Metal Products

Porduct Name PTFE gas-liquid filter/demister Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name 500 mesh PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE PTFE material woven filter screen mesh Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name Export standard 500 mesh PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name 200 mesh PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE filter cloth Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name PTFE filter screen Brand PTFE/PVDF Mesh size 0.5-400Mesh 0.3X0.5mm 1X2mm 2X3mm 3X6mm 4X8mm 5X10mm Wire diameter thickness 5.0mm-0.05mm Weaving method Plain weave, twill weave, mat weave Diamond shaped hole, circular hole, square hole, elongated circular hole, hexagonal hole Density 2.2g/cm3 Melting point -200～+250℃℃ Characteristic (1) Chemical stability: Almost all chemical resistances, strong acids, strong bases, and organic solvents do not affect it. (2) Thermal stability: The cracking temperature is above 400 ℃. Therefore, it can operate normally within the temperature range of -200 ℃ to 300 ℃, and can reach up to 250 ° C Suitable for various high-temperature, strong acid, strong alkali chemical fields. (3) Friction reducing properties: PTFE material has an extremely low friction coefficient of only 0.02, which is 1/40 of rubber (4) Self lubrication: The surface of PTFE material has outstanding self-lubricating properties, and almost all viscous substances cannot adhere to its surface.   Appliaction High temperature resistance - operating temperature up to 250 ℃. Low temperature resistance - with good mechanical toughness; Even if the temperature drops to -196 ℃, it can maintain a 5% elongation rate. Corrosion resistance - exhibits inertness towards most chemicals and solvents, and can withstand strong acids, alkalis, water, and various organic solvents. Climate resistance - has an aging life in plastics. High lubrication - is the highest friction coefficient in solid materials. Non adhesive - refers to the small surface tension in solid materials that does not adhere to any substance. Non toxic - physiologically inert, with no adverse reactions when implanted into artificial blood vessels and organs for a long time. The weaving process adopts arrow loom plain weave, diagonal weave, and dense weave, and the weaving mesh can be controlled between 15 mesh and 400 mesh. Polytetrafluoroethylene gas-liquid filter can be used for a long time in any type of acidic or alkaline medium. Polytetrafluoroethylene gas-liquid filter can withstand the corrosion of hydrofluoric acid, phosphoric acid, sulfuric acid, nitric acid, hydrochloric acid, various organic acids, organic solvents, and other highly corrosive chemical media. Even highly corrosive aqua regia (a mixture of concentrated sulfuric acid and concentrated nitric acid) is helpless against it. It is widely used in industries such as aviation, chemical, electronics, bridges, textiles, machinery, papermaking, ceramics, etc. Contact Information Whatsapp:+86-13315865785 Email:estrellayue@ , ofolan.com M.P:+86-13315865785

Minimum Order: 1 bags

1. Product Features: - Triple Shale Shaker Screen replacement designed for high-intensity drilling operations. - Compliant with API standards for optimal performance. - Durable construction ensures longevity and reliability in harsh drilling environments. - Efficient design maximizes solids control and fluid handling capabilities. - Easy installation and maintenance for seamless integration into existing shaker systems.   2. Orbital 3000 Triple Shale Shaker Screen Applicable Groups: - Oil and gas drilling companies seeking improved efficiency and performance in their shaker systems. - Drilling contractors looking to upgrade their equipment to meet industry standards and regulations. - Maintenance teams responsible for ensuring smooth operations and minimal downtime during drilling operations. - Equipment suppliers catering to the needs of the oil and gas industry.   3. Applicable Scenarios: - Offshore drilling rigs operating in challenging environments where reliability and performance are essential. - Onshore drilling sites with high-intensity drilling operations requiring efficient solids control and fluid handling. - Exploration and production projects where compliance with API standards is mandatory to ensure safety and environmental protection. - Well intervention and workover operations that demand superior Shaker Screen performance under varying conditions.

