Metal Products

Wire mesh cable tray is used for routing low voltage cables, telecommunication cables, data cables, and fiber optic cables on short spans. It is made from welded steel wire mesh with an open basket structure. The open design helps cable ventilation and makes cable checking easier during installation and maintenance. Standard length is 3000 mm. Common mesh pitch is 100 x 50 mm, and 50 x 50 mm can be made by order. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Wire Mesh Cable Tray is used for routing low voltage cables, telecommunication cables, data cables, and fiber optic cables on short spans. It is made from welded steel wire mesh with an open basket structure. The open design helps cable ventilation and makes cable checking easier during installation and maintenance. Standard length is 3000 mm. Common mesh pitch is 100 x 50 mm, and 50 x 50 mm can be made by order. Surface finish can be electro zinc plated, hot dipped galvanized, powder coated, pre-galvanized, or stainless steel electropolished. Width, height, wire diameter, finish, accessories, and packing should be confirmed by project requirement. Specifications Product Name: Wire Mesh Cable Tray, wire basket cable tray, welded wire cable tray Material: Carbon steel wire or stainless steel wire by order Structure: Welded steel wire mesh, open basket type Standard Length: 3000 mm Mesh Pitch: 100 x 50 mm as common pitch; 50 x 50 mm available by order Width: According to project requirement Height: According to project requirement Wire Diameter: According to tray size and load requirement Surface Finish: Electro zinc plated, hot dipped galvanized, powder coated, pre- galvanized Z300, or stainless steel electropolished Electro Zinc Plated: For indoor use, reference BS EN 12329-2000, approx. 12 microns when required Hot Dipped Galvanized: For outdoor use, reference BS EN 1461-1999, commonly 60- 80 microns when required Powder Coated: Mainly for indoor use. Color and coating thickness should be confirmed by order Pre-Galvanized: Z300 coating can be checked according to order Stainless Steel Finish: Electropolishing available for stainless steel trays Accessories: Hold down saddle, joiner clamp set, wall bracket, hanging bracket, support, bolt and nut set Packing: Iron pallet or export pallet packing Use Note: Load capacity and support span should be checked according to tray size, wire diameter, cable weight, and installation method.

Steel grating is used for platforms, walkways, stair treads, trench covers, drainage covers, bridge side paths, and industrial flooring. It is made from bearing flat bars and cross bars by pressure welding or press locking. Common materials include Q235 low carbon steel, galvanized steel, and stainless steel. Alloy steel can be checked by order. Surface can be plain, serrated, or I-bar type. The most widely used finish is hot dipped galvanized for outdoor and humid environments. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Steel Grating is used for platforms, walkways, stair treads, trench covers, drainage covers, bridge side paths, and industrial flooring. It is made from bearing flat bars and cross bars by pressure welding or press locking. Common materials include Q235 low carbon steel, galvanized steel, and stainless steel. Alloy steel can be checked by order. Surface can be plain, serrated, or I-bar type (I-bar available by order). Hot dipped galvanized finish is often used for outdoor projects. Panel size, bearing bar size, bar spacing, cross bar spacing, surface type, finish, and edge banding should be confirmed according to span and load requirement. Specifications Product Name: Steel Grating, welded steel grating, galvanized steel grating Material: Q235 low carbon steel, galvanized steel, stainless steel, or alloy steel by order Bearing Bar: Flat steel bar Common Bearing Bar Size: 20 x 3 mm, 25 x 3 mm, 32 x 3 mm, 40 x 3 mm, 20 x 5 mm, 25 x 5 mm, 32 x 5 mm, 40 x 5 mm, 45 x 5 mm, 50 x 5 mm, 55 x 5 mm, 60 x 5 mm Cross Bar: Round bar, twisted square bar, square bar, or hexagonal bar Common Bearing Bar Pitch: 30 mm, 40 mm, 60 mm Common Cross Bar Pitch: 50 mm or 100 mm Grating Type: Welded grating, press locked grating, dense grating, trench cover, stair tread Surface Type: Plain surface, serrated surface, or I-bar type by order Finish Treatment: Hot dipped galvanized, electro galvanized, painted, anti-rust oil, or black untreated surface by request Code Reference: Example: G325/30/100 usually means 32 x 5 mm bearing bar, 30 mm bearing bar pitch, and 100 mm cross bar pitch. Some codes may vary by market, so drawing confirmation is recommended. Panel Size: Made according to project drawing or cutting list Edge Banding: Flat bar banding available by order Use Note: Load capacity depends on bearing bar size, grating span, support condition, bar spacing, and installation method. Please confirm load and span before production.

