Insulating & Fireproofing Materials

Water-repellent glass wool board/roll mat is a heat insulation material with excellent water-repellent properties. It uses a special production process to surface treat the glass wool fibers to increase their repellency to water, thereby significantly improving the material's water resistance. This material is typically used in environments where long-term insulation is required and where there is a risk of exposure to moisture, such as roofs, walls, floors, and insulation for pipes and equipment. Water-repellent glass wool boards/rolls and felts can be cut to different sizes and shapes as required, making them easy to install and suitable for use on surfaces of various complex structures.   Product Performance: 1. high thermal insulation: low thermal conductivity ensures excellent thermal insulation effect and effectively reduces energy consumption. 2. strong hydrophobicity: after special treatment of the glass wool fibers to enhance the ability to repel water, even in a humid environment can maintain stable thermal insulation performance. 3. good sound absorption: due to its porous structure, glass wool also has excellent sound absorption and noise reduction function. 4. strong durability: good chemical stability, not easy to aging, can withstand the impact of harsh climatic conditions. 5. environmental protection and energy saving: the use of recyclable materials, does not contain harmful substances, in line with ecological and environmental protection standards. 6. Good compatibility: It can be used in combination with a variety of building materials, such as gypsum boards and paints. 7. Convenient construction: lightweight materials are easy to handle and cut, simplifying the installation process. 8. Safety performance: the material itself is non-combustible, providing additional fire protection. 9. Mold and corrosion resistance: water-repellent treatment reduces the risk of mold and corrosion caused by humidity. 10. Strong applicability: Sheet and coil forms allow it to be adapted to different applications and construction requirements. To summarize, water-repellent glass wool board/roll mat is a high-performance thermal insulation material, especially suitable for use in construction projects with waterproofing requirements. It combines excellent thermal insulation, acoustic noise absorption and waterproof and moisture-proofing functions to provide an ideal thermal insulation solution for architectural and industrial applications.

Rubber and Plastic Insulation Board is a closed-cell structure flexible foam material specifically designed to provide excellent thermal insulation and insulation properties. It is made of high-quality rubber and plastic polymers with excellent cold, heat and aging resistance. Suitable for use on a variety of pipes, ducts and equipment surfaces to ensure energy efficiency and comfort. Here are some of the key features and benefits of this product:   1. High efficiency and energy saving: extremely low thermal conductivity ensures excellent thermal insulation performance and helps reduce energy loss.   2. Good flexibility: easy to bend and shape, can wrap irregular-shaped pipes and equipment, and is easy to install.   3. Excellent weather resistance: It can resist the effects of ultraviolet rays, ozone and harsh climate, and is not prone to aging or embrittlement.   4. Excellent moisture resistance: The closed-cell structure prevents moisture from entering and maintains good thermal insulation effect even in humid environments.   5. Safety and environmental protection: It does not contain CFCs, HCFCs or HFCs and other substances harmful to the ozone layer, and complies with the latest environmental protection standards.   6. Wide applicable temperature range: It can work stably in the temperature range of -40°C to +105°C, and is suitable for different environments and application scenarios.   7. Fireproof properties: It is a flame-retardant material, which can reduce the risk of fire spread and improve the overall safety of the building.   8. Antibacterial and anti-mildew: It is not easy to breed bacteria and mold, maintaining environmental hygiene and long-term use of the board.   9. Wide scope of application: It can be used in various types of hot and cold medium pipes and containers in central air conditioning, construction, chemical industry, medicine, textiles, metallurgy, ships, vehicles, electrical appliances and other industries and departments, and can reduce cold and heat losses. Effect. And because it is easy to construct, clean and beautiful in appearance, and has no pollution, it is a high-quality, cross-century, new generation of thermal insulation material. Due to the softness and resistance to bending of this material, it can be processed into handles and sheaths for fitness equipment, medical equipment, daily necessities, etc.   Product performance: - Thermal conductivity: low to achieve efficient thermal insulation effect. - Compressive strength: Moderate to facilitate installation and withstand certain loads. - Anti-aging: Excellent, ensuring long-term use without loss of performance. - Water absorption: extremely low to maintain stable thermal insulation performance. - Combustion performance: flame retardant to improve overall safety performance. - Environmental protection standards: Meet international environmental protection requirements and no harmful substances are released. - Adaptability: Good adaptability allows it to be used in a variety of different environments.

