Fiber, Yarn & Thread

Debris Netting for Scaffold Safety, Wind Breaking and Shading Scaffold is very important devices in constructions requiring safety protection for both its workers and the people around the scoffold. Scaffold debris netting can be knit polyester, high density polyethylene, polypropylene, PVC- coated polyester, or knitted polyethylene fabrics. Also known as Scaffolding Net, Debris Scaffold Netting, Scaffold Safety Netting. Debris scaffold netting is foldable, air flowing, shading, low cost and has a wide application in construction, bird control and agriculture netting uses. Available in green, black or other colors. Rolls sizes in 1.2m x 50m, 2m x 50m, 3m x 50m. Scaffold Debris Netting, HDPE Fabric, 75gsm, in White Color HDPE mesh debris scaffold safety netting Scaffolding debris mesh nets, in rolls 3x50m. Fabric Type – HDPE mono filament Color: White color Fabric weight – 75 g/m² Tensile strength – 245 N/5cm Tear resistance – 50 N Temperature resistance – -40/+80 °C Wind-force coefficient Parallel – Cfy 0,17 Finished size, +/- 2% Finishing – with knitted buttonholes Buttonholes – 5 cm interval Tear resistance buttonholes – 180 N

Minimum Order: 1 bags

HDPE and Fiberglass Monofilament Netting for Construction Safety. Heavy Mesh Density ≥800head/100cm2, tensile strength approx.550 N/5 cm. Coated chemical fiber or polyester monofilament is commonly used in building construction as Debris Netting and Scaffolding Enclosure. The monofilament is mostly HDPE (nylon), pp or fiber glass as primary materials. Available in black, white or green. Construction nets create a protection barrier enclosure for both workers and individuals around the building site, as well as for properties around the work site. Four Popular Types: 1. Light Type Debris Netting: Light weight knit polyester mesh to entrap small debris. Custom made to any size and colors. 2. Medium Type Debris Netting: Designed for catching small or light debris containment. Durable and reusable mesh fabrics with a range of mesh sizes for options. Design load rating : 2000 lbs. 3. Heavy Type Fine Mesh Scaffolding Enclosure & Debris Protection

Minimum Order: 1 bags

Fine Mesh Debris Safety Netting with its installation surface not perpedicular to the horizontal plane is called horizontal netting or flat netting. It is a durable mesh fabric designed to prevent people and objects falling, or to avoid and reduce physical injury of such fallings. Horizontal safety netting is mainly used to catch falling persons and objects in construction of buildings. This heavy type debris netting is knitted in a strong high density polyethylene (HDPE) or a flexible polypropylene (PP). Debris Safety Net can include both horizontal scaffolding sun/wind blocking netting and vertical debris netting to create a barrier system for the construction site safety and for improved productivity with less cleaning up time. 3, 6 and 9 Needle Knitted types available. Fine Mesh Debris Netting, supplied with eyelets on all sides for fastening to structure. High Density Polyethylene Mesh Debris Fabric Installed for Horizontal Plane Construction Safety: Debris netting used as Horizontal Safety Net has a fine high dense opening of maximum 2000 mesh per 100 square centimeter while common vertical safety netting (max. 800 opening per 100 square centimeter). The high density mesh allows it to prevent articles with bottom area under 100 square centimeter and offers better safety features. Secondly, horizontal netting is knitted with very special method, with firm knots, uniform openings and sizes. It is firm, tough, durable and economic. Thirdly, this products offers good air permeability, can be closed for working and keep the constructional site nice and clean. Fourthly, The durable HDPE or chemical fiber materials are fire retardant.

Minimum Order: 1 bags

Vertical Debris Safety Netting With Liners, Rings and Selvages for High Building Construction Scaffolding Barrier In the construction of tall buildings, vertical wire mesh for safety is used to circle the scaffolding firmly fixed. Mostly made of HDPE Knit Mesh or nylon rope netting, vertical debris netting is installed at 90 degree angle against the horizontal line. Designed to prevent the construction materials or workers to fall down from higher places. Features: High strength, good elasticity, easy installation, non-pollution. It is environmental-friendly, soft, anti-aging, corrosion resistant, worm resistant, cold resistant, etc. Green HDPE Construction Net with Good Air Flow while Keeping Dust Away. To ensure a good ventilate, clean and safety construction environment. Material: HDPE,Nylon,PE Standard: any size are available for width below 6m; Color: green ,dark green ,blue ,orange, white,etc. Package:in rolls or in pieces; Weight:according to request .

