Minerals & Metals

Welded Mesh Gabions Architectural Wall Cladding - Retaining Wall for Buildings - Retaining the soil as well as decoration Welded Mesh Panel Gabions are popularly used in architectural and landscape construction by securing the gabions units, which are filled on site with stones or quarry to form the appropriate retaining wall structure, cladding and other landscape design. Filled with natural stone, the welded mesh gabions render a harminous mixing into the settings and landscape and offer a decorative effect to the building. Main types of architectural gabions welded: Galvanized steel, pvc coated or Galfan coated welded gabions. The cages are filled with stone to form a flat container form, then placed one by one and connected firmly to each other with high tensile lacing wire. They are used to build an ancient-feeling cladding for the walls in castles or villa. Welded mesh gabions inner lined with geo-mat can be used for military bastion. Reasons that gabions welded are chosen for architectural wall cladding: a, The welded mesh panel structure gabions are hot dipped galvanized or green plasticized, hence achieve the surface of bright silver or Dark green color or other colors for options. They offers different styles of decorations to the building. You can choose according to your design needs. b, The gabion boxes with hot dipped galvanized steel or plastic coated steel mesh enjoy good corrosion resistance and work for a long time. Hence can form a permanent wall cladding that is maintenance free. It will not collapse even under big scope of deforming. c, The cost of the welded mesh gabions are economic. d, The stone gabions offers a long-time-story-telling feeling and suit all castles. e, The gabions baskets are designed with collapsible structures for filling natural stones. The stones can be easily found anywhere, to save cost and to give a nature decorative effect. f, The gabions wall cladding plays the role of retaining the soil as well as decoration. g, The hexagonal twisted mesh gabions are not suitable for wall cladding as the mesh are flexible and not as solid and strong as welded mesh basket containers.

Hot Dipped Galvanized Gabion Mesh Cells Hot dipped galvanized gabion wire mesh cells are used for building blocks of airport and other projects, also for anti blast barriers in military uses. The galvanized wire mattress or basket cells are mostly composed of square or oblong opening welded panels. The gabion cell baskets are in rectangular shape for easy laying and firmed building purpose. The gabion cell walls are decorative as well as protective. Major materials for gabions cells are electric galvanized wire , hot-dipped galvanized wire, pvc coated galvanized, Galfan wire 95%zinc -5% Al and 90%zinc -10%Al. Aerct supplies three types of gabion cells listed as below, we also welcome custom orders. 1, Galvanized Steel Gabion Basket Cells with Rectangular Mesh Holes: Gabion basket, heavy type: 1000X2000X500mm; Gabion basket, light type: 1000X500X1000mm. Gabion cell wire diameter: Galvanized steel wire Diameter of gabion mesh wire: ≥ 2.00 mm Gabion Mesh Size or Aperture: 60X80 mm Hole Shape: Oblong (rectangular) Hot Dip Zinc coating quantity for galvanized wire: ≥ 2400 g/m2 Lacing wire: All gabions and mattresses cells use a 2.20mm wire diameter lacing wire for binding and fixing together the mesh panels during the erection process.

Steel Pipe Type ASTM A106 seamless steel pipe for oil and gas line Outside Dia(mm) 10.3-1219mm Wall Thickness(mm) 1-80mm Length Random length:1-12m Standard API5L , ASTM A106 Gr.B, ASTM A53 Gr.B, ASTMA179/A192/A213/A210/370WP91,WP11, , WP22 GB5310-2009,GB3087-2008,GB6479- 2013,GB9948-201 , 3, GB/T8163-2008, GB8162-2008,GB/T17396-2009 Material 20#, A53B, A106B, API 5L ST37.0,ST35.8,St37.2,St35.4/8,St42,St45, , St52,St52.4 STP G38,STP G42,STPT42,STB42,STS42,STPT49,STS49 Surface Black painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE,ect Certificates API5L ISO 9001:2008 TUV SGS BV etc Packaging Loose package, Packaged in bundles(3Ton Max) , bundled pipes with two slings at the both end for easy loading and discharging, End with Plastic caps or as per requirement Application 1. Fluid pipe 2. Power Plant 3. Structure pipe 4. High and low pressure Boiler tube 5. Seamless pipe /tube for petroleum cracking 6. Conduit pipe 7. Scaffolding pipe pharmaceutical andship,building etc.

