Mining Machinery Parts

·The body of motor and pump is made of rigid cast iron which can be used for long-lasting durability. ·Greatly increased maximum submersion depth due to mechanical seal resistant to high pressure. ·The impeller and Inlet plate are made of high chrome alloy.The hardness of this material is at least 58 HR, itʼs more durable than other materials. ·Due to the special design of the water passage, the water can make the motor cool down when they pass through the pump body. ·With the vertical outlet design at the top, this pump can be used in smaller space. ·This Submersible Drainage Pump has built-in thermal protection to protect the motor over thousands of times.

Effectively solves the production challenges of long-distance transportation and high-concentration slurry faced by the mining industry. Stable and reliable operation, wear-resistant, and long service life. Compared to traditional slurry pump relay methods, our Long Distance Transport Slurry Pump simplifies installation, maintenance, and operation, significantly reducing costs. MATERIAL Casing are made of ductile Iron, ribs help casing to withstand higher pressures. Wet Ends - Impellers, liners, volutes are made of high-chrome alloy or rubber or polyurethane, to resist wear, corrosion or impact, parts made of metal or rubber are interchangeable.

Single stage, single suction, overhang shaft, centrifugal, double casing horizontal INDUX Slurry pump Material: Casing are made of ductile Iron, ribs help casing to withstand higher pressures. Wet Ends - Impellers, liners, volutes are made of high-chrome alloy or rubber or polyurethane, to resist wear, corrosion or impact, parts made of metal or rubber are interchangeable. Shaft sleeve: Ceramic, tungsten carbide or other hard material are optional for coating, to increase wear resistance. Bearing Assembly- Grease Lubrication and oil lubrication are optional depend on the usage. Seal options - Gland Seal, expeller( centrifugal or dynamic) seal and mechanical seal are optional to fit different application Parts design: Multiple impeller types are available for diverse applications to achieve optimal performance, including high efficiency, high efficiency with lower NPSHr, large particle handling, enhanced performance, flow reduction, and recessed eye options.

The WSA Slurry Pump series is particularly designed for the most aggressive applications like ball and Sag Mill cyclone feed, dredging and all coarse sand slurries and other harsh working conditions. The Mill Circuit Sever Duty Slurry Pump series is particularly designed for the most aggressive applications like ball and Sag Mill cyclone feed, dredging and all coarse sand slurries and other harsh working conditions. The INDUX Slurry Pump are designed to pump highly concentrated slurries and slurries containing large particles which standard slurry pumps cannot deal with effectively. Making use of hard metal impellers & liners or hard metal Impellers combined with elastomer liners are optional in achieving maximum wear life whilst ensuring reduced maintenance costs.

In the field of mining, secondary crushing operations have long faced three major problems: high-risk environment, inefficient operation and rising labor costs. The traditional crushing method has bottlenecks such as big safety risks, low precision and poor adaptability to the environment, YZH row with twenty years of mining machinery R & D accumulation, launched a new generation of stationary mechanical arm crushing system, to reshape the new paradigm of mining crushing with intelligent technology. Core technology innovation matrix 1. Triple control revolution Fully enclosed pressure-resistant cockpit: military-grade explosion-proof design, equipped with air filtration system and shock-absorbing seats, ensures safe operation in extreme environments from -30℃ to 50℃. 100-meter wireless remote control system: IP67 protection certification, supporting precise control in complex terrain. 5G fiber-optic dual-mode intelligent control: delay<10ms, supporting 20km remote operation, realizing “mine-command center” cross-region collaboration. 2. Super performance power combination Customized crushing hammer head: molybdenum steel alloy impact head with hydraulic energy storage technology, crushing efficiency increased by 40%. Intelligent hydraulic system: Equipped with pressure adaptive compensation module, energy consumption is reduced by 25%, and the continuous operation life reaches 8000 hours. 360° omni-directional robot arm: 7-axis linkage design, working radius of 12 meters, covering 95% of mining and rock processing scenarios.Technical Parameters Model number is BB500, working arm weight without hammer 3396kg, max working radius 7400mm, max vertical working radius5360mm, min vertical working radius 2220mm, max height 4300mm, max working depth 5100mm, swinging arm angle 360 degrees. Purchase Notice: Warranty period: 1 year After sales service: During the warranty period, if there are quality issues, we will be available on call Transportation methods: Various transportation methods are accepted Packaging method: Suitable for various types of transportation

