Inorganic Chemicals

The d dimer reagent produced by Hipro are used to determine the content of D- Dimer (D-Dimer) in human blood, and a specific reagent for the specific protein analyzer applies only to the clinical in vitro assisted diagnosis. D-Dimer is one of fibrin degradation product (FDP) decomposed by cross-linked fibrin and plasmin, due to the role of coagulation factor Ⅹ Ⅲ, in the blood coagulation - fibrinolysis system. D- Dimer in blood increased has proved that the body has thrombosis. The high values also shown in obstetric disorders, vascular disease, disseminated intravascular coagulation syndrome (DIC: Disseminated Intravascular Coagulation Syndrome) etc. Testing Principle of D-Dimer Test The D-Dimer units conjugated anti-human D-Dimer antibodies in the latex surface. D-Dimer in the sample and the antibody become immune complexes by Latex condensation reaction. The immune complexes will produce the phenomenon of light scattering, which is proportional to the intensity of scattered light and samples of D-Dimer levels. Using a specific protein analyzer to measure the intensity of scattered light, the concentration of D-Dimer is determined by comparing the turbidity of samples to the standard concentration. Basic Parameters of D-Dimer Test Specimen: plasma. Test time: 180 seconds. Packing: 25 Tests/ Kit. Box Size: 17*10*8cm. Storage: 2-8℃. Shelf life: 1 year. Hipro Biotechnology Corp is a professional IVD manufacturer, we provide immunoassay machine, immunology analyzer, in vitro diagnostic solutions and etc. Want to know more?contact us.

Minimum Order: 1000

N-benzylisopro'pylamine can be used as an intermediate in the synthesis of compounds and as a precursor in the production of certain drugs. Due to its similarity to metha'mphetamine in appearance and physical properties, it has been taken into consideration by DEA in recent years. N-benzyl isopro'pylamine and magnesium form amine adducts in tol'uene at room temperature. Bis (cyclopentadienyl) magnesium was prepared and characterized with N- benzyl isopro'pylamine as ligand. It is also used in the synthesis of N- benzyl isopro'pylamine. N- benzyl isopro'pylamine is a common organic base and an important raw material for organic synthesis. It is a common intermediate or drug precursor in pharmaceutical industry N-benzyl isopro'pylamine can be used as an intermediate in the synthesis of pharmaceutical compounds and as a precursor in the manufacture of certain drugs. DEA has recently been considered because of its similarity to metha'mphetamine in appearance and physical properties.

Minimum Order: 1 bags

BPC 157 has a strong anti-inflammatory activity in both acute and chronic inflammation models. In fact, preliminary results in clinical trials suggest that BPC 157 may become an important therapeutic tool for the treatment of inflammatory bowel disease. BPC 157 was shown to accelerate wound healing and to have a marked angiogenic effect. In addition, it significantly facilitates the healing of bone fracture in rats. BPC 157 exhibits an osteogenic effect significantly improving the healing of segmental bone defect. BPC 157 accelerates the healing of transected rat Achilles tendon and transected rat quadriceps muscle. BPC 157 has a strong anti- inflammatory activity in both acute and chronic inflammation models.In fact, preliminary results in clinical trials suggest that BPC 157 may become an important therapeutic tool for the treatment of inflammatory bowel disease. BPC 157 was shown to accelerate wound healing and to have a markedangiogenic effect. In addition, it significantly facilitates the healing of bone fracture in rats. This peptide also exhibits an osteogenic effect significantly improving the healing of segmental bone defect. BPC 157 accelerates the healing of transected rat Achilles tendon and transected rat quadriceps muscle.

