Minerals & Metals

Deep Hole Drilling Machine VSMGD0145D/VSMGD0145F Description Deep hole drilling machine is a kind of special machine tool for deep hole processing with high precision, high efficiency and high automation. Depending on advanced hole processing technology (gun drill), the processing accuracy and surface roughness can be achieved by one continuous drilling process, which generally requires drilling, expanding and reaming processes. Machining hole size accuracy: IT7-IT11; Machining hole deviation: <0.5-1/1000 (Machining hole depth); Machining hole surface finish: Ra0.2-6.3um. It can carry with truss or joint robot and automatic line. A deep hole drilling machine is a metal cutting machine designed to machine very deep precision holes in almost any metal. Deep hole drilling machines can achieve the performance of specific tools such as BTA and gun drills, thereby optimizing the deep hole drilling process for manufacturers. Deep Hole Drilling Equipment is very suitable for deep holes of various sizes and production levels, and is essential for holes with a depth-to-diameter ratio of approximately 20:1 or greater. Dedicated deep hole drilling machines provide tool support, coolant delivery and process feedback, enabling manufacturers to achieve their deep hole drilling goals. Compared with CNC machining centers, these functions optimize the process and give priority to deep hole drilling methods by shortening cycle time, stabilizing tools, discharging chips, and preventing tool breakage and process failures.

Both ends of the one clamping are processed at the same time or independently, the compact vertical cutter double head CNC lathe with 100-480 mm turning length is suitable for turning, drilling, tapping and boring of precision shaft parts. Compared with traditional CNC lathe, one is equivalent to the machining efficiency of two machines, and the coaxiality can reach μ level. High precision, high efficiency, it can carry with truss or joint robot and automatical line. Technical Parameters ITEM DNL061 DNL062 Max Body Rotate Diameter, mm Ø200 Ø200 Clamping Diameter Scope, mm Ø15-Ø50 Ø15-Ø50 Turning Length Scope, mm 100-300 300-480 Spindle Clamp Diameter, mm Ø50 Ø50 X/Z Travel , mm 280/180 280/180 X/Z Fast Speed, m/min 18/24 18/24 Fool Type cutter cutter

Volume: 1(m³) Nominal loading: 2000(kg) Maximum loading: 2500(kg) Gauge: 600(mm) Length: 1970(mm) Width: 1070(mm) High: 1250(mm) Wheel base: 600(mm) Wheel diameter: 300(mm) Haule height: 320(mm) Traction: 60(kN) Minimum plane operating radius: 9(m) Body weight: 680(kg) Unloading angle: 40°

Minimum Order: 1 bags

Toggle latch is a mechanical piece of hardware which in locked position ensure secure fastening of two surfaces, panels or objects and when unlocked allow separation. The main components are the base plate with lever and attached loop and separate part the catch plate. It is widely used in automobiles, ships, bullet trains, aerospace, medical equipment, nuclear power plants and various industrial and civil equipment.

Minimum Order: 500

ALMg5 Aluminum Thin sheet O H38 H112 Temper 1-5mm thick > Alloy : AlMg5 5a05 LF5 A5056 > Temper: O H38 H112 > thin plate can supply > Sample can be supply > ASTM B209 > We have stock and can delievry within 7days ALMg5 aluminum Chemical Composition Cu Mg Mn Fe Si Zn Ti Cr each/Other Al 0.1 4.8~5.5 0.30~0.60 0.5 0.5 0.20 / / 0.05/0.1 Remainder ALMg5 Mechnical Properties Alloy Tensile Strength σbMpa) Yield Strengthσ 0.2Mpa) Enlogation (δ5%) AlMg5 Min.275 Min.145 Min.16 ALMg5 Hot Rolled sheet specification Alloy Series TypIcial Alloy Typcial Tempe Thickness (MM) Width (MM) , Length (MM) 5××× ALMg5 H38 3.0~12.0 1000~3800 2000-38000 ALMg5 Annealed aluminum plate specification Alloy Series TypIcial Alloy Typcial Tempe Thickness (MM) Width (MM) , Length (MM) 5××× A , LMg5 O/H112 3.0~12.0 1000~2600 2000-24000 ALMg5 Aluminum Thin Sheet , O H38 H112 1-5mm Aluminium Alloy Sheet 0

