Metal Products

We supply palisade steel gates as important parts for Palisade Fence System. Tubular fencing gates designed in single gate or double gates are for accessing pedestrian and motors. Like palisade fence panels, the framed gate panels can be topped with anti climbing barbed wires. Leaf types: Single leaf palisade gate Double leaf gate Pales for gate panels: D pales W pales Anti corrosion protection types: Palisade gates, hot dipped galvanized Palisade gates, galv. and powder coated pvc Applications: Double Door Motor Gate Single Security Gate Entry / entrance Gate Pedestrian Gate

Welded meshes are supplied in galvanized and powder paint/ coated finish. Weld mesh panel can be used with steel palisade to form a stronger fencing texture, a dual fencing panels with both steel bar railing and mesh partition. The mesh netting welded also makes a popular secure fencing material for airport, road, residences, prison, garrison and borders. Security Weld Mesh Panelling Weld mesh partition is used with palisade fence and many other fencing materials to provide additional anti-cutting, anti-climbing features. Normally, welded mesh of galvanized finish works with steel fencing of same finish. Zinc coated galvanized steel mesh railings The typical specifications as the following: Fence panel: Welded galvanised 3mm diameter steel wire mesh, wire mesh reinforced, 3.5m height (inclusive of topping coil diamter which should not be more than 700 mm diamter) above top of foundation, 76mm x 12.5mm aperture Fence Posts: fabricated steel posts showing clear sectional dimensions, braced or tapper locking, height of 3.5m above top foundation level Weld mesh panels for gates available. Topping Coil can be mounted above: galvanised steel barbed (blade profile) wire, high density per meter run, with fixing mechanism on steel angles/brakets, posts & fence panels, all topping coil materials complete with all accessories necessary for installation. Galvanized Wire Mesh Fence - Security Mesh Fence of Welded Panels, Posts, Toppings and Gates Galvanized wire mesh fence welded with blade profile barbed wire topping Fence panels, complete with wire meshes, posts (including extended posts 6m high, for installation of CCTV Cameras at intervals of 100 m and all accessories necessary for installation), topping and gates. Typical Specifications: Fence panel: Welded galvanized 4mm diameter steel wire mesh, wire mesh reinforced, 4m height (inclusive of topping coil diameter which should not be more than 700mm diameter) above top of foundation, 76mm x 12.5mm aperture Fence Posts: fabricated steel posts, braced or tapper locking, height of 4m above top foundation level with concrete foundation of sectional dimensions 400mm x 400mm x 700mm depth Fence gates: 8 m double leaf swing and 6 m double leaf swing, and pedestrian gates 1.2 m width, all with installation accessories. Topping Coil: Galvanized steel barbed (blade profile) wire, high density per meter run, with fixing mechanism on steel angles/brakets, posts & fence panels. All topping coil materials are complete with all accessories necessary for installation.

Razor spike tapes are fixed to the top rails of steel fencing, used to prevent climbing and bird perching. Security spikes can be installed with following fence panels and gates: Welded mesh fence; Palisade; Chain link mesh fence; Expanded metal fence. Materials: Stainless steel 430, 304 Hot dipped galvanized steel Galv. and coated. Blade type: Short blade, medium blade and long blade. Features Multi dimensional designs offering superior excellent physical and psychological fencing and safety systems; Anti climbing razors heavily ribbed; Hot dip galvanized finish against corrosion; Easy to install; No maintenance. Fencing Spike StripsHot Dip Galvanized Security Spikes for anti climbing fencing tops Razor spike strips, hot dip galvanized finish, with a 2mm plate thickness and a barb length 100mm. Ribbon lengths options: 1.45 m, 1.8 m, 2.0m, 2.5m, custom size. Steel Palisade Fence with Razor Spike Tops Hot Dipped Galvanized for High Security Fencing Uses Steel palisade fence with galvanized or stainless steel razor spikes mounted on top rails is commonly used for security perimeter and borders. Standard palisade fence system with razor spikes top provides a higher level of safety barrier. Customized sizes are supplied upon requests. Popular combination is palisade 3mm thick pales, 65mm x 2350 mm long spear post or trident top, with gi steel razor spikes 2mm x 100mm x1.45m tape length.