YZH provide intelligent solutions for mining, metallurgy, ports and other heavy industry scenarios. Intelligent inspection and blockage clearing: linkage with AI vision system to automatically identify the blockage of jaw breakers, 24-hour standby response aSecond, real-world applications: to crack the bottleneck of industry efficiency 1. Mining Clogging treatment: Remote crushing of boulders stuck in the chute, single operation time ≤ 15 minutes, reducing downtime losses by 70%. Underground safety: explosion-proof design robotic arm replaces manual labor to enter high-risk areas, reducing the annual accident rate by 90%. 2. Metallurgical high temperature zone Unmanned slag clearing: High temperature resistant arm (resistant to 1200℃ radiant heat) with hydraulic rake bucket, realizing automated cleaning of furnace slag. 3. Port Logistics Frozen block crushing: high-frequency crushing hammer handles frozen ore in winter, and the single-day handling capacity jumps from 500 tons to 1,500 tons, avoiding loading and unloading delays. 4. Sand and Aggregate Productionnd 25% increase in production capacity. III. Comprehensive value: data-validated cost reduction and efficiency increase Safety upgrade: Realize “zero manual intervention” in high-risk scenarios, reducing annual injury costs by more than 80%. Economic returns: Comparison of energy consumption: annual power consumption cost of 30,000 yuan for electric motor type, saving 120,000 yuan/year compared with diesel equipment. Manpower replacement: a single unit of equipment can replace the 10-person shift, according to the per capita annual salary of 60,000 yuan, annual savings of 600,000 yuan. Investment payback: standard model (370,000 yuan) payback cycle of 8-14 months, large-scale projects with a comprehensive annual income of more than 2 million yuan. Environmental compliance: Noise ≤ 75 decibels (lower than the national standard limit), dust emissions reduced by 90%, helping enterprises to pass the green mine certification. Service Guarantee: Full-cycle support: from 3D survey modeling to 48 hours of extremely fast

Minimum Order: 1 bags

We are an internationally leading precision manufacturing solution provider with 10 years of manufacturing experience,  focusing on high-precision CNC machining, hardware manufacturing and non-standard parts customization services.  We always regard technological innovation and quality control as the core driving force for the development of the company.

