Machinery & Parts

Nickel-based wear-resistant alloy casting Category:Nickel alloy casting Nickel-based wear-resistant alloy casting, its product use environment is more complicated than general wear-resistant cast iron. Common grades are N06002 etc. Product Description Nickel-based wear-resistant alloy casting is to cast nickel-based wear- resistant alloys into products such as valves and pump parts that can be used.It can be used in equipment such as valves, pumps, seals, brakes, etc. in jet aircraft and internal combustion engines. Nickel-based wear-resistant alloy refers to the alloy product, which can not only withstand abrasive wear, adhesive wear and other wear, but also withstand medium corrosion and high temperature oxidation. Therefore, its working environment is more complicated than that of general wear-resistant steel and other materials. Common grades are N06002. Nickel-based wear-resistant alloys also have wear-resistant properties and can also withstand high temperature conditions and corrosion to a certain extent. They are usually used for wear-resistant parts that work in air or low- lubricating liquids, such as atomic energy equipment, petrochemical equipment, and jet aircraft manufacturing. and other industries.

Minimum Order: 10000

Nickel-Based Precision Alloy Casting Category:Nickel alloy casting Nickel-Based Precision Alloy Casting includes nickel-based soft magnetic alloys, nickel-based precision resistance alloys and nickel-based electrothermal alloys. Common grades are N05500 etc. Nickel-Based Precision Alloy Casting is commonly used in the electronics industry, resistors and other fields.In recent years, it has been widely used in the field of environmental protection and energy development, improving the comprehensive performance of the devices used. Nickel-based alloy refers to an alloy with nickel as the basic element and still has high strength and certain oxidation corrosion resistance at high temperature of 650-1000 ° C. Nickel-based precision alloy is one of them, which includes nickel. Base soft magnetic alloy, nickel base precision resistance alloy, etc. https://www.foundryseiko.com

Minimum Order: 10000

Nickel-based shape memory alloy casting Category:Nickel alloy casting Nickel-based shape memory alloy casting is mainly used in aerospace and biomedical fields. Common grades are N06600 etc. Nickel-based shape memory alloy casting usually uses a vacuum induction furnace to smelt the master alloy to ensure the composition and control the gas and impurity content.Shape memory alloys are made of springs and other devices, and can also be used as fire prevention devices. It can also be used in various sensors. Nickel-based shape memory alloys usually refer to nickel-titanium alloys. By changing the proportion of titanium in the alloy, the recovery temperature of the alloy can be different. Because of the characteristics of shape memory alloys, it is widely used in the fields of aerospace and biomedicine. important role. Shape memory alloys have a shape memory effect, which can restore the shape before deformation at a specific temperature. At present, it plays an important role in the aerospace field and is used as an interface sealing function in pipeline transportation. In addition, it also plays a role in medicine, and can be used as artificial bones, spectacle frames and so on. https://www.foundryseiko.com

Minimum Order: 1 bags

Equipment method: --Foot installment, flange installment --Horizontal type, vertical type.Various of motors or double shafts can be equipped Characteristics： 1). Multi-stage transmission can be adopted, and the reduction ratio is larger. 2). Small size, stable operation and low noise. 3). Reasonable design, easy maintenance, easy to disassemble and install. 4). Reduction ratio of 1:87 can be achieved, and the efficiency is above 94% 5). Reliable and hardened (HRC58 ～ 62), so durable and long life. Cycloidal gear reducer is a novel transmission device that uses the principle of planetary transmission and adopts the cycloidal pin tooth meshing, so it is usually also called planetary cycloidal gear reducer. All transmission devices of the cycloid pin gear reducer can be divided into three parts: input part, deceleration part, output part. The machine is divided into horizontal, vertical, double-shaft and direct- connected assembly methods. Its unique stable structure can replace ordinary cylindrical gear reducer and worm gear reducer in many cases. Therefore, the cycloidal gear reducer is widely used in various industries and fields, and is generally welcomed by customers.

Minimum Order: 100

Cast aluminu-silicon alloys Category:Aluminum alloy casting Cast aluminu-silicon alloys is a process in which aluminum-silicon alloys are processed into products that can be directly used through a casting process. Common grades are A356.0, A413.0 and so on. Cast aluminu-silicon alloys is a very important industrial alloy. It has important uses in the automobile manufacturing industry, high-tech electronics industry, aerospace materials and other products, and is an ideal wear-resistant material. Aluminum silicon alloy may be a reasonably ferroalloy with aluminum and silicon because the main components. Generally, the content of silicon is 11%, and atiny low amount of copper, iron and nickel are added to enhance the strength.Aluminum silicon alloy is employed to manufacture low and medium strength castings with complex shapes, like covering, motor shell, bracket, etc. it's also used as brazing solder. When the silicon content is low (such as 0.7), the ductility of aluminum silicon alloy is sweet, which is usually used as deformation alloy. When the silicon content is high (such as 7%), the filling property of aluminum silicon alloy melt is nice, which is usually used as casting alloy. In the Al Si alloy with silicon content exceeding Al Si eutectic point (silicon 12.6%), when the particle content of silicon is as high as 14.5% ~ 25%, adding a specific amount of Ni, Cu, Mg and other elements can improve its comprehensive mechanical properties. https://www.foundryseiko.com

