Industrial Machinery & Equipment

Product Description plastic recycling machinery suppliers Product Overview This WASTE PLASTIC PE PP FILM/BAGS RECYCLING MACHINE is designed and manufactured by MOOGE TECH, which is widely used for waste plastic PE/LDPE/LLDPE film, PP woven bag, PP Jumbo bag, etc. The waste dirty material go through crushing, friction washing, washing, dewatering, hot air drying process will turn to be clean flakes for pelletizing. The line can be displayed "L" or "U" shape according to clients' workshop. We can also customize the washing line components according to client's material and product requirement. Product Specification Model Capacity Installed Power Hot Washing Water Supply Area Required(L*W*H) ME-300 300 kg/hr 200 kw Optional 6-8 m3/hr 40*4*5 m ME-500 500 kg/hr 350 kw Optional 8-10 m3/hr 40*4*5 m ME-1000 1000 kg/hr 600 kw Optional 15-20 m3/hr 55*6*6 m

Atlas Copco Air End Air End Compressor Finishing We can manufacture the full range of Atlas 146 series(GA55-GA110) air end and it's housing. We have state-of-the-art precision manufacturing equipment and three-coordinate measuring machines. We are always ready to provide you the qulified products you are desiring. we don't simply view you as simply as a client, we believe your business success is our success too and we desire for you to go as far as you can image, for that reason, it is our responsibility to provide you with the best products and services that work, both now and in the future. Group products, we can provide you with Atlas Pneumatic air compressors and spare parts. GA55-GA110 Atlas Copco Air End Compressor Finishing Stainless Steel 0 Product Name Atlas Copco air end Condition: New Color Customized Color Model: GA55-GA110 Material Steel/Stainless Steel GA55-GA110 Atlas Copco Air End Compressor Finishing Stainless Steel 1 GA55-GA110 Atlas Copco Air End Compressor Finishing Stainless Steel 2 GA55-GA110 Atlas Copco Air End Compressor Finishing Stainless Steel 3 GA55-GA110 Atlas Copco Air End Compressor Finishing Stainless Steel 4

Production Description YS-350A/450A Automatic Die Cutting Label Machine Additional functions: 1. hot stamping 2.hole punching 3.lamination Standard functions: unwinding-die cutting-waste discharging-cutting into pieces-rewinding The paper adhesive label, nylon membrane trademark and the radium anti-fake trademark.this machine is matching with different printing machine and slitting machine, such as roll paper printing machine,flexo printing machine,screen printing machine,gravure printing machine. This machine is widely used in electronic line, adhesive product line and so on. Technical parameters: model YS-350A YS-450A Max. Feeding width 320mm 420mm Cutting area 300*350mm 400*450mm Cutt , ing speed 30-220 press/min 30-200 press/min Position accuracy ±0.10mm ±0.10mm Po , wer of main motor 2.2kw 2.2kw Size(L*W*H) , 2750*1250*1400 3000*1500*1450mm , Unwinding/rewinding diameter 550mm 550mm Voltage< , br> 220/380v 220/380v Total power 4kw 4.5kw weight 1700kg 2000kg YS-350A Label Automatic Platen Die Cutting Machine 0 YS-350A Label Automatic Platen Die Cutting Machine 1 Features: This machine is insistent of platen pressing structure, servo system control the material feeding and forwarding, the photoelectric eyes track the material, unwinding-die cutting-waste discharging-sheet cutting-rewinding all is completed in one turn, all are control by PLC control system. Packing and Shipping YS-350A Label Automatic Platen Die Cutting Machine 2 Exhibition YS-350A Label Automatic Platen Die Cutting Machine 3 YS-350A Label Automatic Platen Die Cutting Machine 4 YS-350A Label Automatic Platen Die Cutting Machine 5 FAQ YS-350A Label Automatic Platen Die Cutting Machine 6

Pallet block making machine is specialized in producing dragging tray matting foot and protective layer matting blocks. As wood matting blocks are used for transportation and storage, people’s demand is relatively high. Therefore, the matting machine is also supported by many customers.

