Industrial Machinery & Equipment

Original Megger BITE2P– Available at Navaro Calibration. The Megger BITE2P battery impedance test equipment with built-in printer analyzes the condition of lead-acid and nickel-cadmium battery cells with a capacity of up to 7,000 ampere-hours (Ah) for battery maintenance applications in the industrial, commercial, medical, telecommunications, aircraft, power utility, and military industries. Determines condition of lead-acid and NiCd cells up to 7000 Ah On-board Pass/Warning/Fail indications Robust, repeatable instruments On-line testing Each Unit Includes Transmitter Receiver Current Source Leads, 20 ft (6 m), fused Current Sensor, 2 in (50 mm) opening with 5 ft (1.5 m) lead CT Extension Cable Communication Cable Thermal Paper AVOLink for Windows AC Line Cord, 8 ft

Minimum Order: 1 bags

Chroma 19056 Hipot Analyzer, AC 10 Kv, RS-232, USB, 19056 Series Product Overview The Chroma 19056 Hipot Analyzer is a high-performance, versatile instrument designed for testing the dielectric strength of electrical components and assemblies. With its advanced features and capabilities, the 19056 is ideal for a wide range of applications, including: Production testing Quality control Research and development Field service Features and Specifications AC voltage output: 0 to 10 kV Output current: 0 to 10 mA Test modes: AC withstand, insulation resistance, leakage current Test time: 0 to 9999 seconds Pass/fail criteria: Adjustable Data logging: Internal memory and USB interface RS-232 and USB communication interfaces Compact and lightweight design

Minimum Order: 1 bags

Original Instek GPT-15004 – Available at Navaro Calibration. Product Overview: The Instek GPT-15004 is a versatile and comprehensive Hipot Tester and Safety Analyzer designed for testing electrical products and components. It combines AC, DC, IR, GB, and CG functions in a single instrument, providing a complete solution for safety and performance evaluation. Features: AC Hipot Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Dielectric withstand, insulation resistance, leakage current DC Hipot Test: Voltage range: 0 to 1500 VDC Current range: 0 to 100 mA Test modes: Dielectric withstand, insulation resistance, leakage current IR Test: Voltage range: 0 to 1000 VDC Resistance range: 0 to 1000 MΩ Test modes: Insulation resistance, continuity GB Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Ground bond resistance CG Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Ground continuity Specifications: Accuracy: ±0.5% of reading Resolution: 0.1 V, 0.1 mA, 0.1 MΩ Display: 4.3-inch color LCD Interface: USB, RS-232, Ethernet Safety: Complies with IEC 61010-1, IEC 61010-2-030

Minimum Order: 1 bags

Original Megger DLRO100X – Available at Navaro Calibration. A new addition to the comprehensive range of Megger Low Resistance Ohmmeters, the DLRO100 enables low resistance measurement, across multiple applications, in areas without access to mains power. The integral Li-on battery supplies a constant 100A current for up to 30 minutes or up to 360 Manual/Auto tests to enable enhanced productivity in remote locations. With a focus on user safety, advanced design features ensure the safe operation of the instrument in the most adverse conditions, including a CATIV 600V safety rating in accordance with IEC61010. The rugged design, intuitive interface and IP54 (lid open) rating ensure reliability and ease of use in the most arduous of conditions. Mains Only Internal Memory USB Data Download Dual Ground: Clamp Optional Rugged Design for Use in Demanding Environments Adjustable 10-100A Output, 4 Terminal Measurement 0.1μΩ to 2 Ω Measurement Range 0.1μΩ Resolution Accuracy of ±0.05 μΩ Between 0.1 μΩ and 10 μΩ, ±0.2% Between 10 μΩ and 2 Ω CATIV 600V Safety Rating Battery and Mains Powered Battery Capacity 360 Single Tests or up to 30 Minutes Continuous 1c00A output Memory Storage USB Download Capability Adjustable Current Ramp Rates and Test Duration Low Ripple D.C. IP Rating 67 (Lid Closed) IP54 (Lid Open Battery Operation Only) Large, Clear LCD Display Time and Date Stamped Memory for Recording of Results (999 Readings)

