Industrial Machinery & Equipment - Others

Diameter ： 20mm-150mm. Ability ： 5m ³/ h-800m ³/ h. Head ： 4m-110m. This ceramic (SIC) slurry pump is cantilever, centrifugal pump. It adopts horizontal as well as vertical axial split dual pump casing framework, lined with ceramic, which has excellent wear resistance, rust resistance and also high integrity. The mining slurry pump for sale has reasonable framework, dependable procedure and lengthy life span. Particularly ideal for tool and also high focus, solid abrasion and high head utilizing condition. Mainly utilized in mining, metallurgy, municipal, power, coal, petroleum, chemical, developing products as well as various other industries. Yijia as a centrifugal ceramic pump manufacturer provide high quality pumps and mine pump parts, welcome contact us.

Diameter: 40mm-300mm Capability: 5m ³/ h-1600m ³/ h. Head: 4m-40m. This series of ceramic (SIC) sump pumps are vertical centrifugal slurry pumps. They are submersed in fluid and also adopt single pump casing framework attached by cassette. They have vast circulation passage and ceramic lining. Yijia have excellent abrasion resistance, deterioration resistance and high integrity. They appropriate for conveying rough as well as high focus slurry. Without shaft seal and also shaft seal water, it can function typically under the condition of inadequate suction. Generally used in mining, metallurgy, community, power, coal, petroleum, chemical, constructing materials and other industries.

Diameter: 20mm-650mm Capacity: 10m ³/ h-9100 m ³/ h. Head: 4m-120m. This Yijia ceramic slurry pump is dual Casing Structure; High effectiveness, wear resistant, secure performance, interchangeability of parts; the cellular lining as well as impeller can be constructed from ceramic (SIC), which has excellent wear resistance, deterioration resistance and high reliability. The item has sensible structure, reputable operation and lengthy life span. It is especially ideal for high focus and strong abrasion problem. horizontal slurry pumps China Generally made use of in mining, metallurgy, community, power, coal, oil, chemical, constructing materials as well as various other markets.

Solid state high frequency (HF) welder Solid state high frequency (HF) welder is mainly used for carbon steel welded pipe induction welding . Using Germany IXYS brand MOSFET IXFN38N100Q2 38A/1000V and fast recovery diode DSEI 2X61-12B 61A/1200V forming series resonance inverter circuit, the solid state HF welder has a long life time with a low failure rate. Main design technical data of solid state HF welder : Model GGP100-0.45-H GGP150-0.4-H GGP200-0.35-H GGP250-0.35-H GGP300- 0.35-H GGP400-0.3-H GGP500-0.3-H GGP600-0.3-H Output Power 100 KW 150 KW 200 KW 250 KW 300 KW 400 KW 500 KW 600 KW DC Power 120 KW 180 KW 240 KW 300 KW 360 KW 480 KW 600 KW 720 KW Rated Voltage 450 V 450 V 450 V 450 V 450 V 450 V 450 V 450 V Rated Current 270 A 400 A 530 A 670 A 800 A 1070 A 1330 A 1600 A Frequency 400~450 KHZ 350~400 KHZ 300 ~350 KHZ 300 ~350 KHZ 300 ~350 KHZ 200 ~300 KHZ 200 ~300 KHZ 200 ~300 KHZ Rectifier Cabinet Size (mm) 1500x900x2000 1500x900x2000 1500x900x2000 1800x900x2000 1800x900x2000 1800x900x2000 2000x1150x2000 2000x1150x2000 Inverter Cabinet Size (mm) 1750x700x1100 1750x700x1100 1750x700x1400 1800x700x1600 1800x700x1800 2000x700x1700 2000x700x1800 2000x700x2000 Operation Console Size (mm) 800x500x1100 800x500x1100 800x500x1100 800x500x1100 800x500x1100 800x500x1100 800x500x1100 800x500x1100 Efficiency ≥ 85 % ≥ 85 % ≥ 85 % ≥ 85 % ≥ 85 % ≥ 85 % ≥ 85 % ≥ 85 % Features of solid state high frequency welder 1. Using MOSFET semiconductor , no life limit, which make sure the long life time of welder. 2. Adopting SIEMENS PLC and HMI to connect the power supply and the production line to achieve real-time monitoring of the whole production line 3. All kinds of protection functions. Including short circuit, open circuit, over current, over voltage etc. 4. High speed welding but good welding quality. Energ-saving up to 25~30% compared with vacuum tube welder.

hf welding machine Name :hf welding machine for steel pipe  Specification Power:100-800KW Freq , uency:150KHz-600KHz Characteristic: The low output ripple, the smoothly welding, reaching high output efficiency as high as 85% and still being able to adjust and troubleshoot conveniently. Compostion of hf welding machine includes the following : 1. Switch rectifying Cabinet  a. The solid state hi frequency welder rectifying cabinet integrate the switch gear cabinet part and rectifier part. b. Rectifier adopts all three-phase controlled rectification bridge,the pre- stage passive filter make sure the equipment has a bigger power factor but smaller harmonic content. c. Control circuit use dual-loop regulator of DC voltage and DC current based on single chip microcomputer, which make sure the DC voltage is continuous smooth adjustable from 0 to rated value. d. Complete protection function leads to the equipment running safely and steadily. 2. Inverter Output Cabinet a. The inverter part is consist of MOSFET single phase invert bridge in parallel style.Each bridge’s design power is 120kW/60kW.We adopt building block oe to pile up power,it's very convenient to install and maintain because every single bridge board is designed as drawer structure consisted of slideway. b. Adopt matching transformer to realize power combination,also adopt sub- resonance and no-welding transformer output mode. c. Inverter control circuit adopt fixed-angle-control,with a complete protection for lose of lock,over-current and over-voltage to make sure the equipment running safely and steadily. d. Use sealed box and install water cooling system and air conditioner cooling .   3. Air -water cooling system or water -water cooling system The circulation soft water cooling system to cool the exothermic parts of rectifier cabinet and inverter cabinet.          4. Center Control Console  With PLC and LCD Screen to achieve afar operation of solid state high frequency pipe mills and power regulation.It has speed-power closed-loop control function.   5. 2-D Ajdustable bracket or 3-D Adjustable bracket  6. Optical fiber  Advantages of China high frequency welding machine for steel pipe  1. Induction high frequency welding is much more efficient compared with vacuum tube welders. 2. Solid state welders have a compact and modular design. 3. Vacuum tube welders have a lifetime span. Solid state HF welders have semiconductor components, which has no life limit . So high frequency welder is more reliable compared with vacuum tube welders. 

Tube Mill DC Drive Cabinet Tube mill DC drive cabinet is mainly used for the control of DC motor of tube mill line. With merits of wide speed regulation, super dynamic performance,it can also achieve multiple motor linkage. The pipe mill DC drive cabinet has three series: computer-control stimulation model, full-digital euro drive original model and full-digital euro drive expansion model. For the euro drive model, we adopt American PARKER brand Euro to make sure the quality of machine. We are induction heating equipment manufacturer. Main technical data of pipe mill full-digital Euro DC drive cabinet Model Rated current Rated voltage Rated power OL-70A/460V 70A 460V 30KW OL-110A/460V 110A 460V 45KW OL-150A/460V 150A 460V 60KW OL-180A/460V 180A 460V 75KW OL-270A/460V 270A 460V 110KW OL-360A/460V 360A 460V 150KW OL-450A/460V 450A 460V 190KW OL-800A/460V 800A 460V 330KW