The wheel mill achieves the effect of mechanical force activation through the functions of mechanical mechanics such as rolling, pressing, squeezing, and rubbing. The structure of the original mixed material becomes the active material through the wheel milling, thereby increasing the strength of the product. This is not possible with other types of mixers. Comparable. It is suitable for mixing various wet and dry materials and colloids such as refractory mud, clay, fly ash, slag, tailings slag, molding sand, etc., and is widely used in refractory materials, ceramics, building materials and other industries. The rolling and mixing effect is very good, the noise is low, the production efficiency is high, the energy-saving effect is significant, the sealing performance is good, the environmental pollution is not, and the adaptability is strong. This industrial charcoal powder grinding machine also named the wheel grinder mixer, is specially designed for crushing charcoal pieces into fine charcoal powder. This wheel charcoal grinder mainly can grind charcoal powder and even mix them with the binder, water, etc. Then the processed charcoal powder can be used for further briquetting to make BBQ charcoal or shisha charcoal. https://www.charcoal-machines.com , /wheel-grinder-mixer-charcoal-powder-grinding- , machine.html

very low profile thickness 35um ED copper foil FOR Flexible Printed Circuit. Surface: Mill,mirror,brush,hair line,checkered .etc Main Purpose: Copper strip can be made to do all sorts of deep drawing and bending stress components, such as manufacturing pins,rivets, gasket, nuts, conduits, the barometer spring, screen, radiator parts, etc The product surface is black or red, has lower surface roughness,high density, high bending resistance and good etching performance, used for Flexible Copper Clad Laminate(FCCL),Fine Circuit FPC,LED coated crystal thin film. Products usage: - Flexible Printed Circuit. - LED layer of HDI . ED copper foil Specifications. 1) Thickness Range: 0.035mm. 2) standard width:1290mm. 3) ID: 76 mm,152 mm. 4) Cu Content: 99.8%. VLP ED Copper Foil Characteristics. 1. Zinc-free. 2. Excellent physics of high elongation Performance. Difference between rolled copper foil and electrolytic copper foil. Process is difference: rolled copper foil (Rolling process),ED copper foil (Electrodeposition process). Surface treatment width:rolled copper foil be limited by Surface treatment widest effective width of 520mm. Typical properties of VLP-S-B/R copper foil for FPC or inner layer of HDI. Classification Unit Requirement Test Method Foil Designation / 1 H M 1 IPC- 4562A Nominal thickness / 10um 12um 1/2 OZ (18um) 3/4 OZ(25um) 1 OZ(35um) IPC-4562A Area Weight g/㎡ 98±4 107±4 153±5 228±8 285±10 IPC-TM-650 2.2.12.2 Purity ％ ≥99.8 IPC-TM-650 2.3.15 Foil Profile Shiny side(Ra) սm ≤2.5 ≤2.5 ≤2.5 ≤2.5 ≤2.5 IPC-TM-650 2.3.17 Matte side(Rz) um ≤2.5 ≤2.5 ≤2.5 ≤2.5 ≤2.5 Tensile Strength R.T.(23℃) Mpa ≥300 ≥300 ≥300 ≥300 ≥300 IPC-TM-650 2.3.18 H.T.(180℃) Mpa ≥200 ≥200 ≥200 ≥200 ≥200 Elongation R.T.(23℃) ％ ≥4 ≥5 ≥6 ≥8 ≥10 IPC-TM-650 2.3.18 H.T.(180℃) ％ ≥5 ≥6 ≥7 ≥8 ≥8 Peel Strength(FR-4) N/mm ≥0.8 IPC-TM-650 2.4.8 Ibs/in ≥4.6 Pinholes&porosity Number No IPC-TM-650 2.1.2 Anti-oxidizatio , n R.T.(23℃) 180days / H.T.(200℃) 60 Minutes /

Honeycomb coal briquette machine is to regard the well-processed coal dust as raw material, after crush, mix, and then compress to coal briquettes. This good quality iron raw coal charcoal honeycomb briquette machine uses iron powder charcoal/raw coal charcoal as raw materials. But, at first, the raw materials should be crushed into small pieces (the diameter < 1 mm). And this machine has a large capacity, so it is high efficiency. The holes on the surface of the coal briquette make them can be easily and completely burned, reducing energy waste. At the same time, this machine owns a lot of molds, and you can change the molds easily per your special needs. After many improvements, our honeycomb coal machine has the advantages of reasonable structure, high finished product density, superior performance and long service life. https://www.charcoal-machines.com/coal-an , d-charcoal-extruder-machine.html

The biomass sawdust briquette machine can convert the wood chips&shavings, rice&peanut husks, bagasse, and other wood materials into hollow-rod solid fuel(Biomass Charcoal) under high temperature and pressure conditions. Compared to normal wood, this kind of biomass charcoal has advantages of easy ignition, high calorific value (boost 20% or more), less pollution, high specific gravity, easy storage and transport. This machine can make more use of agricultural and forestry residues like crop straw or wood scraps. https://www.charcoal-machines.com/bioma , ss-sawdust-briquette-machine.html

Model NO. Zwy50 Type Small Loader Keyword Mucking Machine Product Name 50m3 Loading Capacity Mucking Machine Motor Power 11kw Speed/H 1.45 Weight 2700 , kg Application Dimensions of Place 1.8*1.8m Application Slope ≤5° Min Turn Radius 5m Unloading Height 1200mm Unloading Distance 1300mm Digging Width 2200 Application Mining, Tunnel Type Name Zwy50 Series Mucking Loader Transmission Type Belt Transmission Material Steel Trademark , YUTONG Transport Package Naked Package Specification ISO Origin Hunan