Minimum Order: 1 bags

Higher Ball Formation Rate Fertilizer Pelletizer Organic Fertilizer Granulating Machine The new type organic fertilizer granulator is a kind of granulating machine which can make the material into a specific ball shape. It adopts the new process design principle of wet continuous push rod granulation. When the raw materials enter the granulator, the raw materials are first made into semi- finished particles by the principle of stirring teeth, and then they are put into the rotary drum granulation part for secondary granulation. The pelletizing rate can reach 99% and the finished products are all round balls. Compared with other granulators, this new granulator not only improves the pelletizing rate, but also greatly improves the output of finished products. It is a good choice for new and old customers. Working principle : Use the high speed of rotation of mechanical blending force and the occurred air power, realize the process of the fine powder continuous being blended, granulated, balled, densified,thereby achieving the purpose of granulation. The shape of granule is spherical, and the size of the granule can be adjusted according to the mixing amount of materials and the main shaft speed, the lower the mixing amount, the higher the speed of rotation, the smaller the granule,and vice versa. Model TDJZ-600 TDJZ-800 TDJZ-1000 TDJZ-1200 TDJZ- 1500 Installation Angle 2°-2.5° 2°-2.5° 2°-2.5° 2°-2.5° 2°-2.5° Capacity(t/h) 1-1.5 1.5-2.5 2-4 4-6 6-8 Total Power(kw) 37 55 75 90 110 Moisture Of Feeding Material 35%-45% 35%-45% 35%-45% 35%-45% 35%-45% Size Of Feeding Material (mesh) 50 50 50 50 50 Dimensions 4100*1600*1150 4250*1850*1300 4700*2350*1600 4900*2550*1800 5500*2800*2000 Applicable raw materials: 1. chicken manure ,pig dung,cow manure, carbon black,pottery clay ,kaolin etc. 2. also apply to granulation of fine powder material.The finer the powder materials, the higher sphericity of granule, and the pellet quality is more better, granulation rate ≥97% . 1-1.5T/H Fertilizer Pelletizer Organic Fertilizer Granulator Machine 0 FAQ: 1. Are you trading company or manufacturer ? We are a manufacturer with a history over 40 years and have realized one-stop service for design, manufacture, installation, debugging and technical training. 2. How long is the delivery time? For standard machines or Components, it would be 5-10 days; For non-standard machines and customized machines according to clients specific requirements, it would be appointment time. 3. Do you arrange shipment for the machines? Yes, we will do that. For FOB or CIF price, we will arrange shipment for you. For EXW price, we will assist you in arranging shipment. 4. How about your product after-sales service? Normally we provide video and written technical support. If necessary, our engineers can also provide on-site service. Our product accessories can be selected according to the actual needs of the customer to choose the most appropriate way to deliver. 5. What kinds of certificate you have? ISO 9001: 2015 SGS and we can make other certificates according to customers' detailed requirements. 6. How to guarantee the quality and operation before loading? We have our own quality control department and have advance quality control stystem while from raw materials to finished products. All the machines and production lines shall be 100% checked and tested before delivery.

GSE Oil Free Compressor for Printing Equipment ZW700A - 60 / 7 - (3) AC POWER , 220V Product Descriptions: Oil less pistion compressors either have no mechanical contact inside the compression chamber or use alternate materials to protect the mechanism without lubrication. Most oil-free compressors utilize other materials like water or a Teflon coating to keep the mechanism running smoothly. These types of pumps (duplex) operate at lower RPM, reducing the noise, heat, and friction which extends the pump's life cycle and, mixed with better castings/exacting tolerances and better frictionless coatings, make oil-free a great choice in many applications. Switching from an oil-flooded to an oil-free air compressor provides operators with significantly lower maintenance requirements, including: Fewer ancillary air system components to maintain. Longer timeframes between oil changes. Elimination of expensive oil filters to clean the compressed air. Specifications: Model ZW700A-60/7-(3) Rated Voltage(V) AC 220V/50HZ Input Pover(W) ≤820W Rated pressure(kPa) 700 kPa Rated flow(LPM) 60LPM Ambient(°C) 0-40°C Insulation class B Thermal protector Auto reset 145±5°C Net weight(Kg) 11.5Kg Restart pressure(Kpa) 0kPa