Minimum Order: 200000

YZH Stationary Rockbreaker Booms Shandong Yuanzhengxinghang Machinery Equipment Co., Ltd. specializes in the research, development and production of stationary rockbreaker booms, and its products are widely used in mining, metallurgy, sand and gravel aggregate processing and other fields. Main Features 1. Modular and high strength design The arm consists of hydraulic pump station, rotary support system, big arm and small arm, hydraulic breaker and controller, etc. It supports quick replacement of breaker, bucket, hydraulic drill and other tool heads to meet diversified operational requirements. It adopts high-strength manganese steel welded structure with strong impact resistance, and the internal buffer plate is set up to withstand heavy loads to ensure stable operation under adverse working conditions. 2. Intelligent control and flexibility It supports three operation modes: closed cab, wired or wireless remote control, and 5G light remote control system, which makes the operation precise and convenient. With the ability of multi degree of freedom movement, it can realize accurate positioning and operation in complex space. 3. Energy saving, environmental protection and high efficiency power Adopting 380V/50Hz motor drive, the energy cost is more than 75% lower than the traditional diesel equipment, and the operation noise is low, which is in line with the environmental protection requirements. The core components of the hydraulic system (such as constant pressure variable pump, proportional valve) are mostly imported from Germany, combined with the load feedback technology to realize high energy efficiency and stable output. 4. Adaptability and expandability The length of working arm can be customized (from 1m to 20m), and it supports two types of installation: rotary support type (H-type) and steering cylinder type (Z-type), which can be adapted to different space constraints. Equipped with quick couplings, the tool head can be flexibly replaced to meet a variety of tasks such as crushing, slag clearing, clamping and so on. Typical Application Scenarios 1. Mining and quarry Dealing with crusher inlet blockage, clearing the “tiger mouth” of open-pit mines or underground mines, and improving the efficiency of ore transfer. 2. Metallurgy and Foundry Cleaning of metallurgical slag, removal of ladle liners, and disposal of large metal residues in foundries. 3. Sand and Aggregate Processing Assist in handling oversized boulders alongside crushing plants or mobile crushers to optimize the aggregate production process. Core Advantages 1. Safety Improvement Remote control function reduces workers' exposure to high-risk environments and reduces the risk of accidents, especially for underground or high- temperature operation scenarios. 2. Remarkable economic benefits Although the initial investment is high, the long-term operation can reduce labor costs, maintenance costs and energy consumption expenses, the overall cost-effective than traditional blasting or manual cleaning. 3. multiply production efficiency A single machine can replace more than one person, processing hard rock (such as granite, limestone) to improve efficiency, shorten downtime, to ensure continuous production. 4. Environmental protection and sustainability Electric drive reduces carbon emissions, low noise design improves the working environment, in line with the development of green mines.

Minimum Order: 1 bags

The cable clamp for coal mining machine is made of stamped steel plate as the skeleton and high-density polyethylene through injection molding. According to the needs of the coal mining machine working face, it is connected by special bolts to form a protective channel for protecting cables or water pipes. The products mainly include three types: U-type, H-type and O-type. It overcomes the low mechanical strength and lack of effective protection on both sides of traditional cable clamps. When the cable is running in the towing cable trough with the cable clamp, it is easy to be worn and squeezed by the gangue and coal blocks in the trough, the guiding effect is not ideal, and it is easy to hang and break. It can overcome the common causes of cable damage such as "pulling", "folding", "hanging", "smashing" and "squeezing", and can provide all-round protection for cables and water pipes. https://www.langno.com/cable-cleats/

