Textile Fabrics & Leather

Woven Dryer Fabric The woven dryer fabric is constructed from warp and weft yarns, both made of hydrolysis-resistant polyester. The warp system consists of upper and lower warp yarns, arranged in pairs. Each pair of warp yarns is woven through two sets of four warp yarns with different diameters to form the fabric structure. The warp yarns are flat filaments, while the weft yarns are round filaments. This design increases the contact area between the yarn surface and the paper sheet, thereby enhancing heat transfer between the dryer cylinder and the paper. The flat-yarn dryer fabric has a relatively thin structure; as water vapor passes through the mesh, the likelihood of condensation is reduced, effectively improving drying efficiency. In addition, the surface of the flat dryer fabric is smooth, resulting in lighter fabric marks on the paper during the drying process compared with conventional round-yarn fabrics. Characteristic Good breathability: The mesh design of the mesh belt is reasonable, allowing air to circulate freely, allowing hot air to fully penetrate the fabric, achieving uniform drying, improving drying efficiency, and avoiding uneven dryness and wetness of the fabric locally. High dimensional stability: During the high-temperature drying process, the mesh belt can maintain a stable size without significant elongation or contraction due to heat, ensuring the transmission accuracy of the fabric during the drying process and preventing problems such as deviation and wrinkling of the fabric. High strength and wear resistance: It has sufficient strength to bear the weight of the fabric, and is not easily worn or scratched by the fabric during long-term use, reducing the frequency of mesh belt replacement and lowering production costs. Smooth surface: The surface of the mesh belt is flat and smooth, with low friction between it and the fabric, which can avoid damage to the fabric surface during transmission and ensure the quality of the fabric. More information: https://www.woventechnicalfabrics.com/

Product Description The polyester forming fabrics are mainly made of polyester monofilament, divided into single-layer, 1.5-layer, double-layer,2.5-layer, and 3 -3-layer. It is a forming fabric, an important piece of equipment on a papermaking machine and is a device for forming. Shijiazhuang Yarns Technology Co., Ltd., founded in 1984, specializes in the production of polyester forming fabrics that are widely used in modern papermaking machines. With over 10 years of professional experience in monofilament and industrial mesh production, our forming fabrics are engineered with high-quality polyester monofilament and reinforced with nylon where required. This ensures outstanding wear resistance, strong acid and alkali resistance, and a long service life, which helps reduce replacement frequency and operating costs.   Types of Polyester Forming Fabrics Our polyester forming fabrics are divided into several types, depending on the weaving structure and application: 4-shed and 5-shed single-layer fabrics – Standard papermaking forming fabrics, suitable for cultural paper, printing paper, packing paper, and newsprint. Compatible with common Fourdrinier paper machines. 8-shed single-layer fabric – Designed for packaging grades requiring high strength such as kraft paper, cardboard, and corrugated paper. 8-shed double-layer fabric – Used in printing papers (dictionary paper, offset printing paper, newsprint), as well as tissue paper and board paper pulp layers. Suitable for medium and high-speed paper machines. 16-shed 2.5-layer fabric – Provides excellent sheet formation, widely applied in cigarette paper, aluminum foil backing paper, coated paper, and toilet tissue production. Triple-layer SSB forming fabric – Advanced design with separate forming and wear sides. Large yarns on the wear side improve stability and durability, while fine yarns on the sheet side enhance fiber retention, drainage, and paper quality. Multi-shed three-layer SSB forming fabrics – For high-speed papermaking machines producing high-grade printing paper, wrapping paper, and tissue paper.