With RO membrane separation technology as the core, it adopts automatic control, integrated design, modular installation, low energy consumption and small floor area. Double pipeline water supply and single pipeline circulation mode are adopted for water production to effectively control the growth of microorganisms. The control system has anti misoperation settings, audit tracking functions, and data is permanently saved and cannot be modified. The electric control system is standardized and reasonable, strong and weak current are separated, safe and stable. The touch screen, instruments, meters and valves are highly humanized and easy to operate and view. Specification of Pharmaceutical Reverse Osmosis Systems Item Type Wateroutput Minimum water intake desalination rate Operating water temperature （m3/h） （m3/h） （%） （℃） FSJ41X-0.5XB-2 0.5 2.2 98 5-35 FSJ42X-1XB-2 1 2.8 98 5-35 FSJ42R-2XB-2 2 4.1 97 5-35 FSJ43R-3XB-2 3 6.5 97 5-35 FSJ43R-4XB-2 4 7.8 97 5-35 FSJ82R-6XB-2 6 12.5 97 5-35 FSJ82R-8XB-2 8 15 97 5-35 FSJ83R-10XB-2 10 15 97 5-35 FSJ83R-15GB-2 15 31 97 5-35 FSJ84R-20GB-2 20 38 97 5-35 FSJ85R-25GB-2 25 41.25 97 5-35 FSJ86R-30G-2 30 47.5 97 5-35 FSJ86R-50G-2 50 79.5 97 5-35 FEATURES OF PHARMACEUTICAL REVERSE OSMOSIS SYSTEMS 01. Modular design, compact structure, convenient and fast on-site installation. 02. Automatic switching between water making mode and circulating mode to reduce energy consumption. 03. Double water supply mode is adopted for water production terminal. 04. Concentrated water recovery design (optional), system utilization rate can reach more than 85%. 05. PLC+HMI full-automatic control mode. 06. Fully comply with GMP, USP and cGMP requirements. If you have needs to buy ro water system in pharma industry, please leave us a message. BIOCELL is committed to providing customers with professional solutions for the production, storage and distribution of purified water system in pharmaceutical industry.

The water for injection preparation system is a key GMP system. Multi effect water distiller is the key equipment of the most widely used WFI preparation system at present. BIOCELL's multi column distillation plant adopts high temperature and high pressure operation to ensure stable production of pyrogen free water for injection. The water for injection produced by the multiple effect distillation water machine fully meets the requirements for water for injection in the current American Pharmacopoeia, European Pharmacopoeia, Japanese Pharmacopoeia and Chinese Pharmacopoeia. Specification of Multi-Effect Distiller Specification Output of Distilled Water (L/h) Steam Consumption (kg/h) Purifed Water Consumption (L/h) Cooling Water Consumption (L/h) Overall Dimension LxWxH (mm) LD (S) 100-4 >100 30 120 50 900x700x2000 LD (S) 200-4 >200 60 240 100 1000x800x2000 LD (S) 300-4 >300 90 360 150 1100x800x2200 LD (S) 500-4 >500 150 600 250 1400x900x2500 LD (S) 500-5 >500 130 600 100 1600x900x2500 LD (S) 1000-5 >1000 240 1100 200 1700x1100x3100 LD (S) 1000-6 >1000 190 1100 20 2100x1100x3100 LD (S) 1500-5 >1500 350 1670 290 2700x1100x3700 LD (S) 1500-6 >1500 290 1670 90 3200x1100x3700 LD (S) 2000-5 >2000 440 2200 210 3200x1100x4000 LD (S) 2000-6 >2000 390 2200 110 3600xI100x4000 LD (S) 3000-6 >3000 810 3300 150 4000x1200x4100 LD (S) 4000-6 >4000 880 4400 200 4300x1300x4200 LD (S) 5000-6 >5000 980 5500 250 4600x1400x4200 LD (S) 10000-6 > 10000 2250 11000 450 4900x1600x4800 How Does The Multiple Effect Distiller Works？ The working principle of the multi effect distilled water machine is that the fully heated raw water is evaporated and condensed by multi effect to remove non condensable gas and impurities, so as to obtain high-purity distilled water. To ensure the quality of distilled water, the raw water must be pretreated. Because of multiple effect evaporation, the heat is fully utilized. Each effect evaporator adopts the principle of vertical tube type falling liquid film evaporation, plus a special structure of feed water distributor, so that the feed water can form a film and flow evenly in the tube. The multi effect distilled water machine eliminates the dry wall phenomenon caused by uneven distribution of local feed water, greatly improving the evaporation efficiency. The multi effect distilled water machine has the characteristics of small size, light weight, large water yield, and good water quality stability. FEATURES OF MULTI EFFECT DISTILLER 01. Unique three-stage separation mode to fully ensure the quality of produced water. 02. New expansion process, effectively avoiding cross contamination. 03. PLC+HMI full-automatic control mode. 04. Fully comply with GMP, USP and cGMP requirements. Now the price of purified water system pharmaceutical is reasonable, if you have needs, please leave us a message.

