Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Motors & Parts


Home > Offers to Sell > Electronics & Electrical > Motors & Parts

Browse leads by category:
    
    
  
 

Summary of 3/29/24 7:20 GMT:>> Show Compact View
3/29/24 6:58 GMT
Xiongcai E3 Motor Controller Engineered For Ultimate Handling Experience

Xiongcai E3 motor controller (ESC) with 400A, 12S, 54V Power System For R/C Model Car and Truck Ultimate Handling Experience The Xiongcai E3 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for high-level R/C car sport. 6-12S Lipo, 400A continuous current, 54V, suitable for sensored or sensorless brushless motor,  supporting  240,000 RPM motor. Smart controlled fan provides excellent thermal performance, it will be turned on or off according to internal temperature by motor controller (ESC). The parameters can be adjusted up to driver's handling level. The power system will push your vehicles to their limit and beyond. MAYBE it’s one of the most powerful electronic speed controller ever in field of R/C car and truck. Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures. 1. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. 2. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec. 3. The brake force and reverse force is programmable for enhancing drivability. 4. Thermal performance is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the airflow throughout the system and cool down critical components, keeping your vehicle working at optimal condition. You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 ESC will promote the performance to a new level. Xiongcai Tech has been specializing the ESC design and manufacture for 15 years, and committed to promote drivability of R/C model cars. We are professional and trusted, our parts are imported by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visit http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we are ready to put your R/C cars and trucks in extreme.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:58 GMT
400A,12S, 54V Powerful Motor Controller ESC Put Your 1: 8 RC Car In Extreme

Xiongcai E3 electronic speed controller (ESC) with 400A, 12S, 54V Power System Make A Difference For R/C Model Car and Truck The Xiongcai E3 electronic speed controller (ESC, motor controller) is packed with a potent combination of hardware and software advancements, engineered for 1:8, 1:6 R/C car. Xiongcai tends to be at the leading edge of technological development of motor control, our team is trustable, so is the product.  Our motor controller for automotive electronics are applied by top brands in auto industry such as NISSAN, XPeng, FAW Group, FAWDE, Jingyi Group, Feilong Auto Parts, Shenhai Electrical Appliance, Huirun Electrical Machinery and more. You can experience the performance and handling of electronic speed controller on RC car. 12S, 400A continuous current, 54V, the power system will push your vehicles to their limit and beyond. MAYBE it’s the most powerful ever in motor control of R/C car and truck. The forged heatsink integrated fan provides excellent thermal performance, allowing airflow throughout the system, cooling critical components. Even Xiongcai E3 ESC is a power monster, it is still under control. For the safety, Xiongcai team designed excellent protection measures. 1. Low voltage and over voltage protection. The ESC will monitor batteries all the time, once the voltage is lower than preset value, the power will be reduced immediately and be cut off in a few seconds. 2. BEC voltage is optional 6v/7.4v/8.4v, up to your servo spec. The brake force and reverse force is programmable for enhancing drivability. 3. Thermal performance is meticulously designed. Fan is smart controlled. When the internal temperature exceeds 55 degree, the fan will be turned on by electronic speed controller, keeping your vehicle working at optimal condition; When the temperature is low than 50, the fan will be turned off. When there is an abnormal heavy current or short circuit occured, the test mode will be activated. If the supply is still abnormal after three-time test, electronic speed controller will cut off the supply to fan, and ESC can work normally. You can tune the parameters of ESC for different driving condition, from rugged terrains to pavement, off-road or on-road, Xiongcai E3 ESC will promote the performance to a new level, providing ultimate handling experience. Xiongcai Tech has been specializing the ESC design and manufacture for 15 years, and committed to promote drivability of R/C model cars. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visite http://en.xc-bldc.com, we are ready to put your R/C cars and trucks in extreme.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:58 GMT
Xiongcai Motor Controller Powers Stryker7 Bone Drill As Originals

Xiongcai Motor Controller Applying To Strker #6,#7,#8 Bone Drill Xiongcai Technology has been specializing in motor control since 2011, with a decade’s experience, our products are suitable for many medical equipment, especially applying to bone drills, draw saws. In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire motor controller. He said he ran maintenance business on Stryker bone drills, especially the Stryker6/7/8. Actually we do have some types of electronic speed controller for bone drill application, providing equivalent performance. The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all. We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not matched precisely. The distance of triggers are not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best. We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 electronic speed controller, which met devices precisely. The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best. Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering quality products to clients. Contact us and have a try http://en.xc-bldc.com or search Shenzhen Xiongcai Technology Co., Ltd, we will assist you with efficient motor control.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:57 GMT
Xiongcai Electronic Speed Controller Make Tooth Repair Tool More Reliable

