Paper, Packaging & Printing

PS Plate Developer 1、Adopting high-enginery materialswith excellent developing performance。 2、stable performance,full and clear mesh point. 3、Applicable to developing all kind of solar PS plate by hand or automatically. 4、Dilution ratio：original solution：water=1：6~8 Packing : 5L/cask ; 2cask/piece

Minimum Order: 1000

Product: panty-shape diapers hotmelt glue Model Number: SY-55 Description: Application: Mainly designed for rubber adhesive of non-woven goods, eisai and panty-shape diapers. Application: Mainly designed for rubber adhesive of non-woven goods, eisai and panty-shape diapers. Technical Data: Appearance:Clear yellow block Color:0-2 Softening point (R&B):80C Toxicity:innocuity Initial Tack:>20#ball Peel strength :> 15N/in Viscosity:3000CPs@150℃ Heat resistant: From below 5℃ to 80℃, holding power is 2 hours at 45℃, half an hour at 65℃. Suggested running temperature:155℃-175℃ Package:20kg/case , , 1kg/piece Storage:Store in a clean, dry area. Storage cycle:18 months. Note: Wear goggles and adiabatic gloves when working around hot melt machine.If the plant line stops for over 2 hours,The glue temperature should be tuned down below 120C or turn off the machine. Regularly maintaining and cleaning machine

Minimum Order: 1000

Product: sanitary towel hotmelt glue Model Number: SY-52 Description: Application: Mainly designed for application adhesive of non-woven goods and sanitary towel goods. Properties: Good initial tack, excellent holding power, light odor, no stringing, and good resistant oil-penetration and so on. Application: Mainly designed for application adhesive of non-woven goods and sanitary towel goods. Properties: Good initial tack, excellent holding power, light odor, no stringing, and good resistant oil-penetration and so on. Technical Data: Appearance:Clear yellow block Color:0-2 Softening point (R&B):70C Toxicity:innocuity Initial Tack:>15#ball Peel strength :> 10N/in Viscosity:2500CPs@150℃ Heat resistant: From below 5℃ to 70℃, holding power is 2 hours at 45℃, half an hour at 65℃. Suggested running temperature:155℃-175℃ Package:20kg/case , , 1kg/piece Storage:Store in a clean, dry area. Storage cycle:12 months. Note: Wear goggles and adiabatic gloves when working around hot melt machine.If the plant line stops for over 2 hours,The glue temperature should be tuned down below 120C or turn off the machine. Regularly maintaining and cleaning machine.

Minimum Order: 1000

It is used on all kinds of offset machine. With the ink,first print image on paper with the offset press, then transfer the image onto various materials by heat transfer press, especially for polyester fabric. Under high temperature, the ink will become gas and go into fabric. Advantages 1. High transfer rate. 2. Excellent color reproduction, gorgeous color, not color cast. 3.No crust in 28-30 days (open the cover),save 20% compared with other ink when printing on machine 4. Applicable to synthetic fabrics such as polyester fabric, smooth feel comfortable, no hard feeling. 5.Transferred pattern scratch-resistant, washable, non-cracking, no peeling, no fading, and good weather resistance. Packing 1kg/tin,12kg/carton. , carton inside

Minimum Order: 1000

Water-based corrugated paper box ink --- rich in color , different Varieties with three large series, respectively high-grade products, Medium-grade products and general-purpose products ,particularly Suitable for different types and requirements of the printing equipment. The products enjoy the following features: A:Products have passed SGS test and reached the relevant regulations Of the E uropean and American environment protection standards and directives; B:Superior abrasion resistance; C:Favorable water resistance; D:High color densitu and suitable for different speed printing equipment of all types; E:The screen dot printing shows higher transparency,higher gloss,clear in printing layers and pure color Color hue : close to the sample ; Odor : slight smell PH value : 8-8.5 <=15 ; Degree of fineness : 25-60S 1. Don`tuse this product until it is evenly stirred; 2. The remaining ink should be closely sealed after the container is Opened to avoid dust falling into the containers or it may surface crust and solidify; 3,If it is found to be higher in viscosity,running water or ethanol can be added to dilute the viscosity. 4,Protect the product from high temperature or exposure to the strong sunlight. Guarantee period is 12 months Packing : 20kg/drum or 200kg /drum

