number of configuration options. And they will be a lot more affordable than the fully-managed types. Fully managed solutions are targeted at servers, enterprises and big data centers. The latter are destinied for intensive workloads, huge amount of traffic data transmission where customized and diuversified configuration methods are necessary. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe extender repeater, poe ethernet repeater, poe extension, Ethernet Switch, 10g media converter, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features With standard 2U design, it can be installed on the racks of the cabinet, which enables unify management and maintenance. With a modular power supply design, we can replace the damaged power supply separately due to the redundant power supply without affecting the system. All stand-alone media converters or media converter PCB can work alone without affecting each other’s performance. All stand-alone media converters or media converter PCB are hot-pluggable. Individual LED indicator for each power module, stand-alone media converter and media converter PCB. Introduction: The HS fiber media converter chassis is with standard size of 19 inch. In order to fulfill the diversified market needs, HS group developed media converter chassis with multiple designs from color to different slots combination. The 2 most commonly used types are 14 slots and 16 slots. 14 slot type is for the stand-alone media converters and 16 slot type is for media converter PCB cards. Both are designed with dual power supply. We also developed diversified color designs to help promote your brand among similar products.   The HS fiber media converter chassis is highly integrated photoelectric converter center that centralizes up to 16 photoelectric converter cards in a single rack for unified power supply. It not only reduces the cable, simplifies the structure, but also facilitates management and maintenance. Rack support for hot-swap optional single or dual power supply. With dual power supplies, in order to reduce the load on each power supply, both power supplies will be supplied at the same time to extend the life of power supplies. In case one of the power supply fails, the other power supply can be supplied independently so that the converter will still work normally. When the power supplies need to be maintananced, there is no need to pull out the fiber optic converter or remove the rack from the cabinet. We can just simply pull the faulty power supply from the back of the rack for repair or replacement, which makes the maintenance extremely convenient and fast. In this way, it can provide high reliability, high capacity, high integration, economical. All of those significant features lead to stable operation, solid power supply capacity, easy operation, easy maintainance and practical fiber optic network center solution for fiber-optic Ethernet network system.  Specifications: Product Model Product Description HS-4F2E-A/B20 10/100BASE-TX to 100BASE-FX SC Fiber Switch SMF,20KM HS-4F62E-S20 10/100BASE-TX to 100BASE-FX SC Fiber Switch DF,20KM Ordering Information: Product Model Product Description HS-2U-14slot 14slot, 2U 19”, Dual power supply HS-2U-16slot 16slot, 2U 19”, Dual power supply Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide fiber optic media converter chassis, fiber converter chassis, poe extension, Ethernet Switch, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features Support the switch between 10/100Base-TX and 1000Base-SX/LX 2*1.25Gbps full-duplex fiber ports and 4*100M Ethernet ports with auto- negotiation function Support 100M speed rate,MDI/MDIX and half/full-duplex with auto-negotiation function Each port has the complete LED Indicator light Support single mode single fiber,single mode dual fiber,multi-mode dual fiber and SFP slot Support IEEE802.1d Spanning Tree Support high performance QoS function on each port Support broadcast storm control Support 48-56V voltage input Support 8K MAC table Support IEEE802.3x flow control and back pressure control Require no configuration and will instantly operate as soon as you power it up Small volume,light weight Low power consumption chip with heat sink built in to ensure longtime efficient operation Support POE power up to 30W for each port,support IEEE802.3af,IEEE802.3at The HS 2G4FEP is 1000M POE switch with 1 1000M fiber port and 4 10/100Mbps RJ45 POE ports. We also offer all ports gigabit for higher speed demand networks. It’s suitable for the network which requires cascading switches as well as power supply for 1-4 ending devices. POE switches offers power supply through Ethernet cables on the basis of normal non-POE functions. There are 2 kinds of POE switches, standard POE and non- standard POE. Non-standard POE switches get outdated with the development of technology. There is big risk of burning as it gives power as soon as ending equipment is connected to it. For standard POE, there is automatic detection before the power supply. It will detect if the ending equipment can bear the power supply or not; it can also detect if power supply is really needed. In this way, there will not risk of buring from compulsive powering. Most of the current IP cemeras support to be powered with POE switches. So there is no need to arrange extra wiring as normal non-POE switches and it’s more reliable for the IP cameras as there is smart detection before power supply. Without the extra labor work and cost on the cabling, POE switches also help to save lots of money and time. If any changes need to be made for the locations of the IP cameras, it’s also easier for maintance and upgrade as there is no need to worry about the power socket. As a 48V standard POE switch, HS 2G4FEP is a device which can help you to improve your current network greatly. If you need to transmit network over long distance and there is need for power supply on 1-4 ending devices, it would be the perfect solution for you. 2 fiber and 4/8 POE port models are best selling models for small size LAN networks. Welcome to test! The HS-2G4FEP is a POE switch designed for network monitoring. It has four 10/100Mbps Ethernet ports and two 1.25Gbps fiber ports. It is