The BGM-CF34 Thermal Barrier Strip is a high-performance nylon-based insulating component engineered for modern architectural aluminum systems. Designed to interrupt heat transfer between interior and exterior aluminum profiles, this strip significantly improves energy efficiency, reduces thermal bridging, and enhances indoor comfort in curtain walls, windows, and doors. Made from quality polyamide with excellent mechanical strength and dimensional stability, it also supports long-term structural integrity under environmental stress. https://www.bgm-greenmaterial.com/insul , ation-thermal-break-strip.html

Phenol-formaldehyde resin (PF) is a polymer made by polycondensation of phenolic compounds and aldehyde compounds. It is one of the three major synthetic thermosetting resins. Performance characteristics Good high temperature performance: The cured phenolic resin has excellent heat resistance due to its aromatic ring structure and high crosslinking density. Generally, at 200°C, the heat resistance of phenolic resin is good. After long-term use at 180°C, it can still maintain its structural integrity and dimensional stability. High residual carbon rate: When it exceeds 300°C, phenolic resin will decompose and gradually carbonize to form residues, and its residual amount is as high as 60%. At a temperature of 800-2500°C, phenolic resin will generate a layer of carbonized material on the surface of the material.

SQ Insulation presents the Felt-Cloth Two-Sides Faced PF Board – a revolutionary phenolic foam insulation solution combining exceptional thermal performance with unparalleled fire safety. As high-performance insulation materials gain global prominence, our PF board stands out with industry- leading 0.020-0.022 W/mK thermal conductivity, outperforming conventional alternatives by up to 200% in efficiency. Engineered Excellence: Key Technical Advantages Ultra-Low Thermal Conductivity (0.020 W/mK): Provides superior insulation with 40-60% better performance than mineral wool or EPS Non-Combustible Certification: Meets ASTM E84 Class A fire rating with limited smoke development (≤50) Closed-Cell Structure: 0.25% water absorption by volume ensures moisture resistance in humid climates ECO-Friendly Composition: Freon-free manufacturing process with ODP (Ozone Depletion Potential) of 0 Dimensional Stability: ≤0.1% size variation between -40°C to +80°C temperature ranges Our thermal insulation boards are engineered for: ETICS (External Thermal Insulation Composite Systems) with ≤0.032 W/mK U-value compliance Curtain wall insulation with 50psi compressive strength

Our SQ PF Board represents the pinnacle of high-performance thermal insulation technology, combining exceptional fire resistance with outstanding thermal efficiency. As one of the most advanced phenolic foam insulation solutions on the market, it delivers unparalleled protection against heat transfer while meeting stringent fire safety regulations. Industry-Leading Technical Specifications Parameter Value Thickness 20-250mm Standard Width 600/900/1000/1200mm Length Customizable Foam Density 40-100kg/m³ Thermal Conductivity 0.02W/m•K Water Absorption 0.25% by volume Compressive Strength ≥50psi Tensile Strength ≥25psi Dimension Change 0.1%

Our SQ PF Board represents the next generation of rigid foam insulation, engineered to deliver unmatched thermal efficiency with a 0.020-0.022 W/m·K conductivity rating - outperforming conventional EPS/XPS boards by 50-100% in R-value. This foil-faced insulation solution combines cutting-edge polymer technology with stringent fire safety compliance, making it ideal for commercial and residential applications where energy conservation and passive fire protection are paramount. Key Technical Advantages Ultra-Low Thermal Conductivity (0.020 W/m·K) for maximum heat retention Class A1 Fire Rating with minimal toxic gas emission (meets EN 13501-1 standards) Closed-cell structure achieves Dimensionally stable (±0.1% size variation under thermal cycling) Freon-free manufacturing with 100% ozone-friendly blowing agents Specifications Parameter Value Thickness Range 20-250mm (customizable in 10mm increments) Standard Width 600/900/1000/1200mm Compressive Strength ≥50psi (344kPa) Tensile Strength ≥25psi (172kPa) Service Temperature -180°C to +120°C

