Industrial Machinery & Equipment

Tower crane is widely used in building construction projects. It is mainly used to handle construction materials vertically and horizontally. Traditional tower crane needs huge concrete foundation. It is usually used in high-rise building project to handle large amount of construction materials efficiently within a large working range. But there are also huge demands for portable tower cranes in developing countries. There are a lot of low-rise building projects where they just need tower crane with relatively lower handling capacity, efficiency and budget. To meet the demands of market, we developed our mobile tower crane. Our Mobile Tower Crane Features 1) No need concrete foundation; 2) Remote control; 3) Easy to erect; 4) Easy to transport.

Product Description Mobile asphalt mixing plant can be categorized into two types, one is drum type and the other is compulsory type. For drum type, we use drying drum to dry aggregates and mix them with bitumen. No ore powder will be used. It is usually used for small and low-level road construction. For compulsory type, there is mixer to mix all the materials like stones, ore powder and bitumen. All materials will be weighed before being discharged into mixer to ensure the accuracy of the asphalt formula. Usually, it is used for high-standard road construction. We now have mobile asphalt mixing plant with the capacity from 25tph to 100tph. Welcome to contact us for details and quotations. Specification of mobile asphalt plant Model MDHB25 MDHB40 MDHB60 MDHB80 MDHB100 Production Capacity (T/h) 25 40 60 80 100 Mixing Type Continuous Continuous Continuous Continuous Continuous Dust Remove Effect (mg/Nm3) ≤100 ≤100 ≤100 ≤100 ≤100 Fuel Consumption (kg/t) (Oil) 5.5-7 5.5-7 5.5-7 5.5-7 5.5-7 Fuel Consumption (kg/t) (Coal) 10-13 10-13 10-13 10-13 10-13 Aggregate Weighing Accuracy(%) ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 Bitumen Weighing Accuracy(%) ±1 ±1 ±1 ±1 ±1 Total Power (kw) 50 75 128 165 200

ER-QA-03B: 1. Bias repeatability: 10-30μg; 2. Scale factor repeatability: 15-50ppm; 3. Class II non-linearity repeatability: 10-30μg/g2. ER-QA-03B Wide-Range Quartz Accelerometer Introduction ER-QA-03B Wide-Range Quartz Accelerometer for aerospace with wide-range, high accuracy, high reliability, not only can be used in aviation and aerospace inertial test but also in both static and dynamic acceleration measurement. In addition, the accelerometer uses a temperature sensor, which the operator can use to compensate bias and scale factor parameters to reduce the influence of temperature factors. Applications Flight control Stabilization Aircraft navigation systems Attitude heading reference systems (AHRS) Ground vibration testing (GVT)-wind tunnel testing

ER-TS-4158DI Features: 1. Single axis tilt monitoring; 2. Full range accuracy 0.1°, resolution 0.01°; 3. Output 4~20mA, 0~20mA, 0~24mA optional. Introduction ER-TS-4158DI Digital Single Axis Tilt Meter is a small volume MEMS uniaxial current output inclinometer sensor, the output current is 4~20mA, 0~20mA, 0~24mA optional. Due to the built-in micro-electromechanical production process inclination device, the product is small in size, low in power consumption, industrial-grade working temperature is -40~+85℃, and long-distance transmission can reach more than 2500 meters. The strong ability to resist external electromagnetic interference makes it suitable for long-term work in harsh industrial environments. The product adopts non-contact measuring principle that can output the current attitude and inclination in real time, the accuracy can reach 0.1°. It is easy to use and no need to find the relative change of the two surface installation, which is the ideal choice of industrial equipment, platform attitude measurement.

PRODUCT DESCRIPTION 5504341 5659737 K7V180DTP E336 E336GC 380DK HYDRAULIC PUMP Main pump PRODUCT DESCRIPTION Model:5504341 5659737 K7V180DTP E336 E336GC 380DK HYDRAULIC PUMP Main pump Category: Hydraulic Pump Brand: CAT Place of Origin:Other Country Condition: Original & Oem Warranty: 12 months MOQ: 1 pcs Production Capacity: 1000pcs /Month Standard or Nonstandard: Standard Payment Term: L/C,T/T, Western Union, Tradeassurance Delivery Time: 1-3 days (depend on order) Means of Transport: By Sea, Air or DHL/FEDEX/TNT/EMS Guarantee: We will check and send detailed pictures to buyers for confirmation 5504341 5659737 Excavator Hydraulic Pump K7V180DTP For E336 E336GC 380DK 0 5504341 5659737 Excavator Hydraulic Pump K7V180DTP For E336 E336GC 380DK 1 5504341 5659737 Excavator Hydraulic Pump K7V180DTP For E336 E336GC 380DK 2 5504341 5659737 Excavator Hydraulic Pump K7V180DTP For E336 E336GC 380DK 3

