Mechanical Hardware

DIN non-rising stem resilient seatd gate valve ,型号：Z45X Usage:Making full use of the few of compensation with being out of shape when flexible disc under stress so that achieve a well sealing effectiveness,however,at that time the temperature of medium should not exceed 80︒C,it is widely applied to pipelines such as construction,food processing,chemical energy,drainage other industries. 1.Valve body/bonnet:ductile iron 2.Stem:stainless steel 3.Wedge:ductile iron+NBR/EPDM 4.Working pressure:PN10 PN16 PN25 5.Standard:DIN3352 F4

Minimum Order: 10 long tons

1.Body: ductile iron 2.Disc: ductile iron 3.Stem: SS410 4.Seat:EPDM 4.Pin: SS416 5."O" ring: NBR 6.Bushing: PTFE 8.Size:DN100-DN2400 9.Pressure:PN6-PN25 , 10.Suitable temperature:-10-80︒C 11.Pressure:PN10 PN16 PN25 13.Size:DN100-DN2000

Minimum Order: 5 dozens

Common faults: 1. Repeated prompt during startup: This situation may be caused by an obstacle sensing at the moment of startup. Turn off the power again, remove the obstacle, and then restart; It is also possible that the sensitivity of the sensor has been adjusted too high, causing the indicator light to stay on and requiring a lower adjustment 2. Poor dialogue effect and no response; Is the volume of the conversation turned off, the network poor, and the environment too noisy, 3. Not turning on: The indicator light on the switch is also off, possibly due to the fuse burning; The indicator light is on and the machine cannot be turned on. Check if the charger has burned down 4. No power storage; Need to replace battery

Minimum Order: 1 bags

TIMKEN LM48548/LM48510 Inch Taper Roller Bearing Weight 0.259 Kgs LM48548/LM48511A In Stock LM48548/10 TIMKEN Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by contact between the large end of the roller and a rib on the inner ring. This provides high capacity for radial and single thrust loads. Koyo pioneering efforts in developing crowned rollers have resulted in greater load-carrying capability and longer bearing life. Crowned rollers under load distribute stress equally along their full length of contact with the raceways, thereby eliminating stress concentration at the roller ends. This design concept also compensates for minor misalignment between shaft and housing bore and deflection under load, thereby reducing stress concentration.

Popcorn mold for footwear. The mold material is the aluminium. The maintain basic Popcorn mold life is 20K pairs per set mold (average by one year continually production). We can design and make them according to your needs. We pay attention to detail and quality. We have automated six-axis CNC production and processing, and the mold density is very good.

Minimum Order: 1 bags

Injection plastic mold (TPU mold) for footwear. The mold material is the steel. The maintain basic plastic mold life is 300K pairs per set mold (at least 5 years). We can design and make them according to your needs. We pay attention to detail and quality. We have automated six-axis CNC production and processing, and the mold density is very good.

Minimum Order: 1 bags

Injection EVA mold for footwear. The mold material is the aluminum or steel. The maintain basic IM mold life is 20K pairs per set mold (average by one year continually production). We can design and make them according to your needs. We pay attention to detail and quality. We have automated six-axis CNC production and processing, and the mold density is very good.

Minimum Order: 1 bags

Compression EVA mold for footwear. The mold material is the aluminium. The maintain basic CM mold life is 20K pairs per set mold (average by one year continually production). We can design and make them according to your needs. We pay attention to detail and quality. We have automated six-axis CNC production and processing, and the mold density is very good.