Technical Parameter Material: stainless steel 304/316/316 L. Construction Type: PWP (perforated wear plate). Wear Mesh Shape: rectangle. API RP 13 C Designation: API 20 – API 325. Series: DX, DF, HP optional. Color: green. Package: 4 pcs. per carton，packed in wooden case   313 PWP Derrick Shaker Screen has an operating handle on one side of the screen and a triangle breach in the center of the opposite side. Thanks to the machine assembled backside seal rubber, even if the strip appears a small broken part, the other parts will remain stable on the back panel. The most obvious benefit of the PWP Screen is better oil resistance. And mesh sizes are commonly available from API 40 to API 270.   Competitive Advantage Effective Solid Control. The 313 PWP shaker screen can be designed to effectively separate solid particles from drilling fluids, ensuring better solid control and improving overall drilling efficiency. High Capacity. It has the ability to handle a larger volume of drilling fluid, allowing for greater productivity during drilling operations. Superior Screen Performance. The 313 PWP shaker screen provides exceptional performance in screen accuracy, durability, and longevity, reducing the need for frequent replacement and maintenance. Customizable Options. It offers customization options to meet specific drilling requirements, such as mesh size, screen area, and screen type, enabling optimal performance in various drilling conditions. Compatibility. The 313 PWP shaker screen can be compatible with a wide range of shakers, allowing seamless integration into existing drilling equipment and facilitating easy replacement. Warranty Period: 1 year. Working Life: 400–450 hours.

Technical Parameter Material: stainless steel 304/316/316 L. Construction Type: Wave Type. Wear Mesh Shape: rectangle. API RP 13C Designation: API 20 – API 325. Series: DX, DF, HP optional. Color: green. Package: 2 pcs per carton, packed in wooden case.   SJ-Wave DH Shaker Screen is one of the most popular Derrick Shaker screens replacement. It is designed for the high capacity HYP 4-panel shale shakers. Installed with Wave screens, the non-blanked screening area has increased 20% than conventional flat screens. All replacement shaker screens for Derrick shale shakers are all compliant with API RP 13C (ISO 13501), the new industry standard for physical testing and labeling of shaker screens.   Adaptable Shale Shaker Model SJ-Wave DH shaker screens are used as the substitute screen for: Derrick HYP 4-panel shaker. Derrick Triple HYP shaker. Derrick Dual HYP with mud cleaner. Derrick HYP VE (Vapor Extraction).   Competitive Advantage Stainless steel 304/316 wire mesh for longevity. Increase shaker capacity and reduce mud loss. Non-blanked screening area increased by more than 20%. Scientific & reasonable cost control system for competitive price. API RP 13C (ISO 13501) compliant. Adequate inventory in the shortest time to meet customers' demand. Warranty Period: 1 year. Working Life: 400-450 hours.

Technical Parameter Material: stainless steel 304/316/316 L. Construction Type: Wave Type. Wear Mesh Shape: rectangle. API RP 13C Designation: API 20–API 325. Series: DX, DF, HP optional. Color: green. Package: 2 pcs per carton, packed in wooden case. SJ-Wave 2000 shale Shaker Screen is manufactured based on the innovated design of Derrick Corporation. This type of shaker screen is constructed of multiple layers of stainless steel wire mesh cloth with different densities. Arrange these layers reasonably and exactly, the finished Shale Shaker Screen with revolutionary three-dimensional corrugated screens structure. Pyramid screens offer 125% to 150% usable areas of traditional flat multi- layered screens. And the fluid capacity also has been increased.   Adaptable Shale Shaker Model SJ-Wave 2000 shaker screens are used as the substitute screens for: Derrick FLC (Flo-Line Cleaner) 2000 3-panel shaker. Derrick FLC (Flo-Line Cleaner) 2000 4-panel shaker. Derrick 48-30 shale shaker. Derrick FLC (Flo-Line Cleaner) 2000 series mud cleaners. Derrick FLC Plus, FLC with AWD, HI-G dryer.   Competitive Advantage API RP 13C (ISO 13501) compliant. Resistant to corrosion, high temperature and collision. Larger area and higher conductance. Increase shaker capacity and reduce mud loss. Scientific & reasonable cost control system for competitive price. Higher flow rates without sacrificing cut point integrity. Adequate inventory in the shortest time to meet customers' demand. Warranty Period: 1 year. Working Life: 400-450 hours.