Minimum Order: 1 bags

The carbonization furnace is a kind of equipment that can carry out dry distillation and anaerobic carbonization of wood materials containing carbon under high-temperature conditions in the furnace. During the carbonization of the material, a large number of combustible gases such as carbon monoxide, methane, and oxygen will be produced. Our carbonization furnace adopts advanced technology to recover, purify, and cyclically burn these combustible gases. This technology solves the problems of environmental pollution and heat energy required in the process of carbonization of ordinary carbonization furnaces. The carbonized material has the advantages of high calorific value, no smoke during combustion, no explosion, and environmental protection. Our carbonization furnace has the advantages of reasonable structure, energy saving, fast cooling speed, good charcoal quality, and a short production cycle. It is an ideal equipment for the carbonization of wood materials. https://www.charcoal-machines.com/ca , rbonization-furnace.html

Zirconium oxide (chemical formula: ZrO2) is the main oxide of zirconium. It is usually white odorless and odorless crystals, and is hardly soluble in water, hydrochloric acid and dilute sulfuric acid. It usually contains a small amount of cerium oxide. The chemical nature is inactive, and the high melting point, high electrical resistivity, high refractive index and low thermal expansion coefficient make it an important high temperature resistant material, ceramic insulating material and ceramic sunscreen. It is also the main raw material of artificial drilling. The gap is approximately 5-7 eV. Used in the manufacture of metal zirconium and zirconium compounds, refractory bricks and crucibles, high frequency ceramics, abrasive materials, ceramic pigments and zirconates. Chemshun ceramics can supply more ceramic products like zirconia beads , alumina balls , abrasion resistant ceramic tiles.

Minimum Order: 1 bags

Chemshun Ceramics lined pipe elbow are designed for extended service life in high wear pneumatic fly ash, bottom ash, bed ash and mill reject conveying applications. Ceramic steel composite pipe consist of single ceramic tubes sticked in steel pipe by epoxy resin adhesive glue, single-piece ceramic pipe design eliminates potential erosion and failure points caused by manual assembly of tiled ceramic fittings, thereby reducing maintenance and lower life-cycle cost. Chemshun ceramics not only supply ceramic tube but also manufacture full set of ceramic lined steel pipe with flange. .

Minimum Order: 1 bags

Description: General H type Fin production capacity General specifications of H type fin tubes Production Facility: 6 finning machines; Daily capacity up to 20 tons; Tube OD: 73 mm max. Tube Length: 18 meters max. Fin Thickness: 1.5mm ~3.5mm Fin Pitch: 10mm Min. Manufacturing Process Square or Rectangular H Fins are welded on a steel base tube. We call it H Fin Type Tubing. Acceptance Criteria Approved drawing and the delivery conditions (TDC) of clients. Additional Services Tube swaging, elbows, bends(90° / 180° or as per client's design). Quality Tests The Square or Rectangular H Finned Tube quality is assured by hydrostatic or pneumatic tests, eddy current tests and tensile tests in order to verify the mechanical bonding between inner tubes and outer fins. Surface Coating Outside-Red oxide zinc phosphate primer and inside volatile corrosion inhibitor (VCI) in water soluble tablet form. Delivery Condition: Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish at both ends of Square or Rectangualr Fin Tube. Applications: Economizers , Heat exchangers Marine boilers Specifications: Items General Materials Popular ASTM /ASME Materials Core Tube Material Carbon Steel Alloy Steel Heat Resistant Steel, Stainless Steel 1. Carbon Steel: A106 / A179 /A192 / A210 etc... 2. Stainless Steel: TP304/304L,TP316/TP316L, TP347 etc... 3. Alloy Steel: P5,T5,P9,T9,T11,T22 Fin Material Carbon Steel Stainless Steel 1. Carbon Steel 2. Stainless Steel: TP409/410,TP304/304L,TP316/TP316L etc... Dimensions Data Sheet We're Supplying. General Descriptions of H-fins Popular Specifications we make Tube OD(mm) 25mm to 73mm Tube Wall thickness(mm) 2.5mm Min. Tube length(mm) 18000mm Max. Fin thickness(mm) 1.5mm to 3.5mm Fin pitch(mm) 10mm Min. Please email us for more information. Competitive Advantage: We have more than 10,000 square meters workshop, including 6 H-FIN TYPE finning machines, daily extrusion capacity up to 20 tons. The Square or Rectangular Fins H-Finned Tubes are the preferred tube choice for high pressure boilers. Fins can be manufactured by stamping process in almost any shape and size. In-line fin and tube spacing allows for cleaning with excellent choice in sooting or fouling atmospheres. Fin height and spacing are limited only by heat transfer considerations. Fins and tubing can be similar or dissimilar metals.