Minimum Order: 1 bags

1. Automatic feeding with adjustable brackets 2. Speed is adjustable for different products 3. 110mm hole diameter for SKD11/DC53 thread rolling dies 4. Max. Rolling pressure is about 1000KN 5. It is easy to operate and maintain the machine 6. CE, ISO9001-2008 Specification Working diameter 14-150mm Thread pitch 1.0-15mm Thread length In feed or Thru feed Spindle speed 16/21/27rpm (variable speed) Outside diameter of rolling die 220-300mm Inside diameter of rolling die 110mm Thickness of rolling die 250mm Feed stroke 0-20mm Mian motor 37KW Hydraulic motor 7.5KW Max rolling pressure 100T Supply voltage 380V 3P 50Hz Weight(reference) 8800(KG) Package Dimension(L*W*H) 2550*2450*2050mm Dimension(L*W*H) 2450*2350*1900mm Q1. Are you factory or trading company ? A1. We are factory of manufacturing thread rolling machine and dies by ourselves. Welcome to visit our factory, if possible. Q2. What is the delivery time ? A2. Usually 15-25 working days for machine, and 10-15 working days for dies. Q3. What is the warranty time for machine? A3. Usually 12 months from B/L date. Q4. What is the payment term? A4. T/T, Western Union, Money Gram, Alipay, PayPal. 50% as deposit, and 50% before shipping. Q5. Is it possible to design and produce automatic loading & unloading devices? A5. Yes, Engineer can design special auto feeding device according to your products. But please provide the drawing of your products before that. Q6. How will you solve problems that we face during using your machine? A6. A. Please provide necessary videos and pictures that can show the problems, our engineers will check and give corresponding solutions. B. Will arrange engineers to solve problems at the scene, if possible. WhatsApp&Phone: +86-13312913043 QQ: 3833890347 Wechat: szfeda06

Minimum Order: 1 bags

POWER GRAPHIC DESIGN UK: is a European wholesaler and distributor of brand-new Summa and Graphtec plotters based in the UK. Contact us by email to check stock availability. These are brand-new plotters with a 5-year warranty. Our latest range of innovative vinyl cutters from Graphtec and Summa are designed to empower creators and businesses with unmatched precision and versatility. From intricate designs to large-scale projects, these vinyl cutters redefine what's possible in the world of cutting technology. Choose your next cutter from the industry leaders Graphtec and Summa. Email: powergraphicdesignuk@gmail.com Tel: +447431226182 WhatsApp: +447770593401 Summa S3 D75 €2000 Summa S3 D120 €2600 Summa S3 D140 €3300 Summa S3 D160 €4000 Summa S3 TC75 €3500 Summa S3 TC140 €4000 Summa S3 TC160 €6000 Summa S3 S75T  €2600 Summa S3 S120T €3400 Summa S3 S140T €4700 Summa S3 S160T €5000 Summa S1 D60 €1000 Summa S1 D120 €2800 Summa S1 D140 €3500 Summa S1 D140 FX €2200 Summa S1 D160 €4800 Graphtec FC9000-75 with Stand & Media Basket €2500 Graphtec FC9000-100 with Stand & Media Basket €3000 Graphtec FC9000-140 with Stand & Media Basket €3500 Graphtec FC9000-160 with Stand & Media Basket €4550 Graphtec CE8000-40 €1000 Graphtec CE8000-60 with Stand €1200 Graphtec CE8000-130 with Stand €2100 Graphtec CE7000-40 Desktop Model €1000 Graphtec CE7000-60 Desktop Model €1000 Graphtec CE7000-130 with Stand €2500 Graphtec CE7000-160 with Stand €3000 Graphtec CE7000-60 with Stand & Media Basket €1500 Graphtec CE7000-130 with Stand & Media Basket €2200 Graphtec CE7000-160 with Stand & Media Basket €3100 Graphtec CE8000-130AP with Stand and Basket €3500 Graphtec CE7000-130AP with Stand and Basket €3600 Graphtec CSX530 Scanner €1500 Graphtec CSX550 Scanner €2100 Warehouse Address: POWER GRAPHIC DESIGN UK 22 Homerton Industrial Estate Snetterton , NR16 2JU United Kingdom

