Industrial Machinery & Equipment

Two(three)-phase temperature, ejected speed, backing pressure and screw speed is suitable for various plastic to confectioned. Fixed bottom mold and loose top mold type is suitable for plastic injection molding of inserts and it is also equipped with an ejector for finished products. Low-pressure closed die assembly can protect the safety of die. Standard Plastic Injection Machine Applications Standard plastic injection machines are ideal for producing: Automotive Components: Housings, clips, interior panels. Consumer Products: Household items, packaging components, toys. Electronics Parts: Casings, connectors, and functional components. Industrial Applications: Gears, valves, and other standard plastic parts.

function:Wire cutting, stripping both ends, pressing one end, inserting one end into the shell, and half peeling one end wire size:AWG # 20- # 28 (wire outer diameter less than or equal to 2.5mm) Wire color:Optional 2～12 Wire cutting length:10 mm—700 mm (set in 0.1 mm units) Cutting length precision:Tolerance 0.1 mm + stripped long:1.0 mm — 8 m m Stripping length accuracy:Tolerance ±0.1 mm Crimping Machine:2T Pressing stroke:30mm Universal Press:Universal OTP press (split line applicator) Detection cover:Pressure drop, wire presence detection, crimping error detection, terminal presence detection, terminal insertion detection CCD detection (optional), pressure sensor device (optional) Control method:Single chip microcomputer control Internal control voltage:DC24V power supply:Single phase ~AC200V/220V 50HZ 10A Compressed air:0.5MPa, about 170N/min Operating temperature range:15℃ - 30℃ Operating humidity range:30%-80%RH, no condensation Mechanical weight:About 700kg

Minimum Order: 1 bags

Equipment technical parameters model:HL-B30 control system:PLC human machine interface Cutting method:Motor cut-off Journey:30mm source: 220V 50-60HZ power:300W Cutting diameter: ø 5- ø 30mm （ φ 30- φ 45 Length error: Cutting length ± 1% Shear speed: 10-60 pieces/minute (depending on Appearance: 580X470X500mm (70KG)

Minimum Order: 1 bags

Characteristic Description This machine is designed for cutting and stripping wire harnesses in industries such as new energy vehicles, power systems, and cables. It uses a 12 wheel track type wire feeding system to enhance the friction of the conveyed wire and ensure the accuracy of the cutting length and stripping head without any pressure marks on the wire surface. It also uses a bidirectional screw clamping wheel to accurately match the wire size with the center of the cutting edge, achieving a smooth stripping opening without scratching the core wire. The machine is fully computerized and debugged, and the wire length, cutting depth, stripping length, and wire clamping are all digitally operated through a full touch screen, which is simple and easy to understand.

Minimum Order: 1 bags

Product Features:Single core wire automatic peeling and crimping terminal Inner core stripping :0-10MM External stripping :Above 12MM Crimping force:Standard 2T30 stroke Adapt to wires:Inner core wire 22-30AWG Pneumatic components:Yadeke Pneumatic Straight slide rail:Shangyin guide rail/Yadeke guide rail Crimping motor:0.75KW three-phase asynchronous motor, variable frequency control (optional 1.5KW/2.2KW) drive control:Jiayuan Intelligence Motor frequency conversion:Jiayuan Intelligence Adapted applicator:Conventional multi-core mold, ultra short multi-core mold

Minimum Order: 1 bags

Model:HL-2040D Wire size:AWG30-AWG4 (0.04-20sqmm) Function:Half stripping, full stripping, double stripping. sheathed wire processing mode, etc.. Productivity:1800-2000pcs/h Stripping Length:1mm-40mm Adjustment accuracy:0.05mm Power supply:AC220V 50/60HZ Dimensions:500mm*62mm*300mm Weight:2 , 0KG

Minimum Order: 1 bags

Advantages of label folding machine 1. Automatic blanking 2. Speed super fast . feeding do not pay attention to technique, just put  labels on the machine, then it can be constantly. 3. More advanced system, automatic identification tag performance is more stable. Applicable industries: electronics, wire, electrical appliances, electromechanical, used for headphone cable, USB cable, power cord, air pipe, etc. Applicable label:  sticker, dry film; Electronic supervisory codes, bar codes, etc.; Application examples:  headphone cord labeling, power cord labeling, optical fiber cord labeling, cable labeling, air pipe labeling, warning label labeling machine, etc

Minimum Order: 1 bags

Product Details: Model FEK-06M Voltage 220V/110V/50HZ 220V/110V/50HZ 180VA Output 15KN Features: 1.The machine is driven by dual-action normal cylinder, which has advantages of high efficiency and quality in crimping force and speed. 2.The machine is fit for many kinds of terminals. 3.The crimping machine and the gas source connection. 4.Will match the supply air terminal and wire-bound good. 5.According to the required length of crimp terminals to adjust the depth of the interface pressure. 6. It is good for terminal crimping in large or medium quantity. 7. If there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.