Supply of single spiral razor wire with Y fencing post black, 6', 1.8 to 2kg/mtr to fencing wholesaler in US. Single Spiral Razor Wire Hot-dipped Galvanized is a razor barbed wire installed in single coil razor wire fencing. Single Spiral Razor Wire or Concertina Razor Wire? Single spiral or coil razor wire forms a contrast with crossed / double spiral razor wire. Single spiral razor wire costs less due to less using of razor wire materials, while excerts less anti climbing effect then concertina wire. Galvanized Single Spiral Razor Wire CT-65 Size: 18" inner diameter x 50' linear length 33 loops per roll Blade Type: CT-65 Blade Thickness: 0.024" Core Wire Diameter: 0.099" Blade Length:2.56" Blade Width: 0.83" Blade Space:3.94" Package: Carton Box CBT 65 Blade Single Spiral Razor Wire Hot Dipped Galvanized Steel We also supply other blade sizes of single spiral razor wire. Single Coil Razor Barbed Tape Form: Single coil Razor barbed tape in single spiral 500mm Diameter Coil Blade: BTO 22

Concertina Razor Barbed Wire Hot Dipped Galvanized Concertina Razor Barbed Wire is a crossed razor wire clipped into concertina style offering maximum anti-climbing and frightening effects. When mounted on fencing panels, concertina razor barbed wire ( simplified as concertina wire) enhances the strength of the security fencing. Y post is mostly installed with the fencing panel to support the concertina razor barbed wire. Concertina Razor Barbed Wire, Hot Dipped Galvanized Hot dipped galvanized concertina razor barbed wire Material: Galvanized Height / diameter: 700mm Length / diameter: 700mm Length: 10m per coil Blade specification: BTO 22 Type: Cross type razor barbed wire Barbed wire diameter 45 cm 5 rolls per pack / each roll 7 kilos 5 rolls: 35 kilos 200 packs x 35 kilos 304 and 316 SS Concertina Wire Coils Stainless steel concertina wire coils, with stainless steel core Coil Diameter: 30 inch 56 spirals per coil Clips: 3 Coil length: 50 feet Material: High tensile stainless steel 304 core wire

STRANDED BARBED WIRE, RAZOR BARB WIRE AND CONCERTINA Security barbed wire is supplied in three forms: Twisted barb wire, razor barbed wire and concertina barbed wire. Barbed wire and spikes are all mounted along top rails of fencing panels for high level of security purposes. Stranded Barbed Wire Materials: Electro-galvanized Hot dipped galvanized Plastic coated galvanised steel Main types: Single barbed wire or single strand barbed wire Hot Dip galvanized steel barbed wire, HDG Galv. Reverse twisted galvanized barbed wire Double strand barbed wire, electro-galvanised and zinc galv. Typical size: Wire gauge: BWG14 Barb distance:12.5 cm Barb length: 1.8 cm Finish: HDG hot zinc plate (zn) Strand: Double

Typical high security palisade fencing system has the following: Steel palisade panels; Steel palisade gates; Top rail security spikes; and / or Razor flat wrap; and / or Razor coil. All material shall be hot dip galvanised to SABS/ISO 1461. Triple Pointed and Splayed Palisade Fence with Razor Wire for High Security Applications Steel Palisade Panels The palisade panels are constructed with triple pointed or spear top posts, top rails, razor spikes, bottom rails and accessories. Modular W section steel palisade panels of pales, posts, rails Modular palisade fence panel with frame post, bottom rail and top rail bolt fixing Spear top fence panels of pales, posts and rails Modular palisade panel fixed with horizontal rails bolted at medium position of the panel height Tubular Fencing Posts Corner posts must be installed at a 45 deg angle. Two 40 x 40mm taps with a 14mm hole must be welded, at 45 deg, 860mm from the bottom and 2700mm from the bottom on the inside flange of the corner post. Four M 12 x 40 mm bolts with hex nuts and washers must be used to secure the panels to the post. A 40 x 40 mm tap with a 14mm hole must be welded 525mm from the bottom, on the inside flange of the corner post, for the earth tail connection. There will be occasions when the Posts will be surface mounted and in these instances the Post shall be only 2400mm long having a 200mm x 200mm x 6mm Base Plate fully welded to the Post. The Base plate shall have Four 14mm Diameter holes positioned at 140mm centres at each corner of the Base Plate. The Post shall be secured by means of Four 12mm Stainless Steel Chemical Anchors. Palisade Panels.(Refer to figure 6) Three normal panel sizes options: 825 x 2350 mm, 1200 x 2350 mm and 2100 x 2350 panels. Fittings for fixing the panels: hot dip galvanised cap square bolts, hex nuts and washers, stainless cap square bolts and hex nuts and washers. Top Rails. (Refer to figure 6) Material: 50mm x 50mm x 5mm angle iron. At the end of the rail a 13mm hole must be drilled through the centre for M12 mounting bolts. Razor spikes must be fitted to top rails by means of 6 mm pre-drilled holes (before galvanising) and secured with 4.8 mm full stainless steel pop rivets. Top Rail Security Spikes. Industrial standard high security spikes shall be used.

We produce steel wire mesh in China for 20 years. Please feel free to contact me.