Anti Climb Fence is made from welded steel mesh with narrow openings to reduce hand and foot hold points. It is also called 358 mesh fence, high security fence, anti-climbing fence, or anti-cutting fence. Standard 358 mesh refers to 3″ x 0.5″ opening and 8 gauge wire, equal to about 76.2 x 12.7 mm opening East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Anti Climb Fence is made from welded steel mesh with narrow openings to reduce hand and foot hold points. It is also called 358 mesh fence, high security fence, anti-climbing fence, or anti-cutting fence. Standard 358 mesh refers to 3″ x 0.5″ opening and 8 gauge wire, equal to about 76.2 x 12.7 mm opening with around 4.0 mm wire. Panels are usually made from Q235 steel wire and used with square or rectangular steel posts. Surface treatment can be hot dipped galvanized, polyester powder coated, or PVC coated by order. Specifications Product Name: Anti Climb Fence, 358 mesh fence, high security welded mesh fence Material: Q235 steel wire and steel posts Standard 358 Mesh Opening: 12.7 x 76.2 mm, also called 0.5″ x 3″ Other Mesh Opening: 25 x 75 mm or special narrow opening by order Panel Height: 1.8 m, 2.0 m, 2.4 m, 3.0 m, or made by order Panel Width: 2.0 m, 2.2 m, 3.0 m, 4.0 m Wire Diameter: 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm Post Type: Square post or rectangular post Square Post Size: 50 x 50 mm, 60 x 60 mm, 80 x 80 mm Rectangular Post Size: 40 x 60 mm, 40 x 80 mm, 60 x 80 mm, 80 x 100 mm Post Length: 2.0 m, 2.5 m, 3.0 m, or according to panel height and embedded depth requirement Post Installation: Embedded post or flanged base plate Surface Treatment: Hot dipped galvanized, galvanized plus polyester powder coated, or PVC coated by order Common Color: Green, black, grey, or RAL color by order Use Note: Small mesh opening helps reduce climbing points and makes cutting harder with common tools. Final security level depends on wire diameter, panel height, post size, clips, bolts, and installation method.

Chain link fence is woven from low-carbon steel wire into a diamond mesh. It is supplied with a galvanized or PVC-coated finish for residential boundaries, sports grounds, construction sites, and animal enclosures. The open diamond structure maintains visibility and airflow while providing a secure barrier. Mesh opening typically ranges from 25 mm to 100 mm, with steel wire diameters from 1.20 mm to 5.00 mm. Roll heights are available from 0.5 m to 5.0 m, and roll lengths from 1 m to 50 m. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Chain link fence is woven from low-carbon steel wire (Q195 or Q235 by order) into a diamond mesh. It is supplied with a galvanized or PVC-coated finish for residential boundaries, sports grounds, construction sites, and animal enclosures. The open structure maintains visibility and airflow. Mesh opening, wire diameter, and roll height can be adjusted for different fence lines. Smaller openings and heavier wire provide a stiffer fabric but also increase roll weight. Buyers should state the steel core diameter, coating type, mesh size, and edge finish when requesting a quotation. Specifications Material: Low-carbon steel wire (Q195 or Q235 by order) Mesh Opening: 25, 40, 50, 55, 60, 65, 76, or 100 mm (other sizes by order) Steel Wire Diameter: 1.20–5.00 mm Roll Height: 0.5–5.0 m Roll Length: 1–50 m Mesh Shape: Diamond opening Edge Finish: Knuckled, twisted, or knuckled and twisted Finish: Galvanized or PVC-coated PVC-Coated Wire: The steel core diameter and finished coated diameter must be stated separately. Industry specifications normally identify polymer-coated fabric by its core wire size, not its finished outside diameter. Galvanized Fabric: Zinc coating weight is supplied according to the confirmed order. “Heavy galvanized” should not be used in the contract unless the required coating weight is stated. ASTM A392 treats mesh size, wire size, fabric height, selvage, zinc coating weight, and breaking strength as separate specification items. Packing: Compacted rolls with protective wrapping. Pallet packing is available when agreed before production. Order Information: Please provide mesh opening, core wire diameter, finish, roll height, roll length, edge treatment, and required quantity.