Electronic speed controller XC401 is engineered for tooth repair tools, keeping your device working steadily. This product (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER, PEDAL TYPES.   The 8A,15-40v power system will push your vehicles to their limit and beyond. Xiongcai electronic speed controller has been applied to Stryker #6#7#8 already as replacement since 2015, there are no serious complaints yet. Xiongcai XC401 ESC is powerful, for medical use,  our team designed a serials of protection measures to ensure reliability and safety. 1. Low voltage and over voltage protection. The ESC will monitor power all the time, once the voltage varies dramatically, ESC will cut off the power. 2. Speed is adjustable from 1000RPM to 50000RPM. 3. Thermal performance is meticulously designed. With the integration of a forged Al heatsink, the design maximizes the thermal transfer throughout the system and cool down critical components, keeping your vehicle working at optimal condition. Parts are certified by, CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637, you don't need to worry about the reliability and safety. Xiongcai XC401 ESC will promote the performance to a new level. Xiongcai Tech has been specializing the ESC design and manufacture for 15 years. We are one of the few engineering companies providing a full service from design to supply of product, which means we design, analyze, test and supply finished products. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visit http://en.xc-bldc.com, we are ready to put your device in its best.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:57 GMT
XC303 Electronic Speed Controller Designed For Bone Drill And Stryker678

Xiongcai XC303 electronic speed controller (ESC) is engineered for medical bone drill speed control, also it is suitable for Stryker bone drill. The Xiongcai XC303 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER, PEDAL TYPES. The power system of 30A, 7.2v-16.8v, this product will promote performance of your vehicle. Integrating an Al case in dimension 76.5*39.4*13.5mm, it can be inserted into handle of bone drill, what you need to do is ensuring the following items complying with our specification: a) this product can be inserted into handle and fixed with our any loose; b) The magnets fixed on the trigger align with Hall Sensors; c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic fiel and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill). A Brazil client contacted us and inquired about electronic speed comtroller several months ago. He said he wanted to buy controller for Skryker#6,#7,#8. He saw a lot of damaged Stryker bone brill being abandoned because no contollers for maintenance. He doubted and said we bought some electronic speed controller from other suppliers, but some of them could not be installed properly and some of them could not run at their best. I showed hem the specification and told him to pay attention to the items I mentioned above. After checking the details, he understood why the produts he bought before didn't work well, because the range of magnets was not precise, the magnetic field was unsteady. I told him samples are charged, but expense could be refunded when he placed order for massive production. He bought 10 samples for test. One month later, he came back to me and said the test was successful, Stryker bone drill worked very well as orginial. Last week, he ordered a batch of electronic speed controller for his maintenance business. We designed a series of protection measures to make sure that the products can run steadily and safe. Protection measures includes under voltage, over voltage, over current, over temperature, blocking, short circuit protection, etc. Furthermore, this product is certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. You don’t need to worry about the reliability. Xiongcai electronic speed controllers have been applied to many top brands such as NISSAN, XPeng, Jingyi Group, ACHR, FAW Group, FAWDE, Shenhai Electrical Appliances, Kesen, Cummins and more. XC303 ESC will promote the performance to a new level. Xiongcai Tech has been specializing the ESC design and manufacture for 15 years, and committed to promote perfornance or your devices. Our team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visit http://en.xc-bldc.com or google Shenzhen Xiongcai Technology, we are ready to put your device in its best.

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:57 GMT
30A, 16.8V ESC Electronic Speed Controller For Medical Foot Pedal Tool