EDI is a pure water manufacturing technology that combines ion exchange technology, ion exchange membrane technology and ion electromigration technology. It skillfully combines electrodialysis and ion exchange technology, uses high voltage of electrodes at both ends to move charged ions in water, and cooperates with ion exchange resin and selective resin membrane to accelerate the removal of ions, so as to achieve the purpose of water purification. During EDI desalination, ions are removed by ion exchange membrane under the action of electric field. At the same time, water molecules generate hydrogen ions and hydroxide ions under the action of electric field, which continuously regenerate the ion exchange resin to keep the ion exchange resin in the best state. Technical Data of Electrodeionization Unit Item Reference value Nominal Recovery: 90–95% EDI Water Quality: 15–18 MΩ.CM（25℃） FEED CONDUCTIVITY (INCLUDING CO2): < 10 µs/cm（25℃） Operating Temperature: 50–100° F Maximum Inlet Pressure: 100 psig Minimum Inlet Pressure: 60 psig Expected Pressure Drop: 30–40 psig Electrical Requirement: 380 VAC, 3-phase, 50 Hz. OPERATING PRINCIPLES OF ELECTRODEIONIZATION EDI Process EDI desalination process is to exchange ions in water with hydroxide ions or hydrogen ions in ion exchange resin, and then migrate these ions into concentrated water； The above exchange reaction takes place in the freshwater chamber of the module. In the freshwater chamber, the hydroxide ion in the anion exchange resin exchanges with the anion in the water, and the hydrogen ion in the cation exchange resin exchanges with the cation in the water； The exchanged ions migrate along the surface of the resin ball under the effect of the DC electric field and enter the concentrated water chamber through the ion exchange membrane； The negatively charged anions are attracted by the anode, and these ions enter the adjacent concentrated water chamber through the anion membrane, while the adjacent cation membrane membrane does not allow them to pass through. These ions are blocked in the concentrated water, while the positively charged cations are attracted by the anion anion, and these ions enter the adjacent concentrated water chamber through the cation membrane, while the adjacent anion membrane does not allow them to pass through. These ions are blocked in the concentrated water. In concentrated water, ions from both directions maintain electric neutrality. At the same time, the amount of current is proportional to the amount of ion migration. The amount of current consists of two parts, one part from the migration of removed ions, and the other part from the migration of water itself ionized into H+and OH - ions； When the water flow passes through the fresh water chamber and the concentrated water chamber, the ions gradually enter the adjacent concentrated water chamber from the fresh water chamber and are carried out of the EDI module by the concentrated water； Under the action of higher voltage gradient, water will generate a large amount of H+and OH- through electrolysis. These generated H+and OH- will continuously regenerate the ion exchange resin. Therefore, the ion exchange resin in EDI module does not need chemical regeneration； The above is the desalination process of EDI. FEATURES OF ELECTRODEIONIZATION 1. Regeneration of acid and alkali is not needed. 2. Zero discharge; no discharge of wastewater. 3. The running is continuous and the water quality is stable. 4. Modularization design is adopted so as to facilitate extension. 5. Less space is occupied. If you want to know more kinds of electrodeionization system, please visit our website. The water system in pharma is based on the preparation equipment, storage and export of purified water and water for injection and other functional units, optimized and combined by various functional modules, so as to ensure the high performance and quality of the whole system, and make the product water fully meet or exceed the water quality standards of purified water and water for injection.

