Minerals & Metals

The stainless steel coil is divided into Austenitic, ferrite, martensite, duplex (ferrite austenite) stainless steel cold rolled coil and stainless steel hot rolled coil.

Minimum Order: 1 bags

Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens. The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering.This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required. The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side- tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top, running in a cross-flow orientation, or positioned underneath the rope with the wire. The Tufflex Screen Features • Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck. • Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths. • The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflex's cloth construction. • The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer periods between changeover and less downtime during busy screening periods. • The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes, similar to woven wire.

The circular vibrating screen is a new type of vibrating screen with circular vibration, multi-layer number and high efficiency. The circular vibrating screen adopts a cylindrical eccentric shaft exciter and an eccentric block to adjust the amplitude. The material screen has a long flow line and a variety of screening specifications. It has reliable structure, strong excitation force, high screening efficiency, low vibration noise, sturdy and durable, and maintenance. Convenient and safe to use, this vibrating screen is widely used in product grading in mining, building materials, transportation, energy, chemical and other industries. Vibrating screen is an important equipment for solid physical classification and is widely used in mining, building materials, coal preparation, energy, chemical and other industries. The vibrating screen uses the exciting force generated by the exciter. The screen body periodically reciprocates along the direction of the exciting force. The material bounces around the screen surface. The screen surface is collected and transported to the designated area to achieve the purpose of grading or de-intermediation. The amplitude can be adjusted by adjusting the weight of the eccentric block. generally divided into circular vibrating screen and linear vibrating screen . Specification of Circular Vibrating Screen Machine The vibrating screen uses the exciting force generated by the exciter. The screen body periodically reciprocates along the direction of the exciting force. The material bounces around the screen surface. The screen surface is collected and transported to the designated area to achieve the purpose of grading or de-intermediation. The amplitude can be adjusted by adjusting the weight of the eccentric block. generally divided into circular vibrating screen and linear vibrating screen.

Polyurethane Flip Flop Screen has been in operation for decades for screening of moist or humid materials. Made from highly resilient polyurethane elastomer, these filp flow mats withstand deformation without loss of elasticity or dimensional accuracy. They are designed both for bolting and clamping systems, so to fit all screen decks worldwide with no distinction depending on machine brand, deck dimensions and installation characteristics. Panel size: Length & Width & Thickness are custom designed Aperture size: 3~32mm Aperture shape: Square, Rectangle, Slot, Circular Working Principle of Flip Flop Screen Vibrating Flip Flop Screen are increasingly used in material screening and preparation applications. This is largely due to their high efficiency. In principle, Flip Flop Screen is a subclass of other high-frequency vibrating sieves. The Flip Flop Screen works by combining the double vibration principle with a flexible polyurethane type screen. Dual vibratory forces act to apply a linear acceleration to the material passing through the screen. Vibrations are simultaneously applied to the elastic screen, which stretches and relaxes quickly. The stretching and relaxation of the screen transfers energy to the material, causing it to "jump" or "pop". This secondary vibration in turn enhances the separation of the materials. Advantages of Flip Flop Screen Flip flow screener offers a number of benefits over other equipment. Their compact design is particularly advantageous in both reducing machine footprint and increasing operational efficiency. Because most models require fewer moving parts than alternative screening equipment, flip flop screens are much more modular. High Screening Efficiency With polyurethane screen and streamlined design, the flip flop screen is less prone to mechanical wear and tear. The elastic mesh media used in more than common materials from glass and scrap to fine-grained minerals and slag. The flip-flow screens is ideal for wet and sticky materials. 

Poly ripple screen is produced on the basis of self-cleaning screen grids, available in high-strength steel grids or stainless steel, with PU strips on the bars of the deck. The self-cleaning screen is a non-blinding, high-quality screening surface that provides accurate screening and size. The combination of different sized wires used in fabrication means they vibrate at different frequencies to create a self-cleaning surface. Due to its flat surface, self- cleaning screens can be used in some applications with smaller wire diameters than braided wires. Flakes and strands are separated from the finished product while problems such as clogging are greatly reduced. Specification of Vibrating Screen Medias Size: As required Aperture: 3mm - big Wire Diameter: According to aperture Strip Material: Polyurethane Strip Width: > 1.5cm Strip Thickness: >8mm Strips Quantity: As client's requests Features of Poly Ripple Screen • Anti-clogging • Anti-pegging • Increased wear life • Accurate sizing