Minimum Order: 1 bags

In modern industrial production, efficiency and safety are the core concerns of enterprises. The Pedestal Rockbreaker launched by YZH, with its excellent performance, solves production problems for enterprises and helps open a new chapter in efficient production. The WHC960 Pedestal Rockbreaker is mainly used to solve the problem of material blockage in ore production. It is fixed at the grid screen and discharge port of large crushing equipment to efficiently and safely perform secondary crushing on blocked large stones. Main parameters of WHC960 Pedestal Rockbreaker： Model No.：WHC960 Boom weight(without hammer)：8481kg Max.Horizontal Working radius：11920mm Max.vertical working radius：9600mm Min.vertical working radius：3360mm Max.Height:7200mm The Features of  WHC960 Pedestal Rockbreaker : · Products manufactured to ISO 9001:2008 and CE standards · Designed to optimise stress distribution · Optimally combines light weight and a high capacity · User friendly remote controls allow for smooth and agile operation · Shock absorbing pedestal mounting · Heat treated conical pins · Breaker anti-lunge cushioning within the hydraulic system · Unlimited visibility from the cabin or operator stand · Simple assembly, safe, quick and easy operation The  Benefits of WHC960 Pedestal Rockbreaker: · Long term plant production is vastly improved when the primary station is equipped with a rock breaker · Bridging is eliminated, maintaining uninterrupted flow of material through the crusher · Downtime due to build ups is drastically cut, ensuring a steady flow of material through the primary station · Payback time on the investment is usually very short due to the vast economic benefit as a result of increased productivity · The safest way to clear the crusher cavity · Endures tough duty cycles in demanding applications Purchase Notice: Warranty period: 1 year After sales service: During the warranty period, if there are quality issues, we will be available on call Transportation methods: Various transportation methods are accepted Packaging method: Suitable for various types of transportation

pedestal rock breaker boom system In the mining production scenario, the crusher feeder and underground chute mouth lattice screen blockage jamming, as well as the crushing of oversized ore problems, seriously restricting the production efficiency. YZH line launched a pedestal rock breaker boom system has become the key to break the game, which model BA300 pedestal rock breaker boom system is with excellent performance to stand out, the next will take you in-depth understanding. Characteristics of BA300 1.Section area of Boom:200×200×16MM 2.Boom weight (without hammer):1411kg 3.Rectangular tube design, steel structure is more stronger 4.Reinforced pivot point, oversized pin shaft, and heat-treated steel bushings ensure superior strength and precision 5.170°rotation Advantages , Green environmental protection and energy saving.pedestal rock breaker boom system can achieve the dual purpose of no emission pollution and low energy consumption. pedestal rock breaker boom system adopts advanced hydraulic power system, in the process of crushing materials, mainly through the electricity driven hydraulic to work, to avoid fuel to provide power to the atmospheric environment pollution. In terms of energy consumption, the pedestal rock breaker boom system uses optimised hammer design and energy efficient motor, combined with the intelligent control system to accurately adjust the operating power of the pedestal rock breaker boom system according to the characteristics of the material and crushing demand, avoiding the waste of energy. Compared with the traditional crusher, its energy consumption can be reduced by 30% - 50%. This low energy consumption is not only in line with the goal of energy saving and emission reduction, but also saves a lot of electricity and fuel expenses for enterprises and reduces production and operation costs. Reduce the cost of use.Good maintenance performance is a highlight of the pedestal rock breaker boom system, which effectively saves the cost of use of the enterprise. pedestal rock breaker boom system adopts modular design concept, the structure of each component is simple, easy to disassemble and install. When the equipment malfunctions or needs to replace the worn parts, the maintenance personnel can quickly locate the problem and carry out targeted repair and replacement, which greatly shortens the maintenance time and reduces the production loss caused by equipment downtime. Selection of strong and wear-resistant materials.In addition, the pedestal rock breaker boom system selects high-strength and excellent wear-resistant materials to manufacture key components, such as the liner of the crushing chamber, the hammer head, the rotary base, etc., which have relatively low wear and tear and prolong the replacement cycle after a long time of use. At the same time, the lubrication system of the pedestal rock breaker boom system is carefully designed and adopts centralised lubrication, which can provide lubrication for all moving parts in a regular and quantitative manner, effectively reducing the friction loss between the parts and further improving the service life of the equipment. According to statistics, compared with the same type of crusher, the maintenance cost of pedestal rock breaker boom system can be reduced by about 40%, which significantly improves the economic benefits of enterprises. Model No. Unit BA300 Boom weight (without hammer) kg 1411 Max.Horizontal working radius mm 4880 Max.Vertical working radius mm 3270 Min.Vertical working radius mm 1570 Max.Height mm 2710 Max .Working depth mm 3170 Rotation ° 170 Pedestal Size mm 1030×720 Power of Hydraulic Power Unit Kw 18/22/30