Minimum Order: 1 bags

Dear Sir or Madam, We are Chinese sealing materials (graphite and PTFE/TEFLON etc.) manufacturer and have passed ISO9000 quality certificate. Below are Our products. 1.) Flexible graphite sealing products (foil,rolls, sheets, tapes, rings) 2.) Reinforced graphite sheet with carbon steel/SS304/SS316 3.) Gasket series 4.) Braided packing 5.) Ultra-thin graphite foil (Min. thickness 0.03mm) 6.) Milled clean graphite foil 7.) Flake graphite 8.) Graphite powder 9.) Expandable graphite 10.) Graphite & carbon felt I hope that this letter will lead to profitable business for both our companies in the near future. Your earlier reply will be highly appreciated. Bear Regards, Calvin Wang/ Berry Industry Co., Ltd E-mail:berryinfo@vip.163.com www.berrygraphite.com Tel: +86-532-85921446 Fax: +86-532-85875736

As one of petg bottle suppliers, petg bottle manufacturer, petg bottle manufacturers, we have thick petg plastic bottle and thin petg water bottle, which all have different sizes and shapes. Our company, being one of petg bottle suppliers, can offer customized color, size and type products. As one of the skincare packaging companies, our main product is petg plastic bottle, which has been welcomed in the market. If you want to buy or know more about disinfection and sterilization products, please contact us. Types of PETG Bottle PETG Plastic Bottle We have PETG bottles of thick wall and normal wall with different size and capacity for you to choose.

Minimum Order: 5000

SiSiB develops and manufactures a full line of high-quality silicone oil surfactant for formulating polyurethane rigid foams, flexible foams, high resilience foams, shoe sole foams and one component foam. SiSiB develops and manufactures a full line of high-quality silicone surfactants for polyurethane foam. Our silicone oil surfactants products are used for a variety of polyurethane applications: rigid foams, flexible foams, high resilience foams, shoe sole foams, one component foam, etc. SiSiB, a reliable silane manufacturer, is responsive and flexible in formulating and manufacturing to satisfy customers’ unique requirements. Our extensive network of reactors allows us to support our customers from project inception, to scale-up, through commercial success. SiSiB Silicone Surfactant for PU foams are grafted copolymers which consist of a polydimethylsiloxane backbone and polyethylene oxide-co-propylene oxide pendant groups. It is used as surfactants to stabilize the foam cells in the flexible polyurethane foaming process. It increases the compatibility of raw materials, decrease surface tension in polyurethane foam systems, improve emulsification and nucleation, prevent coalescence and stabilize cell membranes. PU Foam Silicone Stabilizer Recommendations ADDSiL™ 11030 ADDSiL™ 11030 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is designed for Pentane and HCFC- 141b blown polyurethane foams, it provides good nucleation and excellent flow ability. ADDSiL™ 11050 ADDSiL™ 11050 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is a general-purpose foam stabilizer used for the production of polyurethane rigid foam plastic, and it is used in both hydrocarbons (cyclopentane), HCFC 141b and high water content foaming system. ADDSiL™ 11060 ADDSiL™ 11060 silicone surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is mainly used for manufacturing polyester polyurethane and polyether polyurethane rigid foam plastic, and is a foam stabilizer for PIR foaming process. ADDSiL™ 11080 ADDSiL™ 11080 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is an excellent candidate to consider for both continuous and discontinuous applications. It is designed for HFC-365/227 and the mixture blown polyurethane foams; it provides low thermal conductivities. ADDSiL™ 11090 ADDSiL™ 11090 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for HFC-245fa and the mixture blown polyurethane foams; it provides low thermal conductivities. ADDSiL™ 11200 ADDSiL™ 11200 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for iso-cyclopentane blown polyurethane foams; it provides good nucleation and excellent flow ability. ADDSiL™ 11210 ADDSiL™ 11210 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b blown polyurethane foams, it provides ideal balance of processing and performance properties. ADDSiL™ 11220 ADDSiL™ 11220 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for HCFC-141b and cyclopentane blown polyurethane foams; it provides strong nucleation and low thermal conductivity. ADDSiL™ 11280 ADDSiL™ 11280 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer with high activity. It is designed for water and pentane blown polyurethane foams; it provides excellent emulsion stability and voids reduction. ADDSiL™ 11300 ADDSiL™ 11300 silicone surfactant is a non-hydrolytic polyether polydimethylsiloxane copolymer. It is designed for pentane blown polyurethane foams. ADDSiL™ 11300 provides low thermal conductivities and it is an excellent candidate for insulating appliance and PIR/PUR formulations. ADDSiL™ 11320 ADDSiL™ 11320 surfactant is a non-hydrolysable silicone glycol copolymer for manufacturing of rigid polyurethane foams. It is designed for HCFC-141b and Pentane blown polyurethane foams. ADDSiL™ 11600 ADDSiL™ 11600 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for polyurethane foaming system with HFCs/HFOs blowing agent. It is also suitable for some mixture blowing agents like LBA/CP. ADDSiL™ 11630 ADDSiL™ 11630 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for rigid polyurethane foaming system with blowing agents like 245 /Cyclopentane /LBA/Ecomate, as well as some mixture blown agents like LBA/CP. ADDSiL™ 11720 ADDSiL™ 11720 surfactant is a non-hydrolytic, isocyanate-compatible foam stabilizer with high activity. It is a copolymer of polysiloxane and polyether which mainly used for the production of polyurethane rigid foam plastic. ADDSiL™ 11800 ADDSiL™ 11800 silicone surfactant is an organosilicone copolymer designed for use in the manufacture of rigid polyurethane foams. It can provide very efficient emulsification in insulation foams, such as in refrigerators and cold storage applications. ADDSiL™ 11820 ADDSiL™ 11820 surfactant is a non-hydrolysable polyether polydimethylsiloxane copolymer. It is designed for polyurethane foaming system with pentane blowing agent. ADDSiL™ 12250 ADDSiL™ 12250 surfactant is a silicone stabilizer. It is designed for cold-cure flexible molded MDI and MDI/TDI polyurethane foams. ADDSiL™ 12360 ADDSiL™ 12360 surfactant is a silicone stabilizer. It is designed for cold-cure flexible molded TDI polyurethane foams. ADDSiL™ 12550 ADDSiL™ 12550 is a silicone surfactants. It is designed for high resilience slabstock foam. It is a versatile and reliable for all formulations predominantly based on TDI 70+. ADDSiL™ 12560 ADDSiL™ 12560 is a moderately active silicone surfactant for regulation and stabilization of the cell structure in high resilience molded polyurethane foams based on based on TDI 50 ~ TDI 70. ADDSiL™ 12850 ADDSiL™ 12850 surfactant is a silicone foam stabilizer. It is designed for cold-cure flexible molded MDI and MDI/TDI polyurethane foams. ADDSiL™ 13288 ADDSiL™ 13288 is a silicone surfactant provide broad latitude in all grades of conventional flexible foams, including those of very low density where high loading with auxiliary blowing agents act to...

