Other Machinery & Parts

Main application:This machine is a single-press type, continuous automatic tablet press for pressing granular raw materials into tablets. It is mainly used in pharmaceutical industry and also the chemical, food, electronic, plastic and metallurgical industries. Feature: 1.This machine integrates automatic rotation, frequency-conversion, speed- adjusting with continuous tablet-pressing. It is mainly used for the manufacture of tablet in pharmaceutical continuous; it also applies to press the granular material into tablet in the industry of chemical, food, electronic etc. 2. This machine applies to the pressing of granular material of which powder content(over100 hole) is below 10% and it can’t be used for the pressing of half solid, damp granular. Low melting point, easy damping material and the powder without granulator. 3. This machine can produce round, special-shaped and character-engraved tablets ￠5—20mm. 4. Add forced feeder on, solve materials loading problem.

This toothed earth rock drilling bucket has the following advantages The manufacturing material is high-strength manganese steel, and the can body is more solid and durable The cylinder has two specifications: straight cylinder and conical cylinder The outer diameter of the drill bit is welded with high-strength wear-resistant welding wire, which can prolong the service life. For detailed product parameters and models of soil and rock drill bucket, please consult the customer service department.

ISUZU 6WG1 Direct injection high pressure pump Product Description Part Number - Name Direct injection high pressure pump​ Brand ISUZU Model 6WG1 Standard Yes Warranty 3 months MOQ 1 Delivery Time 1-3 days State of health Brand new & old package Wooden box

Yokohama pneumatic fender is an upgraded product of boat fender widely used worldwide, which is filled with high pressure air to withstand berthing impacts. Compared with normal elastic rubber fenders (such as waste tires, solid rubber fenders, etc.), it has high guaranteed energy absorption, low surface impact, combining high abrasion resistance with low friction and quick installation. Since its application, pneumatic rubber fender has been used as a buffer due to its high performance, and it has been widely used in ship-to-ship operation and ship-to-jetty operation.

Poduct Specification: Brand Name SIEMENS SIPLACE PCB CAMERA Part number 00344065 Model 00344065 Warranty 1 month Type SIEMENS Spare Parts Guarantee 100% Tested In Machine Confirmation Delivery Methods Ocean, Air Transport Delivery Terms Ex-works Payment Terms Pay In Advance Services Supply original new or used and repair service

Equipment function The crimping time can be set. When the crimping times reach the limit, the crimping machine will alarm automatically It can control the crimping times of mould, core wire, upper knife, lower knife and cutting knife simultaneously It can match with the mold serial number, the site can not clear zero, in case of deletion, incorrect memory, missing data The date of blade replacement, the replacement person and the content of spot inspection and maintenance can be recorded and traced Save in the form of Excel, which is convenient for future query.

Product Description SNR-QL4 3080 Servo Motor Cnc Plasma Oxyfuel Cutting Machine Kit 1. The overall processing machine base; good stability, not deformed; high accuracy; Modularization design, such as disassembly crossed beam, combined center unit, special crossed beam trunkings and humanity operate interface. 2. Using CNC of Beijing starfire Control system SF-2300 3. High reliability, such as anti-plasma jamming, and lighting strike, surge; 4. In both English and Chinese interface conversion; 5.Using USB Flash Drive reading procedure and timely upgrade software; 6.Built-in the rich graphics, makes programing easy to learn. Product data Product Name CNC profile cutting machine Cutting size 2000*6000mm Cutting mode plasma+flame CNC control system Starfire SF-2300S or Fangling F2300B THC XPTHC-400-PT auto torch height control for plasma Motor Servo motor & driver Voltage AC220±10v 50Hz Rated Power 1000W Drive mode dual drive cutting thickness (plasma) 2-30mm, depends on plasma source Cutting thickness(flame) 6-120mm Guide rail 24KG steel rail Software FastCAM STD version Package Wooden case

