Iron Wire Mesh

A ring groove rivet is a high-strength fastening connector consisting of two parts: a rivet shank and a collar. The surface of the rivet shank is equipped with annular grooves, and the collar is sleeved on the grooved section of the rivet shank. Size Diameter (length) M16, M20, M24, M28, M32, M36, M44 Material 20MnTiB  Application This connection method features strong vibration resistance, high shear resistance, and no risk of loosening after installation. Working Principle During installation, a special tool applies axial pressure to the collar, causing it to undergo plastic deformation and tightly embed into the ring grooves of the rivet shank, forming a firm mechanical locking structure.This connection method features strong vibration resistance, high shear resistance, and no risk of loosening after installation.

Torque-shear bolt is also well known for torsional shear bolt, is a specialized high-strength fastener designed for critical structural connections. Its external feature is that the bolt head is cup head, and at the end of the rod, there is a plum blossom-shaped "breaking groove" (i.e., the torque control section), which is used in conjunction with the matching torque- shear type nuts and washers. Specification Standard GB3632 JSS II 09 Size Diameter (length) M16(40-150) M20(45-180) M22(50-200) M24(50- 200) M27(65-200) M30(80-200) Material 20MnTiB 35VB nut  material-size 35K-Diameter24 35K-Diameter28/30 35K-Diameter34 35K-Diameter34/36 45#-Diameter38 45#-Diameter42 washer  material-size 45#-Thickness3.55 45#-Thickness3.55 45#- Thickness4.55/4.6 45#-Thickness4.55/4.6 45#-Thickness4.55/4.6 45#- Thickness4.55/4.6 Surface treatment black oxide Grade 10.9 Production process Raw materials entering the factory - drawing - cold heading  -Heat treatment- inspection - packaging Package 30kg/ctn Remarks The tensile strength is more than 1000mpa

Steel structure large hexagon bolts are high-strength fasteners specifically designed for steel structure connections. They typically consist of a bolt shank, a hexagonal head, and a fully threaded or partially threaded section. The head features a standard hexagonal design. Ordinary wrenches or socket tools are allowed for installation. Specification Standard GB1228 A325 A490 Size Diameter (length) M16(40-150) M20(45-170) M22(50-200) M24(55- 200) M27(65-200) M30(80-200) Material 20MnTiB 35VB Nut  material-size 35K-Diameter24 35K-Diameter28/30 35K-Diameter34 35K-Diameter34/36 45#-Diameter38 45#-Diameter42 washer  material-size 45#-Thickness3.55 45#-Thickness3.55 45#- Thickness4.55/4.6 45#-Thickness4.55/4.6 45#-Thickness4.55/4.6 45#- Thickness4.55/4.6 Surface treatment black oxide Grade 10.9 Production process Raw materials entering the factory - drawing - cold heading  -Heat treatment- inspection - packaging Package 30kg/ctn

Shear stud is a type of fastener specifically designed for welding connections in steel structures, typically made of low-carbon steel or low-alloy steel. It is cylindrical in shape, with a nail head at one end and a welding end at the other (mostly flat or with an arc initiation structure). Specification Standard GB10433 ISO13918 AWSD1.1-1.4 Size Diam , eter (length) M10,M13(40-120) M16(40-150) M19(40-210) M , 22,M25(70-225) Material Q195 ML15 SWRCH18A Surface treatment phosphating Production process Raw materials entering the factory - phosphating - drawing - cold heading - riveting - inspection - packaging Package 25kg/box or bag Remarks ML15:The tensile strength is more than 350mpa,the yield strength is more than 230mpa SWRCH18A:The tensile strength is more than 450mpa,the yield strength is more than 350mpa

Hot-Dipped Galvanized Mesh Rolls And Panels For Every Need Rentai Wire Mesh Products Co., Ltd. produces Hot-Dipped Galvanized Welded Wire Mesh, designed for durability and corrosion resistance, catering to industrial, agricultural, and residential needs. The mesh is submerged in molten zinc after welding, which coats every joint and intersection thoroughly. This hot-dip galvanizing process provides superior rust protection and increases the mesh's lifespan, especially in harsh environments. It's ideal for outdoor structures like fences and safety barriers, enhancing resistance to moisture and corrosives, and is strong enough for heavy-duty applications. Available in various wire diameters, mesh sizes, and dimensions, Rentai's Hot-Dipped Galvanized Welded Wire Mesh is versatile for uses ranging from security fencing to agriculture, offering long-lasting security and durability across many applications.