Clean steam generator using electric energy as heating source is referred to as electric heating clean steam generator. The steam generated after the purified water is heated and evaporated by the electric heating clean steam generator, through the centrifugal separation structure that can effectively remove the water droplets and pyrogens entrained in the steam, the condensed water of the clean steam produced meets the quality indicators of USP, EP, JP and ChP on "water for injection". This machine is suitable for production places without industrial steam, and is an ideal sterilization equipment for hospitals, pharmaceutical, catering, electronics, chemical and other industries. Specification of Electric Clean Steam Generator Specification Clean Steam Output(Kg/h) Purified Water Consumption(L/h) Electricity Consumption(KW） Overall Dimension L×W×H(mm) CSGE50 >50 65 48 1000x700x2000 CSGE100 >100 125 96 1200×900×2500 CSGE200 >200 250 192 1700×1000×2700 CSGE300 >300 375 288 1900×1100×2800 How Does Electric Clean Steam Generator Works? Industrial steam is the most cost-effective heating source of clean steam generator. In places without industrial steam, electric heating can be selected if conditions permit. Electric energy is converted into heat energy as an alternative energy for industrial steam. FEATURES OF ELECTRIC CLEAN STEAM GENERATOR 01. Precise control of clean steam output pressure and temperature, fluctuation within+5%. 02. Clean steam pressure output range: 2-4Bar. 03. Electric heating is adopted to convert electric energy into heat energy. 04. PLC+HMI full-automatic control mode. 05. Rising film/falling film, two working modes are optional. 06. Comply with relevant requirements of WS310 supply room management specification If you want to know more sorts of pharmaceutical purified water systems, please leave us a message.

Electrodeionization Water Treatment EDI module is usually placed behind the reverse osmosis system, which not only overcomes the lack of deep desalination of reverse osmosis effluent, but also further removes trace carbon dioxide, residual salt, silicon dioxide, boron and total organic carbon plasma in RO water, greatly improving the quality of purified water. It is widely used in biotechnology, pharmacy and other industries that must generally comply with and comply with USP, EP, JP and ChP regulations. ※ Post EDI Ultrafiltration ※ A post EDI UF System with 6000 Daltons Molecular Weight Cutoff membranes serves to produce highly purified water having a compliance with low endotoxin values. ※ A post EDI UF can have a TOC reduction UV with 194 nm wavelength or 254 nm wavelength for bacterial control as an option. Specification of EDI Water Treatment System Water inflow requirements TEA（with CO2） <25mg/L as CaCO3 Hardness <1mg/L as CaCO3 TOC <0.5mg/L Temperature 5-43℃ PH 5-9 Silicon <0.5mg/L Free Chlorine <0.05mg/L Water inlet pressure 30-100psi Fe,Mn,H2S <0.01mg/L Rate of recovery 90-95% How Does EDI Water Treatment Works? Process Principles Enhanced transfer regime (high salinity) – Remove strong ions from water Electroregeneration regime (low salinity) – Remove ionizable species (weak acids or weak bases) from water FEATURES OF EDI WATER TREATMENT 01. The most cost-effective way to upgrade RO purified water system (PW) to high purified water system (HPW). 02. Effective minimum flow interlocking and current overload protection device. 03. Excellent water quality performance under different working conditions. 04. Front and rear UV devices (optional), thermal disinfection module (optional). 05. PLC+HMI full-automatic control mode. 06. Fully comply with GMP, USP and cGMP requirements. If you want to know more types of pharmaceutical water purification system, please visit our website.

