Metal Products

The electrical round copper rod wire products produced by our company are widely used in industries such as transposed conductors, ultra-high voltage cables, various types of wires and cables, various types of enameled wires, network wires, electronic wires and communication wires. Bare Copper Wire (8mm) Performance Advantages Bright surface without burrs Superior performance and quality Can meet your technical requirements for drawing fine lines, fine lines and special products Jintian group is a professional brass plate company, we provide brass bibcock valve, copper tube, end feed fittings, etc. For more information, please feel free to contact us!

Minimum Order: 2 barrels

As an important material, enamel coated copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors and other industries as well as new energy vehicles, rail transit, wind power, smart home and other fields. To satisfy different requirements of those fields, it divides into various kinds of specification, such as Self-Solderable Polyurethane Series, Nylon Overcoating Series, Polyester Series, Polyester-imide Over coated with Polyamide-imide, Polyester-imide Series, Corona-resistant Enameled Wires Used for Inverter-fed Motors, etc,. In the coming days, the rapid development of modern industry promotes bright future, but also posts great challenge and higher requirements on technique. As a good and responsable enamel coil wire supplier, our company produces various types of enameled wire. If you are interested in any enameled wire, please contact us. We will negotiate with you at a competitive enameled copper wire price. Types of enamel insulated wire For Sale Magnet Wire for Motor: Magnet Wire for Motor mainly uses QZ,QZY, QA and Q(ZY/XY) . It has good resistance to abrasion and solvent, capable of working under extreme situations where strong resistibility against very high and low temperature. Electric motors are found in numerous diverse applications, such as fans, pumps, machines, household appliances, power tools. Magnet Wire for Compressor: Magnet Wire for Compressor mainly uses Q(ZY/XY)-2/200, which has relatively high requirements on the high ambient temperature requirements in the use of enameled wires and high refrigerant resistance. Generally, in the early stage, the life test needs to be done for half a year and the surface needs to be coated with refrigeration oil. Plate Magnet Wire: Plate Magnet wire is mostly used in winding coils for EV-motor, transformers, motors, generators, and various electrical devices. It has excellent electrical conductivity, thermal stability, scratch resistance, solvent resistance, with advantages of good heat dissipation performance and high magnetic field efficiency when wound into a coil. Magnet Wire for EV: Magnet Wire for EV mainly uses enamel coated magnet wire during the degree of 180—240. Compared with round wire, the benefit of enameled flat wire is no gap and the larger volume efficiency raise to coefficient of space and makes motor miniaturization and high output. The enameled flat wire has a low friction coefficient and good winding property. Jintian group is a professional brass plate company, we provide brass bibcock valve, copper tube, oxygen free copper, etc. For more information, please feel free to contact us!

Minimum Order: 2 barrels

IEC 60317 Enameled Wire The Self-solderable polyurethane enameled copper wire produced by our company is suitable for relays, micro-motors, transformers, instrumentation and various electronic components and winding coils. IEC 60317 Enameled Wire Performance Advantages Can be welded directly, easy to dye Low dielectric loss at high frequencies and good brine hole performance IEC 60317 Enameled Wire Performance Parameter Thermal level Specifications range Standard code level mm AWG IEC GB/T NEMA JIS B 130 0.04-1.6 14#-44#* 60317-4 6109.4 MW75-C C3202 F 155 60317-20 6109.10 MW79-C H 180 60317-51 6109.23 MW82-C C3202 Jintian group is a professional brass plate company, we provide brass bibcock valve, copper tube, copper press fittings, flat enameled copper wire, etc. For more information, please feel free to contact us!

Minimum Order: 2 barrels

Insulated Copper Tube As a big and responsible copper pipe insulation manufacturer, we produced the insulation copper tube is mainly used in the air conditioning and refrigeration industry. If you're looking for a quality copper pipe with insulation, Jintian copper can provide you with the customized standards you need. We're able to meet your order needs for special specifications, as well as black rubber insulation. Insulated Copper Tube Performance Advantages Can provide you with customized standards (up to 50 meters in length) Can meet your order needs for special outer diameter and wall thickness Can meet your needs for black rubber insulation Can provide you with products covered with copper tubes at both ends.