The phenolic duct system is designed for high-risk environments. It uses closed-cell foaming technology to achieve ultra-low thermal conductivity (0.022W/m·K), which is 80% lighter than traditional metal ducts and meets Class A fire protection standards. The smooth inner wall design reduces wind resistance and is suitable for commercial buildings, laboratories and industrial exhaust systems. ​Attribute Category ​Attribute Item ​Attribute Value Example ​Basic Information Product Model SQ-PF-120 (FireSafe Phenolic Duct 120 kg/m³) Material Composition Phenolic resin + Glass fiber reinforcement layer + Flame retardant additives Color Standard gray / Custom colors (RAL color chart supported) ​Physical Properties Density 120 kg/m³ ±5% Thermal Conductivity ≤0.022 W/(m·K) Compressive Strength ≥0.15 MPa (ASTM D1621 standard) ​Fire Performance Fire Resistance Class Class A Non-combustible (GB 8624-2012 / ASTM E84 Class A) Smoke Density Rating ≤5 (GB/T 8627) ​Environmental Adaptability Operating Temperature Range −40°C ~ +150°C Corrosion Resistance Resists acids/alkalis, anti-mold (ASTM G154 certified) ​Installation Parameters Standard Length 3m / 6m (custom cutting supported) Connection Method Flange connection / Socket joint (compatible with ISO 13351 standard) ​Certifications & Compliance International Certifications CE / UL 723 / RoHS

1.R&D Innovation: The company prioritizes research and development, leveraging years of industry experience and the expertise of its technical team. Through extensive process experimentation, it has broken through the limitations of traditional products, developing a variety of VIP (Vacuum Insulation Panel) forms to meet customized customer needs. 2. Eco-Friendly Materials: VIP panels use high-performance glass fibers or fumed silica as the primary materials, ensuring the products are environmentally friendly, non-toxic, pollution-free, and non-combustible, meeting modern environmental and safety standards. 3. Exceptional Performance: Utilizing vacuum encapsulation technology, VIP panels effectively reduce heat conduction, convection, and radiation, significantly minimizing heat transfer and featuring an extremely low thermal conductivity coefficient. Additionally, the products are lightweight, facilitating easy installation and use.

Wide-Temperature Range Vacuum Insulation Panels (Metal Vacuum Insulation Panels, M-VIP) are high-performance insulation materials designed for extreme temperature environments. They offer exceptional thermal insulation performance across a broad temperature range from -196°C to 800°C. By combining vacuum technology with metal barrier layers, the product achieves an extremely low thermal conductivity and excellent compressive strength. It is widely used in aerospace, new energy, household appliances, and industrial equipment. Product Features 1. Wide Temperature Range Applicability ▪ Suitable for a wide temperature range from ultra-low -196°C to high 800°C, meeting insulation requirements in extreme environments. 2. Long Service Life ▪ Service life of up to 50 years, with outstanding durability and stability. 3. High Compressive Strength ▪ Compressive strength ≥ 0.5 MPa, capable of withstanding significant external pressure, suitable for various complex working conditions. 4. Ultra-Low Thermal Conductivity ▪ Thermal conductivity ≤ 0.002 W/(m·K), providing excellent insulation performance and effectively reducing energy loss.