Minimum Order: 1 bags

In today's industrial field, the importance of automation equipment is increasingly prominent. The Pedestal Boom Rockbreaker of YZH has become an ideal choice for many enterprises to achieve automated production due to its excellent performance and stable quality.Below is an introduction to the Pedestal Boom Rockbreaker WHB710 . The Pedestal Boom Rockbreaker WHB710 adopts advanced design concepts, and the main structure is welded from high-quality steel plates, with strong rigidity, good torsional resistance, and the ability to withstand high-intensity working loads. The upper arm and second arm shells are made of high-strength, fine- grained steel plates, which have excellent anti brittle fracture safety performance, ensuring stable operation under complex working conditions. The arm group steel structure adopts a large-sized box design and optimizes the local externally reinforced steel plates to better withstand lateral and torsional loads. High performance shock-absorbing components are equipped around the equipment base, effectively reducing the damage of impact loads to the entire machine and foundation structure, and extending the service life of the equipment. In terms of control, this Pedestal Boom Rockbreaker WHB710 has diversified intelligent control methods, including video surveillance and remote control, with a remote control distance of up to 10-20km. Configure high-performance controllers to achieve multi parameter fusion and flexible control, enabling precise positioning and meeting the needs of different production scenarios. At the same time, it is equipped with high-quality hydraulic breakers, significantly improving work efficiency. The whole machine has undergone system integration optimization design, with better performance and high maintainability. The failure rate is reduced by 85% compared to traditional diesel equipment, saving the enterprise a lot of maintenance costs and downtime. The core components of YZH Pedestal Boom Rockbreaker WHB710 are equipped with international brand configurations, ensuring reliable quality. New simulation optimization design, reasonable layout, high safety factor, can meet uninterrupted work. Moreover, it is versatile and can be equipped with multiple front-end tools. Through modular design, it can quickly adapt to different customer needs and can also work in harsh environments such as corrosion, explosion prevention, and high altitude for a long time. In addition, the robotic arm adopts hydraulic vibration crushing, driven by an electric motor, which is clean and energy-saving. The energy consumption cost is reduced by more than 60% compared to traditional diesel equipment, which meets environmental requirements and contributes to sustainable development while reducing operating costs for enterprises. Purchase Notice: Warranty period: 1 year After sales service: During the warranty period, if there are quality issues, we will be available on call Transportation methods: Various transportation methods are accepted Packaging method: Suitable for various types of transportation

Instek GPT-15004: Comprehensive Hipot Tester and Safety Analyzer for Electrical Equipment - Best Price at Jansen Calibration . Product Overview: The Instek GPT-15004 is a versatile and comprehensive Hipot Tester and Safety Analyzer designed for testing electrical products and components. It combines AC, DC, IR, GB, and CG functions in a single instrument, providing a complete solution for safety and performance evaluation. Features: AC Hipot Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Dielectric withstand, insulation resistance, leakage current DC Hipot Test: Voltage range: 0 to 1500 VDC Current range: 0 to 100 mA Test modes: Dielectric withstand, insulation resistance, leakage current IR Test: Voltage range: 0 to 1000 VDC Resistance range: 0 to 1000 MΩ Test modes: Insulation resistance, continuity GB Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Ground bond resistance CG Test: Voltage range: 0 to 1500 VAC Current range: 0 to 100 mA Test modes: Ground continuity Specifications: Accuracy: ±0.5% of reading Resolution: 0.1 V, 0.1 mA, 0.1 MΩ Display: 4.3-inch color LCD Interface: USB, RS-232, Ethernet Safety: Complies with IEC 61010-1, IEC 61010-2-030

Minimum Order: 1 bags

Chroma 19071 Hipot Tester: Precision AC Testing with Sentry 10 Plus and RS- 232 Connectivity - Best Price at Jansen Calibration . Product Overview: The Chroma 19071 Hipot Tester is a high-performance AC hipot tester designed for testing the dielectric strength of electrical products. It features advanced Sentry 10 Plus software and RS-232 connectivity for remote control and data logging. Features and Specifications: AC Output: 0 to 5 kV, 0 to 10 kV, or 0 to 15 kV Test Current: Up to 100 mA Test Modes: Dielectric withstand, insulation resistance, leakage current Sentry 10 Plus Software: Intuitive user interface, automated test sequences, and data logging RS-232 Connectivity: Remote control and data transfer Safety Features: Interlock protection, overcurrent protection, and ground fault detection Compact and Portable: Lightweight and easy to transport What’s in the Box: Chroma 19071 Hipot Tester Test leads Grounding cable Sentry 10 Plus software RS-232 cable User manual