Electro Galvanized Welded Wire Mesh Perfect Blend Of Durability And Affordability Rentai Wire Mesh Products Co., Ltd. specializes in producing and exporting Electro Galvanized Welded Wire Mesh, providing a diverse range of types and specifications to suit various industrial needs. This welded wire mesh undergoes an electro galvanization process where low carbon steel wire is first welded into a mesh and then electro galvanized. This method ensures a uniform zinc coating, enhancing the mesh’s resistance to corrosion and extending its lifespan. The robust structure and even surface of the product make it ideal for multiple uses such as fencing, infrastructure projects, and other structural applications. Its corrosion-resistant properties offer an economical alternative to stainless steel, while maintaining excellent durability and strength.

Filter raschig rings and wire mesh demisters are used to separate droplets or solid particles from a gas stream. The device consists of several rings of low resistance, rasched-ring style wire mesh stacked together. The size, length, and width depend on the application and the gas flow conditions. Generally speaking, the size and length of the demister can range from 3 to 40 inches. The width of the demister typically ranges from 0.5 to 10 inches. Filter raschig rings and wire mesh demisters are two types of equipment used in filtration processes. Filter raschig rings, are cylindrical pieces that fit over a liquid filter to provide support and form a seal. This ensures a tight fit, which helps prevent liquid leakage. Wire mesh demisters are made of a woven mesh that is wrapped around a filter's circumference to help remove solid particles from a liquid. They work by generating small amounts of turbulence that trap the particles, while allowing the liquid to pass through unimpeded. In order to ensure proper functioning, the size of the mesh should be such that it can effectively capture the particles that need to be removed.

Knitted Wire Mesh Demister Pad is a popular filter element used in fertilizer factories for absorbing tower and drying tower. The demister element is produced with AISI 316 stainless steel demister grids and PTFE/Hostaflon or equivalent mesh pad material. Demister Pads For SULFURIC ACID PLANT / FERTILIZER FACTORIES Demister Element For Absorbing Tower (Lower) No. Of Parts: 6(six) Pad Diameter: 2300 mm Demister Mesh Pad Material: Hostaflon Pad height: 100 mm Demister Grids material: AISI 316L Height including grids: 150 mm Mesh Pad Density: 225 kg/m3 Wire diameter: 0.5 mm to 0.1 mm Allowable max. temperature: 180 °C

Demister pads for boilers of sugar mills are designed with high temperature resistance, chemical inertness and excellent filtration efficiency. Demister Pad for Sugar Factory Diameter of demister pad 2000 mm Thickness of pad: approx 150 mm ( 6 inch ) Density of pad: 80 kg/m3 Material : SUS 304 For 2 bodies of 1st effect quintuple effect evaporator of Diameter 5500 mm and ht above calandria 8000 mm SPECIFICATION OF Demister Pads FOR 1x40 T/Hr BOILER OF SUGAR MILLS DESIGN PARAMETERS: To be installed in boiler steam drum for separating the water droplets from saturated steam. Steam flow rate: 40 ton/hr. (Normal) Operating pressure: 44-45 Kg/cm2 Operating temperature: 265 °C Liquid density: 788 Kg/M3 Vapour density: 22.7 Kg/M3