INDUSTRIAL MONOFILAMENT FOR PAPER AND FILTRATION Raw Materials for Paper Machine Clothing and Industrial Applications Shijiazhuang Yarns Technology Co., Ltd, founded in 1984, is a trusted industrial monofilament supplier specializing in polyester, nylon, PEEK, and PPS monofilaments. With over 40 years of manufacturing expertise, advanced extrusion and testing equipment, and large-scale production capacity, we provide high-performance raw materials widely used in forming fabrics, press felts, spiral dryer fabrics, woven dryer fabrics, industrial filter media, and high-end engineering applications. Our Raw Materials Portfolio Polyester Monofilament High strength, wear resistance, and excellent acid-alkali resistance. Diameters range from 0.05–1.2 mm, customizable in color and performance (abrasion- resistant, hydrolysis-resistant, UV-resistant). Widely applied in paper machine clothing, spiral mesh, and desulfurization filter nets. Nylon Monofilament Outstanding toughness, elasticity, and fatigue resistance. After 4 hours of high-temperature baking, our nylon monofilaments retain over 97% strength— superior to many domestic brands. Used in papermaking blankets, fishing nets, ropes, and industrial transmission belts. PEEK Monofilament Aerospace-grade thermoplastic with long-term heat resistance up to 260℃. High strength, chemical resistance, and self-lubricating properties make it ideal for high-temperature filter cloth, tennis racket mesh, fuel filters, and biocompatible medical components. PPS Monofilament Exceptional thermal stability (up to 260℃ short-term), UL94 V-0 flame retardant, and unmatched chemical resistance. PPS monofilaments are widely used in filter fabrics for steel plants, power stations, and high-temperature automotive components.

Industrial Monofilament Polyester Forming Fabrics Polyester Forming Fabrics are high-strength synthetic fabrics used in the forming section of paper machines. Their primary function is to support pulp, facilitate dewatering, and form wet paper sheets, making them an indispensable key component in the papermaking process.

The 0.6 Grid Nylon Four-way Stretch Fabric, meticulously engineered for the premium activewear and technical lifestyle markets. Characterized by its sophisticated 0.6mm micro-grid reinforcement and a subtle crinkle texture, this fabric offers a refined matte aesthetic that eliminates the synthetic shine of standard nylons. Weighing just 105gsm, it provides a "weightless" wearing experience while the high 13% Spandex content ensures exceptional multi- directional mobility. This Blended Fabric is the perfect technical solution for performance pants, lightweight vests, and structured T-shirts that demand both durability and a cool, dry touch. Specification Technical Parameters Detailed Specifications Product Number WBK1061 Material Composition 87% Nylon, 13% Spandex Fabric Weight 105 gsm (Ultra-Lightweight) Width 145 cm Texture Style 0.6mm Micro-Grid / Subtle Crinkle Finish Core Functions Four-Way Stretch & Water Resistant

This 50D 100 Sorona 4-way stretch fabric (105gsm) is lightweight & breathable, with great stretch recovery and wrinkle resistance, no bagging after washes. Eco-friendly bio-based Sorona is skin-friendly, moisture-wicking, ideal for shirts, casual pants & light activewear, perfect for comfortable summer outfits. Specification Technical Parameters Detailed Specifications Product Number WBK873 Material Composition 100% Sorona Fabric Weight 105 gsm (Light) Effective Width 138cm  Surface Finish Soft sheen / opaque/ Plain Core Functions 4-way stretch&excellent elastic recovery/soft and skin-friendly handfeel/Eco-friendly

100 Polyester Bionic Printed TPU Coating fabric is woven in 75D×150D plain weave. With a soft low-noise sanded finish, ultra-soft TPU membrane lamination and water-repellent treatment, it offers excellent wear resistance, tear strength, waterproof breathability and concealment, ideal for hunting and tactical camouflage apparel. Waterproof Fabric Specification Technical Parameters Detailed Specifications Product Number WBSE-226-1 Material Composition 100% Polyester Fabric Weight 131 gsm (Mid-weight) Width 147 cm  Surface Finish Soft Sheen / Opaque/Bionic Printed Primary Function Windproof &Waterproof/Soft & Skin-friendly

Woven from 430T ultra-high density nylon taslan twill, this 150gsm fabric features a lightweight, crisp finish with special matte crinkle treatment. Laminated with high-breathability PU membrane + 20D nylon liner, it delivers waterproof, breathable performance with excellent abrasion and snag resistance. Ideal for light outdoor jackets, shell jackets and windbreakers, balancing protection and daily style. 430T Nylon Taslan 3-Layer Waterproof Fabric Specification Number WBK982-1 Material 100% Nylon Width 145 cm Weight 150 gsm Use cases outdoor jacket/Hardshell Jacket Certificate Oeko-Tex standard 100，GRS

320D nylon oxford outdoor waterproof & abrasion resistant fabric, weight 226GSM, laminated with hydrophilic high-permeability PU film, reaching 10K waterproof / 20K high moisture vapor transmission rate. Abrasion & tear resistant, windproof and easy-care, ideal for urban outdoor wear & commuter workwear. Custom color matching, stable production & fast sampling service. 1. Fabric Specifications Fabric Item No. WBK1029-1 Composition 100% Nylon Weight 226GSM Width 142cm