Wire mesh fence is made from welded low-carbon steel wire (Q195 or Q235 by order). It is used for gardens, residential compounds, factories, and public facilities. The standard mesh opening is 50 × 120 mm, with panel widths of 2.0 m or 2.5 m, and heights from 0.6 m to 2.0 m. Available finishes include electro-galvanized for indoor or light outdoor use, hot-dip galvanized for long-term outdoor exposure, and PVC coated for colored visible sites. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Wire mesh fence is made from welded low-carbon steel wire (Q195 or Q235 by order). It is used for gardens, residential compounds, factories, and public facilities. The standard mesh opening is 50 × 120 mm (other openings by order). Standard panel widths are 2.0 m and 2.5 m, with heights from 0.6 m to 2.0 m (taller sizes by order). Available finishes include electro-galvanizing, hot-dip galvanizing, and PVC coating. For coated panels, the steel core is approximately 3.2 mm and the finished diameter is approximately 4.0 mm (coating thickness confirmed by order). Posts and fittings are supplied according to panel height and installation requirements. Specifications Material: Low-carbon steel wire (Q195 or Q235 by order) Production Method: Welded mesh panel Mesh Opening: 50 × 120 mm (other openings by order) Steel Core Diameter: Approximately 3.2 mm Diameter After PVC Coating: Approximately 4.0 mm (coating thickness confirmed by order) Panel Width: 2.0 m or 2.5 m Panel Height: 0.6, 0.8, 1.0, 1.2, 1.5, 1.8, or 2.0 m (taller sizes by order) Surface Options: Electro-galvanized, hot-dip galvanized, or PVC-coated End Treatment: Bent ends or straight ends (confirmed by order) Fence Posts: Supplied according to panel height and fixing method Fixings: Clips, brackets, and bolts subject to the selected post system Packing: Panels and posts packed separately. Packing details are confirmed before shipment. Important: The final wire diameter depends on coating thickness. Core diameter and finished diameter should both appear on the purchase order.

Crimped wire mesh is woven from pre-crimped carbon steel, galvanized steel, or stainless steel wire. The crimped intersections hold the wires in position and help maintain the specified opening under screening conditions. It is mainly supplied for screening stone, gravel, aggregate, coal, and other bulk materials. Lighter specifications are also used for machine guards, workshop partitions, and ventilation panels. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Crimped wire mesh is woven from pre-crimped carbon steel, galvanized steel or stainless steel wire. The crimped intersections hold the wires in position and help maintain the specified opening. It is mainly supplied for screening stone, coal, aggregate and other bulk materials. Lighter specifications are also used for machine guards and industrial partitions. Buyers should specify the clear aperture and wire diameter in millimetres. This avoids confusion between SWG, BWG and other wire-gauge systems. Specifications Materials: Carbon steel, galvanized steel or stainless steel Manufacturing Method: Wire crimped before weaving Opening: Square opening unless otherwise specified Aperture Measurement: Clear distance between two adjacent wires Specification Method: Clear aperture × wire diameter Weave: Pre-crimped woven construction Supply Form: Rolls or cut panels, depending on wire diameter and finished stiffness Dimensions: Made according to the confirmed panel or roll size Edges: Cut edges or finished edges by order Required Order Details: Material, clear aperture, wire diameter, width, length, quantity and intended application ASTM E2016 treats opening, wire diameter, weave and material as separate purchasing parameters. These items should appear individually on the order sheet. Applications Screening stone, gravel and aggregate Coal and dry bulk-material sizing Machine guards and workshop partitions Stainless steel screens for selected food-processing equipment For direct food contact, stainless steel grade, surface condition and applicable food-contact requirements must be confirmed. Carbon steel and galvanized mesh should not be presented as food-grade material.