Minimum Order: 1000

Product Description Thermal CTP Plate TP-II 0.3mm is our self-developed high-quality printing plate specialized in thermal CTP platesetter. It is directly scanned by 830nm laser controlled by computer and put on press for printing after developing. The formulation designed by our own intellectual property and the unique manufacturing process. Model: TP-II Type: Positive 1. Thickness of aluminum base: 0.30mm 2. Application: High-quality commercial color printing 3. Specification: Sensitivity: 120-140mj/cm²; Dot reproduction: 1-99% (200lpi); Safe operation in fluorescent light: 8 hours; Run length before baking: more than 100,000; after baking: 200,000+ 4. Recommended platesetter: Infrared laser thermal platesetter with 830nm 5.Storage and Unpacking a) Light and heat can cause the thermal CTP plate to chemical change easily; Recommended condition Temp: 15-26 centigrade, RH less than 65%. b) Unpacking the outer package should be in yellow light or room light; the recommended plate-making room light should be yellow. c) Carrying plate gently; avoiding striking, folding and falling. d) Palletizing height: less than 1.2m. 7. Guarantee Period 12 months under above recommended storage condition Product Feature a) Unique formation design The sensitive layer is a unique formulation structure and it makes the dot edge which is formed with laser scanning more sharp and suitable for high-end commercial color printing. b) High-quality substrate Fine aluminum plate with complex grain construction, dense oxidized layer as its substrate. Not only ensures the adhesion of the thermal coating to the aluminum plate, but also makes the plate possessing excellent runlength and exact dot reproduction to guarantee high quality printing. c) Convenient bright room operation Imaged and processed under room-light condition without additional dark room, easier and more comfortable to operators. d) Outstanding platesetter compatibility Compatible with various thermal CTP platesetters available in current market

Minimum Order: 1000

ITEM: bopp thermal film Bopp lamination film on paper Welcome your inquiry! Process parameter: Equipment for laminating film: dry and wet film laminator Temperature: Normal :85~100oc Special:100~110 degree Roller pressure :10~18 Mpa Speed :8~50 m/min Remarks :Special laminations refer to those with thicker ink, solid color, high moisture content and bigger size paper. Applications: 1.Blueprint document,spray paintings,digital print 2.Cosmetic,gift medicine,liquor,etc 3.Promotional materials,photo album,catalogs,pictures,wedding photograph,coating on books and magazines,paper bag,non-drying adhesive,clothes lag Our mainly business : BOPP,PET, EVA,Holographic,metallized packaging film ,laminating films, etc. Storage The product should be stored in a dry,well vebtilated warehouse.To avoid direct sunlight,the product should not be stored in the open air. Safety Precautions Be away from fire and heat sources.Should not be stored or taansported together with chemicals

Minimum Order: 1000

FX-300 spray powder（currency electron and air style） FX-300 is general colour(mid ink)printing spray powder；Meshes:200-300（granularity:30-40M) Particle average,Good fluidity,Mostly using for print thick paper and colour print big area mid ink,Adopt professional craftwork of assimilation ink with powder,can solve the problem of prevent back printing,prevent dirty material well,Fast drying and solidify,prepare well for next step

Minimum Order: 1000

we produce all type numbering machine use for GTO ,MO, HAMADA etc printing machine,welcome to discuss with me if you have any request .