Minimum Order: 2 barrels

Welded wire mesh are made of high quality wire through automatic process and sophisticated welding technique. The finished products is level and flat with sturdy structure. The welded wire mesh are the most excellent anti-corrosion resistance among all the steel wire mesh products, it is also the most versatile wire mesh due to its wide application in different fields. The welded wire mesh can be galvanized, PVC coated, or stainless steel welded wire mesh. 2 inch by 4 inch openings keep out pests and small critters Strong mesh, won't come loose if cut in pieces or under pressure. Galvanized before welding. Anti-corrosive and anti-rust. Great for property boundaries, enclosing gardens and more Specification of galvanized welded wire mesh Opening Wire Diameter Width0.4-2M Length5-50m electric galvanized before welded, electric galvanized after welded, hot-dipped galvanized before welded, hot-dipped galvanized after welded, PVC coated, Stainless steel wire In inch In metric unit 1/4" x 1/4" 6.4 x 6.4mm BWG24-22 3/8" x 3/8" 10.6x 10.6mm BWG22-19 1/2" x 1/2" 12.7 x 12.7mm BWG23-16 5/8" x 5/8" 16x 16mm BWG21-18 3/4" x 3/4" 19.1 x 19.1mm BWG21-16 1" x 1/2" 25.4x 12.7mm BWG21-16 1-1/2" x 1-1/2" 38 x 38mm BWG19-14 1" x 2" 25.4 x 50.8mm BWG16-14 2" x 2" 50.8 x 50.8mm BWG15-12 2" x 4" 50.8 x 101.6mm BWG15-12 4" x 4" 101.6 x 101.6mm BWG15-12 4" x 6" 101.6 x 152.4mm BWG15-12 6" x 6" 152.4 x 152.4mm BWG15-12 6" x 8" 152.4 x 203.2mm BWG14-12 Note: Special specifications can be made according to customers requires.

We specialize in the production of 304 Stainless Steel Wire Mesh and extended products. You can get our most true ex-factory price to ensure your best interests! 304 Stainless Steel Wire Mesh is made of stainless steel wire, and then woven together to form a square opening or a rectangular opening. Due to the characteristics of stainless steel, the processed 304 stainless steel wire mesh has high wear resistance, long service life, accurate mesh, uniform structure, no curling, easy to use, and uniform thickness, antistatic and acid and alkali corrosion resistance. 304 stainless steel wire mesh has the characteristics of acid resistance, alkali resistance, high temperature resistance and wear resistance. Therefore, in recent years, stainless steel mesh has been widely used in many different fields. 304 Stainless Steel Mesh is usually used for various construction purposes. The paving of roads and highways is an important part of it. Sometimes, with the help of 304 stainless steel wire mesh, airport roads can also be built. People often use it together with some floor slabs to build concrete floors to ensure the strength and durability of the entire building. There are many anti- wire meshes used for construction purposes, but they do not produce any form of rust or corrosion. 304 Stainless Steel Wire Mesh is also widely used in various agricultural, industrial and construction sites. Infrastructure projects include here, commercial premises and many other residential areas. Not only that, 304 Stainless Steel Wire Mesh is also used to construct swimming pools, manholes, tunnels and parking lots. 304 Stainless Steel Wire Mesh is also widely used for many security purposes. It can help people stay safe in place. They come in a variety of styles and types, and have colors suitable for the purpose. There are also various heights. Most of them can be found in online stores. You can also buy them at remote stores that offer these items. They are very helpful not only in the security department, but also in other places. They are usually used to prevent rodents, pests and other animals that usually infest the house and leave bacteria behind. There are tiny plastic or aluminum holes inside. Stainless steel is also often used here.  Can provide you with wire mesh material:SUS302, 304, 316, 304L, 316L. Features of this stainless steel wire mesh: Square aperture, less rigid than plain weave, especially suitable for deforming, strong wire cloth due to ratio of wire diameter and aperture, it is mostly used for filtration less than 63 μm.