Xiongcai XC302 electronic speed controller (ESC) is engineered for medical pedal tool use. Xiongcai Tech has been specializing the electronic speed controller design and manufacture for 15 years, and committed to promoting performance of your devices. The Xiongcai XC302 electronic speed controller (ESC, motor controller) is packed with a potent combination of hardware and software advancements, engineered for MECIAL DEVICES SUCH AS BONE DRILL, GRINDER, PEDAL TYPES. This product is supplied in forged Al case, what you need to do is inserting it into the housing. But you still need to pay attention to the installation dimension and the sensoring range. With power system of 30A current, 7.2-16.8V, this electronic speed controller will push performance of your tool to a new level. a) this product can be inserted into handle and fixed with our any loose; b) The magnets fixed on the trigger align with Hall Sensors; c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic fiel and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill). This product is highly reliable and certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. And we design many protection measures include under voltage, over voltage, over current, over temperature, blocking, short circuit protection, etc, making sure product working at its best. You can tune the parameters of ESC for different condition, Xiongcai XC302 ESC will promote the performance to a new level. Xiongcai Tech has been specializing the electronic speed controller design and manufacture for 15 years, and committed to promote performance of your devices to a new level. Xiongcai team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try. visit http://en.xc-bldc.com, we are ready to put your device in its best.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:56 GMT
Electronic Speed Controller 30A,16.8V Ideal For Medical Bone Drill Draw Saw

Xiongcai XC301 Electronic Speed Controller (ESC) with 30A,16.8V Power System The Xiongcai XC301 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER. Xiongcai Tech has been specializing the ESC design and manufacture for 15 years, and parts are certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. You don’t need to worry about the quality and reliability. 30A continuous current,7.2V-16.8V, the power system will promote performance of your vehicles to a whole new level. This is a ready-to-use kit, you just need to check the installation dimension and distance between the magnets fixed on triggers and Hall sensors. 1. If it can be installed into your bone strill perfectly without any loose. 2. Whether the magnets on the triggers can be aglined with the sensors in our XC301. 3. We'll provide magnets, please check whether the magnets can be intalled into your triggers. 4. Ensure that the distance between the magnet on the trigger and XC301 meets the requirements stated in the specsheet. That is, when there is no external force acting on the triggers, the horizontal distance between the magnet and XC301 is more than 5.5mm (this ensures that the hall sensors have not receive the magnetic field signal, so that the motor remains stop). When the trigger is pressed down to the end, the minimum distance can reach 0 mm (this ensures that the motor can reach its maximum speed) If the spec meet your tools, It's great, you can use it without any modification and doubt. This electronic speed controller is suitable for Stryker#6#7#8 bone drill too, if you need any replacement, it's a good choice. Xiongcai is serving top clients in multitude of industries, medical device, automotive electronics, drones and RC car. Products are applying to automotive fuel pump, water pump, medical devices, electrical tool, we are partnering with top clients in their lines, ACHR, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Contact us and have a try. visit http://en.xc-bldc.com, we are ready to put your device in its best.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:56 GMT
Why Xiongcai 400A Electronic Speed Controller Driver Is Better Than Rivals

400A, DC16-54V Electronic Speed Controller / Driver Designed For High- performance RC Car, You Can Feel The Ultimate Handling Since 2011, Xiongcai has been manufacturing electronic speed controller/driver for automotive fuel & water pumps, electrical tools. Our products have been applying in automotive industries and drones, adopting by clients such as XPeng, NISSAN, Feilong Auto Component (FLACC), Shenhai Electrical Appliance, ACHR, Risun, Joinhands, Keshen, Wuhan Cummins, FAW Group, Jingyi Group, Linrui Auto Electrical Appliance, Unicent, and more. In 2017, we had set a sector for RC cars. In these years, we have earned ourselves a place in the severe competition with top brands such as Castle and Hobbywing. In 2024, we engineered a new power monster-E3. E3 is a powerful product which is engineered for enthusiasts’ RC cars and trucks. Six months ago, a notable RC car brand contacted us and consulted about technical problems. They wanted to develop a most powerful electronic speed controller ever in RC car industry. Comparing to existing products, E3 is really a power monster. E3 is high performance with 400A continuous current, 6-12S Lipo, 16-54v power system, as I know, maybe it’s the most powerful motor controller (electronic speed controller or ESC) adopting to sensored or sensorless brushless motor, and supporting 240,000RPM maximum. BEC power is optional (6.0V, 7.4V, 8.4V), providing 10A continuous current, you can select it according the servo specification. We know that thermal management is important to a powerful electronic device. We design the frame meticulously. With the combination of forged Al case and fin fan, E3 allows max airflow throughout the part to cool critical component down, promoting thermal performance to a new level. With epoxy potted, waterproof design will protect electronics and promote heat dissipation in all weather conditions. Fan is controlled intelligently by ESC. When the internal temperature of system exceeds 55 Celsius Degree, the fan will be turned on, otherwise, the fan will be turned off. If there is an abnormal heavy current, the ESC will cut off the power to fan, and the ESC will work normally. Many parameters related to handling can be adjusted by mobile app via Bluetooth communication, such as running mode, number of Li-Po cell, cutoff voltage, throttle rate, braking force, turbo timing, initial PWM, etc. and firmware can be managed on app as well. Power is one thing, the most important is how can we control it perfect to avoid negative impact? We have designed many protection measures including low voltage, throttle loss, abnormal braking, over temperature, short circuit to fan, and so on. We need performance, also we need safety. We have been staying focused on design and manufacture of electronic speed controller for 13 years, serving top clients in their industries. Parts are certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. We provide a full service from design, analysis, testing to supply, you don’t need to worry about the quality and reliability. Have a try, visit us http://en.xc-bldc.com or google Shenzhen Xiongcai Technology for detail. If you have any special concept or requirement, we will help you achieve your ideas.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:56 GMT
E3 BLDC Brushless Motor Speed Controller For Ultimate Experience of RC Cars