Polyweb Urethane Screen Panel is specificialed for Derrick Stack Sizer, mainly for sieving the fine metal sands, such as: silica sands, gold sands etc, the model is TH48-30, TH48-42, TH56-42, others can be designed. Polyweb Urethane Screen Panel is a kind of polyurethane screen panel made of polyurethane sheet with high quality screen surface. Polyweb Urethane Screen Panel is abrasion resistance and much longer service life than the woven vibrating screen mesh. Moreover, the property of anti-blinding makes it feasible to screen materials which is considered difficult or impossible to screen previously. Polyweb Urethane Screen Panel has an extremely fine openings which is as fine as 0.043mm, which is suitable for a wide variety of wet and dry applications. Specification of Polyweb Urethane Screen Panel  Material: Polyurethane Type: Screen Panel Aperture Range: 0.043mm - 10mm Feature: Wear-resisting, noiseless, light etc Usage: Derrick Stack Sizer Size: TH48-30, 1040*700mm, other size also can be designed as requests Working Time: 6 - 12 months

All the products can process by customizatio , n. Please send us the 2D and 3D drawings ,  with size and tolerance. We will evaluat , e the drawings for you and process accordin , g to the draw ings. And we will keep  , the drawings strictly confidential. Customer , s can also choose  processing methods. Wi , th over 20 years experience, ShenZhen YuJiaX , in Hardware Products Co.,  Ltd. is a lea , ding manufacturer of precision metal parts i , n China, we pr ovide products to consumer ,  electronics, automotive, medical, and indust , ria l.

Minimum Order: 15 packs

All the products can process by customizatio , n. Please send us the 2D and 3D drawings ,  with size and tolerance. We will evaluat , e the drawings for you and process accordin , g to the draw ings. And we will keep  , the drawings strictly confidential. Customer , s can also choose  processing methods. Wi , th over 20 years experience, ShenZhen YuJiaX , in Hardware Products Co.,  Ltd. is a lea , ding manufacturer of precision metal parts i , n China, we pr ovide products to consumer ,  electronics, automotive, medical, and indust , ria l.

Minimum Order: 15 packs

Oil Filter Black Plastic Spray Filter Epoxy Resin Net Black Spray Plastic Wire Mesh Epoxy resin coated mesh is made of barbed wire mesh, aluminum alloy mesh or stainless steel mesh coated with epoxy resin powder electrostatically sprayed. It is mostly used to make support carriers for hydraulic filters and air filters, and some are also used for door and window protection. As a new product developed by the company, it can replace traditional woven mesh in many fields, including stainless steel wire mesh and galvanized mesh. Epoxy mesh has three advantages of economy, environmental protection and durability. Carbon Steel Expoxy Coated Wire Mesh Material Carbon Steel Wire Thickness 0.18mm Mesh Count 18x14mesh Roll Width 0.914m/1m/1.2m/1.4m/1.6m/1.8m/2.6m Roll Size 1.0m*30m/50m/100m/300m, 1.22m*30.5m/50m/100m/300m Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 0 Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 1 Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 2 Black Plastic Epoxy Coated Carbon Steel Wire Mesh Roll 0.914m 1m High Durability 3

PRODUCT DESCRIPTION Stellite 1 ERCoCr-C POLYSTEL 1 Cobalt Welding Rod Hard Facing Rod Engine Valve Pump Sleeves Product Description WL-Co1 is a hardfacing alloy possessing excellent abrasion and corrosion resistance for applications such as pump sleeves, rotary seal rings, wear pads, expeller screws and bearing sleeves. It retains its hardness at temperatures in excess of 760°C (1400°F). WL-Co1 contains a high proportion of hard, wear resistant primary carbides. These render the alloy well suited to applications involving extreme low-angle erosion and severe abrasion, with some sacrifice in toughness. Compared to other WL-Co alloys it is more crack-sensitive, and care should be taken to minimize the cooling stresses experienced during casting and hardfacing processes. Due to its high hardness and wear resistance, WL-Co1 should only be finished by grinding. Common Names: Stellite 1, Polystel 1 Standard: AWS 5.21-2001, ERCoCr-C Chemical Composition(%) C Si Mn Mo Cr W Ni Fe Co 2.5 1.00 ≤1.00 ≤1.00 29.00 12.5 ≤3.00. ≤3.00 Rest Characterisitic AWS / ASME: A5.21 / SFA5.21 ERCoCr-C Metal to metal Wear Excellent Cold / Hot Abrasion Excellent / Excellent Erosion / Corrosion Excellent / Excellent Impact Unsatisfactory Magnetic No Deposit Layers 2 Max Thermal Conductivity 14.5 W/m.K, 100.5 Btu-in/hr/ft2/°F Electrical Resistivity 94.0 µ-ohm.cm, 37.0 µ-ohm.inch Packing Details For length 350mm 500mm pack in carton each 5kg For 1000mm packing in 5kg tube, 4 tubes in one 20kg carton For length more than 1000mm, pack in wooden box directly2.5-8.0mm Hard Facing Rod Stellite 1 ERCoCr-C POLYSTEL 1 Cobalt Welding Rod Engine Valve Pump Sleeves 0 Applications Used to make rotating sealing ring, gouge type bearing sleeve, drill head, etc Hydro pulper disc Oil drilling tools Mixer seals and rotors