Minimum Order: 1 bags

POWSIL-59223 is an innovative textile softener, especially designed to deliver a hydrophilic, voluminous and silky natural hand feel to most types of fabrics at lower use level than traditional silicone softeners. It provides fast & consistent hydrophilicity and high ability of fabric to rapidly absorb & retain liquid water of water absorption to most types of textile fiber or silicone fabric, especially for terry towel, which cannot be obtained with traditional silicone or fatty acid based softeners. It is very stable in ordinary textile finish process without causing oil-spots on fabric. Technical Data Property Value Physical Form Liquid state Appearance Clear, pale & yellowish Solid Contents (wt%) 55.0-58.0 Viscosity (25°C, cps) <1000 pH (25°C) 4.0-6.0 Flash Point(°C, Open) >100 Diluents Water Gravity(25°C) 0.993 Ionic Slightly cationic Application POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water into any grades wihout additional emulsifying process. Micro-emulsion for 30.0% of POWSIL-59223 Formulation: POWSIL-59223: 30% Water: 70% Procedures: Charge water into a tank and start to stir; Add POWSIL-59223 gradually under stirring; Continue to stir for 5-10 min after all addition; Clear micro-emulsion will be obtained at end of this procedure. POWSIL-59223 can be used as received or pre-diluted with water before applying. Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing. Pad-dry-cure process Dosage: 10~20g/L for light fabric or 25-50g/L for heavy fabric pH: 5.0 ~ 7.0 Temp.: Ambient temperature Dry/Cure: 120-170 ºC for1-3min Exhaustion process Dosage:   1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric like terry towel Liquor ratio: 1/10-1/20 pH: 5.0 -7.0 Temp.: Ambient temperature Time: 10-30 min Spinning & Drying: 100 ~ 170 ºC for 1-3 min Garment washing process Dosage: 1.0 -3.0% on the weight of garment Temp.: Ambient temperature Time: 30 ~ 60 min Spinning & Drying: 100-130 ºC for 3-5 min Stripping: POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation is as follows: NaOH:   5g/L LABS (30%): 2-5% Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water. Packing and Storage To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed. As a silicone producer, we will offer high quality products to you.