Xiongcai BLDC Brushless Electronic Speed Controller for RC Models Cars-- Full- featured, Easy-to-use and Performance Do you think electronic speed controller for RC car is difficult to handle, because what you see is just a tiny black case, how can you manage it? Xiongcai Technology help you manage it easily. “Drive motor more efficiently” is our motto. We committed to making full- featured, performance and easy-to-use electronic speed controller. For example, XC201-E3, a BLDC Brushless motor speed controller which we designed for a top RC hobby products supplier, is high-performance and easy to use. Current 400A continuous current, 800A short circuit protection. Wave-by-wave current limiting will control the peak current avoiding damage to motor and prolonging service life of power system. Power 6-12S Li-po. When DC is applied, discharge capacity and RBS should be considered. BEC Built in powerful DCDC conversion circuit provides potent loading capacity for BEC. BEC provides 6.0V, 7.4V, 8.4V options and 10A continuous current, 25A peak, select the one that is suitable for servo. Fan is powered by BEC and controlled by ESC. Fan will be turned on when temperature is above 55 degree, and it will sit idle when internal temperature is below 50 degree. Bluetooth Communication Static data (ESC records) and real-time running data will be monitored on the mobile app, everything is under control. You also can manage parameter setting and firmware upgrade on the App. Precise Active Free-wheeling Original creative freewheeling identification technology achieves microsecond response for precise active free-wheeling, reducing heat of MOS dramatically. The results are cooler ESC temperature, longer runtime and high performance. Turbo Timing This item can be adjusted from 0 degree to 26 degree. It’s usually activated at full throttle on straightway to unleash extra high performance. Protection Measure Multiprotection measures have been designed, under voltage, throttle loss, abnormal braking, over temperature, short circuit, abnormal Hall sensing etc… Acceleration 12 grades acceleration gives you unique experience from regular start to quick start, even launch control. Before you set this item, you should completely consider the ground, gripping ability of tires, vehicle configuration etc. Maybe you can’t experience launch control in reality, but you enjoy it through your RC cars. Ignite your passion, enjoy the driving. There are more configurations you can set on App for better handling experience, such as Running Mode Forward with brake. This mode is designed for racing with forward and brake function only. Forward and reverse with brake. It’s ideal for training. It brakes on the first time you push the throttle trigger to the reverse/brake zone. If the motor stops when the throttle trigger return to the neutral zone and then re- push the trigger to reverse zone, the vehicle will reverse, if the motor does not completely stop, then your vehicle won’t reverse but still brake, you need to return the throttle trigger to the neutral zone and push it to reverse zone again. This method is for preventing vehicle from being accidentally reversed. Forward and reverse. The motor will reverse immediately when the throttle is pushed to the reverse zone. This mode is often used by special vehicles. Li-po Cells ESC will identify the Li-po cells, or you can set the count manually. Cutoff Voltage This item prevents excessive discharge of Li-po batteries from causing damage to batteries. The ESC will monitor batteries all the time, once the voltage is lower than threshold value, the power will be cut off in seconds with a 10% braking force. For NiMH batteries, “Disable” is recommended. Motor Rotation For setting rotation of motor. Due to different chassis design, the vehicle may reverse despite be given forward throttle. In this case, you need to set “motor rotation” to the opposite direction. Max. Braking Force This ESC provides proportional braking function. The braking force is up to the position of throttle trigger. It sets the percentage of available braking power when full brake is applied. Max. Reverse Force It refers to reverse speed. Applying different value can generate different reverse speed, it is recommended to use a relatively small reverse speed to avoid errors caused by reversing too quickly. Drag Brake Force Refers to the brake force generated by the motor when the throttle trigger returns to neutral position. Choose the appropriate value according to the type of vehicle, configuration, site, etc Turbo Timing The Turbo timing can additionally increase the motor rpm. It will be initiated at full throttle. It is usually used on a long straight road to release the maximum power of the motor. The higher this value is, the more the rpm of the motor will increase, and the greater the running current will be, the higher the temperature of the motor and esc. Therefore, please set this value reasonably. Turbo Delay It refers to the duration of continuous full throttle required to trigger Turbo. When the full throttle time reaches this set value, Turbo can be triggered. Initial PWM Minimum starting force. It refers to the starting force acting on the motor at the initial position of the throttle. The required starting force can be set according to the tires and site grip. If the venue is too slippery, set a smaller starting force to avoid slipping. If you have went through this article, you will find electronic speed controller (ESC) is easy to set, you can practice by setting every item. Xiongcai Technology has been contributing its expertise to specialized field of motor control since 2011. Parts have been adopted by NISSAN, XPeng, FAW Group, Jingyi Group, Cummins, Feilong Automotive Component, and more. Contact us now sales7@xc-bldc.com, you are worth a better motor control solution.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:55 GMT
E10 Electronic Speed Controller Is One of Most Reliable ESCs