Hexagonal wire netting is available in different mesh openings to suit different applications. Smaller openings such as 1/2" and 5/8" are used for poultry cages, small animal enclosures, and garden protection where the mesh needs to contain small birds or keep out small pests. Medium openings such as 3/4" and 1" are common choices for farm fencing, garden boundaries, and general light partition work East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Hexagonal Wire Netting is woven from low carbon steel wire, galvanized wire or PVC coated galvanized wire. It is commonly used for poultry fencing, garden protection, light partition mesh, plaster support, insulation covering and stone cage work. The mesh has a hexagonal opening and can be made with straight twist or reverse twist. For outdoor use, hot dipped galvanized and PVC coated types are more common. Light rolls are easy to cut and install. Heavy type hexagonal wire netting is used where thicker wire and better shape retention are required, such as gabion baskets and slope protection. Specifications Material: Low carbon steel wire, galvanized iron wire, PVC coated galvanized wire Mesh Opening: 1/2″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″ Wire Diameter: BWG18 to BWG25 for light type; 2.0 mm to 4.0 mm for heavy type Surface Treatment: Electro galvanized, hot dipped galvanized, galvanized before weaving, galvanized after weaving, PVC coated PVC Coating Color: Green, white, gray and other colors by order Weaving Type: Straight twist or reverse twist Edge Type: Single edge, double edge, reinforced edge Roll Width: Common width up to 2.0 m; some narrow rolls can be supplied around 4 ft Zinc Coating: Standard zinc coating depends on wire size and finish. Heavy galvanized coating can be made according to order. Wire Tensile Strength: Around 350 N/mm² can be used as a reference for common steel wire. Final value should follow confirmed material and order details. Packing: Wrapped rolls, pallet packing, or export packing according to roll size

Welded wire mesh is available in a wide range of mesh openings to suit different applications. Smaller openings from 1/4" to 3/8" are used for fine mesh applications such as small poultry cages, insect screens, and plaster support. Medium openings from 1/2" to 3/4" are common for garden fencing, rabbit cages, and light animal enclosures where the mesh needs to contain small animals. Square openings such as 1" x 1" and 1" x 2" are used for general fencing, warehouse partitions, and machine guards, providing good visibility and moderate strength. East of Weimin Street, Anping County, China sales@bxwiremesh.com +86-19134185927 +86-13184973926 WhatsApp: +86-19134185927 www.bxwiremesh.com Welded Wire Mesh is made by welding low carbon steel wire, galvanized wire or stainless steel wire at each crossing point. The mesh opening is fixed and the sheet or roll keeps a flat shape during cutting and installation. It is used for fencing, cages, machine guards, garden partitions, construction protection and general industrial use. We can supply electro galvanized, hot dipped galvanized and PVC coated welded mesh. Common roll length is 30 m. Roll width, mesh opening, wire diameter and packing can be made according to order details. Specifications Material: Low carbon steel wire, galvanized steel wire, stainless steel wire Mesh Opening: 1/4″ × 1/4″, 3/8″ × 3/8″, 1/2″ × 1/2″, 5/8″ × 5/8″, 3/4″ × 3/4″, 1″ × 1/2″, 1″ × 1″, 1″ × 2″, 1-1/2″ × 1-1/2″, 2″ × 2″, 2″ × 3″, 2″ × 4″, 3″ × 3″, 4″ × 4″ Metric Opening: 6.4 × 6.4 mm, 10.6 × 10.6 mm, 12.7 × 12.7 mm, 16 × 16 mm, 19.1 × 19.1 mm, 25.4 × 12.7 mm, 25.4 × 25.4 mm, 25.4 × 50.8 mm, 38 × 38 mm, 50.8 × 50.8 mm, 50 × 75 mm, 50 × 100 mm, 75 × 75 mm, 100 × 100 mm Wire Diameter: Common light welded mesh uses BWG24 to BWG16. Fencing mesh commonly uses about 1.65 mm to 2.67 mm wire. Heavier gauges available by order. Welding: Longitudinal and cross wires welded at the crossing points Edge Treatment: Cut edge or bent ends (confirmed by order) Surface Treatment: Electro galvanized before welding, electro galvanized after welding, hot dipped galvanized before welding, hot dipped galvanized after welding, PVC coated PVC Coated Type: Usually made from galvanized welded mesh or galvanized wire core. Finished wire diameter depends on coating thickness. Roll Width: Galvanized welded mesh usually 0.5 m to 1.8 m. PVC coated welded mesh usually 0.5 m to 1.2 m. Roll Length: Common 30 m per roll Packing: Waterproof paper in rolls. Plastic film, carton or pallet packing can be arranged by order. Custom Size: Mesh size, wire diameter, roll width and packing can be made according to buyer requirement.