Applicable to underground and ground coal mines containing explosive gas and coal dust: There are a large number of flammable and explosive components such as gas dust in coal mines, and there are many metal equipment and instruments. When the equipment is moved and used, it is very likely to collide with the cable hook, which will produce sparks and lead to explosions. However, the mining cable hook will not collide with the metal equipment to produce sparks when in use, ensuring the safety of underground coal mines. It is suitable for low-gas mines with an altitude of +1150m-1800m, an ambient temperature of -20℃ ～+45℃, and an earthquake fortification intensity of VIII. Major advantage Corrosion resistance: The flame retardant, corrosion resistant and antistatic materials are evenly distributed in the body of the mining cable hook, and the antistatic and flame retardant properties meet the coal mining industry standards. The humid and harsh environment underground will cause the steel cable hook to corrode and rust, which will increase the friction of the hook, resulting in increased friction, sparks are easily generated during friction, leading to combustion or even explosion. Due to its material characteristics, the mining cable hook can effectively avoid the above safety problems and is more suitable for the flammable and explosive working environment underground. Lightweight and easy to install: The steel cable hook is heavy, which will increase the labor intensity of workers and reduce work efficiency during use. The mining cable hook has low density, light weight, low cost, easy transportation and installation, durable and long service life. When used for underground installation, it can not only reduce the labor intensity of workers and improve work efficiency, but also reduce the overall cost of the project. Anti-aging and strong bearing capacity: The mining cable hook has good anti- aging performance due to the advantages of raw materials. It is not easy to become brittle in a humid environment and has good toughness. It absorbs impact force and can resist repeated impact. The maximum breaking force is not less than 3500N, and it has strong bearing capacity and can withstand loads for a long time. The force is not less than 160kg . When the arc hook bears a load of 50kg, the deflection of the straight rod section is less than 10mm. Compared with other hooks on the market, our company's hooks are slightly heavier and have better bearing capacity. Stable chemical properties: The mining cable hook is made of PVC material, and the flame retardant, corrosion resistant and antistatic materials are evenly distributed in the body. It has stable chemical properties and is resistant to alkali, alcohol, ether, hydrocarbons, weak acids, lubricants, detergents, water, etc. It is odorless, non-toxic, tasteless, and rust-free. It can be used in a variety of environments without changing the performance of the product itself. Low hardness: The hardness of the mining cable hook is lower than that of the metal hook, and will not cause damage to the cable when laying the cable. Anti-static: The arithmetic mean of the surface resistance of the upper and lower surfaces of the mining cable hook is ≤3×108 Ω. Flame retardant: The average value of the flame burning time of the alcohol burner of the mining cable hook is ≤3.00s, and the maximum value of the flame burning time is ≤10.00s; the average value of the flameless burning time is ≤10.00s, and the maximum value of the flameless burning time is ≤30.00s; the flame extension length after burning is ≤280mm. The average value of the alcohol lamp with flame burning time of the mining cable hook is ≤6.00s, and the maximum value of the flame burning time is ≤12.00s; the average value of the flameless burning time is ≤20.00s, and the maximum value of the flameless burning time is ≤60.00s; the flame extension length after combustion is ≤250mm. Wear-resistant and long service life: The mining cable hook has strong wear resistance. During use, it will not be worn due to friction and other problems. It can maintain working performance for a long time. Under normal use conditions, the service life can reach 50 years.

Piston rod seal, double-lip design has better sealing effect, and polyacetal back-up ring is better under pressure. The 0-ring has a preloading effect, making the groove embedding more stable, and can be applied to higher pressures and allow larger extrusion gaps, high Under low pressure conditions, the sealing effect is equally significant. Rod seal, single function, embedded groove stability, special structural design; high pressure resistance, allows larger extrusion clearance. Working condition pressure: ≤70Mpa speed: ≤0.5m/s temperature: -40℃～+110℃ Medium: hydraulic oil, emulsion, water Maximum extrusion clearance pressure: Mpa 16～130 Maximum extrusion clearance(mm): 0.75～0.25 The surface roughness The surface of the cylinder: φd1  0.1-0.4 μm Ra The static sealing surface: φD1  1.6max μm Ra Static groove surface: L1  3.2max μm Ra Cant & chamfering Groove part: ≤ S (mm)  6, 8, 10, 11, 12 Minimum slope: C (mm)  4, 5, 6, 7, 8 Maximum amount of chamfering: r1 (mm)  0.2,0.2, 0.4, 0.4, 0.5 The biggest outer diagonal: r2 (mm)  0.5, 0.5, 0.5, 0.5, 0.5 Standard material sealing member: PU elastomer: NBR POM (Support ring: POM More about Langnuo

The piston seal is a two-way seal, used in conjunction with two piston guide rings, and has a two-way sealing effect. It is wear-resistant, high-pressure- resistant, has good sealing performance, and is easy to install. It is used for double seals of pistons in reciprocating hydraulic cylinders and multiple groups of hydraulic cylinders. It is an ideal seal in mining support. Langnuo seal Product features Low friction, even holding a long time, the campaign starting and moving smoothly; Static and dynamic sealing performance is very good; Easy to install; Material parameters Sealing ring material:PU98A-68H136 HFA fluid/water:-30℃~+100℃ pressure:≤40Mpa Linear velocity:≤0.5m/s O-Ring P-material:NBR 70A-98C117 HFA fluid/water:-30℃~+100℃ pressure:≤40Mpa Linear velocity:≤0.5m/s https://www.langno.com/