designed with imported Marvell chip to achieve lower power consumption and high stability. It extends the transmission distance of a network from 100m to120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe switch 1000 mbps, switch 1000mbps, 6 port poe switch, gigabit media converter, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features 5*1000M Ethernet ports with auto-negotiation function Support 1000M speed rate, MDI/MDIX and half/full-duplex with auto-negotiation function Each port has the complete LED Indicator light Support single mode single fiber, single mode dual fiber, multi-mode dual fiber and SFP slot Support IEEE802.1d Spanning Tree Each port supports wire-speed switching, 64~1518 frame length can reach the wire speed Support 9216bytes Jumbo packet Internal 4K MAC Address Entities Support high performance QoS function on each port Support multicast to avoid network congestion Support 5-16V voltage input Support 4KV port lightning protection VLAN DIP effectively solve the network congestion and lagging caused by broadcast storm. Require no configuration and will instantly operate as soon as you power it up Use low-power consumption chips, only 2.0W in full load conditions The HS 5GE is a 10/100/1000Mbps Ethernet Switch hub for FTTD desktop installation. HS 5GE is with 5 10/100/1000Mbps RJ45 ports; as a switching hub, it shares 1 Ethernet cable with other 4 terminal devices such as computer, router or switch, etc.. As the main connecting devices in a LAN network, Etherent switches are one of the mostly applied network devices. If there are over loaded users, busy APPs and all kinds of servers in your LAN networks, and the network infustructure is never adjusted with the increase of above changes then the performance of the network transmission would be severely affected. The best solution would be the apply of a gigabit desktop Ethernet switch. The function of switches is totally different under different network environments. It’s also different story between adding new switches under current network environment and replacing current switches with more ports. The point of using switches is to reduce and detect the data flows in the network, if one specific switch has to forward all the packets received under poor deployment, then the other switches will not be able to display their best performance and the transmission speed will also be affected. Except the position of switches, it will also lead to problems if we deploy switches at the locations with small data load and few packets. Under such circumstances, a switch hub would be a perfect solution. When the current network is not very crowded, a switch HUB would be perfect to solve the current network issues. HS 5GE is with super small size and nicely designed blue metal case. It can fit in any spaces as it’s super compact. Without extra wiring, it can help to improve your cabinet and desk back to be neat and tidy enough. And as a gigabit switch HUB, it maintains the fast Gigabit transmission speed without any compromise. If you need a small switch HUB and need to connect with less than 5 devices, it would be the perfect choice for you. The HS-5GE series unmanaged switches are full gigabit switches which are specially designed for high forwarding network environment such as school, family, SMEs and mini monitoring. It has 5 10/100/1000Mbps adaptive Ethernet ports. All ports support wire-speed forwarding and the data rate is up to 1000Mbps. There is lightning protection to ensure smooth and stable operation. Auto MDI/MDIX is also available. No configuration is required, it will instantly operate as soon as you power it up. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe extender repeater, poe ethernet repeater, ethernet switch 1000 mbps, fast fiber converter, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500

Features POE Extender-The Smart Solution for Covering Distances As we all know, Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When a longer transmission distance is needed, we normally use fiber cables to extend the transmission distance. However, sometimes we do not have the budget or space for fiber wiring. To overcome the Ethernet cable distance limit, we can simply apply with a POE extender. It can help extend a certain distance with CAT-5e or CAT-6 cables. After using POE extenders, the connection distance in total for the Ethernet cables can be as long as 400 meters. Besides, it's very easy to use and also with competitive prices. For applications not suitable or affordable on fiber solutions, it can help solve the problem easily and effectively. POE Extender has the following main features: 1.Extends a POE connection beyond the limit of 100 meters 2. It's IEEE802.3af and 802.3at compliance 3.Super easy for installation; without any additional power supply 4.With wide compatibility to most POE products in the market. 5.Mainly for indoor use. How are the HS POE Ethernet Extender Deployed? Switch > PoE transmitting device > PoE receiving device > IP powered device Detailed steps are as follow: 1. Connect the switch and POE transmitting device through fiber cables 2. Connect the "To RX" port on the POE extender to the "To TX" port in the PoE receiving device through RJ45 cable 3. Connect the "To IP device" port on the POE extenders to the ending IP device that needs to be powered. Why HS Power Over Ethernet Extender? HS PoE Extender delivers 100 Mbps, full-duplex data rate. Our POE Extender can be installed easily into an existing installation as it's compatible with both POE and non-POE switches in the market. It’s designed to extend POE over the standard of 100 meters. For many building applications that require more than 100 meters Ethernet distance, HS POE extender can play a very important role to extend the limited distance. HS POE extender is an easy and cheap solution for many application scenarios as to power IP cameras, access card readers by providing power plus data to up to 4 IP devices under 1 Ethernet cable. Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe extender repeater, poe ethernet repeater, poe extension, Ethernet Switch, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.

Minimum Order: 500