1.0m-4.0m Height Chain Link Fence 40mm-75mm Mesh For Sports & Farm Yuda offers durable chain link fence made of galvanized steel and PVC coated steel wire. Available in standard 40mm to 75mm diamond mesh openings, wire diameters from 2.0mm to 4.0mm, and fence heights ranging from 1.0m to 4.0m. Supplied in 10m to 30m rolls with knuckle or twist edge finishes. Flexible for uneven ground and easy to install with complete accessories. Our chain link fence is widely used for residential boundaries, sports courts, farm enclosures, industrial perimeters and construction site temporary fencing. Chain link fence is woven diamond mesh fencing, made from galvanized steel wire or PVC coated galvanized wire. Sold in roll form, it gets installed with matching posts, rails, ties, clamps and gates. It fits long fencing routes and uneven terrain perfectly. Common diamond hole sizes cover 40mm to 75mm. Clients can confirm fence height, wire thickness, surface treatment, pole specification and gate style to meet actual project demands. Widely applied for property boundary, sports ground, farm, school, factory, roadside and temporary site isolation. Specifications Material: Galvanized steel wire, PVC coated galvanized steel wire Mesh Opening: 40mm, 50mm, 60mm, 75mm. Small holes suit sports and security fencing, large sizes fit regular boundary use Wire Diameter: Bare wire 2.0mm-4.0mm; PVC coated finished wire 3.0mm-5.0mm Fence Height: 1.0m, 1.2m, 1.5m, 1.8m, 2.0m, 2.4m, 3.0m, 3.6m, 4.0m Roll Length: 10m, 15m, 20m, 25m, 30m, customized length acceptable Surface Treatment: Hot dipped galvanized, electro galvanized, PVC coating, coated accessories optional Edge Style: Knuckle-knuckle, twist-twist, knuckle-twist. Knuckle edge fits public areas, twist edge offers better safety protection Color: Silver galvanized, green, black, grey, blue and custom colors Post Type: Standard round steel post, square post available per drawings Support Accessories: Line post, end post, top rail, tension wire, tension bar, tie wire, clamps, hinges, lock parts and related fittings Installation Way: Concrete embedded fixing, base plate mounting, temporary base setup based on site condition Gate Type: Single swing gate, double swing gate, sliding gate, pedestrian gate and vehicle gate Packing: Mesh rolls compressed and wrapped; poles and accessories packed separately for container shipment