Hexagonal Gabion Mesh/ Woven Gabion Mesh /Gabion Basket Gabion box is made from the woven wire mesh.Its also called as gabion mesh,gabion basket, Its widely used for the protection of slope,mountain,railway and highway. The main raw material for Gabion box: 1)Hot dipped galvanized wire,with heavy zinc.(zinc weight from 60g-300g/m²) 2)PVC coated hot dipped galvanized wire; 3)Galfan wire(Zn+5%Al or Zn+10%Al) 4)PVC coated Galfan wire. Application: -Reinforece the riverbank and channel flood off; Rock falling protective project -Water loss and soil erosion protection; Soil reinforcement wall -Sea side erode resistance project; Port projects; Retaining wall; Road project.

Copper Rod Standard: ASTM, AISI, JIS, ISO, EN, BS, GB, etc. Material: T1, T2, T3, C11000, C11100, C11300, C11400, C11500, C1100, TU1, TU2, C10200, C1020 , TP1, TP2, C12000,C12200, C14500, C14700, C15000, C1201, C1220, etc.  Diameter: 5mm-150mm Length: as customers' requirement. Size can be customized according to customer needs. Surface: Mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required. Export to: America, Australia, Brazil, Canada, Peru, Iran, Italy, India, United Kingdom, Arab, etc. Package: Standard export package or as required. Price term: EXW, FOB, CIF, CFR, CNF, etc. Certificates: TUV& ISO& GL& BV, etc. Payment: L/C, T/T, Western Union, etc. Copper Rod has good mechanical properties, good plasticity in hot state, acceptable plasticity in cold state, good machinability, easy fiber welding and welding. It is widely used in parts with high electrical conductivity, machinability and corrosion resistance, such as Electrical connectors, automotive parts, switch parts, pipe fittings, soldering heads, torch heads, transistor bases and furnace components. The website: https://www.buckcoppergroup.com/

Minimum Order: 1 bags

A span of the primary stockyard: 760 meters long, the space frame projection span is 112 meters, the projection area is 85,120 square meters, and the expansion area is 125,000 square meters; Primary stockyard B span: 760m long, 112m grid projection span, 85,120m2 projection area, 125,000m2 expansion area; The structure and features of this project are as follows: The raw material yard shed project is a closed cylindrical reticulated shell shed, which adopts a multi-center cylindrical front-mounted quadrangular pyramid bolt ball and a welded ball mixed node reticulated shell structure, and the 1 axis and the 191 axis are closed by a steel truss structure. The axial span of the space frame support is 102.4m, and the inner chord welded ball rubber pad plate transition plate support is used to support the top of the concrete stepped column. m, the total elevation of the space frame is 38.473m. The space frame length column spacing is 8m, the length space frame size is 4.00m, the span direction space frame size is 4.194m, and the space frame vector height is 4.00m. The specifications of the engineering space frame members are: 88.5x4.00, 114x4.00, 140x4.00, 159x6.00, 159x8.00, 180x8.00, 180x10.0, 219x10.0, 219x12.0 in total 9 types; The ball specifications are BS130, BS150, BS180, BS200, BS220, BS240, a total of 6 types, and the support adopts the welding ball with the specification of WSR500x20. The total weight of the space frame is 8536 tons. If you have a similar project to be built, please come to consult us, we will analyze it for you for free！！ website：https://www.cnxzlf.com/nanjing-datang-po , wer-plant-dome-bulk-coal- storage-shed/