Minimum Order: 50

The MK60s is an entry-level strapping machine for customers who only strap a small number of packages but do not want to sacrifice efficiency and reliability. The strapping cycle runs semi-automatically and does not require a strap guide frame. The machine is easy to operate – after the strap is placed around the package by hand, the machine uses a heat-weld sealing unit to seal the strap ends. Our semi-automatic strapping machines are known for their superior quality and cost performance. With a 50,000 square meter super factory and large-scale production capabilities, we can meet your packaging requirements efficiently. Mastek products have been exported to more than 90 countries and have received a lot of positive feedback. We sincerely invite you to cooperate with us. Durable Sealing Head Japan Technology Sealing Head Dual DC motor>30,0000 times Easy Opertaion Straps delivery out automatic  Soft tightening straps during work Easy Adjustment Electrical tension adjustment  Electrical Fix Length adjustment  After-sales Service The machine comes with troubleshooting guidance and is easy to operate. The machine has global IoT capabilities and engineers provide remote services We have agents in 31 countries, such as Thailand, Malaysia, South Korea, Australia, Canada, the United States and other countries Shipping and Sales Delivery time: 15-45 working days Production capacity: 100sets/month Minimum order: 1 set Go to website:https://www.mastekpack.com/products/

Are you looking for high-quality strapping solutions to optimize your packaging efficiency? Discover Mastek Intelligent Packing Machinery (Suzhou) Co., Ltd., a leading provider of intelligent strapping machines and packaging automation solutions. We offer products like packaging machines and strapping heads. With a strong focus on back-end automated packaging for over 18 years, Mastek offers an extensive range of innovative products designed to meet your packaging needs. Our Strapping Head Advantages Our strapping heads have a strap breaking load of greater than 90%; Dust-free, smoke-free, low noise; It has an intelligent self-cleaning system to reduce maintenance costs; Equipped with intelligent belt end position detection to reduce manual inspection; About Mastek Mastek has a huge production facility covering an area of 50,000 square meters, with large-scale production capabilities, providing your business with a higher cost performance. With operations in more than 90 countries and agents in 31 countries, you enjoy comprehensive installation and after-sales service, supported by a team of more than 40 R&D engineers who continually develop new products to keep you going You're always on top of industry trends. Shipping and Sales Delivery time: 15-45 working days Production capacity: 100sets/month Minimum order: 1 set Contact us to discuss your specific needs and witness the transformative power of our cutting-edge technology.