Minimum Order: 1 bags

Basic parameters Processing range: 2-10P crystal head (tail clip can be customized) Crimping speed: 3 times/second Compression stroke: 26mm Size (length * width * height): 359x143 x262 mm Weight: approximately 10KG Voltage and power: AC220V/60Hz/140W Operation mode: touch start Crimping accuracy: ± 0.10 characteristic Adopting variable frequency start stop technology, without brake device, precise positioning parking, high-speed operation without fear of brake wear. 2. The needle pressing knife and adhesive pressing knife can be adjusted independently, and changing the model can adjust the pressure quickly and conveniently. The trigger start switch adopts a low-voltage signal to start, with no risk of leakage or contact burning, safe and efficient. Adjustable motor controller that can adjust the running speed of A according to usage requirements. The digital crimping counting device can clearly record 5 times of crimping production advantage Variable frequency start stop technology with no brake design. High speed crimping without brake wear completely solves the equipment connection failure caused by brake wear.

Minimum Order: 1 bags

An effective double-cushion hydraulic system with a floating adapter offers high productivity and superior drilling steel economy. A robust stepless variable and reversible rotary motor ensure high torque and excellent speed control. Productivity is further improved and downtime reduced thanks to lubricated and pressurized contact surfaces and side bolts, along with separate lubrication for the front headstock and driver.

5 Ton Anti-Explosion Battery Locomotive With 7.5kw Mining Traction motors Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive weight (t) : 5 t Track gauge (mm) : 500.600.762.900 Traction (KN) : 7.06 Max. Traction (KN) : 12.26 Speed(km/h) : 7 Battery Voltage (V) : 90 or 96 Battery Capacity (Ah) : 385 Power (KW) : 7.5KWx2 Dimensions Length(mm) : 2860 Width(mm) : 920,1082 or 1220 Height(mm) : 1550 Wheelbase (mm) : 850 Wheel diameter (mm) : 520 Min Curve radius (m) : 6 Controller : Resistencia o IGBT Braking method : Mechanical or hydraulic brake

Minimum Order: 1 bags

Product Details: The unique and newly designed "full contact" high-speed grinding wheel can automatically adjust the curvature of the wire body and completely remove any hard insulating paint, enamel paint, ML, Isonel, etc. on the wire surface without damaging the copper (aluminum) wire itself. . Paint stripping is fast and safe without serious pollution or hazards. It is suitable for round wires and square wires, and can process multiple strands of enameled wire at the same time. Easy to operate and excellent results. (optional vacuum cleaner) Machine model DNB-1 Applicable wire diameter 0.14-3.18mm Machine size 485x305x265mm Operating voltage 220v/50Hz Motor power 550w rotation speed 3330r/min Machine weight 25kg Optional accessories Nylon fiber wheel or steel wire wheel Belt size 750x30x2mm Email:demi@hilong-e.com Stripping length 3mm- unlimited

Minimum Order: 1 bags

Feature: 1. advanced liquid crystal display(LCD)+ backlit display mode, modern mobile phones mode of operation to eliminate digital tube make eye fatigue and set operation cumbersome shortcomings. 2.motor directly out of the shaft and no transmission torque loss. 3.zero maintenance, no carbonate ,electromagnetic brake, belt and so on mechanical wear and tear, we adopted the advanced electronic control braking mode. 4.perfect industrial protection circuit design, ensure trouble-free working for more than 20000 h. 5.for has set up a data have perfect protection function, and the data can be stored permanently. 6.different section can be set up respectively different winding direction, also has the positive and reverse counting function.

Minimum Order: 1 bags

Features Full automatic terminal crimping ma, using high-tech frequency conversion technology, electronic precision positioning, when pressure welding working noise is smaller than the traditional terminal, and save electricity, the variable is more convenient and quick, avoid the traditional terminal clutch,

Minimum Order: 1 bags