Minimum Order: 1 bags

鞋类橡胶模具。 模具材料是模具钢

Minimum Order: 1 bags

　　Crankshaft oil seals are an essential component of an engine. They are located at the front and rear of the crankshaft and are responsible for preventing oil leaks. In this article, we will discuss the importance of crankshaft oil seals, their applications, and some of the challenges associated with their use. 　　Crankshaft oil seals are crucial in preventing oil leaks. They are designed to prevent oil from escaping from the engine and entering the transmission or the environment. Oil leaks can cause damage to the engine, transmission, and other components, leading to costly repairs. Crankshaft oil seals ensure that oil is contained within the engine, keeping it running smoothly and efficiently. 　　Crankshaft oil seals are used in a wide range of applications. They are used in automotive engines, industrial machines, and marine engines. In automotive engines, crankshaft oil seals are used to prevent oil leaks from the front and rear of the engine. In industrial machines, crankshaft oil seals are used in heavy-duty applications to prevent oil leaks from the crankshaft. In marine engines, crankshaft oil seals are used to prevent seawater from entering the engine and causing damage. 　　However, there are also challenges associated with the use of crankshaft oil seals. One of the main challenges is that they can fail if they are not installed or maintained properly. For example, if a crankshaft oil seal is not installed correctly, it can be damaged during operation, leading to oil leaks. Additionally, crankshaft oil seals can be affected by temperature and pressure changes, which can cause them to expand or contract and lose their sealing properties. 　　Crankshaft oil seals are an essential component of an engine. They prevent oil leaks, ensuring that the engine runs smoothly and efficiently. They are used in a wide range of applications, including automotive engines, industrial machines, and marine engines. However, they also present challenges related to their installation and maintenance. It is important to choose the right size and material for the application and to ensure that the crankshaft oil seal is installed and maintained properly to prevent leaks and ensure the longevity of the engine.

Minimum Order: 100

We Provide Forged Piston Check Valves, 1-1/2 Inch, 800 LB, API 602, ASME B16.34, Bolted Bonnet, Regular Bore, ASTM A105N, Socket Weld End, and Piston Type. 800LB Forged Piston Check Valve, API 602, 1-1/2INCH, 800LB, SW, A105 Body, Trim 8 Valve Description: API 602 Forged Piston Check Valve Design Standard: API 602, ASME B16.34 Structure: Bolted Bonnet Nominal size: 1-1/2 Inch Nominal class: 800 LB Bore: Regular Bore End Connection: SW-Socket Weld End Operation: / Body Material: ASTM A105N Trim Material: 1Cr13+STL, No.8 Face-to-face: Manufacturer Standard Test and inspection: API 598 Key Features: Fully guided solid disc, Piston Type (Swing type available) Product Range: Body material: Carbon Steel, Stainless Steel, Duplex steel, Alloy Normal diameter: 1/2 - 2 Inch (DN15 - DN50) Pressure range: 800 - 2500 LB End connection: SW, NPT, BSP Working temperature: -29℃ - +400℃

Minimum Order: 1 bags

Dual Plate Check Valve, API 594, 6 inch, 150 LB, CF8M, Viton Seat Valve Description: Dual Plate Check Valve Design Standard: API 594 Structure: Dual Plate spring return Nominal size: 6 Inch, DN150 Nominal class: 150 LB, PN20 End Connection: Wafer-RF Operation: / Body Material: ASTM A351 CF8M Trim Material: 316 disc, X-750 Spring, Viton seat Face to face: API 594 Test and inspection: API 598 Key Features: Retainerless Design, High flow efficiency, Low noise, Short face-to- face length

Minimum Order: 1 bags

We Provide Bolted Bonnet Globe Valves, ASTM A216 WCB, BS 1873, T type, Standard Bore, Plug Disc, 8 Inch, 600 LB, DN200, PN100, OS&Y, BB, RF. Product Item: Bolted Bonnet Globe Valve Model No.: 8GL6RWCB08 Design Standard: BS 1873 Structure: Bolted Bonnet, T type, Plug Disc Nominal size: 8 Inch Nominal class: 600 LB Bore Type: Standard Bore End Connection: RF (Raised Face) Operation: Handwheel Body Material: ASTM A216 WCB Trim Material: 1Cr13+STL, No.8 Face to face: ASME B16.10 Test and inspection: API 598 Key Features: Plug Disc, OS&Y, Rising Handwheel, Low fugitive emission stem packing available, Renewable Seat, Connival Disc available

Minimum Order: 1 bags

Buy our Stainless Steel F304 Forged Gate Valve, designed as per API 602 standards with a 3/4 inch size, and 800 LB capacity. The valve features a sturdy A182 F304 body, Trim 20, and Handwheel for easy operation. Suitable for SW applications. Valve Description: 1851006 API 602 Forged Gate Valve 0.75G8SF30420 Design Standard: API 602, ASME B16.34 Structure: Bolted Bonnet, OS & Y Nominal size: 3/4 Inch Nominal class: 800 LB Bore: Regular Bore End Connection: SW-Socket Weld End Operation: Handwheel Body Material: ASTM A182 F304 Trim Material: SS304+STL, No.28 Face-to-face: Manufacturer Standard Test and inspection: API 598 Key Features: Independent backseat, Fully guided solid wedge, Adjustable Packing Gland

Minimum Order: 1 bags