Metal Products

Porduct Name Military Zirconium Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Aerospace Zirconium Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Nuclear Grade Zirconium Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Circular Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Wire Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Plate Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Product Name Sintered Molybdenum Basket Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name Neodymium Iron Boron Sintered Molybdenum Mesh Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name Molybdenum Mesh Disc Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name Molybdenum Rhenium Alloy Wire Mesh Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name Molybdenum Mesh Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name High-Temperature Tungsten Mesh Shielded Tungsten Wire mesh Tungsten Wire Braided Mesh Model W1 HW61 HW91 ,etc Mesh Size 5Mesh-200Mesh Wire Diameter Thickness 0.5mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 19.3 g/cm3 Melting Point 3380 ℃  Characteristic The resistivity of tungsten wire mesh is 5.3 * 10 ^ -8, with high melting point, high resistivity, good strength, low vapor pressure, and extremely high temperature resistance and creep resistance. Eu Fu Lang rare precious alloy wire mesh is used to produce tungsten wire mesh and high-temperature tungsten mesh. The surface is smooth, the mesh is uniform, there are no broken wires or leaks, and it can be stably used in harsh environments such as vacuum, high temperature, and high pressure Application Tungsten mesh, with its high temperature resistance, is commonly used as a heating element, heat treatment support mesh, electromagnetic shielding mesh, vacuum furnace heat treatment grid, RF electromagnetic shielding, light wave filtering and corrosion resistance for structural components, heating elements, integrated circuits, filtered gases, aerospace, military and other applications that work in extremely high temperature and high pressure harsh environments. The purity of the high-temperature tungsten mesh provided by Fulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes. The melting point of the tungsten mesh is as high as 3380 ℃, which has extremely high temperature resistance. High temperature tungsten mesh and tungsten wire mesh in stock specifications: 6 mesh, 20 mesh, 30 mesh, 40 mesh, 60 mesh, 100 mesh, 150 mesh tungsten wire mesh. Our company has stock of tungsten wire mesh all year round, which can meet the small batch orders of experimental units and the urgent production schedule of large industrial units, saving you the high cost and long time of customizing separately. Special specifications can be customized according to the drawing requirements for sample processing Contact Information M.P:+86-13315865785 Email:estrel , layue@ofolan.com WhatsApp：+86-13315865785

Minimum Order: 1 bags

Product Name High-Temperature Tungsten Mesh Shielded Tungsten Wire mesh Tungsten Wire Braided Mesh Model W1 HW61 HW91 ,etc Mesh Size 5Mesh-200Mesh Wire Diameter Thickness 0.5mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 19.3 g/cm3 Melting Point 3380 ℃  Characteristic The resistivity of tungsten wire mesh is 5.3 * 10 ^ -8, with high melting point, high resistivity, good strength, low vapor pressure, and extremely high temperature resistance and creep resistance. Eu Fu Lang rare precious alloy wire mesh is used to produce tungsten wire mesh and high-temperature tungsten mesh. The surface is smooth, the mesh is uniform, there are no broken wires or leaks, and it can be stably used in harsh environments such as vacuum, high temperature, and high pressure Application Tungsten mesh, with its high temperature resistance, is commonly used as a heating element, heat treatment support mesh, electromagnetic shielding mesh, vacuum furnace heat treatment grid, RF electromagnetic shielding, light wave filtering and corrosion resistance for structural components, heating elements, integrated circuits, filtered gases, aerospace, military and other applications that work in extremely high temperature and high pressure harsh environments. The purity of the high-temperature tungsten mesh provided by Fulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes. The melting point of the tungsten mesh is as high as 3380 ℃, which has extremely high temperature resistance. High temperature tungsten mesh and tungsten wire mesh in stock specifications: 6 mesh, 20 mesh, 30 mesh, 40 mesh, 60 mesh, 100 mesh, 150 mesh tungsten wire mesh. Our company has stock of tungsten wire mesh all year round, which can meet the small batch orders of experimental units and the urgent production schedule of large industrial units, saving you the high cost and long time of customizing separately. Special specifications can be customized according to the drawing requirements for sample processing Contact Information M.P:+86-13315865785 Email:estrel , layue@ofolan.com WhatsApp：+86-13315865785

Minimum Order: 1 bags

Product Name High-Temperature Tungsten Mesh Shielded Tungsten Wire mesh Tungsten Wire Braided Mesh Model W1 HW61 HW91 ,etc Mesh Size 5Mesh-200Mesh Wire Diameter Thickness 0.5mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 19.3 g/cm3 Melting Point 3380 ℃  Characteristic The resistivity of tungsten wire mesh is 5.3 * 10 ^ -8, with high melting point, high resistivity, good strength, low vapor pressure, and extremely high temperature resistance and creep resistance. Eu Fu Lang rare precious alloy wire mesh is used to produce tungsten wire mesh and high-temperature tungsten mesh. The surface is smooth, the mesh is uniform, there are no broken wires or leaks, and it can be stably used in harsh environments such as vacuum, high temperature, and high pressure Application Tungsten mesh, with its high temperature resistance, is commonly used as a heating element, heat treatment support mesh, electromagnetic shielding mesh, vacuum furnace heat treatment grid, RF electromagnetic shielding, light wave filtering and corrosion resistance for structural components, heating elements, integrated circuits, filtered gases, aerospace, military and other applications that work in extremely high temperature and high pressure harsh environments. The purity of the high-temperature tungsten mesh provided by Fulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes. The melting point of the tungsten mesh is as high as 3380 ℃, which has extremely high temperature resistance. High temperature tungsten mesh and tungsten wire mesh in stock specifications: 6 mesh, 20 mesh, 30 mesh, 40 mesh, 60 mesh, 100 mesh, 150 mesh tungsten wire mesh. Our company has stock of tungsten wire mesh all year round, which can meet the small batch orders of experimental units and the urgent production schedule of large industrial units, saving you the high cost and long time of customizing separately. Special specifications can be customized according to the drawing requirements for sample processing Contact Information M.P:+86-13315865785 Email:estrel , layue@ofolan.com WhatsApp：+86-13315865785

Minimum Order: 1 bags