Engaging in electronic speed controller for automotive fuel & water pumps, electrical tools for 13 years, we are one of the few manufacturers that focus on electronic speed controller only. 1. Current: Continuous current 140A, peak 300A 2. Output: 2-4s Li-Po 3. Motor: Sensored or sensorless brushless motor 4. Speed: <240,000RPM 5. BEC: 6.0V, 7.4V, continuous current 5A, peak 10A 6. Bluetooth: Parameter setting, firmware upgrade 7. Dimension: 52.8*9.8*35.3mm We dedicate to designing reliable and powerful electronic speed controller for Hobby products such as RC cars, boats, planes in addition to manufacturing controllers for automotive fuel pump & water pumps, electric tools and drones. Besides the potent E3-the one which was designed for ultimate experience of a 1:8th even 1:6th RC cars, we designed several mild ones. Here I introduce E10 electronic speed controller to you. Even E10 is the mildest one in this product family, with power of 2-4S Li-Po batteries, 140A continuous current, it will generate fierce power. Like the super car, the launch control start will get you excited. There are 12 grade acceleration from 1% to 12%, you can adjust it according to your skill. This electronic speed controller is applicable to both sensored or sensorless brushless motor, we provide bespoke service. What we do is help you achieve your ideas. It supports max motor speed of 240,000RPM. In another word, you must ensure that the motor speed does not exceed 240,000RPM to avoid any damage to both ESC and motor. BEC output is optional, 6.0V or 7.4V, the current is 5A continuous and 10A peak. Which is much more proper? It’s up to your servo specification, for body safety and device safety, please read it carefully. An excellent thermal management is essential to a powerful electronic system. With the integration of fan and forged Al heatsink, E10 electronic speed controller maximizes airflow throughout the system, cooling critical component for high-performance and longer runtime. The fan is controlled by ESC according to internal temperature. For instance, fan will be turn on when temperature is above 55 degree, and it will be turn off if the temperature is below 50 degree. All configurations can be done on mobile app via Bluetooth, running mode, acceleration, braking force, turbo timing, initial PWM etc. It is ideal for training, you can familiarize function and features step by step. For safety, we have designed a series of protection measures including low voltage, over voltage, over temperature, throttle loss, abnormal braking, short circuit protection and so on. You don’t need to worry about quality and reliability. You just feel drivability, handling and enjoy the racing, we take care of the rest. Our products have been verified in automotive industries and drones, adopting by clients such as NISSAN, Xpeng, Feilong Auto Component (FLACC), Shenhai Electrical Appliance, ACHR, Risun, Joinhands, Keshen, Wuhan Cummins, FAW Group, Jingyi Group, Linrui Auto Electrical Appliance, Unicent, and more. Parts are certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. We provide a full service from design, analysis, testing to supply, you don’t need to worry about the quality and reliability. Contact us and have a try. If you have any special concept or requirement, we will help you achieve your ideas.