Minimum Order: 1 bags

POWSIL-50502 is a high concentrated hydrophilic softener for textile. It is an epoxy-modified organic silane China emulsion, giving fabrics sio2 hydrophilic, soft and anti-static properties. Technical Data Property Value Physical Form Liquid state Appearance Clear, pale & yellowish Solid Contents (wt%) Min. 95.0 Viscosity (25°C, cps) <2300 pH (25°C) 6.0-8.0 Flash Point(°C, Open) >100 Gravity(25°C) 0.89-1.089 Ionic Nonionic Application POWSIL-50502 hydrophilic silicone softener for textiles can be used for cotton, flax and polyester fabrics. 1. Pad-dry-cure process Dosage: 3~8g/L (the original emulsion) Residual water proportion: 65 ~ 85 Dry/Cure: 160 ºC for1-2min 2. Exhaustion process Dosage: 0.3-0.8% (o.w.f) Liquor ratio: 1/10-1/20 Temp.: Ambient temperature Time: 15-30 min Spinning & Drying: 160 ºC for 1-2 min 3. Garment washing process Dosage: 0.3-0.8% (o.w.f) Liquor ratio: 1/10-1/20 Temp.: Ambient temperature Time: 15 ~ 30 min Spinning & Drying: 160 ºC for 1-2 min Packing and Storage POWSIL-50502 for silicone coated fabric tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed. To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. Sisib silane, established in 1989, is one of the leading manufacturers in silicone industry, focusing on the development and manufacture of silanes and silicones.

Minimum Order: 1 bags

As one of the professional pharma companies manufacturing api companies, Aolisenchem has continuously upgraded this industry, increased investment in environmental protection, and carried out work around new product development, process improvement and new technology research to improve safety, environmental protection and quality. Catalog No.：ALS10001 Aolisenchem provides chemical intermediates 2-Fluorophenylacetic Acid CAS#451- 82-1, which can be used as pharmaceutical intermediate, chiral derivatizing agent and geothermal tracers. Specifications of 2-Fluorophenyl acetic acid CAS#451-82-1 Appearance: white to grey-white crystal solid Purity: 98% Density: 1.272 g/cm3 Melting point: 259.6ºC at 760 mmHg Boiling point: 60-62 °C(lit.) Water (KF): 0.5% Properties Of 2-Fluorophenylacetic Acid CAS#451-82-1 Other Names 2-(2-Fluorophenyl) acetic acid; 2-Fluorobenzeneacetic acid, Acetic acid CAS Number 451-82-1 Molecular Formula C8H7FO2 Molecular Weight 154.14 MDL Number MFCD00004315 Safety Information Of 2-Fluorophenylacetic Acid CAS#451-82-1 Signal word: warning Personal protective: eye shield, dust mask type N95 (US), Gloves Emergency treatment: if inhale, please move to fresh air; if contact with skin, remove the contaminated clothing and wash the skin thoroughly with soap and water. If you feel uncomfortable, seek medical attention immediately. WGK Germany: WGK 3