Minimum Order: 200

Embossed Plate and Aluminum Embossed Tread Plate: Patterns, Defination and Types On Embossing Metal Panels: Metal Materials to be Embossed: Aluminum, Stainless Steel, Mild Steel and Brass Embossing Patterns: Embossed plate patterns can be oval, round holes, long holes, diamond or other ornamental designs or patterns. What is Embossing? Embossing is the process used to raise a pattern of copy on the original (normal) surface of metal, paper or leather by the use of matched male and female dies. Embossing changes the nature of the material that has been embossed. More often than not it elevates the standard and quality of the product. Embossing thus makes things more beautiful than they originally are. The simplest of object can become pieces of art worthy of the highest praise by using a technique as easy as embossing. Of course, how good an embossed object looks depends entirely on the quality of embossing. Poor quality embossing can completely kill the appeal of an object. However, good quality embossing can make an object positively breathtaking. Embossing is used for aesthetic purposes as well as functional uses in industries. It is a technique that adds elegance and sensuality to the material surface. Embossed plates are mainly used for industrial tread flooring or architectural designs. Types of Embossing Applied for the Metal Plates: Embossing metal is the procedure by which the metal surface is pushed forward using an embossing die to cause a raised image. There are different types of embossing that can be done. The followings are types used for embossed plates. Types Of Embossing Blind Emboss: A blind emboss is the most popular type for the metal plates either for industrial anti-slippery tread plate or architectural designs. The color of the blind embossed image is the same as the color of the surface. You can also call it a self emboss or same color embossing. Single-Level Emboss: In this kind of embossing, the image area is raised to just one flat level. Embossed Aluminum Plate, One of the Most Popular Embossing Plate: Embossed Aluminum Sheet Sizes and Photos: Temper: O-H112 Sheet thickness: 0.2-5mm Sheet width: 800-1500mm

Checkered steel plate can be divided into three types: checkered carbon steel, checkered galvanized steel and checkered stainless steel plates. Can be supplied in coils or sheets. Galvanized Steel Checker Plate: Galvanized checker plate refers normally to hot dipped galvanized steel plate with zinc coating layer. The galvanizing on the steel sheet surface will help avoid rusting when the checkered steel plate is exposed to moisture environment. The zinc coating amount will meet Chinese or international standard requirements. With a certain degree of slip resistance, good corrosion resistance, beautiful appearance and economic cost, galvanized steel checker plate is widely used in elevator decorative plate, shops decoration, engineering, exterior design of the building, etc Checkered Carbon Steel Plate: This is the base metals for galvanized checker plate, seldom supplied without further coating. It costs less compared with other checkered steel, yet easily get rusty. Stainless Steel Checkered Plate Coils or Cut to Size: 300 Series as most popular materials. General Technical Introduction: Major stainless steel sheet material: SS 300 series, 200 series and 400 series. 200 series: 201,202. 300 series: 301,304,304H,304N,304L,304LN,309S, 310S,316,316Ti,316L,316N,316LN,317, 317L,32 , 1,321H,347,347H. 400 series: 405,409,403, 430,410,420, 440c. Thin gauge 2mm to 6mm; thick gauge 6.00mm to 12.70mm. Stainless steel has good mechanical properties with including excellent corrosion resistance, heat resistance. Standard followed: ASTM,AISI,GB,JIS,SUS,EN,DIN and etc. Hot rolled or cold rolled steel.