Introduction: The SCFE machine can effectively extract CBD from Cannabis. Green & environmentally friendly extraction process. Excellent product quality. Features: 1,No use of organic solvent, no pollution of extracts. 2,Operation at low temperature, no damage to natural active components. 3,No discharge of solid waste, waste gas or waste water. 4,High selectivity of extracts, high concentration of components. 5,Easy separation of CO2 from extracts. Products Description: 1, The SCFE technology is widely used in pharmaceutical, cosmetics, food, health products, new materials and other fields. 2, The SCFE machine is a high-pressure systematic device which changes the CO2 between liquid, supercritical state and gas for extraction and separation of materials and for process of system circulation.CO2 can be recycled and reused. 3, The extractor adopts pneumatic and electric quick opening structure, which is stable and clean. 4, The max-working extraction pressure of the equipment is 320bar, max-working extraction temperature is 70℃,and the effective volume of the material barrel is 100L. 5, The rubber and plastic foam material are used on all pressure vessels and pressure pipes to preserve heat. The outermost layer is wrapped with stainless steel skin to ensure the beauty of the equipment. 6, The machine is controlled remotely and automatically by PLC.

4000bph Full-Auto Carbonated Soft Drinking Liquid Bottle Filling Capping Machine Gas Energy Drink Machine Description 1) Rinser / filler / capper monobloc 2) Bottle material: PET, glass, metal 3) Bottle volume: 150ml - 2.5L 4) Production capacity: 50 - 22,000bottles/h 5) Can design according to customers' demands 6) We can supply filling line solution and filling machines for soft drinks (carbonated drinks) Technical Parameters Of Auto Carbonated Soda Water Filling Machine : Model (BCGF) 18/18/6 24/24/6 32/32/8 40/40/1 , 2 50/50/12 Washing heads 18 24 32 40 50 Filling heads 18 24 32 40 50 Capping heads 6 6 8 12 12 Capacity (BPH) 3500 5000 8000 12000 16000 Power(kw) 3.5 4.5 6 7.5 9.5 Dim , ension (mm) 2600*1920 3100*2300 3800*2500 460 , 0*2800 5450*3300 *2550 *2800 *2900 *2900 *2900 Weight(kg) 3500 4500 5600 850 , 0 9800

1. Brief Description Glass melting is the most important process in glass production, it is a forming process where the batched materials form a qualified liquid evenly with no bubbles under high temperature heating. Glass furnace is a melting device, which is the most necessary and important equipment for the glass industry. The melting process is divided into five stages as following, each section has its inner connection, affecting each other. If one stage has imperfect performance, it will influence the next stage, and ultimately affect the quality of glass.

The wall panel roll forming machine, applying alloyed steel and surface hard chrome coating as forming roller, to make perfect and strong panel. The product is used to be as steel construction or residence house wall and roof, or decoration. This type machine can be designed to make hidden joint, cover joint. The Sandwich Panel Production Line is composed of four (4) main sections, such as, UNCOILER MACHINE, ROLL FORMING MACHINE, LAMINATING MACHINE & CUTTING MACHINE . The production line is 27000mm x 2800mm x 2350mm. The overall weight is approximately 26 metric tons. UNCOILER MACHINE: Type of Uncoiler: Manual Material of coil: galvanized pre-painted steel coil Thickness of sheet: 0.3mm-0.6mm Width of coil: 1200mm Weight of coil: ≤ 5 mt

RS-D 7 1/16"-3,000psi Annular BOP (With spherical rubber) RS-D 7 1/16"-3,000psi Annular BOP (With spherical rubber) Specificaion Model 7 1/16"-3,000psi Annular BOP FH18-21 Part Number (P/N) RS 11827 Bore Size 179.4 mm(7 1/16") Rated Working Pressure 21MPa(3,000psi) Hydrostatic Shell Test Pressure 31.1MPa(4,500psi) Operating Chamber Rated Working Pressure 14MPa(2,000psi) Strength Working Pressure of Hydraulic Control System 21MPa(3,000psi) Recommended Hydraulic Contrlo Working Pressure for Closed Pipe String ≤10.5 MPa(≤1,500psi) Volume to Open Chamber 15L(3.92gal) Volume to Open Chamber 21L(5.55gal) Closure Range 0~179.4mm (0~7 1/16") Hydraulic Connection Ports NPT1 Temperatue Rating T-20/250(-29~121℃)or as required by contract Overall Dimension (O.D×Height) 745mm×769mm(29.33"×30.28") Approx Weight 1432kg(3157lb) 1.All BOPs are designed and manufactured in accordance with API Spec 16A. 2.The resistance to stress corrosion by Hydrogen Sulphide at BOP position in contact with fluid in the well meets relevant requirments as specified in NACE MR 0175.