Seamless steel pipe is made of whole round steel perforated, the surface of the steel pipe without weld, called seamless steel pipe. According to the production method, the seamless steel pipe can be divided into hot rolled seamless steel pipe, cold rolled seamless steel pipe, cold drawn seamless steel pipe, extrusion seamless steel pipe, pipe jacking and so on. According to the section shape, the seamless steel pipe is divided into round and irregular two kinds, irregular pipe has square, oval, triangle, hexagonal, melon seed shape, star shape, with a variety of complex shapes. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick wall seamless steel pipe and thin wall seamless steel pipe. Seamless steel pipe is mainly used for petroleum geological drilling pipe, petrochemical cracking pipe, boiler pipe, bearing pipe and automobile, tractor, aviation high- precision structural steel pipe. Seamless carbon steel pipe are divided into hot-rolled and cold-rolled (drawn) steel pipes. Hot rolled carbon steel pipe is divided into general steel pipe, low and medium pressure boiler steel pipe, high pressure boiler steel pipe, alloy steel pipe, stainless steel pipe, petroleum cracking pipe, geological steel pipe and other steel pipes. The seamless steel pipe is made of perforated whole round steel, and the steel pipe without weld seam on the surface is called seamless steel pipe. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes. Seamless steel pipes are mainly used as petroleum geological drilling pipes, cracking pipes for petrochemical industries, boiler pipes, bearing pipes and high-precision structural steel pipes for automobiles, tractors and aviation.

Minimum Order: 1 bags

PRODUCT DESCRIPTION 99.99% Purity Factory Supply Copper Plate Introduction Copper Plate, made of pure copper or copper alloy in various shapes including rods,wires, plates, strips,tubes, foils,ect.,collectively referred to as copper. Copper materials include copper plates, copper rods,copper tubes,copper strips,copper wires,copper bars,copper materials. 1. The surface of hot rolled plate should be clean; Delamination, cracks, peeling, inclusion and green rust are not allowed, but repair is allowed, and the thickness of the plate should not exceed the allowable deviation after repair. The surface of hot rolled plate is allowed to have slight and local scratches, spots, pits, pressed objects, wrinkles, roller marks and other deviations that do not make the thickness of the plate exceed the allowable deviation. 2. The surface of cold rolled plate should be smooth and clean; Delamination, cracking, peeling, inclusion and green rust are not allowed. The surface of the cold-rolled sheet is allowed to have slight and local scratches, spots, pits, pressed objects, wrinkles, roller marks, oil marks and other deviations that do not make the thickness of the sheet exceed the allowable deviation. Product Name Copper Plate/Sheet Material Copper Standard ASTM, AISI, JIS, DIN, GB, EN Grade TP1,TP2,C10930,C11000,C11300,C11400,C11500,C11600, , C12000,C12200,C12300 2C12500,C14200,C14420,C145 , 00,C14510,C14520,C14530,C17200,C19200,C21000, C , 23000,C26000,C27000,C27400,C28000,C33000,C33200,C3 , 7000,C44300,C44400 ,C44500,C60800C63020,C65 , 500,C68700,C70400,C70600,C70620,C71000,C71500, , C71520,C71640,C72200,TU1,TU etc Shape Flat plate Size Thickness 0.3mm~100mm;Width 50mm~2500mm; Length 1000mm~12000mm Surface Mill finish, polished, anodizing, brushing,sand blasting, powder coating,etc Payment terms T/T,L/C,western union, Paypal Price terms CFR,FOB,CIF,Ex-work,CNF Application 1)Further making utensil. 2)Solar reflective film 3)The appearance of the building 4)Interior decorating:ceilings,walls,etc. 5)Furniture cabinets 6)Elevator decoraction 7)Signs,nameplate,bags making. 8)Decorated inside and outside the car 9)Household appliances:refrigerators,microwave ovens,audio equipment,etc. 10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc. Package Standard export seaworthy package or as required. Contact If you have any question,please feel free to contact me. Material China GB/T Japan JIS German DIN American ASTM UK EN TU0 C1011 -- C10100 C110 TU1 C1020 OF-CU C10200 C103 TU2 C1020 OF-CU C10200 C103 T1 C1020 OF-CU C10200 C103 T2 C1100 SE-CU C11000 C101 TP1 C1201 SW-CU C12000 -- TP2 C1220 SF-CU C12000 -- Composition(%) TU1 Cu P O Other TU2 99.97 0.002 less than 0.002 balance T1 99.95 0.002 less than 0.003 balance T2 99.9 - - balance TP1 99.9 0.004-0.012 - balance TP2 99.9 0.015-0.040 - balance C10200 99.95 0.001-0.005 - balance C11000 99.9 - - balance C12000 99.9 0.004-0.012 - balance C12200 99.9 0.015-0.040 - balance 99.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 099.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 199.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 299.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 399.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 4 Production Processing 99.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 5 Packing & Delivery 99.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 6 99.99% Purity Copper Sheet Metal Plate AISI ASTM GB EN DIN JIS Standard 7