Minimum Order: 1000

Aluminum-zinc alloy casting Category:Aluminum alloy casting Aluminum-zinc alloy casting has good processing performance, and there are common grades such as AC1A and ZA43. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The aluminum-zinc alloy alloy has excellent processing performance, the overall comprehensive performance is close to that of lead brass, the surface treatment effect is good, and it has good electrical conductivity. It can be widely used in electronic and electrical industries. The lower one is added, and it is an environmentally friendly material, which can meet most environmental protection requirements. https://www.foundryseiko.com

Minimum Order: 1000

Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable. https://www.foundryseiko.com

Minimum Order: 1000

Category:Aluminum alloy casting Cast Aluminum-copper alloy can be made into forgings, aerospace structural parts, machined products, and more. Common grades are ZL202 and so on. Cast Aluminum-copper alloy belong to 2xx, x series aluminum alloys, and also belong to ZL-2xx aluminum alloys. Heat resistance, high strength.Can be used for high-power equipment packaging materials, heat dissipation components, ceramics and bases, etc. Aluminum-copper alloy is a kind of hard alloy material, and it also has good electrical conductivity. It has high mechanical properties at room temperature and high temperature, and is easy to cast and cut. We can cast 2011, 2024, 2218, 2618 and other different aluminum-copper alloy products. Aluminum-copper alloys are easy to process and can be made into different profiles. Aluminum-copper alloys are usually made of aluminum-copper multi- component alloys by adding a small amount of other elements to meet the application of aluminum-copper alloys in industry, so that they can be used in different environments. Aluminum-copper alloys can replace copper wires as wires in some cases, and can also be used as aerospace structural parts and so on. https://www.foundryseiko.com

Minimum Order: 1000

Category:Copper alloy casting Copper casting, the copper appears rose red as a whole, and after an oxide film is formed on the surface, it appears purple, so it also called red copper.Copper is often used for electrical, thermal, and corrosion-resistant components. Red copper is also called industrial pure copper. Its appearance is purple, so it is also called red copper. It has good electrical conductivity and thermal conductivity, as well as good plasticity and easy processing. We can produce different grades of copper products such as T1, T2, T3. Red copper is not completely pure copper. Generally, some other elements are added to improve the material properties of the product. Red copper products have good electrical conductivity, so they are widely used in the production of electrical and thermal conductivity equipment, such as motor short-circuit rings, electromagnetic heating inductors, etc. In addition, red copper has good welding performance and can be processed for secondary processing. https://www.foundryseiko.com

Minimum Order: 1 bags

Category:Copper alloy casting Brass casting refers to the use of brass as a raw material and casting into castings that can be used in different fields. Common grades are C2100, C2200 and so on. An alloy generally composed of copper and zinc, known as brass, has a golden yellow appearance. Some other elements can be added to brass to produce special brass that works in different environments. Generally, the hardness and cutting performance of brass products are very good, so they can be processed into different and more refined products. Brass has a small crystallization temperature interval and has better casting properties. Compared with tin bronze, cast brass has better mechanical properties. In addition, the zinc contained in brass leads to lower cost of brass, but also because of The presence of zinc makes cast brass have poor corrosion resistance, and other elements are usually added to brass to enable brass to have some other properties to adapt to work in different environments. https://www.foundryseiko.com

Minimum Order: 100

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this PA6 plastic material has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive industry.  Typical Application of PA6 GF45 (A1011I) PA6 GF45 is used in turbines, propellers, screws, nuts, washers and other components with high rigidity and dimensional stability and heat-resistant aging, as well as fishing tackle reels, racket frames and other components with high mechanical strength, good toughness, higher tensile and compressive strength. Other Details of PA6 GF45 (A1011I) Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ As one of engineering plastic manufacturers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!

Minimum Order: 1000

Specification： Material: black wire, spring steel wire, manganese steel wire and stainless steel wire. Surface treatment: galvanized or painted. Wire diameter: 0.71mm - 12.5mm. Mesh size: 1mm - 100mm. Hole type: square, rectangular and long slot. Weaving type: Plain weave, Pre-crimped, Flat top, Intermediate crimped , Lock crimped. Description： Woven Wire Mesh is manufactured from manganese steel wire, galvanized wire or stainless steel wire. The wires are woven into square, rectangular or long slot meshes.Woven vibrating screen mesh has various weaving types, such as plain weave, pre-crimped weave, flat top, intermediate crimped and lock crimped. Various weaving types can fit different vibrating screens and materials.Woven wire screen is also called quarry/mining screen mesh, screening media, which is widely used in vibrating, scalping and sizing materials of rock, stone, asphalt,quarry,aggregate, limestone, graint etc. Hook Type: Bending. Welding. Metal sheet hook. (C type or U type). Features: High tensile strength. Abrasion and wear resistance. Impact resistance. Acid and alkali resistance. Various weaving types to fit different materials. Different hook types for easy installation and fixation. Application: The woven vibrating screen mesh is widely used in the vibrating screens, crushers and trommel screens. Woven vibrating screen mesh can be used for screening and separating stones, coal, mining, gravel, sand and any other materials. More details contact us: Huatao Group - Tufflex Screen www.tufflexscreen.com /www(dot)tufflexscreen(dot)com Email: maple@huataogroup.com maple(at)huataogroup(dot)com Tel: 0086 0311 80690567 Mob: 0086 181 0331 7488