Minimum Order: 1 bags

HDPE Debris Netting, High Mesh Density, Flame Retardant Lightweight debris nets are manufactured from high density polyethylene ( simplified as HDPE, or PE) monofilaments. HDHigh Density Polyethylene Mesh Safety NettingPE netting with high density mesh is ideal for indoor and outdoor fencing application. The newly improved webbing has extra reinforced border, and eyelets at close intervals, perfect for open sided building and scaffold use. Cost effective debris netting mesh has reinforced edges at side and middle for great strength. Specifications Material: knitted knotless virgin HDPE. Length: 50m-100m or as required. Width: 2m-10m or as required. Weight:100g-300g / square meters or as required. Contains reinforced edges at side and middle. Easy to install, Economic and secure solution. Treated with UV: ensure the nets keep long lifespan.

Minimum Order: 1 bags

Fecral fiber fecral fiber fecral fiber Iron-chromium-aluminum (FeCrAl) alloys have long been used as high- temperature heating elements. Currently, wrought FeCrAl alloys are under development as one of the promisingcandidates for accident-tolerant fuel (ATF) cladding materials in light-water reactors (LWRs).These alloys have shown excellent corrosion and oxidation resistance in a high-temperature steam environment, compared with current commercial zirconium alloys [6-8]. Their low radiation-induced-swelling and tolerance of off-normal conditions are also worth noting.Under development efforts for ATF FeCrAl alloys, 10– 13 wt.% Cr and 5–6 wt.% Al have been employed for improved surface protection effects at both the service temperature and elevated temperatures in accident-case scenarios. Small amount of alloying elements, such as molybdenum (Mo) and/or niobium (Nb), have also been added to improve the strength and control microstructures of FeCrAl alloys. 【Description】 The Fecral fiber is made of iron-chromium-aluminum alloy wire by a bundle drawing process and has a diameter of from 8 μm to 40 μm. Fecral alloy is a new type of electrothermal alloy with high electrical resistance, low temperature coefficient, long service life, high surface load and good oxidation resistance. It can be used in higher temperature environment than stainless steel fibers. 【Application】 It mainly used as raw materials for the manufacture of automobile exhaust gas purifiers(GPF), high temperature filter felts, burners, etc. 【Parameters】 Main technical specification: Diameter(μm) Strength level Filament (F) Strength(cn) Elongation Rate% Weight/meter(g/m) 8 HS 1700 ≥4.5 ≥0.95 0.55~0.65 MS 1700 ≥3.0 ≥0.75 0.50~0.70 12 HS 1700 ≥12.0 ≥1.0 1.3~1.5 MS 1700 ≥9.0 ≥0.8 1.2~1.6 22 HS 1700 ≥50.0 ≥1.20 4.4~5.0 MS 1700 ≥30.0 ≥1.00 4.2~5.2 12 HS 100×2 ≥19.0 ≥1.1 0.14~0.18