Defensive Barrier also named as Hesco bastion, Hesco defense wall, sand cage, welded gabion box, etc.It is a prefabricated, multi-cellularsystem, made of zinc coated steel welded mesh and lined with non-woven geotextile. Units can be extended and joined using the providedjoining pins. It is easy installed with using minimal manpower and commonly available equipment. After extended, it is filled into sand, stone, then hesco barrier like a defence wall or bunker, it is widely used for military fortification and flood control. Accessories Supplied With Carrier Units. Details of Defensive Barrier Product Name Hesco defense wall Product Type Welded mesh Material Galvanized steel wire or Galfan/zinc-5%aluminum wire Wire Diameter 4.0-5.0mm Geotextile 250g-400g Geotextile colour sand clolor, Brown, Gray,and Military Green. Mesh hole 76.2mm× 76.2mm, 50mm× 50mm, 75mm× 75mm, 100mm×100mm Model Height(M) Width(M) Length(M) Number of cells YY-1(Mil 1) 1.37 1.06 10 5+4=9 cells YY-2(Mil 2) 0.61 0.61 1.21 2 cells YY-3(Mil 3) 1.0 1.0 10 5+5=10 cells YY-4(Mil 4) 1.0 1.5 10 5+5=10 cells YY-5(Mil 5) 0.61 0.61 3.05 5 cells YY-6(Mil 6) 1.68 0.61 3.05 5 cells YY-7(Mil 7) 2.21 2.13 27.74 5+4+4=13 cells YY-8(Mil 8) 1.37 1.22 10 4+5=9 cells YY-9(Mil 9) 1.0 0.76 9.14 6+6=12 cells YY-10(Mil 10) 2.12 1.52 30.5 5+5+5+5=20 cells

Chain Link Fence Wholesale provides strength and durability at an affordable price. The Chain Link Fence is made of braided steel wire in a diamond pattern, then galvanized or coated with vinyl. Due to its economic nature, it is used in residential and commercial applications. Because of the security it provides, it is favored by state and local governments. Chain Link Fence Wholesale Specification Chain Link Fence Material Galvanized iron wire or PVC coated iron wire Surface Treatment PVC coated, PVC sprayed, electric galvanized, hot dipped galvanized Wire Thickness 1.0-6.0mm Mesh Opening 20x20mm, 40x40mm, 50x50mm, 60x60mm, 80x80mm, 100x100mm etc Mesh Height 0.5m-6m Mesh Length 4m-50m Post & Rail Diameter 32mm, 42mm, 50mm, 60mm, 76mm, 89mm etc Post & Rail Thickness 1.5mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm etc

Anti Climb Fence, also known as high security fence, 358 fence, 358 mesh fence, anti cut fence or anti climb prison fence. The most special specification of Anti Climb Anti Cut Fence is the mesh size: 76.2mm*12.7mm. Of course, here is also the anti-climbing and anti-cutting function of Anti Climb Security Fence. Usually the weight of Anti Climb Security Fence is three or four times that of other types of fence nets, because dense metal wires require more material than other types. It is not enough to produce a good quality Anti Climb Security Fence using a good welding machine. A skilled welding worker is also nessessary during production. It is very important to control the speed of the machine and correct the direction of the wires. If the production speed is too fast, the wire will overheat and the position of the wire needs to be corrected manually. Parameters of Anti Climb Fence/ Anti Cut Fence Height 1200mm / 1400mm / 1600mm / 1800mm / 2000mm / 2200mm Width 1500mm / 2000mm / 2500mm Wire Thickness 3.0mm/4.0mm, 3.5mm/4.0mm, 4.0mm/4.0mm Mesh Size 76.2mm*12.7mm / 75.0mm*12.5mm / 100mm*15mm Post Square Post (40mm*60mm / 60mm*60mm / 60mm*80mm) Clamp Metal Clamp / Flat Bar Covered Rain Cap Metal Cap / Anti-UV Plastic Cap Surface Hot Dipped Galvanized (505g/m²) / Electric Galvanized + Polyester Powder Coated (All colors available)