Minimum Order: 1 bags

Side scraper reclaimer is widely used in cement, building material, coal, power, metallurgy chemical and other industries, it can homogenize a variety of materials, such as bauxite, clay, iron ore, raw coal and other materials with different types and densities, and preblending them in the same stockyard to meet the requirements of different working conditions. Thus, the production process and operation of users are simplified, the technical and economic indexes are improved, and greater economic benefits are obtained. The side scraper reclaimer products of our company have been updated several times. Its arm length range is 11-36m, and the reclaiming capacity range is 30-700t / h. The equipment has unattended function, and the stockyard can realize one key pile change. This equipment has strong adaptability to materials, especially the reclaiming function of side scraper can fundamentally solve the problem of scraping sticky and wet materials. Structure The side scraper reclaimer is mainly composed of walking end beam, frame, winch system, scraper reclaiming system, support frame, lubrication system, track system control room and other components. Technical features ·Adopt advanced design methods, such as computer-aided design, three- dimensional design and optimization design of steel structure. Absorbing advanced technology, together with the experience of designing and manufacturing stacker reclaimer and continuous summary and improvement, we can achieve advanced and reasonable technology and reliable equipment use in the design. ·Advanced production equipment and technological means are adopted to ensure that, for example, the steel pretreatment production line can ensure the improvement of the quality and corrosion resistance of the manufactured products, and the use of large milling and boring machines improves the processing quality of large parts. The whole assembly of large components is performed in the factory, the driving part is tested in the factory, and the rotary part is made by mold. ·Use new materials, such as wear-resistant materials and composite materials. ·External accessories adopt advanced products at domestic and abroad. ·The equipment is provided with various protective measures. ·Advanced testing means and strict quality management system. Product Features · Reliability due to the strict enforcement of design requirement and perfect process technology. · Meet the technology requirements. Adopt advanced design methods, such as CAD, 3D and optimization design of steel structure. · Advancement. The equipment can be fully automated for stacking operations, thus being a highly automated product.

Minimum Order: 1 bags

Customized Stainless Steel Parts Casting Steel Parts For Machinery Precision CNC machining stainless steel-SUS machine parts are becoming the choice for application in many industries due to stainless steel’s excellent physical properties. Stainless steel is one of the most popular industrial alloys for many CNC machining projects. The following benefits have made stainless steel machine parts and products a viable choice for many industries and applications, although they are particularly favored in the medical field. automotive, aerospace, healthcare and consumer electronics. Currently, the best and fastest way to create stainless steel products is CNC machining, especially CNC milling with stainless steel that can reach far and wide. Product Name OEM Custom High Precision Stainless Steel Parts CNC Turning Mechanical Component Material stainless steel, aluminum, copper, iron, PE, PVC, ABS, etc. Surface Treatment Polishing, general/hard oxidation/oxidation, surface chamfering, tempering, , etc. Tolerance丨Surface Roughness +/-0.005 - 0.01mm(Custonize avaiable)丨Ra0.2 - Ra3.2(Custonize avaiable) Technics Turning, Milling, CNC center Drawing Formats PRO/E, Auto CAD, Solid Works , UG, CAD / CAM / CAE, PDF Sample Need to pay sample fee Main Materials Aluminum Al6061, Al6063, Al6082, Al7075, Al2024, Al5052, A380, etc. Stainless Steel SS201,SS301,SS303, SS304, SS316, SS416, etc. Steel Mild Steel, Carbon Steel, 4140, 4340, Q235, Q345B, 20#, 45#, etc. Brass C35600, C36000, C37700, C37000, C37100, C28000, C26000, C24000, C22000, etc. Copper C11000, C12000, C12200, C10100, etc. Iron 20#, 45#, Q235, Q345, Q3458, 1214, 12L14, 1215, etc. Plastic POM, Peek, PMMA, ABS, Delrin, Nylon, PVC, PP, PC, etc Surface Treatment Stainless Steel Brushed and Polishing, Passivating, Sandblasting, Laser engraving, Gold Plating Etc. Steel Zinc plating, Oxide black, Nickel plating, Chrome plating, Carburized, Powder Coated Aluminum Parts Clear Anodized, Color Anodized, Sandblast Anodized, Chemical Film, Brushing, Polishing, Powder Coated, Nickel Plated Etc. Plastic Plating gold (ABS), Painting, Brushing (Acrylic), laser engraving