①M Shape Turntable 800KG load weight, 1650mm size, it is normally suitable for European pallet. M shape turntable is easy for Pallet Jacks or AGV to load pallets on machines (If the pallet size is more than 1.2 × 1.2m or the pallet weight is more than 800KG, we recommend using a 1500KG loading turntable with optional manual pallet jack ramp to load the pallet onto the machine) ②Moving Frame  Servo Driven Frame is a standard feature on the MK900, which allows MK900 to accommodate different pallet sizes at the same time. Working with turntable, Patten will be :2x0   2x2   0x2    ③Fully Automatic Wrapping Film Function  Film carriage with 250% pre stretch rate, fully automatic cutting and clamping film function, the stretching function DOES NOT require manual operation, and the operation is safe and convenient. Pallet Strapping & Wrapping All In One Save Labor & space ● Fully automatic strapping machine for both PET and PP. Servo drive moving frame is suited to different pallet sizes. ● Fully automatic wrapping machine with 250% pre-stretch SMART Operation System High efficiency ● Operation guidance (show on screen) Smart Alarm & solution find in screen  ● Fully automatic cutting and clamping film   ● Remote start machine Durable parts&Multiple service Reliable Quality ● Ultrasonic Strapping Head SIEMENS Electric parts, SICK sensor... ● 3 years Warranty for Strapping Head ● IoT remote service +7x24 technical support service High Compatibility Turntable: MK900 Pro 1800mm Turntable with maximum 1500KG load weight, maximum suitable for 1.25x1.25m pallet. Suitable for all kinds of pallet shape (Straps Though Hole Should over 250mm lengthx80mm high)ramp for hand pallet jack to load the pallet on machine. HEMAX AGV System:HM01 (Base on SRC Laser SLAM) 1000KG maximum load weight, Lifting Height 174mm, fork Height 104 Laser Radar + 3D Havcam 8 Hours working time Accurate Positioning +/- 10mm Strapping Machine form Mastek Looking for intelligent strapping machines and packaging automation solutions? Mastek is your go-to destination. With a focus on designing, researching, and manufacturing high-quality strapping machines and carton erectors, we have been revolutionizing the back-end automated packaging industry for over 18 years. Our Mastek MK300, MK600, and MK900 and other series of products, are renowned in over 30 countries and regions, including Thailand, Malaysia, Canada, Mexico, Australia, and South Korea. MK900 TECHNICAL DATA MK900 STANDARD FEATURES Performance: Strapping Head Top-mounted Utrasonic SEPOII Packing speed : Approx. 25-30 pallet/hour (Depending on product height and width) PLC Control SIEMENS Inverter SIEMENS Maximum pallet size 1200mm*1200mm（EUR-pallet） Touch Screen Mastek IoT Screen /SIEMENS Maximum load height 500mm（standard）- 1500mm Up and down motor SEW motor Minimum load size 1000*800mm(W*H) Sealing head motor Servo motor Maximum load weight 800KG（2000KG Optional） Sword moving motor Servo motor Tension range 500-3000N (adjustable) movable frame motor Servo motor Straps feeding speed 2m/second Sensor SICK Joint sealing length 30mm Turntable type 1650mm M shape Straps System Recipe 12 Modes PET 1208（12mm wide/0.8mm thickness） Film carriage pre strech rate 2.5 1508（15mm wide/0.8mm thickness） Cutting and clamping film Full automatic 1908（19mm wide/0.8mm thickness） Strap tension Adjustable via touch panel PP 1510（15mm wide/1.0mm thickness） Sealing unit self clean system Have Stretch Film End of strap signal Automatic detect 10-15KG 500mm high 14-23mic 300% stretch rate 230mm diameter 76mm paper core Strap Coil Dispenser: Certification CE Maximum Coil size 600-760mm diameter* 150mm width Technical support 24hrs x7 days a week Coil Inner diameter 406mm+10mm Machine Warranty One year (3 years for strapping head) Pneumatic Data Air consumption 2-3CFM @ 60-80 PSI Optional Electricity: ①Turntable 2000KG load turntable with Ramp Power consumption: 7KW ②AGV HEMAX 01 Voltage 380V /415/480V/50or 60Hz 3phase ③Top Protection sheet folding device For 5mm Paper sheet Machine weight 1800KG ④Top edge protector applicator 100pcs *100mm*50/50mm*5mm (paper) Machine size 3902*1581*2388mm ⑤Strapping head Friction type (Only PET)

Welcome to Mastek, a leading provider of innovative carton packing machine solutions and packaging automation technology. We provide strapping machines, carton erector and sealing machines, pallet wrapping machines and other products. Mastek Carton Packaging Machines Equipped with troubleshooting startup capabilities to quickly identify and resolve issues, minimizing downtime. Use high-quality key accessories, such as SEW motors, Siemens PLC, SICK sensors, etc. The system comes with functions such as operation guidance, intelligent alarms and solutions, making it easy to operate and maintain. 7*24 after-sales service, 3-year warranty. Mastek Advantages We have 18 years of back-end automated packaging experience and knowledge, a 50,000 square meter super factory, successfully exported our machines to more than 90 countries, and established an agent network in 31 countries. We have established long-term cooperative relationships with many world-renowned companies such as Lenovo, Hikvision, CATL, Kraft Foods, etc. We ensure that our carton packing machines meet the ever-changing needs of various industries. Our engineers are available to provide prompt assistance and troubleshooting anywhere in the world. We have established local dealer services in Thailand, Malaysia, South Korea, Australia, Canada, the United States and other countries. Localized support can be provided to ensure efficient maintenance and repairs. We can deliver within 15-45 working days, depending on specifications and customization requirements. Contact us today to discuss your requirements and revolutionize your packaging operations.