The prototype of the clean steam generator is a pure steam generator in the pharmaceutical industry. In structural design, it simplifies and weakens the complex steam water separation structure. Compact structure, small floor area, no water storage, high quality of clean steam. It is widely used in food, beverage, electronics, dairy, medicine and other industries. Specification of Clean Steam Generation Equipment Specification Steam Pressure(Mpa) Steam Output(Kg/h) Steam Consumption(Kg/h) Purified Water Consumption(L/h) Clean Steam Pressure(Mpa) Dimension L×W×H(mm) CSG100 0.4 100 130 125 0.3 700×900×2500 CSG200 0.4 200 260 250 0.3 700×1000×2700 CSG300 0.4 300 390 375 0.3 800×1100×2800 CSG400 0.4 400 520 500 0.3 800×1200×3000 CSG500 0.4 500 650 625 0.3 800×1300×3100 CSG600 0.4 600 780 750 0.3 900×1300×3100 CSG700 0.4 700 910 875 0.3 900×1300×3100 CSG800 0.4 800 1040 1000 0.3 1000×1300×3200 CSG900 0.4 900 1170 1125 0.3 1000×1300×3200 CSG1000 0.4 1000 1300 1250 0.3 1200×1300×3200 CSG1500 0.4 1500 1950 1875 0.3 1400×1300×3200 CSG2000 0.4 2000 2600 2500 0.3 1400×1300×3200 FEATURES OF CLEAN STEAM GENERATORS 01. Precise control of clean steam output pressure and temperature, fluctuation within+5%. 02. Clean steam pressure output range: 2-4Bar. 03. PLC+HMI full-automatic control mode. 04. Rising film/falling film, two working modes are optional. 05. Comply with relevant requirements of WS310 supply room management specification. As professional clean steam generator manufacturers, we will do our best to meet all the needs of customers. If you want to know more applications of water system in pharma industry, please visit our website.

Pharmaceutical Water Systems Water is the most widely used process raw material in the pharmaceutical industry, which is used as the composition, solvent and diluent of drugs. Pharmaceutical water is mainly divided into two categories: Purified water: it is pharmaceutical water prepared from raw water by distillation, ion exchange, reverse osmosis or other appropriate methods, and does not contain any additives. Water for injection: It is the water obtained by taking purified water as raw water, distilling in a specially designed distiller, condensing and cooling. Sterile Water for Injection is the water prepared according to the injection production process. The purified water system in pharmaceutical is composed of water treatment equipment and transportation system. Through design, installation and confirmation, judge and evaluate whether the equipment meets the predetermined production capacity, water quality standard, capacity, flow rate, pressure, temperature, disinfection method, etc. The operation and maintenance of water system in pharma company shall be monitored and managed according to the requirements of verification and documents. Ensure that the operating parameters of the system are within the range of operating parameters confirmed by the equipment. TYPES OF BIOCELL PHARMACEUTICAL WATER SYSTEMS Pharmaceutical Water Purification System Water For Injection System (WFI) Pure Steam Generation System(PS/CS) Purified Water System(PW) PW/WFI Storage & Distribution Systems Pharma Water System Control & SCADA Sanitary Heat Exchanger Pharmaceutical Water Purification System The pharmaceutical water system is composed of water treatment equipment and transportation system. Through design, installation and confirmation, judge and evaluate whether the equipment meets the predetermined production capacity, water quality standard, capacity, flow rate, pressure, temperature, disinfection method, etc. Ultrapure Water System Ultrapure water is produced by distillation, deionization, reverse osmosis technology or other appropriate supercritical fine technology. Now ultrapure water has been widely used in biology, medicine, industrial manufacturing and other fields. Ultrapure water system refers to the production system in which raw water and ultrapure water are completely produced. The conductivity of common tap water is less than 10-20 after being treated by the primary reverse osmosis system μ S/cm, permeate conductivity1-5 after secondary reverse osmosis system μ S/cm is even lower. The reverse osmosis system can be supplemented with ion exchange equipment or EDI equipment to prepare ultrapure water, making the resistivity as high as 18.25 megohm. cm. GOOD DESIGN PRINCIPLES OF BIOCELL PHARMACEUTICAL WATER SYSTEM 01 Customization Comprehensively understand the customer's actual needs for water preparation process, system configuration, etc., and customize the water system. 02 Cooperation BIOCELL is a member of China Pharmaceutical Equipment Industry Association, and has long maintained technical exchanges and cooperation with many well-known domestic pharmaceutical enterprises. 03 Experienced BIOCELL has a group of industry senior experts, professional designers and experienced project installers who have practiced in many application fields for many years, with an average working time of more than 10 years.