Minimum Order: 1 bags

Keysight 34470A Digital Multimeter: Unparalleled Precision for Critical Measurements - Best Price at Jansen Calibration . Product Overview: The Keysight 34470A Digital Multimeter (DMM) is a high-performance instrument designed for precision measurement in demanding applications. With its advanced features and exceptional accuracy, it empowers engineers and technicians to confidently tackle complex measurement challenges. Features and Specifications: High Accuracy: 0.0025% basic DCV accuracy Wide Measurement Range: DCV, ACV, DCI, ACI, Resistance, Capacitance, Frequency, Temperature Fast Measurement Speed: Up to 1000 readings per second High Resolution: 6.5-digit display True RMS Measurement: Accurate AC measurements on non-sinusoidal waveforms Built-in Data Logging: Store up to 10,000 readings GPIB, USB, and LAN Interfaces: Remote control and data transfer Rugged and Reliable: Designed for harsh environments What’s in the Box: Keysight 34470A Digital Multimeter Test leads Alligator clips User manual Benefits: Precise Measurements: Ensures accurate and reliable results for critical applications. Versatile Functionality: Covers a wide range of measurement needs, eliminating the need for multiple instruments. Fast and Efficient: Speeds up testing and troubleshooting processes. Data Management: Simplifies data storage and analysis. Remote Control: Enables automated testing and data acquisition. Rugged Construction: Withstands harsh conditions, ensuring long-term reliability.

Minimum Order: 1 bags

Teledyne LeCroy CP030: Precision Current Probe for AC/DC Measurements - Best Price at Jansen Calibration . Product Overview: The Teledyne LeCroy CP030 is a high-performance current probe designed for precise and reliable current measurements in a wide range of applications. With its advanced features and exceptional specifications, the CP030 empowers engineers and technicians to accurately capture and analyze current waveforms. Features: AC/DC Current Measurement: Measures both AC and DC currents with high accuracy. Wide Measurement Range: Covers a broad range of currents from 10 mA to 30 A. High Bandwidth: 50 MHz bandwidth enables capture of fast-changing current waveforms. High Voltage Rating: 300 V CAT1 safety rating ensures safe operation in high-voltage environments. Compact Design: 5mm probe tip diameter allows for easy access to tight spaces. 50 A Peak Current: Captures transient currents up to 50 A. CP Series Compatibility: Compatible with Teledyne LeCroy oscilloscopes and other instruments in the CP Series. Specifications: Measurement Range: 10 mA to 30 A Bandwidth: 50 MHz Voltage Rating: 300 V CAT1 Probe Tip Diameter: 5mm Peak Current: 50 A Accuracy: ±1% of reading Output Impedance: 1 MΩ Dimensions: 150mm x 30mm x 20mm Weight: 100g

Minimum Order: 1 bags

Tektronix TAP4000: 4 GHz Active Probe for Precision Measurements - Best Price at Jansen Calibration . Product Overview The Tektronix TAP4000 is a high-performance active probe designed for use with oscilloscopes. It offers a wide bandwidth of 4 GHz, a high input impedance of 40 kohm, and a low input capacitance of 0.8 pF. This makes it ideal for probing high-speed signals in a variety of applications, including digital design, power electronics, and telecommunications. Features 4 GHz bandwidth 10X attenuation 0.8 pF input capacitance 30V input voltage range 40 kohm input impedance TekVPI interface 1.3m cable length Benefits The TAP4000’s high bandwidth and low input capacitance make it ideal for probing high-speed signals without distorting the waveform. The high input impedance minimizes loading on the circuit under test, ensuring accurate measurements. The TekVPI interface provides seamless integration with Tektronix oscilloscopes, making it easy to set up and use. Value The TAP4000 is a valuable tool for engineers and technicians who need to probe high-speed signals. It offers a combination of high performance, ease of use, and affordability that makes it an excellent choice for a wide range of applications.

Minimum Order: 1 bags