Other Instruments & Parts

Mud Gun is also called drilling fluid gun which is solid control equipment produced by DC Solid control. Mud Gun is divided into low pressure, medium pressure and high pressure. It is located in the top of the drilling fluid circulating tank and mainly used in the tank corner to prevent solid precipitation or and wash the bottom of the tank,it also can transport the mud between tank and tanks. Besides, mud guns can be supplied by centrifugal pump or mud pump. Mud Guns produced by our company have the advantages of good spray effect ,large clean area,simple structure,flexible operation and easy to use.

White copper casting Category:Copper alloy casting white copper casting uses nickel as the main additive element, and its appearance has a silver-white metallic luster, much like silver. It is widely used in shipbuilding, petrochemical, electrical appliances, medical equipment and other fields. Cupronickel is a copper alloy product with nickel as the main additive element. The appearance is silvery white and has metallic luster, so it is called cupronickel. It can produce cupronickel casting products that meet the grades of Cu-OF, Cu-ETP, Cu-DHP, Cu-DLP and so on. Cupronickel products have excellent corrosion resistance and are easy to shape, process and weld, so they are widely used in shipbuilding, petrochemical, precision instruments, medical equipment and other industries. And because the appearance of cupronickel is close to that of silver, it can also be used to make decorative handicrafts.https://www.foundryseiko.com

Minimum Order: 1000

Shengda water meter CO.,LTD focus On R&D And Produce Mechanical Water Meter, Smart Water Meter,Ultrasonic water meter and flow meter since 1995,we not only produce water meter,also offer total solution of smart water meter reading,support OEM/ODM. Deliver condition of LoRaWan water meter 1. Model:LXSY 15~LXSY 300LoRaWAN water meter 2. Size:DN15-DN300 3.Body:Brass(with valve)/iron(without valve) 4.Type:Dry dial/wet dial(standard) 5.Max work pressure:PN16. 6.Protection class:IP68 7.Protocol: LORAWAN 8.Frequency: 433 to 923 MHz 9.Battery: ER18505M @ 3600mAh can last up to 8-10 years. 10.Pressure loss:≤0.063Mpa 11.Water temperature:T30,T90 12.Standards:ISO4064. 13 , .Certificate:MID 14.Working mode: Class A 15.Software:free for clients 16.Composition:LoRaWAN water meter,Gateway,Network servrt. Contact person : Miranda Office Email: admin(at)henanpanda(dot)com WhatsApp:+86 18603780816 SHENGDA water meter CO.,LTD

Minimum Order: 1 bags

Instruments for LAB

Customize All Kinds Of Precision Cosmetic Injection Molds And Injection Molding​ High quality gurranteed Material strictly as required and can provide material certificate Precision machining process with a good control of tolerance High quality surface treatment 100% inspection before shipment,test report of final products can be provided. our serve 1. Diverse material range: Plastic (ABS,PP,PC,POM,Acrylic,PEEK and so on) Metal (Steel,stainless steel,aluminum alloy,copper,brass,bronze alloy are available) 2. Multiple Surface treatments: Plastic Products (Polishing,Painitng,Texturing,Silk Printing ...) Metal Products ( Polishing,Plating,Anodizing,Zinc plating, Nickel plating, Powder coating, Chomed,Brushing) 3. Rich experience in processing and manufacturing more than 10 years 4. 100% manufacturer,ensure quality and lead time better.

LiDAR Scanning System with HESAI XT Laser Sensor Mounted on DJI M600 Pro gAirHawk GS-130X is a kind of short-range, compact LiDAR point cloud data acquisition system, integrated HESAI XT laser scanner, GNSS and IMU positioning and attitude determination system, and storage control unit, is able to real- time, dynamically, massively collect high-precision point cloud data and rich image information. It is widely used in the acquisition of 3D spatial information in surveying, electricity, forestry, agriculture, land planning.

The instrument is a stable and high performance digital multimeter driven by battery. It uses the LCD with 26mm high make the reading is clearly. And the function of 20sec. back light and overload protection make operation is convenient. The instrument has the function of measuring DCV, ACV, DCA, ACA, resistance, capacitance, and diode, triode and continuity test. The instrument takes dual- integral A/D converter as key point, is an excellent tools. 1．Displaying : LCD displaying 2．Max. indication: 1999(3 1/2), auto polarity indication 3．Measuring method: dual slope A/D transfer 4．Sampling rate: approx. 3 times/sec 5．Over range indication: MSD displays “OL”” 6．Low battery indication: “” symbol displays 7．Operation: 0～40℃,relative humidity <80% 8．Power:one 9V battery (NEDA1604/6F22 or equivalent) 9．Meas.:190×88.5×27.5 mm 10．Weight: approx. 320g(including one 9V battery) 11. Accessories: test leads, instruction manual, holster, gift box and battery 12. Test accessories: TP01 temperature probe