Dear Sir/Madam, (HS 540233) We would like to offer 100% Polyester Filament Yarn which consist of FDY (Fully Drawn Yarn) & DTY (Draw Textured Yarn). Semi-dull lustre. In 75Denier & 150D with various filaments count. Yarn assortment : FDY 75D/36 Fil, FDY 150D/96 Fil, DTY 75D/36 Fil, DTY 150D/96 Fil, etc.. DTY available in intermingle or non-intermingle. Cross-section: round. Packed with paper cone/cheese. Brand: Polyfin®. Application: weaving, warp knitting. Also available polyester dope dyed yarn. Country of origin: Indonesia. Manufactured under ISO 9001, Oekotex 100 and OHSAS certified company. Pls kindly contact for further details. Thank you. Contact: +6285892224657 (whatsapp, viber).

Minimum Order: 18000

Dear Sir/Madam, (HS 540730) We would like to offer: Georgette fabrics. Material: 100% polyester. Type of weave: plain, dobby & satin. Finish state: grey, PFP (prepared for print), plain dyed & printed. Width finish: 44/45". Item: koshibo, yoryu, tissue faile, satin, peach skin, moss crepe, palace, etc.. Packaging: in roll (with strong tube inside). All dyestuff is azo-free. Application: blouses and dresses. Certificate: ISO 9001, Oekotex 100. Stocklot is available. Product of Indonesia. For any interested parties, pls kindly contact for further details. Thank you. Contact: +6285892224657 (whatsapp, viber).

Minimum Order: 3000

HEDA 1.2D solid microfiber polyester fiber is a fine-denier soft filling fiber for winter clothing, pillows, home textiles and down-like filling products. It offers soft hand feel, smooth touch and compact fiber distribution. Available specifications: - 1.2D x 32mm - 1.2D x 38mm - 0.8D x 32mm Material: 100% PTA and MEG Fiber type: Solid microfiber polyester fiber Applications: - Winter clothing - Pillow filling - Soft home textile filling - Down-like polyester filling - Lightweight padding Compared with hollow conjugated fiber, solid microfiber is more focused on softness, smoothness and fine hand feel. It is suitable for buyers who need soft, compact and comfortable polyester filling materials. Official product page: https://www.hedafiber.com/product/solid-m , icrofiber/

HEDA recycled black polyester staple fiber is designed for industrial nonwoven applications where buyers need dark color, stable processing performance and competitive raw material cost. Available denier: 6D and 15D Raw material: Recycled textile material / waste cloth Available cut length: 32mm, 38mm, 51mm, 64mm, 76mm Quality grade: Grade A and Grade B available Applications: - Geotextile - Automotive interior materials - Exhibition carpet - Needle felt - Trunk nonwoven - Insulation panels - Industrial nonwoven products 6D recycled black fiber is suitable for needle felt, exhibition carpet, automotive nonwoven and medium-density geotextile. 15D recycled black fiber is suitable for thicker nonwoven products, insulation panels, trunk lining and heavy-duty industrial materials. Official product page: https://www.hedafiber.com/product/recycle , d-solid-black-6d15d/

HEDA 4D 51mm low melt polyester fiber is a thermal bonding fiber used as an eco-friendly adhesive fiber in nonwoven wadding, batting, padding, automotive interior materials and thermal-bonded felt. With an around 110°C melt point, low melt fiber helps bond polyester fibers during hot air or thermal processing. It can be blended with hollow fiber, solid fiber, recycled polyester fiber or other staple fibers according to the required bonding strength and final product structure. Specification: 4D x 51mm Melt point: Around 110°C Material: 100% polyester Color: White Applicatio , ns: - Nonwoven wadding - Batting and padding - Automotive interior materials - Quilting materials - Thermal bonded felt - Trunk lining - Carpet and insulation materials Packing: Approx. 320kg per PP woven bag / bale Loading: Approx. 10MT / 20FT, 26MT / 40HQ MOQ: 10MT / 20FT for trial order HS Code: 5503.2000 Official product page: https://www.hedafiber.com/product/low-mel , t-fiber-4d51mm/