Minerals & Metals

·Submersible slurry pump with a 4-pole motor for an increased lifetime and greater convenience. ·High chrome alloy impeller combined with agitator for pumping heavy slurry. ·Slim desigh with a top discharge enabling inStallation in smaller casing. ·For bentonite mixed waterin foundation works or muddy water in civil engineering works. Designed to operate fully immersed in the slurry, submersible slurry pumps are ideal for handling highly abrasive and/or corrosive fluids. Their materials of construction and design are optimized to withstand harsh conditions, surpassing other types of pumps. These pumps are ideal for applications that require operation in confined spaces, reduce noise and vibration, or manage deep installation needs.

·The body of motor and pump is made of rigid cast iron which can be used for long-lasting durability. ·Greatly increased maximum submersion depth due to mechanical seal resistant to high pressure. ·The impeller and Inlet plate are made of high chrome alloy.The hardness of this material is at least 58 HR, itʼs more durable than other materials. ·Due to the special design of the water passage, the water can make the motor cool down when they pass through the pump body. ·With the vertical outlet design at the top, this pump can be used in smaller space. ·This Submersible Drainage Pump has built-in thermal protection to protect the motor over thousands of times.

Effectively solves the production challenges of long-distance transportation and high-concentration slurry faced by the mining industry. Stable and reliable operation, wear-resistant, and long service life. Compared to traditional slurry pump relay methods, our Long Distance Transport Slurry Pump simplifies installation, maintenance, and operation, significantly reducing costs. MATERIAL Casing are made of ductile Iron, ribs help casing to withstand higher pressures. Wet Ends - Impellers, liners, volutes are made of high-chrome alloy or rubber or polyurethane, to resist wear, corrosion or impact, parts made of metal or rubber are interchangeable.

Single stage, single suction, overhang shaft, centrifugal, double casing horizontal INDUX Slurry pump Material: Casing are made of ductile Iron, ribs help casing to withstand higher pressures. Wet Ends - Impellers, liners, volutes are made of high-chrome alloy or rubber or polyurethane, to resist wear, corrosion or impact, parts made of metal or rubber are interchangeable. Shaft sleeve: Ceramic, tungsten carbide or other hard material are optional for coating, to increase wear resistance. Bearing Assembly- Grease Lubrication and oil lubrication are optional depend on the usage. Seal options - Gland Seal, expeller( centrifugal or dynamic) seal and mechanical seal are optional to fit different application Parts design: Multiple impeller types are available for diverse applications to achieve optimal performance, including high efficiency, high efficiency with lower NPSHr, large particle handling, enhanced performance, flow reduction, and recessed eye options.

The WSA Slurry Pump series is particularly designed for the most aggressive applications like ball and Sag Mill cyclone feed, dredging and all coarse sand slurries and other harsh working conditions. The Mill Circuit Sever Duty Slurry Pump series is particularly designed for the most aggressive applications like ball and Sag Mill cyclone feed, dredging and all coarse sand slurries and other harsh working conditions. The INDUX Slurry Pump are designed to pump highly concentrated slurries and slurries containing large particles which standard slurry pumps cannot deal with effectively. Making use of hard metal impellers & liners or hard metal Impellers combined with elastomer liners are optional in achieving maximum wear life whilst ensuring reduced maintenance costs.

Product Name Electrode Silver Mesh Model Ag>99.99% Density 10.49 g/cm3 Melting 960 ℃  Characteristic Silver wire mesh has excellent ductility, and its conductivity and heat transfer are the highest among all metals. Application Battery collector mesh electrode mesh battery skeleton mesh, experimental materials, high-precision filtration equipment, military manufacturing, aerospace. Contact Information Email:estrellayue@ofolan.com Whatsapp:+86-1 , 3315865785 M.P:+86-13315865785

Minimum Order: 1 bags

Porduct Name Nuclear Grade Zirconium Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Circular Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Wire Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Porduct Name Zirconium Plate Mesh model Zr-1、Zr-3、R60702、R60705 等 Mesh Size 5Mesh-200Mesh Wire diameterthickness 2.0mm-0.03mm Weaving Method Plain Weave, Twill Weave Density 6.49 g/cm3 Melting point 1850 ℃  Characteristic Zirconium wire woven mesh is a high melting point metal woven mesh with a density of 6.49g/cm3, a melting point of 1850 ℃, and a boiling point of 4370 ℃. The surface of pure zirconium mesh is prone to forming an oxide film, which has a metallic luster and therefore has a similar appearance to steel. Zirconium wire mesh has excellent corrosion resistance, and its corrosion resistance is superior to titanium. It is insoluble in hydrofluoric acid and aqua regia. In high-temperature environments, it can react with non-metallic elements and many metallic elements to form solid solution compounds (such as in the preparation of zirconium nitride wire mesh metal matrix composites) Application The amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength of nuclear grade zirconium mesh can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. The purity of the nuclear grade zirconium mesh provided by Oufulang Rare and Precious Alloy Wire Mesh Company is 99.95%. The surface mesh of the product is uniform, without broken wires or loopholes, with amazing corrosion resistance, extremely high melting point, ultra-high hardness and strength. It can be applied in aerospace, military, vacuum high-temperature equipment, petrochemical, pharmaceutical, mechanical manufacturing and other fields. Contact Information M.P:+86-13315865785 Email:estrellayue@ofolan.com WhatsApp:+86-13315865785

Minimum Order: 1 bags

Product Name Sintered Molybdenum Basket Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name Neodymium Iron Boron Sintered Molybdenum Mesh Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name Molybdenum Mesh Disc Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags

Product Name Molybdenum Rhenium Alloy Wire Mesh Model MO1>99.95% Molybdenum Rhenium Alloy Density 10.22 g/cm3 Melting Point 2610 ℃  Characteristic At room temperature, molybdenum mesh is stable in both air and water, and does not work on hydrochloric acid, hydrofluoric acid, dilute nitric acid, and alkaline solutions. 2. When used in a vacuum environment, uncoated molybdenum has a very long service life. Molybdenum is completely stable in pure hydrogen, argon, and helium. Molybdenum does not undergo a chemical reaction with hydrogen until its melting temperature. But when molybdenum is heated in hydrogen gas, it can absorb a portion of the hydrogen gas to form a solid solution. For example, at 1000 ℃, 100 grams of molybdenum metal can dissolve 0.5 cubic centimeters of hydrogen. The application of molybdenum mesh in many electric furnaces fully demonstrates this characteristic. Above 1500 ℃, molybdenum mesh reacts chemically with nitrogen to form nitrides. If the pressure of nitrogen is very low (about 0.01 mmHg), it cannot be seen even at 2400 ℃. Molybdenum mesh still exhibits considerable properties in carbon dioxide, ammonia, and nitrogen up to approximately 1100 ℃. At higher temperatures, nitride films may form on the surface of molybdenum mesh in ammonia and nitrogen gas. At temperatures above 1100 ℃, it can be carbonized by carbon containing gases such as hydrocarbons and carbon monoxide. Application Molybdenum mesh is widely used in vacuum high-temperature furnace sintering of neodymium iron boron support mesh, as a connecting component in corrosion-resistant production, structural components working in high-temperature environments, heating elements, integrated circuits, gas filtration, aerospace, military and other fields.   Contact Information M.P:+86-13315865785 Email:estrellayue@ofola , n.com WhatsApp:+86-13315865785 

Minimum Order: 1 bags