Filter raschig rings and wire mesh demisters are used to separate droplets or solid particles from a gas stream. The device consists of several rings of low resistance, rasched-ring style wire mesh stacked together. The size, length, and width depend on the application and the gas flow conditions. Size and length of the demister can range from 3 to 40 inches. The width of the demister typically ranges from 0.5 to 10 inches. Filter raschig rings are cylindrical pieces that fit over a liquid filter to provide support and form a seal. This ensures a tight fit, which helps prevent liquid leakage. Wire mesh demisters are made of a woven net that is wrapped around a filter's circumference to help remove solid particles from a liquid. They work by generating small amounts of turbulence that trap the particles, while allowing the liquid to pass through unimpeded. In order to ensure proper functioning, the size of the mesh should be such that it can effectively capture the particles that need to be removed.

High permeability demister pads are used in a wide range of applications, including air conditioning, chemical processing, and oil-water separations. The process for production involves the use of advanced equipment and methods to create the right size and shape of product in order to ensure the highest degree of performance. High permeability demister pads are used in a variety of industries and applications. In air conditioning, they are used to minimize water vapor condensate, while in chemical processing they are used to separate solid particles from liquids. Additionally, they are used in oil-water separations to improve the efficiency of systems. The permeability of demister pads is determined by the size of the openings in the material, as well as the density of the weave. The larger the size and density of the weave, the more efficient the separation will be. Additionally, the thickness of the material is a key factor in determining permeability as well. It is important to choose the right material and mesh size to ensure optimal efficiency.

Strainer demister pads are used to ensure that liquids and gases flow freely through the strainer. This filter element is made from mesh materials designed with a specific pore size and mesh opening size. Depending on the application, the mesh material ranges from steel, stainless steel, PVC, Polypropylene to other synthetic materials. Strainer demisters provide a higher level of removal efficiency than traditional demisters, including removing smaller particles from the process stream. The pad is designed with a high collection efficiency for droplet and aerosol removal, even when the process gas carries entrained liquid particles. This type of pad is particularly suitable for aggressive service applications. Applications Strainer demister pads are usually used in high-temperature and pressure applications, such as refineries, power stations, chemical plants, fertilizer manufacturing and petrochemical plants. They are also used in processes including amines, LPG, steam and boilers, cryogenics, air separation, and other related operations.

Vessel demisters are devices primarily used in high-pressure gas vessels and towers in power plants, chemical plants, refineries, and various other industrial processes. Vessel demister pads are an integral part of any process vessel, storage tank, and reactor system. Their unique design enables them to capture and contain the entrained droplets in the vapor stream and reduce contaminated vapors for clean air release. Material The material used in vessel demisters is typically constructed of wire mesh, polymers, metal, elements. Commonly used materials include polypropylene, polyethylene, stainless steel, zinc-plated steel, brass, and PVC. These materials can be selected based on their chemical, temperature, and corrosion resistance capabilities. Sizes and Shapes Vessel demister pads come in a wide range of sizes and configurations, including round pads, wedge wire pads, and various other shapes. The size and shape of a vessel demister usually depend on the size and shape of the equipment it will be installed in. Generally, the demisters are designed to fit within the vessel or tower that they are intended for. The length and width of a vessel demister depend on the size and configuration of the job.

Distiller Demister Pads are an essential component of distillation columns used to reduce the amount of entrained liquids and droplet entrainment in the filtration system. Sizes and Materials Distiller mesh demisters are available in a range of sizes, colors, materials, and shapes according to the application and the pressure drop desired in the system. The size also influences the contact surface area, efficiency, and overall performance of the pad. These pads typically range from 3/8" up to 48". The width can range from 12" up to 60" depending on the required surface area. Colors most offer standard grey, black, and white for easy system identification. The materials used for distiller demister pads include metallic stainless steel, fiberglass, polypropylene, and other synthetic fibers. Each material has its own distinct characteristics such as flexibility, chemical resistance, durability, and permeability. The length of the pad can vary depending on the application and desired shape. It is important to have an even distribution of mesh fibers throughout the entire length of the pad, which provides uniformity and better performance when compared to pads with irregular fiber distribution.