Product Description: CNC Machined Parts are computer-aided machining parts and numerically- controlled machining parts, which are manufactured through CNC-controlled machining processes. They are precision machined components made from materials such as aluminum, steel, brass, etc. The delivery method for these components is usually DHL, FedEx, UPS, etc., and the lead time is usually 7- 15 days. We also provide 100% quality inspection before shipment to ensure the quality of our products. The drawing format for these CNC machined parts can be PDF, DWG, IGS, STEP, etc. Features: Product Name: CNC Machined Parts Size: Customized Surface Treatment: Anodizing, Plating, Painting, Etc. Tolerance: ±0.01mm Delivery Method: DHL, FedEx, UPS, Etc. Drawing Format: PDF, DWG, IGS, STEP, Etc. Computer-aided machining parts Precision machined parts Computer-Numerically-Controlled parts Technical Parameters: Property Description Quality Control 100% Inspection Before Shipment OEM/ODM Acceptable Material Aluminum, Steel, Brass, Etc. Surface Treatment Anodizing, Plating, Painting, Etc. Drawing Format PDF, DWG, IGS, STEP, Etc. Tolerance ±0.01mm Lead Time 7-15 Days Packaging Standard Export Carton Or Customized Application Automotive, Aerospace, Medical, Etc. Size Customized Applications: Yuanwenyu CNC Machined Parts are numerically-controlled machined parts, computer-aided machined parts and precision machined parts with a brand name of yuanwenyu. The model number of the product is 1X893, with a minimum order quantity of 50 pieces. The price of the product ranges from $2.35 to $12.68 per piece with packaging details including EPE foam, anti-rust paper, stretch film and plastic bag with a cardboard box. The delivery time is 1 and payment terms are 1. The product is provided with a supply ability of 1 million pieces per month with 100% inspection before shipment. Surface treatments like anodizing, plating or painting can be done with the product. A minimum order quantity of 1 piece is accepted with a size that can be customized according to the needs of the customer. The product can be used in many applications like automotive, aerospace and medical. Customization: Brand Name: yuanwenyu Model Number: 1X893, OEM Place of Origin: Guangdong, China Certification: 1 Minimum Order Quantity: 50 pieces Price: $2.35 - $12.68/pieces Packaging Details: EPE foam/ Anti-Rust Paper/ Stretch Film/ Plastic bag +Carton Delivery Time: 1 Payment Terms: 1 Supply Ability: 1000000 Piece/Pieces per Month Surface Treatment: Anodizing, Plating, Painting, Etc. Size: Customized OEM/ODM: Acceptable Material: Aluminum, Steel, Brass, Etc. Tolerance: ±0.01mm Numerically-controlled machining parts: Computerized Numerical Cutting parts, Precision machined parts Support and Services: Technical Support and Service for CNC Machined Parts We provide comprehensive technical support and service for our CNC machined parts. Our team of experienced engineers and machinists will be able to assist you in every step of the process, from design to production. We can provide detailed advice and guidance on the best materials, processes, and machining methods to use for your specific project. We also offer technical assistance with any modifications or design changes that need to be made during the fabrication process. Our goal is to provide you with the highest quality machined parts in a timely and cost-effective manner. If you have any questions or need any assistance, our team is always available to help.