What is Cold Forming Aluminum Foil? Cold forming aluminum foil is a high-barrier laminated material used in pharmaceutical packaging. It is composed of multiple layers of different films through a lamination process, with the core layer being O-temper (soft) aluminum foil. This structure provides excellent deep-drawing performance. Structure of Cold Forming Aluminum Foil A typical cold forming aluminum foil has three layers: Nylon (OPA) layer: Outer layer, provides excellent ductility and abrasion resistance, protecting the aluminum foil core. Aluminum (AL) layer: Middle layer, the core of the structure, offering nearly 100% barrier properties against water, oxygen, and light. PVC (Polyvinyl Chloride) layer: Inner layer, directly contacts the medicine, providing good heat-sealing performance for blister sealing with PTP lidding foil. Common Alloys for Cold Forming Aluminum Foil 8011 Alloy: The classic pharmaceutical grade. Even distribution of Fe and Si forms fine intermetallic compounds, ensuring smooth cold stamping to form PTP blisters (with forming depth up to 3–5mm) and special-shaped closures. It resists “necking fracture” even in thin-wall areas, covering more than 90% of pharmaceutical forming requirements. 8021 Alloy: Improved plasticity compared to 8011, more suitable for highly complex structures such as multi-cavity blisters and tearable-seal foils. After forming, rebound rate ≤2%, ensuring precise packaging dimensions. 8079 Alloy: Excellent performance in ultra-thin gauges. At 0.025mm thickness, it still maintains outstanding formability, suitable for micro-dose blister packs (e.g., mini capsules), helping reduce material waste and lower packaging costs. Product Information Alloy Grades: 8011, 8021, 8079 Temper: O-temper (annealed soft) Thickness: 0.025mm – 0.08mm Width: Customized (standard 60mm – 1000mm) Length: Customized Surface: Clean and bright, free from oil spots, scratches, and black spots Delivery Form: Aluminum foil rolls, slit coils, pharmaceutical-grade laminates Application: Packaging of tablets, capsules, suppositories, etc. Samples: Available MOQ: 1–3 tons Advantages of Using Cold Forming Aluminum Foil in Pharmaceutical Packaging 1.Excellent Barrier Properties: Its thick aluminum layer completely blocks moisture, oxygen, light, and bacteria, effectively protecting sensitive medicines and significantly extending shelf life. 2.Outstanding Formability: Soft aluminum ensures no cracking or pinholes during cold forming, enabling blister cavities of various depths and shapes, ideal for irregular tablets or capsules. 3.Safety & Compliance: Non-toxic, harmless, and fully compliant with pharmaceutical packaging standards. Safe for direct contact with medicines. Application Fields Pharmaceutical cold-formed blister packaging Moisture-proof, oxidation-proof packaging for tablets, capsules, and powders Packaging for high-end biopharmaceuticals and prescription drugs Sealed packaging for specialty chemicals and healthcare supplements Company Profile We specialize in providing one-stop packaging material solutions for pharmaceutical enterprises. With years of industry experience and a strict quality control system, we deliver not only premium products but also professional technical support and customized services to meet your unique packaging needs. Our product range includes: 1–8 series aluminum foil, double zero foil, PTP foil, ALU- ALU foil, PVC rigid film, PVC/PDC rigid film, etc. Sizes can be customized, with optional surface printing services. Our products are exported worldwide, with strong sales in Southeast Asia, Europe, and other regions. If you are looking for pharmaceutical cold forming aluminum foil with excellent formability, superior barrier performance, and safety compliance, please contact us anytime. We offer free samples, factory visits, and full technical support to ensure your confidence in our product quality. Why Choose Us? 1.Customized Production: Thickness 0.025–0.08mm available, cut-to-size on demand. Value-added processing options such as “pre-embossing” and “pre-coating” are available to shorten your downstream production cycle. 2.Fast Delivery: With 3 specialized cold forming foil production lines, we maintain ample stock of standard sizes. Small orders (<500kg) can be shipped within 72 hours, and large orders (≥10 tons) within 25 days. 3.Technical Support: A dedicated 5-member pharmaceutical packaging technical team offers free consultation on foil selection and forming process optimization, assisting clients in solving packaging challenges. 4.After-sales Guarantee: In case of product quality issues leading to production loss, we commit to respond within 48 hours, provide full refund/replacement, and cover related costs — ensuring zero-risk cooperation.

Minimum Order: 3120