2200mm Stainless Steel Metal Plate Mill Edge 321 309S 310S Stainless steel has different grades, correspond to different hardness, thermoplastic, plasticity and weldability. If you don't understand, you can tell us your requirements. Stainless steel can be customized for different surfaces, anddifferent surfaces have different applications. For example, 8k mirrors are generally used for decoration. We have more than 10 years of experience in this industry and believe that we can satisfy any demand for stainless steel raw materials.

1mm-20mm Astm A36 Q235 Q345 Ss400 Mild Carbon Steel Plates 20mm Thick Steel Sheet PriceMild Carbon Steel Plate Sheet 20mm Thickness ASTM A36 Q235 Q345 SS400 0 Is carbon steel as good as cast iron? While cast iron is slow to heat up, carbon steel pans reach the ideal cooking temperature quickly. The slight bow in the carbon steel cookware allows the pan to cool down quickly. This feature is desirable when cooking delicate foods such as flash frying, sautéing, etc. Cast iron pans have better heat retention. Mild Carbon Steel Plate Sheet 20mm Thickness ASTM A36 Q235 Q345 SS400 1 Product Name Carbon steel sheet/plate Length 1000mm -12000mm Thickness 0.2mm~300mm Width 6 , 00mm-1250mm Painted Surface Electroplating, spraying, drawing, polishing Material Q195-Q420 Series,SS400-SS540 Series,S235JR-S355JR Series,ST Series,A36-A992 Series,Gr50 Series,etc. Surface Mild steel plain finish, hot dip galvanized, pre galvanized, color coated, ect. Processing method Bending, Welding, Decoiling, Cutting, Punching, Polishing or as customer's request Technology Hot roll, cold roll, cold drawn, ect. MOQ 1 Ton Price Term T/T,L/C,Western Union,Paypal,Apple Pay DN OD Outside Diameter ASTM A53 GRA / B BS1387 EN10255 SCH10S STD SCH40 LIGHT MEDIUM HEAVY MM INCH MM (mm) (mm) (mm) (mm) (mm) 15< , br>1/2” 21.3 2.11 2.77 2 2.6 - , 20 3/4” 26.7 2.11 2.87 2.3 2.6 3.2 25 1” 33.4 2.77 3.38< , br>2.6 3.2 4 32 1-1/4” 42.2 2. , 77 3.56 2.6 3.2 4 40 1-1/2” 48.3 2.77 3.68 2.9 3.2 4 50 , 2” 60.3 2.77 3.91 2.9 3.6 4.5< , br>65 2-1/2” 73 3.05 5.16 3.2 , 3.6 4.5 80 3” 88.9 3.05 5.49 3.2 4 5 100 4” 114.3 3.05 6.02 3.6 4.5 5.4 125 5” 141.3 , 3.4 6.55 - 5 5.4 150 6” 168.3 3.4 7.11 - 5 5.4 200 8 , ” 219.1 3.76 8.18 - - -