Minimum Order: 1 bags

Concrete Reinforcing Mesh Essential For Construction Projects Concrete reinforcing mesh, also known as reinforcing welded mesh, is made of carbon steel or stainless steel and comes in rectangular and square shapes. Its strong structure and high tensile strength improve its bond with concrete and reduce cracking. This mesh is commonly used to reinforce building foundations, roads, and bridge decks. Reinforcing bar supports and tie wires are essential for securing the mesh in concrete structures. Concrete Reinforcing Mesh Concrete reinforcing mesh is made from metal rods ranging from 3 mm to 40 mm in diameter, bonded perpendicularly by spot welding for strong connections. This versatile mesh is used in various construction projects, including concrete footpaths, industrial and commercial slabs, precast panels, and residential foundations. It typically features ribbed steel rods to improve concrete bonding and minimize cracking. Smooth steel mesh is also available for specific project needs.

Welded Mesh Gabions For Erosion Control & Landscaping Rentai Wire Mesh Products Co., Ltd. offers a comprehensive range of welded mesh gabions, made from welded steel wire mesh available in galvanized, PVC-coated, and Galfan-coated finishes. These gabions are durable and suitable for various environmental conditions. Available in multiple wire diameters, dimensions, and unit sizes, they are tailored to meet specific project needs. Ideal for gravity retaining walls, architectural cladding, barriers, erosion control, landscaping, and infrastructure projects, Rentai's gabions provide both structural integrity and aesthetic value. Welded Mesh Gabions Welded mesh gabions are made from cold-drawn steel wire that is electrically welded together. The wire is available in stainless steel, hot-dip galvanized, or Alu-Zinc coated options to ensure durability. Additionally, the meshes can be polymer-coated to protect against corrosion and weathering effects, particularly in salty and highly polluted environments.

Buy Stainless Steel Welded Wire Mesh - Direct From Manufacturer Rentai Wire Mesh Products Co., Ltd. produces and exports a wide range of stainless steel welded wire mesh to suit various industrial, agricultural, and residential needs. Known for its strength, durability, and corrosion resistance, this mesh is ideal for diverse applications including construction, security fencing, and architectural uses. It is available in various mesh sizes, wire diameters, and panel dimensions, customizable to specific requirements. The mesh is not only robust but also versatile, commonly used in machine guards, animal enclosures, support structures, and ventilation grilles. Stainless Steel Welded Wire Mesh Stainless steel welded wire mesh is renowned for its durability and inherent resistance to environmental challenges. This mesh, crafted from stainless steel, does not require additional coatings such as galvanizing or PVC to prolong its life. It is naturally resistant to rust, corrosion, and harsh chemicals, making it ideal for demanding settings. Specifically, Type 316 stainless steel mesh is optimal for saltwater environments due to its enhanced corrosion resistance compared to Type 304, ensuring reliability in marine applications and other areas with significant exposure to corrosive elements.

Hot-Dipped Galvanized Mesh Rolls And Panels For Every Need Rentai Wire Mesh Products Co., Ltd. produces Hot-Dipped Galvanized Welded Wire Mesh, designed for durability and corrosion resistance, catering to industrial, agricultural, and residential needs. The mesh is submerged in molten zinc after welding, which coats every joint and intersection thoroughly. This hot-dip galvanizing process provides superior rust protection and increases the mesh's lifespan, especially in harsh environments. It's ideal for outdoor structures like fences and safety barriers, enhancing resistance to moisture and corrosives, and is strong enough for heavy-duty applications. Available in various wire diameters, mesh sizes, and dimensions, Rentai's Hot-Dipped Galvanized Welded Wire Mesh is versatile for uses ranging from security fencing to agriculture, offering long-lasting security and durability across many applications.

Electro Galvanized Welded Wire Mesh Perfect Blend Of Durability And Affordability Rentai Wire Mesh Products Co., Ltd. specializes in producing and exporting Electro Galvanized Welded Wire Mesh, providing a diverse range of types and specifications to suit various industrial needs. This welded wire mesh undergoes an electro galvanization process where low carbon steel wire is first welded into a mesh and then electro galvanized. This method ensures a uniform zinc coating, enhancing the mesh’s resistance to corrosion and extending its lifespan. The robust structure and even surface of the product make it ideal for multiple uses such as fencing, infrastructure projects, and other structural applications. Its corrosion-resistant properties offer an economical alternative to stainless steel, while maintaining excellent durability and strength.

Chain link fence is also called diamond wire mesh, it is a type of woven fence which is usually made from galvanized or PVC-coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence. Chain Link Fence is normally used for protecting fencing and security fencing on playground, construction site, highway side, courtyard, public place, places of recreation and so on. Product Type: (1) Electro galv. Chain link fence (2) Hot dipped galv. Chain link fence (3) PVC coated Chain link fence (4) Stainless Steel Chain link fence Wire diameter:2.0-4.0mm Roll width: 1.0-2.4m Mesh opening: 40*40mm --- 80*80mm