Product Description Excavator Travel Motor Komatsu PC45 PC50 final drive motors Product Description Product name Exacavator travel motor Applicable model Final DrivePC45 PC50 Brand Chinese brand, crystal Condition New, We produce ourselves Hole of frame Φ14*9 Hole of sprocket Φ14*12 Dia of frame 230 Dia of sprocket 262 Gross Weight 70KG Package size 36*36*50 Payment term TT bank transfer, Western Union,L/C Warranty time 12 months Delivery time Have in stock, within 3-5 days to ship out it Product parameter diagram: Smooth Start Excavator Travel Motor PC45 PC50 Final Drive Motors 0 Product operation method First of all, it is crucial to be familiar with the controls and console of the excavator. The control lever is used to control the walking direction and speed of the excavator, and the control table is equipped with various indicating instruments and control buttons for monitoring and controlling the working state of the walking motor. Before operation, it is important to understand the function of each lever and control table to ensure that you can operate the excavator walking motor correctly. The smooth start and stop of excavator travelling motor is the key to ensure safety and operation efficiency. When starting, slowly push the walking rod, gradually increase the throttle, to avoid the machine impact caused by rapid start. When stopping, slow down the push of the walking rod and gradually reduce the throttle to ensure a smooth stop of the excavator and avoid collision or loss of control. The excavator walking motor has multiple speeds to choose from, and it is very important to adjust the speed reasonably according to the work needs. In a narrow working area, choose a low gear, which is conducive to handling and maneuverability; On long distance driving or flat roads, you can choose high gear to improve work efficiency. According to the actual work situation, flexibly select different gears to ensure efficient and safe walking. Steering is an important part of excavator motor operation. Left-right steering requires the operation of the walking rods on both sides to control the rotation of the corresponding tracks. When turning, the working space and terrain conditions should be accurately judged, and the excavator should be flexibly rotated to avoid collision or getting into trouble. Reduce the speed at the turn to maintain stability and balance. Finally, safe driving is the most important principle in the operation of excavator walking motor. During operation, always pay attention to the surrounding environment and staff to avoid accidents and injuries. Operate in strict accordance with the operating procedures, do not overload, do not speed, do not exceed the range of driving, to maintain the normal operation of the machine.

6D170 Full Gasket kit For komatsu Spare Parts ENGINE TYPE 4D94 S6D95 6D95A S6D107 6D125 4D94E 4D95 4D98E S6D108 S6D125 4D94LE 4D95L S6D102 S6D110 6D140 4D92E 4D95K S6D105 4D120 S6D155 6D170 S6D170 4D95S-W-1G-T 4D95L-1Z S4D95L-1A 2D68E-3A 3D72 3D75-2D 3D82AE-3D 3D84-1C 2D68E-N3CB 3D72-2F 3D78-1A 3D82AE-3E 3D84-1FA 2D76 3D72-2G 3D78-1E 3D82AE-3F 3D84-1GA Interfaces make it easier to write unit tests and createmock objects for testing purposes.This is particularly valuable in Full Gasket applications where testing is crucial. Interfaces allowyou to define a contract that classesmust adhere to. This promotes a clearunderstanding of how different parts ofyour application interact. Through interfacesyou can achieve polymorphism. Thismeans you can use a reference of aninterface type to refer to objects of different classes, thus achieving moreflexible code. Overall, using interfaces in Full Gasket development promotes clean maintainable.and extensible code by separating the contract from the implementation,enabling easier testing and reducing code dependencies. 100% New Excavator Engine Parts 6D170 Full Overhaul Gasket Set 0

ER-MG2-300/400, a Navigation Grade MEMS gyro sensor up to 400deg/s measurement range and 0.05°/hr bias instability, is specially designed for precision attitude & azimuth measuring, positioning, navigating, guidance in high performance IMU /AHRS/ GNSS-aided INS, aerial/marine/land mapping/survey system/UAV/AUV and navigation grade MEMS weapon system. With the high dynamic measurement range and high precision, ER-MG2-300/400 is a cost effective, robust, reliable, small size, light weight, low power, most suitable replacement of medium-low navigation grade FOG/DTG with high dynamic azimuth & attitude measuring , inertial positioning and navigation function in aerial, marine manned, or unmanned carriers. The ER-MG2-300/400 High Precision Navigation MEMS Gyroscope is a single-axis MEMS angular rate sensor (gyroscope), capable of measuring angular velocity up to a maximum of ±400°/s with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word. The ER-MG2-300/400 with an advanced, differential sensor design rejects the influence of linear acceleration, enables to operate in exceedingly harsh environments where shock and vibration are present. The ER-MG2-300/400 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (−45°C to +85°C).