Aluminum checkered plate is a light weight metal panel used as architecture decorative panels and metal tread plate. Excellent rust resistance and fire resistance make the aluminum chequered panels high grade building materials in modern architectures: Façade, windows, doors, ceiling panel tiles, decorating panel and curtain walls; Household appliances: refrigerators, microwave ovens, audio equipment, etc. Metal floor Plate: Automobile, airplane, light rail, vehicle steps, stair treads, elevators, etc. Bar Types: Aluminium Checkered Plate can be supplied with diamond pattern checkered in one bar, three bar and five bar styles: Aluminum Alloy Types for Checkered Plates, Different Features and Uses: Aluminum Checkered Plates can be made from major 1000series, 3000series, 5000 series, 6000 series and 8000 series aluminum alloy materials. These aluminium alloy plates offer different features and uses. Details as listed below: Producing Line : We have one 1+2 hot rolling production line, six 2450mm, 2050mm, 1650mm, 1450mm cold rolling lines, two 1650mm foil rolling production lines, two 1850mm continuous rolling production lines and one roll coating production line. These equipment enables us to provide quality checkered plates products for our customers. Aluminum Checkered Plate Popular Specifications: Popular materials: aluminum checkered plate 1100 3003 5052 alloy: 1060 3003 3105 temper: H14 Plate thickness: 1.0mm-6.0mm Plate width:900mm-1500mm Aluminium checkered tread plates: Alloy: 1100,1060, 3003, 5005 5052 Temper: H14,H18,H24,H32 Plate Thickness (mm): 1.5mm to 6mm Width (mm): Up to 1500mm Length (mm): Up to 6000mm Standard: EN standard ASTM standard

Deerway supplies aluminum metals processed in three major forms: embossed, chequered, punched (perforated) . In this page, we mainly introduce perforated aluminum panels. The aluminum perforated sheet metals have less weight compared with stainless steel and the same excellent corrosion resistance. Decorative hole perforated aluminum are mainly used in manufacture of security screen doors and partitions, ceiling and wall panels and other uses. Hole Type: Slotted, Long hole, Square hole, Round hole, Triangle hole, Hexagonal hole, Diamond and Decorative. Slotted Aluminum Metal Sheet Perforated Aluminum Standard Specifications, with Hole Diameter, Staggered Center Distances, Sheet Thickness and Opening Areas: Popular Punched Aluminum Sheet Panels Sizes Examples: Aluminum Sheet Size 1220MM × 2440MM Thickness : 25MM Aluminum Sheet Size 1220MM × 2440MM Thickness : 40MM Aluminum Sheet Size 1220MM × 2440MM Thickness 1.1MM Perforated Aluminum 1220MM × 1200MM Thickness 1.2MM Aluminum Perforated Panels 1220MM × 1220MM Thickness 2MM Aluminum Panel Size 3650MM × 2440MM Thickness 2.5MM Aluminium Slotted Metal Panel Size 1220MM × 2440MM Thickness 5MM

Diamond Chequered Tread Plate ( Non-slippery Tread Plate) Materials, Technical Requirements and Uses Examples Checkered diamond pattern metal sheet is the most widely used and most common anti-slippery tread plate and stair covering material. Diamond tread plate is ideal for walkways. The raised part of the checkered metal plates makes the walking very comfortable. It is equally applicable to many areas, such as walkways, bracket plate, attic, stair treads and so on. It can be used in all slight anti-slip flooring needs. Materials for Anti-skipping tread plate: Iron, stainless steel, galvanized steel, aluminum. Choosing the Right Metal Plate Thickness for Stamping Slip-Resisting Checkered Tread Plate: Stamping chequer process: After two CNC punching, stamping, but not perforated through. To form raised or embossed patterns and designs on one surface of the metal plate, but on holes going through the stamped sheets. Thus the stamped checkered tread plate needs metal sheet material with proper thickness. If the plate is too thin, it will get punched through easily and leave opening on the sheet. If the metal plate is too thick, it is hard to get chequers on the surface. The common metal sheet thickness for checkered tread plate: between 1.2-1.8mm. Tread plates can be checkered plate, perforated metal or expanded metal sheets. Diamond (checkered) plate is one kind of anti-slippery tread plates characterized by beautiful appearance, good strength, light weight, metal material saving and many other advantages. Diamond checkered tread plate has wide range of applications in transportation, construction, decoration, flooring for equipment, machinery, shipbuilding and other fields. In general, the user of diamond tread plate has less requirements for mechanical and engineering performance. The quality requirement for diamond checkered tread plate concentrates on checkering rate, height and depth levels. Currently on the market there are two plate thickness commonly used: 1260,1000 mm. Plate width ranges from 2.0-8mm.