POLYPROPYLENE (PP) WIRE MESH MIST ELIMINATOR DEMISTER PADS We supply polypropylene (PP) mist eliminator corrugated knitted wire mesh for making gas liquid filter or demisters. Benefits of Using Polypropylene (PP) mesh mist eliminator: PP is a kind of thermoplastics, knitted pp mesh demister is constructed from multi layer mesh media which functions well at economic cost; The non-metal mist filter pad provides dense mat through which gas flows and liquid entrainment is trapped through impingement or coalescence, hence, it can prevent the mists or droplets from passing downstream, achieving liquid-gas separation; PP mesh filter has good resistance to oxidation and corrosion resistance. Material : Polypropylene ( Simplified as PP) Shape: Round, Square, Oblong, etc. Wire Diameter : 0.08 to 0.50mm, while 0.2mm-0.25mm are the most common wire diameter specifications. Width : 40mm, 80mm, 150mm, 200mm, 300mm, 400, 500mm, 600mm, 800mm, 1000mm, 1200mm, 1400mm, etc. Features: Simple structure, small size, light weight, porosity, pressure drop contact with large surfacearea, in addition to foam separation efficiency, light weight,easy maintenance, protection of the environment, reduction of air pollution and long life. Application Polypropylene knitted mesh and PP mist eliminators are mainly used in Boilers, Evaporators, Gas-liquid, Solid-liquid separation,Vaccum towers,Absorbers, Lube towers, Elimination of entrainment, Elimination of toxic air pollutants, Used as gaskets in cable, automobile and computer industry, Desalination plants. Product Types Plastic / PP Mist Eliminator Demister Pad Material: PP, PE, FRP, TEFLON Specification: Demister diameter 2900 mm Structure: 3 segmented The mist eliminator operating condition: Gas Volume 56845 M3/hr(CMH), 40-60 C degree, 100-200 Pa, Fume/mist capture, Wet Scrubber (FGD) Demister HEIGHT: 300 mm, (150 mm x 2) Knitted Polypropylene Mesh Polypropylene / PP knit mesh in 6"” width PP knitted mesh Vane Pack Demisters in PP (polypropylene) or FRP (fiberglass reinforced plastic) for Mist Eliminators Resistant to steam of NH3 and H2SO4 with Temperature 60 degree C - For Horizontal Gas Flow type - Size : 5050mmW(vertical) x 6200mm(horizontal) divided 6 segment. - Height of Streamline required 380mm - Distant between vanes : 25mm - Material : FRP / PP - Vane without hooks - Application: Grease Filter / Mist Remover / Pre-Filter

KNITTED WIRE MESH TUBING - STAINLESS STEEL KNITTED MESH TUBE, COPPER KNITTED WIRE TUBE We supply Wire Mesh Tube in a range of metal materials (stainless steel and copper mainly ), in flattened tube or rounded tube, single layer or multi layer to meet specific requirements. Stainless and copper knit wire mesh tubes are widely used in insulation, extrusion molding, in the automotive industry and electronics industry. Exported to Ireland, USA, Norway, Belgium and other countries. Knitted Wire Tube / Mesh of SS 304 and SS 316 304 knitted stainless steel mesh 760 mm tube, 0.28 mm wire dia x 50 m roll, or 316 stainless steel wire, up to 1020 mm tube width General specifications: Tube (Not Single Layer) - Diameter 375mm Rounded (Not Flattened) Thickness of the wire: 0.3mm Width of the wire: 0.6mm Width of the roll: 590m Material: SS304 Mesh Tube of Compressed Type Knitted Wire Tube Axial Compressed with Needle Count 20 Length of umcompressed tube: 83 +/- 5 mm Diameter of uncompressed tube: 62,5 +/- 3 mm Material: C9D (1.0304), C4D ( 1.0300 ), EN10016-2 (0) UNS G 10080 (9) Wire dia.: 0,76 +/- 0,02 Knitted Wire Tube Axial Compressed with Needle Count 22 Length of umcompressed tube: 70 +/- 5 mm Diameter of uncompressed tube: 62,5 +/- 3 mm Material : C9D (1.0304), C4D ( 1.0300 ), EN10016-2 Wire Dia : 0,6 +/- 0,02