ER-TS-32600-Modbus Features: 1. Dual axis monitoring (single axis optional); 2. Full range accuracy 0.01°, resolution 0.002°; 3. Volume (94*74*64mm) (customizable). ER-TS-32600-Modbus High Performance Wireless Transmission Tilt Sensor is a wireless inclination sensor with ultra-low power consumption, small size and high performance, which is aimed at the industrial application of users without power supply or real-time dynamic measurement of object attitude angle. Powered by lithium battery, based on Internet of things technology Bluetooth and ZigBee (optional) wireless transmission technology, all internal circuits have been optimized and designed, and various measures such as industrial MCU, three proof PCB board, imported cable, wide temperature metal shell are adopted to improve the industrial level of the product. With good long-term stability and small zero drift, it can automatically enter the low-power sleep mode, so as to get rid of the dependence on the use environment. The product has compact structure, precise design, recompensation for temperature and linearity, and integrated comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc. it is simple and convenient to use. The wireless digital signal transmission method eliminates the cumbersome wiring and noise interference caused by long cable transmission; The industrial design has extremely high measurement accuracy and anti-interference ability. The wireless sensor nodes can form a huge wireless network, support thousands of measuring points to monitor the inclination at the same time, and support professional computer software. Without field survey, it can measure and record the state of the measured object in real time; The safety monitoring system is suitable for remote real-time monitoring and analysis of industrial sites, dilapidated houses, ancient buildings, civil engineering, tilt deformation of various towers and other needs.

Cylindrical roller bearings are separable, easy to mount and dismount, feature more outstanding especially when they are used on bearings requiring interference fit between inner and outer rings with the shaft and housing. Cylindrical roller bearing is contacted with the revision line between the rollers and the raceway, which is of elimination of edge stress. Comparing with the ball bearings with same boundary dimensions, cylindrical roller bearings have larger radial carrying capacity. In structure, this type of bearing is more suitable for high speed rotation Cage material: When the outer diameter is less than (inclusive) 400mm, solid brass cage or steel press cage are adopted for single row cylindrical roller bearing. When the outer diameter is more than 400mm, brass cage and pin-type cage are adopted for four row cylindrical roller bearing. Cylindrical roller and race for line contact bearing. Load capacity is big, mainly bear radial load. Roller and ring guard friction small, suitable for high speed rotation. May according to the ring presence of guard, NU, NJ, NUP, N, NF, such as single row cylindrical roller bearings, double row cylindrical roller bearing and NNU, NN and other. The WZZG bearing inner ring and outer ring is separable structure. Application Automotive, tractor, machine tool, electric machine, water pump, cranes, elevator, agricultural machinery, textile machinery, rolling mill, mining, metallurgical, plastic machinery ect.

Tapered roller bearings are made up of four interdependent components: The inner ring, or cone; the tapered rollers, or rolling elements; the roller retainer, or cage(collectively known as the cone assembly); and an outer race, or cup. They are designed and manufactured to ensure that their conical rollers and raceways are arranged so that their contact surfaces converge at a common apex on the bearing’s axis. The larger this contact angle the greater the bearing’s loading capacity. The angular construction of single row tapered roller bearings provides a high capacity for radial, axial, and combined loads.Tapered roller bearings have window-type pressed steel cage with no marking. Others types could be specifically designed on request. FEATURES Dimensional Stability Long Life Even In Contaminated Lubricant Durable Steel Cage Typical Applications Tapered roller bearings are used for heavy-duty, moderate speed applications. Typical applications that will benefit from these durable bearings include: Agriculture, Construction and Mining Equipment Various Axle Systems Conveyance Vehicles Gear Box, Engine Motors, Reducers

Structure & introduction The outer ring of drawn cup needle roller bearing is punched with the high- quality steel sheet. The outer ring has thin wall. The drawn cup needle roller bearing has the characteristics of small radial section area, large load carrying capacity, less inertia and economic manufacture. It is suitable for small section height, or when the housing bore isn't used for raceway, this type is recommended to use. The bearing is assembled into the housing bore under a certain pressure without further axial location. The drawn cup needle roller bearing generally takes its shaft diameter as the internal raceway. However, the proper LR type inner ring can be used in accordance with application condition. The drawn cup needle roller bearing has two structures-with retainer and with full of needles. They are divided into opened type and close-end type. The structure with retainer has the single seal ring and double seal ring. The structure with full of needles has a large load carrying capacity.

Double row self-aligning ball bearings, the inner ring has two raceways, the outer ring has a spherical raceway, the center of curvature coincides with the axis of the bearing, and has self-aligning performance. Therefore, when the mechanical bearing is bent under load or the axis of the inner ring is inclined relative to the axis of the outer ring due to machining and installation errors, the normal operation of the mechanical device can still be guaranteed. Double row self-aligning ball bearings are mainly used to bear radial loads, but they can also bear smaller axial loads while mainly bearing radial loads, but cannot bear pure axial loads. Self-aligning double row ball bearings are designed for applications with severe misalignment in mounting or shaft deflection. The concave raceway of the outer ring combined with the two rows of balls allows operation over a wide range of contact angles. https://www.wzzgbearing.com/