Cationic Dyeable Polyester Chip for CDP Yarn Spinning Bright Original or Recycled CDP or ECDP for CD Polyester Fiber Melt/Extrusion Spinning Description: Generally speaking, Cationic Dyeable Polyester Chip can be divided into two types, CDP and ECDP. CDP refers to the high-pressure cationic dyeable polyester chip and the dyeing condition is at 120-130℃ under 0.13MPa. ECDP is the normal pressure chip and the dyeing condition is at 98-100℃. Characteristic： For CDP, the advantage is that CDP fiber has a higher colorfastness, brighter color, and easy to obtain the effect of cross-dye, white space, and variant dye. The disadvantage is that the dyeing process needs to be done at high temperatures and under high pressure. And what’s worse, CDP fiber can not be blended with other synthetic fibers. ECDP is developed to solve the defect of CDP and also maintain the strength of CDP. So we can say, ECDP is the modified one based on CDP. Classification: According to the luster (the content of TiO2), there are Bright and Semi-Dull CDP/ECDP. According to raw material, there are Original CDP/ECDP, Recycled CDP/ECDP, Recycled Cloth CDP/ECDP. Parameters Table: (CDP) ITEM UNIT RESULT METHOD INTRINSIC VISCOSITY Dl/g 0.58 GB/T 14190-2008(5.1.1) -COOH ENDGROUP Mol/t 34 GB/T 14190-2008(5.4.1) COLOUR VALUE L / 83.5 GB/T 14190-2008(5.5.2) COLOUR VALUE b / 4.1 GB/T 14190-2008(5.5.2) MELTING POINT ℃ 248.5 GB/T 14190-2008(5.3.2) DEG CONTENT % 3.86 GB/T 14190-2008(5.2.1) WATER CONTENT % 0.01 GB/T 14190-2008(5.7.1) AGGREGATED PARTICLE Pce/mg 0.0 GB/T 14190-2008(5.6) Ash CONTENT % 0.502 FZ/T 51003-2011(6.2) Fe CONTENT mg/kg 3.68 GB/T 14190-2008(5.11) IRREGULAR CHIP % 0.00 GB/T 14190-2008(5.8) POWDER DUST mg/kg 0 GB/T 14190-2008(5.8) Parameters Table: (ECDP) No. Property Unit Standard Value 1 Intrinsic Viscosity (I.V) dl/g M0 ± 0.015 2 Diethylene Glycol (DEG) % M1 ± 0.15 3 Carboxyl End Groups (COOH) mol/t ≤20 4 Melting Point ℃ ≤242 5 Color Value L ≥48 B M2 ± 2 A ≤-0.5 6 Moisture Content % ≤0.2 Note: M0 is the central value for IV. It should be M0=0.55, when there is no special requirement. M1 is the central value for DEG. It ranges from 1.7% to 3.6%. M2 is the central value for color value. It should be M2=2, when there is no special requirement. The specialty products are offered in various specs. Samples are available upon request. Packaging: We offer international standard packaging for better storage, safety, and handling. *HDPE Plastic Bags – 25 kgs Bag packing *Jumbo Bags – 1000 kgs Jumbo bags packing All the above-listed packaging is with moisture-proof liner inside and customized packing is available upon your request.

Minimum Order: 1 bags

Recycled Flame Retardant Polyester Staple Fiber For Garment, Price become hugely favorble for buyers Polyester Staple Fiber Specification Index Item Unit 1.4D - 22D Tenacity(at break) cn/dtex 3.0 - 5.5 Elongation(at break) % 40 - 60 Linear Density Deviation % ±6 Multiple Length % 10 - 60 Defects/Flaw Content mg/100g 80 - 400 Comparison Resistance Ω 106*7 - 108*9.9 Crimp Number waves/cm 3.0 - 4.2 Rate of Moisture % 0.55 - 0.7 Remark The above specification sheet is only for reference. Different final products ,different requirements towards the fiber, such as the fiber tenacity, fiber fluffy, fiber oil pick up etc. You can send us your requirements to us Our factory is equipped with 4 Advanced Production Lines, with an Annual Capacity of 50,000MT. Manufacturing with hundreds of colors and thousands of tons in stocks for your choices. Our products are widely used in non-woven fabric, yarn, acoustic panel, Automotive interior, Geotextile, carpets, blankets, fillers for toys, pillow, quilts, Arts and Crafts, of which the specification includes from 1.5dtex to 70dtex and length from 32mm to 102mm. Our factory is mainly engaged in producing and selling of PSF, produces interior decorative materials simultaneously. AREA 85000M2 COLOR OF FIBER 240 PLANTS 　2 , EQUIPMENT HIGH PRESS SPINNING WORKERS 300 MATERIAL , VIRGIN,RECYCLED CAPACITY 500 , 00TONS