Other Filter Supplies

MBR Introduction Hot selling submerged MBR Membrane Bioreactor for Pharmaceutical wastewater treatment is a new-type water treatment technology, integrated with membrane separation unit and biological treatment unit. ( MBR Membrane Microfiltration Systems -- Submerged Membrane Bio-Reactor is used instead of secondary sedimentation tank in the bioreactor to maintain high activated sludge concentration and reduce the land area of wastewater treatment facility and the sludge amount through maintaining low sludge load. The MBR membrane can completely block and retain the microorganisms in the bioreactor through its filtration function, which achieves the complete separation between the hydraulic retention time and activated sludge age, thus avoiding the sludge expansion problem of conventional activated sludge process. Compared with conventional biological water treatment technology, MBR technology has the following main characteristics including high treatment efficiency, good outlet water quality, compact layout, small footprint, easy automatic control and easy operation management. The principle of MBR Membrane Microfiltration Systems -- Submerged Membrane Bio-Reactor is based upon the separation of solids suspended in a watery solution by means of a pressure difference. While the water permeates through the membrane, the solids, bacteria and even most viruses are retained on the concentrate side on the membrane surface where they are removed by relative movement.

What is Nonwoven Needle Felt Filter Fabrics? Needle felt is a kind of non-woven filter fabric specially used for dust collector filter bags. It is a major filter material for industrial air filtration and dust removal. The needle felt is made of randomly arranged fibers needle punched on the scrim fabric, after that the fibers are close- knitted to form a tortuous three-dimensional stereo-structure, which is different from the traditional woven filter cloth composed of warp and weft yarns. It makes dust particles adhere to the surface of the filter material and form an initial layer of dust ( Filter cake), with the remarkable characteristics of small pore size, high filtration efficiency and low air resistance, greater air permeability and excellent dust particle capture. Needle felt for dust collector filter bags What is needle felt filter fabrics features and advantages? The irregular fibers in the needle felt filter fabrics are arranged in three dimensions, which could give full play to the dust capture capacity This structure easy to form the dust filter cake layer in the initial of filtration production, and is no straight pore after dedust. It makes the air filter bags has a high and stable dust collection efficiency. The statical dust capture rate of needle felt filter cloth could up to 99.5% ~ 99.99% The porosity of needle filter felt is as high as 70% ~ 80%, which is 1.6 ~ 2.0 times of woven filter fabrics, it gets larger air permeability and lower air resistance

Hanrui Puzer is a high-tech enterprise built in 2002 , we are a professional supplier for providing solid bulk material handling solutions, integrated with designing , manufacturing sales and EPC service . Our mission is dedicated to provide excellent solutions and services of handling solid bulk material in order to consistently create maximum value for customers. Pneumatic conveying system is widely used in chemical, fiber, food etc area, especially for some food and medicine industry, closed pipeline can meet hygeiene requirement. The features of this sytem is as follows: Dense phase pressure conveying generally uses compressed air at above 0.1Mpa to push materials from a hopper and high pressure rotary valve or pressure vessel through a pipeline to the destination where the air and product are sparated by a filter or other systems. The product extrudes through the pipeline at low velocity , towards the destination. Components and principle: 1. The system is combined with feed hopper, rotary valve or venturi devices, pipelines and receiving hopper and filter, the air supply is roots blower or centrifugal fan. 2. Material is poured into the feed hopper , then discharged to pipe through the rotary valve or venturi, the mixture of air and material moves from the pipe to receiving hopper resorting compressed air, the air is separated from the mixture on the top of receiving hopper and released. 3. The material in the pipelines moves at a suspended state. specifications conveying speed conveying distance operation pressure SLR Pipe material description 15-30M/S Max:800m Max:0.1MPa 3-15KG/KG SS304, Q235 etc.

Rated Current5 50A Environmental Temperature 40°C Temperature Range -25℃~+85℃ Operating Frequency 50/60HZ Line to Line 1760VDC Line to Ground 2000VDC Samples On stock MOQ Negotiated Unit Price Negotiated Delivery 15~20 workdays Item Power line EMI Filter Model VIP4-2B-50 Original of country China Package Type Surface Mount Nominal Center Frequency 150K-30MHZ Insertion Loss 60~90dB Input Impedance 50Ω Rated Voltage 110V/250V -- Designed 2 stage enhanced filtering to prevent the power supply may produce interference to the device -- Various terminal options allow you to select -- There are a variety of parts and combinations to meet different customer's EMC tests. -- OEM Can be choice

Metal Stainless Steel Sintered Mesh Filter For High Precision High Temperature Filtration product description Usually standard sintered mesh consists five layers, the protective layer, the filter layer, the dispersion layer, and two reinforcing meshes. It provides excellent persormances such as high precision and strength, so it is ideal filter medium for applications requiring high strength and precision. Thanks to its surface filtration construction, and smooth wire of the mesh, it is good at backwashing and regeneration. Therefore, it can be reused for a long time, and is especially suitable for continuous and automatic operation, which exceeds any other kind of filter material. Furthermore, this mehs is easy to be formed, machined and welded. It can be produced into many kinds of shapes such as circular, cartridge, cone and pleats. Attributes Standard size 1200*1000mm Standard thickness 1.7mm Standard material 316L Stainless stell like 304can be used either Layer Single layer or multi layers Pore size 2um , 0.5um , 10-15um customized Length Customized Material Metal material

16 bar integrated laser cutting 4-in-1 screw air compressor with air tank/air dryer/air filter Kapa 4-in-1 integrated laser cutting air compressor characteristics and advantages: A. Professional design by our engineers originally from Sullair B. Better stability and reliability with higher efficiency C. Low-speed design low-noise running , longer lifespan D. Excellent air supply ability E. Good sealing performance F. Powerful fan cooling system Specification Model Motor Power Capacity working pressure weight Air tank Dimension KP 10HP/7.5KW 1.06/0.48 8/16 bar 370kgs 300L 1550*700*1580 Cooperation terms: 1. Price: FOB Shenzhen or Shanghai in china. 2. Minimum order: 1 set. 3. Payment: T/T, L/C, paypal ect. 4. Shipping: 20-30 days.

1. Plates and Frame are fully S.S.304 material. It can meet the food degree. 2. It can ensure high pressure and temperature, so that could used in more fields, get lowest moisture and most output. 3. Manual Jack closing is practical and cost saving. Basically ZERO running cost. 4. Plate & Frame structure designed for easy operation and maintenance. 5. The flatness of the filter plate is lower than 25μm can perfectly avoid leakage. 6. Every plates is tested under high closing pressure 21 MPa. 7. All structure is also coated by S.S.304, so that easy to clean and serves longer. 8. Main beam is made of high quality SS304 with sand blasting processing and it is of high intensity and corrosion resisting. 9. All beams are produced by making use of submerged arc auto welding technology. 10. The filter cloth is pure cotton material, so that non-toxic, odourless.