Minimum Order: 300

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:55 GMT
E8 Electronic Speed Controller (ESC)-Let You Enjoy Power and Reliability

E8 Electronic Speed Controller-Let You Enjoy Power and Reliability 1. Current: Continuous current 160A, peak 320A 2. Cell: 3-6s Li-Po 3. Motor: Sensored or sensorless brushless motor 4. Speed: <240,000RPM 5. BEC: 6.0V, 7.4V, 8.4V, continuous current 6A, peak 15A 6. Bluetooth: Parameter programming, firmware upgrade 7. Acceleration: 12 levels of acceleration, quick start like super car 8. Dimension: 59.8*48.2*35.9mm E8 electronic speed controller (ESC) is the third one of the six we released for RC cars and trucks. This brushless system is packed with an integration of compact hardware, advanced software and waterproof design that will promote handling experience dramatically. Combination of forged Al heatsink, case integrates and a 40mm fan, the E8 ESC will maximize airflow throughout the system, taking thermal performance to next level, allowing ESC working at its optimal. The E8 electronic speed controller can handle 3-6s Li-Po batteries with continuous current 160A, adjustable BEC 6.0v-8.4v, continuous current 6A, so it can deal with anything that motor pours out. Thanks to our designers’ software advancement works, this ESC matches most of motors on market, you don’t need to worry about the compatibility. You are able to do any stunts you dream of in racing or show. We have designed perfect protections secure your favorite RC car while endowing the ESC potent power handling. Protections includes low voltage, throttle loss, abnormal braking, over temperature etc. Especially, we have applied active free-wheeling and wave-by-wave current limiting on this product, which is only used on high-end product. The active free-wheeling with precise identification can provide microsecond level track and response time, reducing MOS generating heat effectively to keep ESC cool for ultra-high performance. The wave-by-wave current limiting will limit each wave of current to secure motor and drivetrain, prolonging lifespan of power system. This electronic speed controller is full featured and easy to use. Most of parameters can be programmed on mobile app via Bluetooth, such running mode, BEC output, brake force, acceleration, turbo timing and more. Especially, we designed 12 levels of acceleration, you can set it according to your skill, also you can use it for training. You can feel the quick start like the super car. We have been engaging in BLDC brushless electronic speed controller since 2011, we provide a full service from design, analysis, test to supply. You just enjoy the handling experience of RC cars or trucks, we take care of the rest. Contact us now and have a try, you will feel the ultimate handling experience.

Minimum Order: 100

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:55 GMT
Speed Controller For RC Hobbies With Excellent Reliability and Performance

Why does Xiongcai E8 Electronic Speed Controller Ensure Power System a Longer Service Life? 1. Current: Continuous current 160A, peak 320A 2. Output: 3-6s Li-Po 3. Motor: Sensored or sensorless brushless motor 4. Speed: <240,000RPM 5. BEC: 6.0V, 7.4V, 8.4V, continuous current 6A, peak 15A 6. Bluetooth: Parameter programming, firmware upgrade 7. Acceleration: 12 levels of acceleration, quick start like super car 8. Dimension: 59.8*48.2*35.9mm With power system of 160A continuous current, 320A peak, 3-6s Li-Po, E8 electronic speed controller (ESC) is stronger enough to power 1:10th, 1:8th scale RC cars and trucks. It can deal with anything that your motor pours out, you will be able to do any stunts you dream of. Maybe you will say a lot of ESCs can support you in doing any stunts or trick in air. Yes, exactly, many electronic speed controllers (ESC) can support this, but what you need to know is that the controller is so strong that it will damage motor and power system probably. That’s the matter. An excellent ESC provides potent power without sacrificing safety, service life of power system. Xiongcai E8 is such an excellent product. With a series of protection includes low voltage, throttle loss, abnormal braking, over temperature, short circuit, abnormal Hall sensing, and more. Especially, the active free-wheeling and wave-by-wave current limiting. Active free-wheeling The original creative application of these two technologies will protect your motor and power system maximum. The active free-wheeling identification function can achieve microsecond track and response time, reducing MOS generating heat and avoiding excessive current pulse. Wave-by-wave current limiting E8 electronic speed controller (ESC) will monitor each wave of current and limit the peak of current. Maybe you ask whether current limit will affect the performance. The answer is negative. Actually, the limited part of current won’t help promote the performance of power system, but apply adverse effect on motor instead. So don’t worry about this, our team had verified it again and again. The wave-by-wave current limiting will protect motor and drivetrain effectively, prolonging service life of power system. These two technologies are always there, but maybe we are the only ones who use them in RC cars and RC trucks. We are one of the few companies that provide a full service from design, analysis, test to supply with 13 years of experience. You just use Xiongcai electronic speed controller (ESC) with confidence and leave the rest to us, we care about your experience. Contact us and have a try, you will have a better experience.