Fumed Silica Vacuum Insulation Panels (VIP) are high-performance thermal insulation materials primarily composed of fumed silica as the core material. With excellent thermal insulation properties, lightweight and thin design, and fire resistance, this material has broad application prospects in fields such as construction, cold chain logistics, HVAC (heating, ventilation, and air conditioning), and more. It is a key material for energy saving, emission reduction, and green building initiatives. Material Characteristics 1. Low Thermal Conductivity ▪ The fumed silica core material exhibits extremely low thermal conductivity, effectively reducing heat transfer and enhancing insulation performance. ▪ The high vacuum level of the VIP further minimizes heat conduction and convection, making its insulation performance superior to traditional insulation materials. 2. Lightweight and Thin Design ▪ Fumed Silica VIP panels are thin and lightweight, making them suitable for applications with strict space and weight requirements, such as building walls and cold chain equipment. 3. Long Lifespan and Stability ▪ Low sensitivity to external pressure ensures a long service life and resistance to environmental temperature fluctuations. ▪ Excellent sealing properties prevent moisture and air infiltration, reducing issues related to thermal expansion and contraction.

Four-Sided Sealed Shell VIP is a groundbreaking innovation designed to completely address common issues such as air leakage and expansion in traditional bag-type vacuum insulation panels (VIP). With exceptional barrier properties, aging resistance, and puncture resistance, this product offers unparalleled protection for vacuum insulation panels. Product Structure Four-Sided Sealed Shell VIP features a novel shell-type, four-side-sealed vacuum insulation panel structure, composed of a rigid base shell and high- barrier film. The rigid base shell is formed through hot stamping, with controlled corner deformation and a highly regulated manufacturing process. The sealing edge is formed on one side of the product, ensuring a regular and flat appearance. The product can be pre-designed with slots, holes, and other customizations, with dimensions tailored to the VIP core material, eliminating the issue of uneven edges found in traditional bag-type VIPs.

• Performance Advantages: Vacuum insulation panels are ultra-thin, high- performance thermal insulation materials with insulation efficiency up to 20 times higher than conventional materials. • Applications: Suitable for household appliances, temperature-controlled packaging, cold chain transportation systems, and any other applications requiring reduced thermal energy transfer losses, offering energy efficiency and space savings. • Environmental Features: A green and eco-friendly material that does not release ODS (ozone-depleting substances) or HCFs (hydrofluorocarbons) during production and use. The core material complies with EU RoHS and REACH standards and is recyclable. Product Structure The core structure of vacuum insulation panels consists of the following three components: • Core Material: 1. Made of glass fibers with a diameter of 6-11 microns, compliant with EU REACH and RoHS environmental standards. 2. Safer and more environmentally friendly compared to the potentially carcinogenic core materials used by many manufacturers. • Barrier Film: 1) Independently developed and produced, with an ultra-long lifespan of 15 years. 2) High barrier performance, no thermal bridging effect, ensuring stable insulation performance. 3) Superior to the 2-3 year lifespan of food-grade barrier films used by some manufacturers. • Adsorption Material: 1) Incorporates proprietary patented getters and desiccants to ensure stable performance and extend the service life of the vacuum insulation panels. 2) Most manufacturers do not use adsorption materials, resulting in unstable performance and shorter lifespans.

Thick XPS Foam Wallboard/panel for shower wall Application: Underlayment, Waterproofing, Heating Systems, Bathroom Shower, Roof, Exterior Walls, Pools, Outdoor Structures Etc. XPS Foam Wall board/panelTile Backer Cement Multiboard Waterproof For Wet Room and Tiles 10mm 0.72m2Thermal Insulation Board for Walls & FloorsTile Backer Board 6mm 10mm 20mm 1200x600mm Insulation boards Wet Room Advantages 1. impact resistant and rigid. 2. Waterproof and temperature resistant & Vapour retardant. 3. Thermally insulating.           4. Quick and easy to install. 5. Lightweight, easy to handle and transport. 6. Easy to cut (with a utility knife). 7. Applied to use on any kind of background substrate. 8. Applied to freestanding partition walls,shelves, coverings and similar surfaces.  Applications Bathroo , ms and Showers: Perfect for walls and floors in showers and bathrooms where water exposure is constant. Kitchens: Ideal for kitchen backsplashes and countertops, providing a moisture- resistant base. Wet Rooms: Suitable for creating fully waterproof wet rooms with tiled surfaces. Exterior Spaces: Can be used in outdoor areas where moisture and temperature changes are a concern. 

Minimum Order: 100