PRODUCT DESCRIPTION Direct Drive Torque Motor Low Cogging And Zero Cogging Top Quality With High Standards Inroncore and slotless torque motors with same size Ultra-thin design Highest torque density Low thermal resistance Encapsulated design with shielded cable Low stator and rotor mass with large inner diameter Wide range of bus voltage from 45V up to 600Vdc Performance Parameter Remarks Symbol Unit TMXSL160-17 TMXSL160-25 TMXSL160-34 TMXSL160-60 TMXSL160-92 Winding Type N Y Z N Y Z N Z N Y Motor type 3 phases synchronous slotless 230Vac rms (320Vdc) 380Vac rms (600Vdc) Peak torque Magnet@25°C Tp Nm 4.1 4.1 4.1 9.7 9.7 9.7 15.9 15 36.4 60.8 Continuous torque Coil@120°C Tc Nm 1.03 1.03 1.03 2.43 2.43 2.43 3.98 3.75 9.1 15.2 Maximum Speed @Tc@48V nmax mrpm 8819 15679 26458 4410 7898 13656 2453 9407 1725 1036 Motor Torque Constant Kt Nm/Arms 0.24 0.14 0.08 0.48 0.27 0.16 0.86 0.23 2.3 3.83 Motor Constant Coils@25°C Km N2/W 0.006 0.006 0.007 0.018 0.018 0.018 0.036 0.031 0.114 0.625 Electrical Parameter Remarks Symbol Unit TMXSL160-17 TMXSL160-25 TMXSL160-34 TMXSL160-60 TMXSL160-92 Peak Current Magnet@25°C lp Arms 17.2 30.5 51.5 20.3 36.3 62.7 18.4 66.7 15.8 15.9 Max.Continuous Current Coil@110°C lc Arms 4.3 7.6 12.9 5.1 9.1 15.7 4.6 16.7 4 4 Back EMF Phase to Phase peak 25℃+/-10% Kep V/krpm 21 12 7 41 23 13 74 19 198 330 Back EMF Phase to Phase RMS C25℃+/-10% Ke V/krpm 15 8 5 29 16 9 53 14 140 233 Resistance Per Phase Coil@25°C Rph Ω 3.15 0.95 0.31 4.37 1.3 0.44 6.87 0.55 15.49 5.86 Induction Per Phase I<0.63lp Lph Mh 3.78 1.24 0.4 6.12 1.95 0.66 10.99 0.88 26.33 16.47 Electrical Time Constant Coil@25°C Te Ms 1.2 1.3 1.3 1.4 1.5 1.5 1.6 1.6 1.7 2.9 Max. Continuous Power Loss All coils Pc W 226.3 215.7 200.4 436.8 416.2 422.7 568.4 595.8 945.4 348.9 Poles Nmag nr 36 36 36 36 36 36 36 36 36 36 Product dimension drawing: RoHs Low Cogging Zero Cogging With High Standards 12V DC Motor High Torque Low Rpm 0 Application area RoHs Low Cogging Zero Cogging With High Standards 12V DC Motor High Torque Low Rpm 1 RoHs Low Cogging Zero Cogging With High Standards 12V DC Motor High Torque Low Rpm 2