Other Instruments & Parts

CPVC Fitting female coupling is mainly used to connect the pipes with accessories, because screw is easy to connection and disconnection, when the accessories or equipment fail it will be easy to screw out and replace an new one. the CPVC Pipe Fitting thread end is BSPT, and socket end is DIN, CPVC Pipe Fitting PN16 size from 20mm to 63mm. pressure rate PN16 bar. RMI PLAST offer CPVC female coupling with following specifications: Size: D20mm to D63mm Standard: DIN Working pressure: 1.6Mpa(PN16 bar) Working temperature: 0C to 95C

Minimum Order: 100

UPVC Pipe Fitting flange have two models, one is one piece flange, and another is van stone flange . PVC Fitting flange is designed according to standard DIN with pressure rate PN16. PVC Pipe Fitting flange has good property of corrosive resist, strength, anti-aging. PVC pipe fitting is mostly used for water supply, water treatment, mining, fishing farm, irrigation, etc. RMI PLAST offer PVC Fitting flange socket PN16 with following specifications: Size: D20mm to D350mm Standard: DIN Working pressure: 1.6Mpa(PN16 bar) Working temperature: 0C to 65C Product

Minimum Order: 100

User friendly dialog interactive helps operations like Calibration, making curves, etc. ★ All tools you need: DAC, AVG, TCG AWS, etc. ★ Pulse Repeatition Frequency: 10-2000Hz precise adjust, high speed scan, no miss out. ★ High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions. ★ 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws. ★ Can use probe frequency 20M perfectly . ★ IP65 standard. Protective rubber casing. Damping support makes it stands in any angle. ★ Battery lasts 15 hours for one charge.

This is a fire test for determining values of flame propagation height for electrical and optical-fiber cables that are for installation vertically in shafts or in vertical runs that penetrate one or more floors. The purpose of this test is to determine whether the flame propagation characteristics of these "riser" cables are in accordance with the National Electrical Code. 1. U-shaped pressure gauge: the pressure of the test chamber are maintained at 0-12pa. 2. Hygrometer: measure the temperature and humidity of the test chamber. 3. Structure of the test box: the overall structure is made of concrete wall, the first floor is 1.22m, and the second floor is 3.66M. The top floor is 2.24m, and the external dimension is 7.12mx1.3m wide x2.5m long. 4. The wall structure is a concrete with a density of 1061b/ft3 (1698kd/m), and its thermal conductivity (k) is 0.38btu (0.055w/mk) at 21.1c. The first and second layers are composed of 203mm thick reinforced ordinary weight cement, and the top is composed of a wall structure that can ensure tightness. The measuring holes on the second layer must be vertically above the measuring holes (305mmby610mm) on the first layer. Each hole is 203mm from the back of the box and 102m from the side of the box 5. The ignition device is composed of a 1/2 inch steel pipe, a 1/2 inch elbow and a steel ignition dispersion plate. 6. Install a propane flowmeter at the place of gas injection. 7. Install exhaust fan and anemometer at the outlet of fan test box.

Universal internal Bluetooth twelve sensors Tire pressure monitoring system for Passenger car 2.4Ghz Specifications LCD pannel,with extra Micro USB port for charging. Real-time Monitor the tempreature and pressure with high degree accuracy RF wireless technology,can auto-alarm,when tire pressure and temperature is abnormal. Support tire position exchange function. With Freescale Chip and RENATA anti-explosion battery. Real-time Wireless Car Tire Pressure Monitoring System Solar External Internal Universal TPMS Hot sale bluetooth external tpms tire pressure monitoring system Once BLE tire sensor installed in wheel, tire pressure and temperature can be displayed in cellphone with APP. During travel, tire pressure and temperature displayed in real time and send alert when statistics' abnormal. For your safety, please read manual before using, thank you! sensor parameters Sensor dimensions 7.1cm*5.3cm Sensor plastic part material Nylon / glass fiber Temperature resistance of the shell -50℃-150℃ Volume resistivity of silica gel ≥1.0×1013Ω•cm The silicone heat-resistant -50℃-200℃ Antenna material Phosphor copper nickel platin Metal material of valve Aluminium (oxidation treatment) Rubber pad material EPDM Valve weight 14.0g Full weight of sensor (including valve nozzles) 26.5g±2g Sensor working temperature - 40℃-85℃ Battery model CR2032 Battery capacity 350mAh working voltage 2.1V-3.3V Emission current 140uA Self-checking current 2.5mA Sleep current 2.4uA Battery temperature resistant -40℃-125℃ Emission frequency 2.4GHZ Emissive power 0dbm

FG-1200 Fiber optic inertial navigation system is a medium precision inertial measurement equipment with high performance but cost-effective. It uses model 120 interferometric fiber optic gyroscope and quartz flexible accelerometer as inertial sensor. It can provide real-time high precision three-dimensional attitude angle (true North heading angle, pitch angle and roll angle), carrier angular velocity (azimuth velocity, horizontal velocity and vertical velocity), instantaneous displacement (heave, surge and sway) for carrier. This system also offers medium precision positioning information for carrier without external sensors. FG-1200 guarantees system accuracy through high precision error calibration and full temperature compensation technology. It adopts electromagnetic shielding design, thermal balance design, vibration mode design, sealing design and strict manufacturing process to ensure excellent environmental adaptability. High performance FOG Combat Proven AHRS+INS in a single unit Anti-disturbance self-alignment while moving Rich in connections, GPS/GNSS/Speed LOG DVL/USBL input acceptable Configurable navigation mode: INS/Integrated Naviation Perfectly suited for all types of carriers