The 2-Piece Ball Valve is an industrial valve that uses threaded connections to connect to pipelines, allowing for easy installation and removal in plumbing and industrial applications. It consists of two main parts, the body and the end cap, making it beneficial for maintenance and for a thorough cleaning of the ball, seat, and other internal parts by disassembling the valve. The valve is commonly used to control the flow of fluids by rotating a spherical ball with a bore (hole) through it to either allow or block the flow. This design allows for instant on/off control and low-torque operation, and the ball's tight seal prevents leaks, even under high pressure. Our 2-piece ball valves are known for their reliability, versatility for various fluids, efficient flow control, low pressure drop, minimal leakage, and easy maintenance. These ball valves are available in a variety of pressure models, such as 1000WOG, 1500/2000WOG, or 3000WOG, and are mainly made of stainless steel 316 (ASTM A351 Gr CF8M) or carbon steel ASTM A216 Gr. WCB, providing excellent corrosion resistance, high strength, and durability. Each valve includes a blow-out proof stem and adjustable stem packing, ensuring the security and high performance. Additionally, we have some models available with mounting pad and direct mounting options for actuators installation.

Copper Wire Mesh Brass & Phosphor Bronze Woven Mesh Roll Yuda provides premium woven mesh crafted from copper, brass and phosphor bronze. Mesh counts span 6 to 360 mesh, with wire diameters ranging from 0.051mm to 0.711mm. Standard roll widths include 0.914m, 1.0m and 1.5m, and each roll comes in 30 meters length. Plain, twill and dutch weave styles are available. With superior electrical and thermal conductivity, our mesh fits EMI shielding, industrial filtration, architectural decoration, screen printing and general screening purposes. Copper wire mesh is woven metal cloth produced from copper, brass and phosphor bronze wire. It delivers superior electrical and thermal conductivity. When exposed to air and moisture, the surface will gradually form natural patina, which belongs to normal material characteristics. We supply three common weaving styles: plain weave, twill weave and dutch weave. Standard roll widths are 0.914m, 1.0m and 1.5m, with fixed roll length of 30m. This versatile mesh serves industrial screening, electromagnetic shielding, electrical connection, interior decoration and insect prevention works.

High-quality steel wire coated with zinc for corrosion resistance and long-term industrial use. Wire Diameters and Sizes: 0.90, 1.25, 1.60, 2.00, 2.50, 3.05 mm to suit diverse applications. Zinc Coating: 130-225 g/m2. Protective hot-dip coating ensures durability based on wire diameter. Coil Inner Diameter: 340-500 mm Coil Outer Diameter: 850-900 mm Coil Weight: 550-650 kg Tensile Strength: 340-500 N/mm2 Elongation: 10% standard, 0.87 mm wire has minimum elongation at break of 7.5%. Wrapping Test: Wire passes mandrel test with diameter 4 x nominal wire diameter; no break occurs after one complete turn. Electrical Resistivity: Max 138 Ohm.mm2/km Surface Finish: Hot-dip galvanizing process ensures bright, even coating. Applications: Binding, fencing, reinforcement, mesh, wire fabrication, cable support, and other industrial needs.

We offer galvanized straight cut wire for construction, industrial, and agricultural use. Available in multiple diameters and lengths, this wire is made from low-carbon steel with hot-dip or electro-galvanized coating. It is ideal for rebar tying, wire mesh production, fencing, and bundling. Straight cut design ensures easy handling, cutting, and installation. Suitable for bulk orders and export, our galvanized straight cut wire supports projects in building construction, civil works, warehouse storage, and agricultural fencing applications.

Galvanized Steel Flat Wire for Construction, and Reinforcement Mesh Fencing Galvanized Steel Flat Wire is a durable industrial material available in low- and high-carbon grades (Q195, Q235, SAE1006). Cold-rolled with zinc coating for corrosion resistance, widths range 2-16.5mm and thickness 0.2-5.5 mm. High tensile strength and flexibility suit applications including wall ties, reinforcement, springs, clips, staples, wiper blades, structural components, fencing, and vineyard supports.