Minimum Order: 100

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:55 GMT
XC Electronic Speed Controller (ESC)-Priority Choice for RC Cars Trucks

You Should Choose XC Electronic Speed Controllers (ESCs) You Should Choose Xiongcai Electronic Speed Controller (ESC) For Your RC Cars and Trucks, why? Are the Castle MAMBA XL, Horizon Spektrum and HPI FLUX EHL-6S good? Yes, they are good, or excellent. But Xiongcai E8 is strong enough to compete with these established brands. How can a chaser say it with confidence? Here are some reasons. Firstly, High-performance we are a technological innovation-oriented company that always keeps developing advanced technology, and committed to delivering state-of-the-art technology and products. By comparing with famous brands mentioned above in performance, reliability and practicality, we developed E series of electronic speed controllers (ESCs), which can provide equivalent performance. For example, our E8 can handle 3-6S Li-Po Batteries, with 160A continuous current, so it can deal with anything the motor pours, allowing you to do any stunts you can think of. This video will show you that E8 is as excellent as the top brands. https://www.youtube.com/watch?v=YrLF1cN0XI0 E8 electronic speed controller features: 1. Current: Continuous current 160A, peak 320A 2. Cell: 3-6s Li-Po 3. Motor: Sensored or sensorless brushless motor, 240,000RPM max 4. BEC: 6.0V, 7.4V, 8.4V, continuous current 6A, peak 15A 5. Bluetooth: Parameter programming, firmware upgrade 6. Acceleration: 12 levels of acceleration, quick start like super car 7. Dimension: 59.8*48.2*35.9mm 8. Compatible with most of motors for RC hobbies Secondly, thermal performance We designed perfection protections for E8 electronic speed controller (ESC). Thermal management is meticulously designed. With a combination of forged Al heatsink, case and a 40mm fan, E8 allows maximum airflow throughout the system to cool critical component down for ultra-high performance and longer runtime; software will minimize the amount of time the components spend generating heat, taking thermal performance to a new level. Thirdly, unique technological applications Comparing to ESCs selling on market, we had two original creative technological applications use in our products. a) active free-wheeling achieve microsecond level of track and response, reducing MOS generating heat effectively and avoiding excessive current pulse; b) wave-by-wave current limiting will control peak of each wave of current to protect motor and drivetrain, prolonging service life of power system. E8 electronic speed controller (ESC) is able to monitor motor temperature if the motor is equipped with a temperature sensor. When the temperature of motor reaches the preset value, the ESC will shut it down or control performance of motor. More protections have been designed including low voltage, throttle loss, abnormal braking, abnormal Hall Sensing, over temperature, etc. Last but not the least, setting parameter on your mobile most of the ESC supplier designed a programming box for you, what does it do? Parameter setting, Of course, you know. They offer you the programming box as an accessory, but the cost is not included in the price you paid for the RTR radio control car. If you don’t have it, you can not adjust the parameters according to your requirement or skill. Xiongcai offers another option: mobile app, totally free of charge. You can manage hardware upgrade, parameter setting and data log, it’s more comprehensive and feasible. We are not as famous as Castle, Spektrum or HPI racing, but our E8 electronic speed controller is really a real thing, you will find that our ESCs can supplement your product portfolio and make your products more competitive in performance and price. Have a try.

Minimum Order: 100

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
3/29/24 6:54 GMT
Advantages of XC Electronic Speed Controllers ESC for RC Hobbies