Manufacturer : Rosemount Product No. : 3051TG2A2B21BB4E8D4M5Q4 Product type : In-line Pressure Transmitter Pressure type : G = Gage Pressure range : 2 = –14.7 to 800 psi (–1,01 to 55,15 bar) Transmitter output : A = 4–20 mA with digital signal based on HART Protocol Process connection style : 2B = 1/2–14 NPT female (range 1–5 only) Isolating diaphragm,Process connection wetted parts material : 2 = 316L SST,316L SST Sensor fill fluid : 1 = Silicone Housing material,Conduit entry size : A = Aluminum,1/2–14 NPT Mounting bracket : B4 = Bracket for 2-in. pipe or panel mounting, all SST Product certifications : E5 = FM Explosion-proof, Dust Ignition-proof Calibration certification : Q4 = Calibration certificate Display and interface options : M5 = LCD display Shipping weight : 7Kg

Data quality requirements: During the equipment life cycle, the data integrity rate shall not be lower than 95%, and the continuous failure time shall not exceed 5 days. Specifically, it shall be implemented according to the requirements of the bidding documents, the terms of the contract and the commitment of the bidders in the bidding documents. 2,Product parameters General parameters Powered by 24V DC / 100~240V Power 70W Size 682mm x 520mm x 641mm Weight <75kg Range of working temperature -40℃ ~ 50℃(with over temperature protection) Operating humidity range 0% to 100% Protection class IP67 (complete machine) Eye safety Class 1M (EN60825-1)

Introduction: ATN-300 automatic Kjeldahl nitrogen analyzer (also known as Kjeldahl protein analyzer) is designed based on Kjeldahl method. It is mainly used to detect food, food, dairy products, beverages, feed, ammonia nitrogen, protein nitrogen, etc. in soil, water, drugs, sediments and chemicals. Main features: 1. Manual and automatic two modes can be arbitrarily switched, and the amount of boric acid absorption liquid, alkali amount and distillation time can be arbitrarily set; 2. Can store 20 sets of experimental procedures to meet the different needs of users; 3. The automatic cleaning system automatically cleans the pipeline after each sample is distilled, so that the measurement accuracy is higher; 4. The safety protection system is perfect: digestive tube absence prompt, safety door absence prompt, the steam oven is over-temperature and over- pressure protection; 5. Automatic hydration, the amount of recovery liquid can be adjusted at will; 6. With automatic recycling alarm function; 7. Manual and automatic modes can be switched at will to meet different needs of customers.

This digital multimeter can not only meet the needs of daily life measurement, but also become a professional measurement teaching tool. Features: 2.88 inch LCD display screen, 18mm thin. Automatic identification, automatic measurement. High accuracy, gear protection and intelligent test. Functions: intelligent recognition, safety tube disconnection prompt, True RMS, AC/DC voltage test, AC/DC current test, resistance test, on off beep, frequency test, capacitance test, diode test, NCV (non contact voltage), Live (fire line identification), LEAD (jack error prompt), key operation, data hold, backlight. Flashlight design lets you test efficiently and comfortably anywhere, indoors and outdoors, day and night. Soft cover protection, antiskid and comfortable to handle.

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives sustained pressure to the metal, thus forming the solidifying hard-shell. The metal crystallization and solidification process is conducted under the pressure, so the defects such as shrinkage and porosity are greatly diminished. An almost defects-all-free product could be achieved by this technic. The Classification of Squeeze Die Casting There are 2 subdivisions of the squeeze casting aluminum: the direct squeeze casting and indirect squeeze casting. The formal technic is to give the pressure directly on the surface of liquid metal, while the last technic is to pressure the liquid maintaining in the gating part of the casting mold. Usually the direct squeeze casting has better resulted product than the indirect squeeze casting. Advantages of Squeezing Die Casting Extrusion casting is a process method to obtain castings (or ingots) by applying high mechanical pressure to liquid (or semi-solid) metals and metal matrix composites that enter the casting mold at a low speed so that they can be formed and solidified under pressure. Extrusion casting is the product of the combination of casting and forging, is a process between casting and forging, extrusion casting is close to forging in terms of performance. This extrusion casting process method can cast more complex pieces than forged parts. Due to the pressure molding, compared with other casting methods, the density is higher. Compared with forging, the price is relatively low because the mold is formed once. Due to the solidification under pressure, there are fewer internal defects, close to the forging organization, so the extrusion casting parts can be heat treated. Application of Squeezing Die Casting in Automobile Parts At present, die-casting is a more mature process method, die-casting is cheaper, first of all, a large number of applications in the engine pressure casting, compared with sand casting has the advantages of fast and high precision. In terms of strength can meet the requirements. However, the surrounding bearing parts have a tendency to use pressurized casting. Extrusion casting: vertical filling. High-pressure aluminum alloy liquid enters the mold cavity from the bottom upwards, the gate area is larger the speed is slower, and the gas can be exhausted from the exhaust tank. Extrusion casting is suitable for making wall thickness parts. Most of the automotive parts can be made by extrusion casting, but it is not advantageous for thin-walled parts. With the increasing call for lighter cars and lighter cars requiring more and more, extrusion casting is a technology with greater prospects. Rayforce Manufacture is a private castings company, we provide metal casting china, cast iron and ductile iron and etc. Want to know more? Please contact us.