Derrick 500 Wave Shaker Screen replacement is manufactured for all Derrick 500 series shale shakers. Innovative tension fingers and two quick-lock 1/2 turn tension bolts on each screen panel make the installation faster, easier and more reliable. The bottom layer with low mesh counts is waved by coarse wires, then tightly bonded to the backing plate. It offers longer service life and maximizes the separation efficiency. Find high-quality replacement wave screens for your Derrick 500 Series shale shakers at competitive prices. Our screens are designed for durability and efficient solids control. Contact us for pricing and availability.   Technical Parameter Material: stainless steel 304/316/316 L. Body Material: stainless steel plate. Construction Type: Wave Type. API RP 13C Designation: API 20 – API 325. Series: DX, DF, HP optional. Color: green. Package: 2 pcs per carton, packed in per wooden case.   Adaptable Shale Shaker Model SJ-Wave 500 shaker screens are used as the substitute screen for: Derrick FLC (Flo-Line Cleaner) 503 shaker. Derrick FLC (Flo-Line Cleaner) 504 shaker. Derrick FLC (Flo-Line Cleaner) 503 drying shaker. Derrick FLC (Flo-Line Cleaner) 504 drying shaker. Derrick FLC (Flo-Line Cleaner) 513 shaker. Derrick FLC (Flo-Line Cleaner) 514 shaker. Derrick FLC (Flo-Line Cleaner) 513 VE (Vapor Extraction). Derrick FLC (Flo-Line Cleaner) 514 VE (Vapor Extraction). Remakrs: The trade marks Derrick, FLC, and Pyramid are owned by Derrick Corporation.   Competitive Advantage Resistant to corrosion, high temperature and collision. Quick-lock tension system, excellent trapping (dreg) effect. 56% more screen surface area than flat screens. Maximize the solids removal capabilities. Increase shaker capacity and reduce mud loss. API RP 13C (ISO 13501) compliant. Adequate inventory in the shortest time to meet customers' demand. Warranty Period: 1 year. Working Life: 400-450 hours

产品名称 Cr20Ni80 编织金属丝网合金穿孔金属拉伸金属 激光穿孔金属 品牌 Cr20Ni80 Cr15Ni60 Cr20Ni35镍铬高温合金编织丝 网孔

Minimum Order: 1 bags

Product Name Hafnium Electrode Mesh Model Hf Density 13.31 g/cm3 Melting Point 2227 ℃  characteristic (1) Hafnium is a metallic element with the symbol Hf, atomic number 72, and atomic weight 178.49. Elemental substance is a shiny silver gray transition metal. (2) Hafnium does not react with dilute hydrochloric acid, dilute sulfuric acid, and strong alkaline solutions, but is soluble in hydrofluoric acid and aqua regia (3) The main use of hafnium is to make control rods for nuclear reactors. (4) Pure hafnium is an important material in the atomic energy industry due to its plasticity, ease of processing, high temperature resistance, and corrosion resistance. (5) Hafnium has a large thermal neutron capture cross-section and is an ideal neutron absorber, which can be used as a control rod and protective device for atomic reactors. (6) In the electrical industry, cathodes for X-ray tubes can be manufactured. Hafnium alloy can be used as a forward protective layer for rocket nozzles and gliding reentry vehicles, while Hf Ta alloy can be used to manufacture tool steel and resistance materials. Application Hafnium mesh is used in the aerospace industry to produce engine components for aerospace aircraft, rockets, nuclear industry, submarines, and more, such as combustion chambers, combustion mesh ducts, turbopumps, and so on. Contact Iformation Email:estrellayue@ofolan.com Whatsapp:+86-1 , 3315865785 M.P:+86-13315865785

Minimum Order: 1 bags