Product Introduction AQ7660 fugitive dust (noise) monitoring system monitors the concentration of particulate matter by the national standard β-ray method. Product Performance 1. The national standard method is adopted for monitoring, so that the data is accurate and reliable; 2. It has dynamic heating function and powerful anti-interference ability; 3. The β-ray method has the advantages of superior equipment performance, long maintenance and calibration cycle, and less equipment maintenance. Product Parameter Product Name Ambient Air Quality Monitoring Instruments Size 1700×950×930mm Weight 35KGS Measurement Range (0-10000) ug/m3 Measurement Error ±10% Zero Drift ±5%FS Repeatability ≤5% Packing Wooden Case Sampling Flow Stability ±5%

Mud Gun is also called drilling fluid gun which is solid control equipment produced by DC Solid control. Mud Gun is divided into low pressure, medium pressure and high pressure. It is located in the top of the drilling fluid circulating tank and mainly used in the tank corner to prevent solid precipitation or and wash the bottom of the tank,it also can transport the mud between tank and tanks. Besides, mud guns can be supplied by centrifugal pump or mud pump. Mud Guns produced by our company have the advantages of good spray effect ,large clean area,simple structure,flexible operation and easy to use.

White copper casting Category:Copper alloy casting white copper casting uses nickel as the main additive element, and its appearance has a silver-white metallic luster, much like silver. It is widely used in shipbuilding, petrochemical, electrical appliances, medical equipment and other fields. Cupronickel is a copper alloy product with nickel as the main additive element. The appearance is silvery white and has metallic luster, so it is called cupronickel. It can produce cupronickel casting products that meet the grades of Cu-OF, Cu-ETP, Cu-DHP, Cu-DLP and so on. Cupronickel products have excellent corrosion resistance and are easy to shape, process and weld, so they are widely used in shipbuilding, petrochemical, precision instruments, medical equipment and other industries. And because the appearance of cupronickel is close to that of silver, it can also be used to make decorative handicrafts.https://www.foundryseiko.com

Minimum Order: 1000

Instruments for LAB

Customize All Kinds Of Precision Cosmetic Injection Molds And Injection Molding​ High quality gurranteed Material strictly as required and can provide material certificate Precision machining process with a good control of tolerance High quality surface treatment 100% inspection before shipment,test report of final products can be provided. our serve 1. Diverse material range: Plastic (ABS,PP,PC,POM,Acrylic,PEEK and so on) Metal (Steel,stainless steel,aluminum alloy,copper,brass,bronze alloy are available) 2. Multiple Surface treatments: Plastic Products (Polishing,Painitng,Texturing,Silk Printing ...) Metal Products ( Polishing,Plating,Anodizing,Zinc plating, Nickel plating, Powder coating, Chomed,Brushing) 3. Rich experience in processing and manufacturing more than 10 years 4. 100% manufacturer,ensure quality and lead time better.

LiDAR Scanning System with HESAI XT Laser Sensor Mounted on DJI M600 Pro gAirHawk GS-130X is a kind of short-range, compact LiDAR point cloud data acquisition system, integrated HESAI XT laser scanner, GNSS and IMU positioning and attitude determination system, and storage control unit, is able to real- time, dynamically, massively collect high-precision point cloud data and rich image information. It is widely used in the acquisition of 3D spatial information in surveying, electricity, forestry, agriculture, land planning.

The instrument is a stable and high performance digital multimeter driven by battery. It uses the LCD with 26mm high make the reading is clearly. And the function of 20sec. back light and overload protection make operation is convenient. The instrument has the function of measuring DCV, ACV, DCA, ACA, resistance, capacitance, and diode, triode and continuity test. The instrument takes dual- integral A/D converter as key point, is an excellent tools. 1．Displaying : LCD displaying 2．Max. indication: 1999(3 1/2), auto polarity indication 3．Measuring method: dual slope A/D transfer 4．Sampling rate: approx. 3 times/sec 5．Over range indication: MSD displays “OL”” 6．Low battery indication: “” symbol displays 7．Operation: 0～40℃,relative humidity <80% 8．Power:one 9V battery (NEDA1604/6F22 or equivalent) 9．Meas.:190×88.5×27.5 mm 10．Weight: approx. 320g(including one 9V battery) 11. Accessories: test leads, instruction manual, holster, gift box and battery 12. Test accessories: TP01 temperature probe

Manufacturer : Rosemount Product No. : 3051TG2A2B21BB4E8D4M5Q4 Product type : In-line Pressure Transmitter Pressure type : G = Gage Pressure range : 2 = –14.7 to 800 psi (–1,01 to 55,15 bar) Transmitter output : A = 4–20 mA with digital signal based on HART Protocol Process connection style : 2B = 1/2–14 NPT female (range 1–5 only) Isolating diaphragm,Process connection wetted parts material : 2 = 316L SST,316L SST Sensor fill fluid : 1 = Silicone Housing material,Conduit entry size : A = Aluminum,1/2–14 NPT Mounting bracket : B4 = Bracket for 2-in. pipe or panel mounting, all SST Product certifications : E5 = FM Explosion-proof, Dust Ignition-proof Calibration certification : Q4 = Calibration certificate Display and interface options : M5 = LCD display Shipping weight : 7Kg