STAINLESS STEEL KNITTED WIRE MESH GASKETS We supply Knitted Wire Mesh Gasket Axial Compressed, for mufflers, exhaust silencers and seals, used mainly as auto parts for exhaust system and EMI shielding system. Our knitted gaskets are made with a range of wire mesh sizes, pressure drop and surface area statistics. Major Types of knitted wire mesh gaskets: Knit Mesh Gasket 304 SS OD: 1.2" ID: 0.5" Thickness: 0.4" Material: 304 Stainless steel knitted mesh Wire Size: 0.0025" Weight: 6 grams Knitted Wire Mesh Gasket For UK customers Knitted Wire Mesh Gasket type ST.032.SL Stainless Steel Wire Mesh Gaskets 316 and 304 SS stainless steel wire mesh gaskets, ID 0.5"/12.7mm, OD 1"/25.4mm. Filter for gas flow

POLYESTER KNITTED MESH SCREEN ROLLS AND TAPES We supply polyester knitted mesh for making of demisters and liquid gas filters. The synthetic fiber web as filter material has many advantages over stainless steel and various metal mesh knitted netting: Durable, washable and excellent corrosion resistance. Knitted Mesh Screen in Polyester, Working Temperature - 200 C to +150 C Material: 100% polyester Processing: Knitted Screen -Heat set processed Colour: Natural White Content Polyster Weight (oz/sq yard) 0.44 Max Waves (holes)/inch 12.5+/-2 Mullen Diaphragm Burst (psi) 15 Thickness 0.007+/-0.001 INCH Construction 22 meshes/sq inch Working Temperature Intermittant: - 200 C to +150 C Melting temperature ; 288 C(approx) Thermal Conductivity : ≤ 0. 17 W/ m K or less Specific heat : 2.3 x 103 J/kg K Total Weight Loss : ≤1.0% Collected Volatile Condensable Materials : ≤0.1% Width : 4.5 feet Shrinkage : ≤ 5% 100 % Polyster Knitted Screen, for Work at - 250°C to +150°C Material: POLYSTER NET Space qualified, 100% Polyester knitted Screen 1. Colour: Natural White 2. Content: POLYESTER 3. Weight: 12gms/m2 4. Mesh Design: 15-20 mesh/cm2 5. Burst strength: 1.0 Kgf /cm2 (approx.) 6. Thickness: Max. 0.15 mm 7. Working Temperature - Intermittent: - 250°C to +150°C 8. Working Temperature - Continuous: - 250°C to +120°C 9. Thermal Conductivity: Max. 0. 17 W/ m K 10. Total Weight Loss: Max.1.0% 11. Collected Volatile Condensable Materials: Max. 0.1% 12. Width: 58~ 60inch 13. Quantity : 2.0 Lakh Sq ft Material to be supplied in the form of Continuous rolls of 10000 sq ft approximately 14. Shrinkage : Max. 5% Supplying Forms Material can be supplied in the form of continuous knitted rolls of 10000 sq ft; Polyester Mesh Tapes; Compressed mesh tube; Demister pad for vesseled towers.

PTFE (POLYETHYLENE) KNITTED WIRE MESH FOR FILTER DEVICES Non-metallic filter wire mesh is popularly knit woven by PTFE polyethylene or PP. We supply PTFE knitted mesh to Australia, Portugal and other countries. Application Knitted PTFE mesh fabrics are mainly used for gas and liquid filter. Work temperature: -200~+250 Features: Good anti-corrosion: Good acid resistance, alkali resistance, etc. Material: Mixed fabric, fibre wire, PTFE wire mesh, PP, PC, PE, etc. Range:0.10mm-0.55mm (common wire through is: 0.20mm - 0.25mm). Hole Size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same,width is different). The surface condition of knitted mesh: Flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications. The Common Width of knitted mesh: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400mm, 500mm, 600mm, etc. PTFE mesh is mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding for manufacturing a filtration device.