Durbar Chequered Plate with Anti-Skid and Attractive Surface for Flooring and Tread Plates. Sizes and Finished Products. Thickness 2mm to 12.5mm Why is the chequered plate called Durbar Plate also? Durbar plate is also known as Chequer plate or chequered plate. It is a metal plate with a regular pattern of two bars or multi-bar projections on one side, showing diamond or other shapes, with the reverse side being smooth. This kind of checkered plate is frequently made of steel, stainless steel or aluminum plate materials and is popularly chequered with double bars patterns. Hence, it gets its name Durbar plate in the United Kingdom and other countries.. Why and Where a durbar plate is used? The durbar patterns give a slightly raised surface allowing walking through yet not causing slippery, making the plate an ideal tread plate shanks. Owing to its skid-proof and attractive surface, the durbar plates are widely used in industrial flooring and constructions. Durbar plates are widely applied in construction sector for stair treads, platform and walkways as well as automobile and agricultural sectors. In enterprises, especially shops, stairs and catwalks usually employ durbar plate to protect workers' safe. Besides, modern people take it as a fashion decoration element in architectural façade, ceiling and wall panels designs Durbar Plate Used as Floor Treads Aluminum Chequered Durbar Plates Galvanized Steel Durbar Floor Plates, Five Bar Patterns Aluminum Diamond Plates, for Decorative Ceiling Plates Materials for Durbar Chequer Plates: Structural Carbon Steel Q195B, Q235B; Stainless steel 304, 304L, 316, 316L; aluminum plate; galvanized plates. Plate length by Width: 2500mm ×1250mm to 3600mm ×1500mm. Thickness: 2mm - 12.5mm.

Copper Ingots Standard: ASTM, AISI, JIS, ISO, EN, BS, GB, etc. Material: T1, T2, T3, C11000, C11100, C11300, C11400, C11500, C1100, TU1, TU2, C10200, C1020 , TP1, TP2, C12000,C12200, C14500, C14700, C15000, C1201, C1220, etc.  Size：Weight: 30 to 50 kg per ingot. Other copper ingots, according to customer requirements, from 15 to 300 kg. Surface: Mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required. Export to: America, Australia, Brazil, Canada, Peru, Iran, Italy, India, United Kingdom, Arab, etc. Package: Standard export package or as required. Price term: EXW, FOB, CIF, CFR, CNF, etc. Certificates: TUV& ISO& GL& BV, etc. Payment: L/C, T/T, Western Union, etc. Application: Generally used for secondary smelting, refining, smelting and gold or mold, for finished products. Belongs to raw materials or semi-finished products. Learn more: https://www.buckcoppergroup.com/

Minimum Order: 1 bags

At LJZ, we are committed to providing you with superlative CNC manufacturing services with great precision. Our excellent services are precision CNC swiss machining, aluminum machining, mold and moldings and surface finishes. CNC Material List Titanium Titanium alloy has high strength and low density, good mechanical properties, good toughness, and corrosion resistance. So titanium parts are widely used in medical, aviation, aerospace, chemical, metallurgy, and other industries. Aluminum Aluminum alloy machining materials are favored by engineers in various industries, and it is a commonly used material in CNC machining due to its high machinability. Stainless Steel Stainless steel has become one of the CNC machining materials often selected by engineers due to its corrosion resistance and wear resistance. Brass Copper or brass has excellent electrical and conductivity, ductility, corrosion resistance, wear-resistance, and other unique properties, which make brass or copper machining parts are widely used in power, electronics, energy, machinery, and other fields. Plastic In industrial design, in addition to commonly used metals, engineers also favor engineering-grade plastics. These plastic machined parts have favorite characteristics such as optical transparency, wear resistance, and corrosion resistance.

Minimum Order: 1 bags