YPG series pressure-spray granulating and drying machines can spray-granulate size mixture with high content of solid under pressure and dry it into globular grain product. Dried powder having a good fluidity will quickly fully fill in mold in a homogeneous way, keeping a constant content of residual water and looseness. The powder can be applied for molding products under static pressure to increase a service lifetime of mold 4-8 times in comparison with that used for mechanically granulated powder. The molded products have a good uniformity and high degree of finish, so they are widely used in the trades of porcelain bricks, tablewares ceramic wafers, ceramic materials, ferrite magnetic materials, etc. ◆ This equipment connects two functions,drying and granulating, together. The needed ball granule with certain size and ratio can be produced in accordance with requirements of process to adjust pressure, flow, and size of atomizing hole. ◆ The tower body, pipes and separator of the set where would contact the products are made of AISISUS304 or AISISUS304L or AISISUS316L or AISISUS316. There is a safe heat-preservation layer between inner and outer cases of the drying tower body. The filled material is fine glass cotton. The tower body is also equipped with observation door, sight glass, lamp-house, control meters and instruments that is controlled and displayed through electric control panel.

Stock in Korea Japan Professional SMT Line LED Mounting Machine SMD Pick and Place Machine smd led machine with Guide The rapid development of Electronic Science and technology is inseparable from the innovation of the technology of electronic manufacturing and processing equipment,Designed to continuously reduce labor costs and improve productivity,Whether their own products or processing SMES can meet their needs,Gradually moving into the ranks of high speed and ultra high speed patch machines.Full automatic 8 heads pick and place machine The performance is stable and reliable, the software is easy to operate, and the scope of the mounting is wide.It is not only possible Stable and accurate mounting Common 0201,0402,0603,0805,1206,1210,LED3528,LED5050, , diode,Triode,SOT and so on;Also added mainly the following three functions: (1)The highlight of this new device increased Professional mounting chip 500 million pixels High definition imported industrial grade calibration camera as well as 500 million pixel high- definition distortion free industrial visual lens;After technical breakthroughs to improve Can be mounted 40*40mm Within the scope 0.2mm foot spacing(0.5mm center distance) above the chip,The success rate is higher than 98%solve it completely density chip foot as well as BGA chip Difficult to install problem. (2) Added eight industrial-grade rapid recognition cameras,Eight cameras can be identified at the same time ,Greatly improve the mounting efficiency,Almost doubled on the basis of the original. (3)Increased Automatic scanning MARK point as well as Three sections Automatic Get into Conveyor plate function,Further improve the When replacing the PCB board Mount accuracy Improve production efficiency,Make the operation more convenient and simple； and can be used with other equipment generate SMT assembly line. (4)Eight head pick and place machine The core part of the upgrade is mainly embodied in software algorithm deal with,This version In the programming area made a deep level of data optimization,It is mainly embodied In the programming process Fewer and fewer operators are involved,Most of the tedious work is done to the computer.,What the operator needs to do is to follow the advice given by the software Mount Feeder. Driver Panasonic high-speed DSP driver Air Supply Requirements oil water filter,> 60L dust filter and air pressure stabilizer etc Vacuum Supply of Nozzle Japanese CKD vacuum generator integrating the high-speed vacuum burst function Range of Air Supply Pressure 0.5-0.6mp OS independent research and development SMT intelligent OS based on Windows Vision Display 17-inch industrial control display Cable German lgus durable flexible cable(10 million times) Power Supply 220V 50/60Hz Average Power 1500W Machine Dimensions 1740*1360*1440mm Weight 1100Kg