Minimum Order: 3000

Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in white powder, non toxic and non-inflammable. It is suluble in water in various amount. A more common name for sodium silicate is water glass, which is used in the iron or steel sand casting. The water glass works as a binder of the sand. It allows the rapid production a strong sodium silicate sand casting mold, by CO2 through the mixture of sand and sodium silicate in the mold, which hardens it almost instantly. Basic Property of Sodium Silicate Casting Product dimension tolerance ±0.5mm, CT7~8. surface finish Ra3.2. wall thickness up to 7mm. unit weight extent 1~20000kg. unit size limitation 0.03~3.5 meter. degree of complexity- complex. machining required- normal production lead time- short. production cost- low. Notice of Sodium Silicate Sand Casting Though in most conditions, sodium silicate sand casting is considered to be investment casting, but actually it also could be applied in the sand casting. Besides, sodium silicate sand casting is more suitable to make the large and complex structures and with even better surface finish and less defects. Principle of Sodium Silicate Casting The principle of sodium silicate casting industry and the detailed steps: melt the glass and mold it through the mold. Generally realize that after the mold is made, the glass melt is injected into the mold or realize that the pre-made mold is stacked with glass scrap in the mold, and put into the furnace together with the mold for melting, and anneal the mold with the glass domain anastomosis after molding. Rayforce Manufacture is a private foundry supplier, we provide metal casting china, silica sand casting and etc. Want to know more? Please contact us.

Minimum Order: 3000

The silica sol also shares the name of water glass in general, it is used by the meatal casting process as mold adhesive which is mixed with sand and several other materials. The silica sol is applied to both sand casting and investment casting technics. It is one of the most common investment casting processes. As the molding material, silica sol is able to stand temperature up to 1800℃. Similar to other investment casting processes, the silica sol investment casting process mainly consisted of wax injection, assembly, shell preparation, dewax, pouring, cut-off, and finished casting, etc. Compared to the resin investment casting, the silica sol method dewaxes into the high-temperature water, and the ceramic mold is made of water glass quartz sand. The surface quality is not as good as the resin casting, but it's cheaper and a bigger-sized part could be manufactured than silica sol casting. Application of Silica Sol Casting Mainly the silica sol is applying to the precision casting, because of its relatively high production cost but gives out a very fine accurate dimension, nice surface finish, and very good quality result overall. One of the other advantages for silica sol is that the internal defects such as porosity, holes, shrinkage are better controlled compared to another way of casting. So when you looking for a method to produce a small part but with high accuracy, surface demand, high corrosion resistance and you don't want to waste time waiting for the casting quality in slow improved gradually, silica sol investment casting is surely on your options list. The Basic Property of the Product Made by Silica Sol Casting: dimension tolerance ±0.1mm, CT4~6； surface finish Ra6.3; wall thickness up to 1mm; unit weight extent 0.1~100kg; unit size limitation 0.01~0.5 meter; degree of complexity- very complex; machining required- less or none due to its accurate dimension; production lead time- long; production cost- high; Influence Factor in Silica Sol Investment Casting The whole casting process has more than 40 procedures, the process is complex, and there are many process factors that affect the casting quality. There are many kinds of raw and auxiliary materials, such as silica sol, wax, zircon sand, molybdenum powder, defoamer, wetting agent, steel, rare metal, etc. According to the different mesh, there are more than 10 kinds of sols, including precision casting surface silica sol, precision casting backside silica sol, ordinary silica sol, enhanced silica sol, fast-drying silica sol, and zirconia powder. It is not suitable to control its quality, which affects the casting quality in different degrees. The production cycle is long and there are many uncontrollable factors. In the whole process, only the shell-making process takes 3-5 days. It takes 6-8 hours to dry the surface shell of silica sol, 4-6 layers to dry the back shell of silica sol, and 8-12 hours to dry the shell without silica sol. There are too many uncontrollable factors and defects will be formed with slight deviations in the process operation. Rayforce Manufacture is a private metal casting supplier, we provide metal casting china, vacuum die casting and etc. Want to know more? Please contact us.

Minimum Order: 3000