Minimum Order: 1 bags

Mondern Replica Flos Captain Flint Floor Lamp Dimensions: W36×H155cm Materials: Metal and Marble Colors: White, Black, Gold Estimate lead time: 10-15 days REQUEST A QUOTE How can we help you? Contact our Customer Service: Tel. +86-760-8761-7850 Mon-Fri 9:00-18:00 Sat. 10:00-17:00 (UTC+8) sales@espadainteriors.com Overvi , ew Specification Description of Modern Replica Flos Captain Flint Floor Lamp The Flos Captain Flint Floor Lamp was designed by Michael Anastassiades, it is a versatile illuminator providing both atmospheric lighting and task lighting for reading or other activities. The dimmer and the spinning cone-shaped head allow you to choose between direct or indirect light in order to create the desired mood. Designed by Michael Anastassiades, the Captain Flint floor lamp has a sleek and refined expression that suits any interior. The round marble base adds a touch of luxury to the understated design. Features of Modern Replica Flos Captain Flint Floor Lamp The Flos Captain Flint Floor Light features a funnel shade held by a metal stem. The shade is painted white on the inside to ensure a soft comfortable light. The round marble base is diameter 30CM, with white or black color options. Weighing 9kg, the lamp is stable enough to rest on any floor surface without the possibility of tilting over, indoors or out. This iconic lamp can provide enough light for a living room and bedroom. The 250cm cable length makes it possible to use the lamp in any corner of the room and also allows the user to shift the piece from one place to another when needed. On/Off footswitch is located on the cable. Specifications of Mondern Replica Flos Captain Flint Floor Lamp Fixture Design Modern, Metal Dimensions W36×H155cm Primary Material Iron and marble Color options White, Black, Gold Base type E27 / E26 Voltage 220-240V/120V Wattage Max. 40W Number of lights 1 (not included) Light Direction Down Cord Length 200CM Switch Type In-line of/off foot switch Certificates CE, RoHs, SAA, UL Espada Light is a professional lamps electrical wholesaler, we provide fiberglass lighting, marble lamps for sale, brass lamps, fiberglass lamp, bed lamps for sale, brass lamps for sale, modern table lamp and etc. Want to know brass lamp price or more? contact us.

Minimum Order: 1 bags

Enzymes in chicken Chicken Roulade Product: TG-CK Advantages: Water-retention , Cost-effective Structured products are thermo-irreversible Transform cuts into unified portions with a high-added value Chicken Breasts Product: TG-CK Advantages: Water-retention , Cost-effective Structured products are thermo-irreversible Transform cuts into unified portions with a high-added value Visit our website for more information about natural food additives list!

Minimum Order: 50

Enzyme in cheese production process. Step 1: raw milk preparation Step 2: homogenization Step 3: pasteurization Step 4: fermentation (add TG) Step 5: coagulation Step 6: cutting Step 7: draining of whey Step 8: molding Step 9: ripening Step 10: finished products Advantages of Using lipase in cheese vegetarian Reduce syneresis Increase yield between 10%-20% Facilitate slicing process Provide a better structure Reduce or replace the usage of emulsifiers or stabilizers Cut cost by reducing proteins and other preservatives used in cheese Contact us for more information about vegetable enzymes in cheese! We have a natural food additives list, if you want to know more details, contact us.

Minimum Order: 50

Yoghurt Products Product: TG-DR Advantages: Reduce syneresis Enhance the gel strength Improve the viscosity and consistency Reduce or replace the usage of emulsifiers or stabilizers Cut cost by reducing proteins and other natural additives Cheese Products Product: TG-DR Advantages: Reduce syneresis Increase yield between 10%-20% Facilitate slicing process Provide a better structure Cut cost by reducing proteins and other additives Reduce or replace the usage of emulsifiers or stabilizers If you want to get more information about dairy enzymes,please visit our website.

Minimum Order: 50

Yiming Biotech works with you to deliver high-quality products your customers want. Our custom blending, custom formulation service is designed to meet specific client formulation and application needs by providing a tailored solution for every customer. When approached with an application need or replacement to an existing enzyme, we will develop solutions that provide you with exact custom enzymes or substitutes that can offer you cost savings and increase efficiency. Please contact our experienced sales team to create your own custom-blended product. E-mail: info@yimingbio- , tech.com sales@yimingbio-tech.com Te , l: 86-21-68580630

Minimum Order: 50