Advantages of XC Electronic Speed Controllers (ESCs) for RC Hobbies E8 electronic speed controller features: 1. Current: Continuous current 160A, peak 320A 2. Output: 3-6s Li-Po 3. Motor: Sensored or sensorless brushless motor, 240,000RPM 4. BEC: 6.0V, 7.4V, 8.4V, continuous current 6A, peak 15A 5. Bluetooth: Parameter programming, firmware upgrade 6. Acceleration: 12 levels of acceleration, quick start like super car Dimension: 59.8*48.2*35.9mm 7. Compatible with most of motors for RC hobbies The best electronic speed controllers (ESCs) not only provide high-performance but also excellent operability and controllability. With 13 years of experience in this specialized field, Xiongcai ESCs perfectly achieve this. We have launched a series of electronic speed controllers (ESC) for RC hobbies, including RC cars, RC trucks, RC boats, RC planes and so on. with high- performance, operability and controllability. For example, XC202 E8 electronic speed controller (ESC). E8 electronic speed controller (ESC) is combined powerful hardware and software advancements that will redefine limits of RC Cars and Trucks. It is housed in rugged aluminum case integrating a 40mm blade fan to enhance performance and promote heat transfer dramatically. Advanced software will minimize the time the components spend generating heat, taking thermal performance to next level. E8 electronic speed controller (ESC) can handle 6S LiPo batteries, so it can deal with anything motor pours out. With 160A sustainable current, you can feel the ultimate driving experience and handling experience like super cars, you are able to do any stunts and show your skill. Built-in high power DCDC conversion circuit improves BEC loading capacity, keeping servo working at its best. Besides performance, E8 ESC provides excellent operability. You will see that many manufacturers designed a programming box for setting parameters. Xiongcai adopted another approach-developing a mobile application instead which connected via bluetooth. You can set each item on the app including running mode, acceleration, brake force, drag brake, turbo timing and more, simple, clear and convenient as showing below. We only focus on design and manufacture of electronic speed controllers, and we make them more powerful and easy to operate. To be honest, isn’t it more convenient to operate it on mobile phone than on a two-finger wide LCD screen? E8 electronic speed controller (ESC) for RC hobbies is designed with characteristics: 1. Quick response for start-up and linearity features. 2. Compatible with most of motors for RC hobby products. 3. Three running modes for different applications or driving skills (“Forward with brake”, “Forward/Reverse with brake” and “Forward/Reverse” mode). 4. Brake force adjustable. 5. Drag brake force adjustable, especially for beginner or training. 6. 12 levels of acceleration evokes your passion, gets you excited. Something you can’t feel in reality, but you can feel it here with E8 ESC. 7. Multiple protection measures: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection. Especially active freewheeling for microsecond response reducing heat and wave-by-wave current limiting for motor and drivetrain protection. 8. Turbo timing. It will start at full throttle to additionally increase motor RPM. 9. Quick setting. All parameters can be set on mobile app, simple and clear. 10. The firmware upgrade. You don’t need to find a wire to connect another box or computer, what you need to do is click the “firmware” button and upgrade it online, simple and convenient. 11. waterproof design. Epoxy potted for all weather conditions. Just drive. At present, we are not as famous as great brands such as Castle Creation, Hobbywing, Horizon Hobby, HPI Racing, Losi, Team Corally etc., but we are manufacturing superb quality products, adapting your products and making your product more competitive on both performance and price. Xiongcai XC202 E8 electronic speed controller is designed for ultimate handling experience, you just enjoy the driving, and we will take care of the rest. Contact us and have a try for ultimate handling experience.

Minimum Order: 100

Contact:
Phone:
Fax:
Email:
Lyon Gui
+8675523503296

Send Inquiry
Xiongcai Motor Controller Technology
Quanzhi S&T Innovation Park, shajing
Shenzhen 518104
China
9/2/23 2:00 GMT
ABB 3BHE004573R0142 UFC760 BE142 brand new and in stock

MOORE AUTOMATION LIMITED Contact Name: Britney Jiang (Sales Manager) ***Email***: sales7@askplc.com Whatsapp: +86 18020714921 Product Description ABB 3BHE004573R0142 UFC760 BE142 Brands We Supply SIEMENS, AB, ABB, GE, BENTLY NEVADA, Honeywell, HIMA, YOKOGAWA Shipping Methods DHL, Aramex, UPS, EMS, FedEx Product Category Honeywell Honeywell C200 :TC-FPDX , X2 ,TC-IDA161, TK-PPD011 , TK-OAV061 Honeyw , ell C300 :CC-PAIH01 , CC-PDOB01 , CC-TAIX01

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Britney Jiang
+86 18020714921

Send Inquiry
Moore Automation Limited
32D Guomao Building , No.388 , Hubin south Road , Siming district , Xiamen , Fujian,China
Xiamen , Fujian,China 361004
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   << Previous   |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   10  |   11  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2024 IMEXBB.com. All rights reserved.

IMEXBB.com