Metal Products

Wholesale airport security fence, is mostly made use of in the flight terminal for defense. The main panel and also V panel is welded with 4.0 mm/5.0 mm low carbon steel cable. The surface area therapy of QYM airport fencing is galvanized + electrostatic polyester powder coated or galvanized + PVC layered. airport fence supplier Material: Material: Low-Carbon Iron Wire Application: Airport, Garden Fence, Residential, etc

PRODUCTS DESCRIPTION Components: The HIGH TENSILE ROCKFALL MESH system consists of four main components that are carefully coordinated with each other: 1.HIGH TENSILE ROCKFALL NET   It is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2. Detailed Product Description: 1.wire diameter:3mm 2.high tensile strength 1770Mpa 3.mesh size:80mm x 140mm 4.Mesh shape:diamond 5.Material:high tensile steel wire 6.Corrosion protection:super coating 7.Coating:150g/m2 8.Breaking load of single wire:12.5KN 9.Tensile strength:110KN/m HIGH TENSILE ROCKFALL MESH mesh standard roll: Mesh edges knotted Roll width:2.3m-3.5m Roll length:110m-30m Weight:1.75kg/m2 2.SOIL OR ROCK NAILS Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. 3.SPIKE PLATES Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the HIGH TENSILE ROCKFALL MESH. These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope. The plates are galvanized and have dimensions of 13.0''*7.5"*0.4"(330mm*190mm , *10mm). 4.CONNECTION CLIPS The connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These claw are hot dip galvanized and consist of 0.25"(6mm) thick steel spiral. 5.SOIL OR ROCK NAILS Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. Sure,if you want to know more aboue mesh,you can click here to know.

Minimum Order: 20 square metres

Toggle latch is a mechanical piece of hardware which in locked position ensure secure fastening of two surfaces, panels or objects and when unlocked allow separation. The main components are the base plate with lever and attached loop and separate part the catch plate. It is widely used in automobiles, ships, bullet trains, aerospace, medical equipment, nuclear power plants and various industrial and civil equipment.

Minimum Order: 500