Non-metal rollers refer to industrial conveyor rollers made of non-metallic materials. Compared with traditional metal rollers, non-metal conveyor rollers have the advantages of flame retardancy, light weight, corrosion resistance, wear resistance, and low noise, so they have been widely used in modern industrial production.  The emergence of bulk non-metal rollers not only improves the operating efficiency of the conveyor belt system, but also reduces maintenance costs, providing strong support for the sustainable development of enterprises. In modern industrial production, high temperature rollers are important material conveying equipment, and their performance and quality directly affect production efficiency and economic benefits. In recent years, non-metal mining conveyor rollers have gradually occupied a place in the market with their unique technical advantages and product advantages, and have become the first choice of many companies. Major advantage Non-metallic oil-free rollers are a new generation of high-tech industrial mining supply developed by our company that use plastics instead of steel. The technical advantages are: a. The tube body is made of polymer composite material, which has the advantages of flame retardancy, high wear resistance, long life, non-magnetic, no adsorption of iron powder, dust and various sticky substances, low friction coefficient with the belt, self-lubricating, etc., which greatly avoids the defects of steel rollers and ceramic rollers, thereby greatly extending the service life of the belt and avoiding damage to the belt ; b. The design of non-metal rollers fully considers the use environment and user needs. It adopts an embedded combination design, which enables the roller to maintain better stability when bearing loads. At the same time, the bearing seat of the non-metal roller is closely connected to the cylinder, with a large load-bearing capacity, avoiding the problem of separation and scratching the belt during work, and improving work efficiency. In addition, the bearing seat of the non-metal roller is made of special materials, which is non-heat- conductive and high-temperature resistant, further improving the performance and safety of the product. The sealing structure adopts a double labyrinth design (after immersion test, the water inflow is almost zero) and precision assembly, which completely isolates the bearing from the outside world. It can effectively protect the bearing for long-term and continuous operation, and avoid dry grinding of the belt and roller skin caused by the bearing being contaminated and not rotating. At the same time, it replaces the traditional welding process, improves the concentricity, makes the equipment run more smoothly, and extends the service life of the roller. d bearing is a fully sealed maintenance-free bearing specially used for rollers, which has the advantages of flexible operation, long life and maintenance-free. Main function The main function of Langnuo non-metallic rollers is to support and transport materials. In the conveyor belt system, rollers are responsible for supporting the conveyor belt and keeping it running smoothly. With their excellent wear resistance and corrosion resistance, non-metallic rollers can ensure that the conveyor belt can still run stably in harsh environments and reduce the possibility of failure. At the same time, the lightweight design of non- metallic rollers also reduces the energy consumption of the entire system and improves energy efficiency.

Cast Iron Box Table / Box Cube used as a workholding device to clamp and hold workpieces in the vertical position and as a vertical reference for inspection and tooling purposes in workshop machining processes such as shaping, planing, boring, milling, grinding and drilling, etc. They are also used to clamp motors, engines, transmissions etc. to carry out the assembly, tests, or inspections. Especially they are widely used to clamp workpieces on horizontal boring mills or drilling presses. With its multiple clamping surfaces, the box cube can clamp multiple workpieces on its different clamping surfaces, reducing the time spent on setting up of workpieces. The types of tables / cubes are available as being T-slotted, elongated-hole- slotted and tapped with threaded holes. The designs of these tables / cubes are always customized as per their actual applications. The tables / cubes are made of gray cast iron GG-20, GG-25 or GG-30, which display good abrasion resistance, tensile strength and mechanical properties. The flatness accuracy machined to DIN876 and T-slots machined to DIN650. Sizes of cubes are as per customer's request. Any sizes can be provided, including very large heavy duty cubes used as workholding device for floor type milling and boring machines.

Minimum Order: 1 bags